Arriba

Impresión > Impresión 3D > Picos Nozzle

Mostrar: 
Mostrar del 1 al 24 (de 154 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Kweiny Mk10 Boquilla Para Printer 3d Makerbot Piezas Y Extru
    Precio:  $4,029.00

    Kweiny Mk10 Boquilla Para Printer 3d Makerbot Piezas Y Extru

    -Titulo Original : Kweiny MK10 Nozzle for 3D Printer Makerbot Parts and Extruder Cleaning Tools Kit | M7 Thread 0.4mm Brass Nozzle 5 Pieces and 2PCS Drill Bit for It-Fabricante : KWEINY-Descripcion Original: Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament's temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle. // Compatibility: Fit with MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc. // Quantity and specification: M7 thread 0.4mm nozzle 5 pieces. 0.4mm Nozzle cleaning drill bit 2 pieces. For detailed dimensions, please refer to the drawings in the upper left. // Material: Nozzle is brass. Nozzle cleaning drill bit is stainless steel SUS304. // Durability: Nozzle cleaning drill bit can be used heaps of times, because of SUS304 stainless steel material. It will neither rust nor be broken, no matter how it is used.You only need one to solve all the same size nozzles blockage problems. // 1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts; 2. Don't use the needle to clean until the nozzle is heated to above 200℃(392℉).You can twist the needle to make it easier to clean up; 3. Sharp parts, please keep away from children. MK10 hotend M7 thread aluminum heater block; 0.4mm; 1.75mm/3mm; M7; Brass. 0.4mm nozzle; 0.4mm*1PCS, 0.35mm*1PCS; 70mm/2.76in; Stainless steel SUS304. 5 pieces; 2 pieces...
  • Boquilla RepRap M6 resistente al desgaste con revest. 0.25mm
    Precio:  $5,869.00

    Boquilla RepRap M6 resistente al desgaste con revest. 0.25mm

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle RepRap - M6 Thread 1.75mm .25mm (All Printers with a E3D V4 / V5 / V6 1.75 Hotend/Prusa i3 MK2 / MK2S / MK3)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: E3D V5-V6 Hotend with 1.75mm Filament // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .25mm // Made in USA by Micro Swiss // This is RepRap style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Micro Swiss MK8 Chapado A2 Herramienta de acero 0.8
    Precio:  $7,609.00

    Micro Swiss MK8 Chapado A2 Herramienta de acero 0.8

    -Titulo Original : Micro Swiss MK8 Plated A2 Tool Steel Wear Resistant Nozzle (MakerBot, CraftBot, Creality CR10, Tevo Tornado) .8mm-Fabricante : MICRO-SWISS-Descripcion Original: A2 Hardened Tool Steel Plated with TwinClad XT // Fits: MK8 Extruders, Creality CR-10, Tevo Tornado, MakerBot, CraftBot, BQ Witbox // 1.75mm Filament // Orifice size: .8mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • 3d Printer Nozzles 20pcs Stainless Steel Mk8 Extruder Nozzle
    Precio:  $3,329.00
    Expira: 20/11/2021

    3d Printer Nozzles 20pcs Stainless Steel Mk8 Extruder Nozzle

    -Titulo Original : 3D Printer Nozzles 20PCS Stainless Steel MK8 Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm With Storage Box Spanner For 3D Printer Makerbot Creality CR-10-Fabricante : Kingroon-Descripcion Original: - Reemplazo QUETTERLEE Nuevo CPU + GPU Ventilador de refrigeración para Acer Nitro 5 Gaming Laptop AN515-55-59KS AN515-54-5812 AN515-54-728C Serie DFS531005PL0T FL78 DFS561405PL0T FL1K DC5V 0.5A Ventilador QUETTERLEE Reemplazo Nuevo CPU + GPU Ventilador de refrigeración para Acer Nitro 5 Gaming Laptop AN515-55-59KS AN515-54-5812 AN515-54-728C Serie DFS531005PL0T FL78 DFS561405PL0T FL1K DC5V 0.5A Ventilado...
  • Boquillas M6 15 piezas 0.2/0.4/0.6/0.8/1.0mm + 5 Agujas
    Precio:  $4,639.00

    Boquillas M6 15 piezas 0.2/0.4/0.6/0.8/1.0mm + 5 Agujas

    -Titulo Original : AFUNTA 15 PCS M6 3D Printer Stainless Steel Nozzles Print Heads Extruder Compatible 1.75mm E-3D Makerbot & ANET A8 & Creality CR-10, 5 Sizes (0.2/0.4/0.6/0.8/1.0mm) + 5 Sizes Cleaning Needles-Fabricante : Afunta-Descripcion Original: NOTA: Después de reemplazar la boquilla, recalibre la distancia entre la boquilla y la placa de construcción para garantizar la calidad de las piezas de impresión. COMPATIBILIDAD: Las boquillas de esta impresora son compatibles con Anet A8, Creality CR-10, Tevo Tarantula, E-3D makerbot, duplicator, prusa i3 y reprap. MATERIAL Y TAMAÑO: Las boquillas de estas impresoras están hechas de acero inoxidable, Rosca exterior: M6, Diámetro del filamento: 1.75 mm, Diámetro de salida: 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm, 1.0 mm. AGUJAS DE LIMPIEZA DE BOQUILLAS: las agujas de limpieza de 5 piezas tienen 5 tamaños diferentes: 0.2 mm, 0.4 mm, 0.6 mm y 0 .8 mm, adecuadas para limpiar la mayoría de las boquillas de su impresora 3D. CALIDAD PREMIUM: las agujas de limpieza están hechas de acero inoxidable de alta calidad, flexible, resistente y duradero. Con un mango, puede girar el taladro cuando lo use...
  • Sindoh RDP14100 AS 3Dwox Dp200 / 1 Boquilla (Dp200 y 3Dwox 1
    Precio:  $54,909.00

    Sindoh RDP14100 AS 3Dwox Dp200 / 1 Boquilla (Dp200 y 3Dwox 1

    -Titulo Original : Sindoh RDP14100-AS 3Dwox Dp200/1 Nozzle (Dp200 and 3Dwox 1 Only)-Fabricante : SINDOH-Descripcion Original: Sindoh // Nozzle // 3Dwox Dp200 3D printer // 3Dwox Dp200/1 nozzle (Dp200 and 3Dwox 1 only). 3Dwox Dp200/1 nozzle helps users build better models with rigid materials such as PLA and ABS...
  • Correa eje Y para impresora 3D Creality Ender-3
    Precio:  $5,619.00

    Correa eje Y para impresora 3D Creality Ender-3

    -Titulo Original : CHPOWER Upgrade 4020 Y-axis Synchronous Belt Stretch Straighten Tensioner for Creality 3D Printer Ender-3 Aluminum Profile 40x20mm, Black -Fabricante : CHPOWER -Descripcion Original: New N2QAYB001023 Replace Remote fit for Blu-Ray Player DMP-BDT270 DMP-BDT271 DMP-BDT175 DMP-BDT174 DMP-BDT171 DMP-BDT170 DMP-BDT166 DMP-BDT165 DMP-BD833 DMP-BD83; Pre-programmed, No program required; Just install brand new battery to use; Package included: 1 x Remote Control; ...
  • Boquilla Original E3D V6 1.75mm x 0.40mm V6-NOZZLE-175-400
    Precio:  $3,739.00

    Boquilla Original E3D V6 1.75mm x 0.40mm V6-NOZZLE-175-400

    -Titulo Original : E3D V6 Extra Nozzle - 1.75mm x 0.40mm (V6-NOZZLE-175-400)-Fabricante : E3D-Descripcion Original: pequeño cable recordatorio le recuerda que debe bloquear su motocicleta y le ayuda a recordar que tiene un bloqueo de disco conectado para que no se dispare y dañe su motocicleta, solo necesita conectar el cable recordatorio al disco bloquear y enganchar el manillar FIT ALL DIS BRAKE Lock: simplemente se conecta a la palanca del freno y Disc Lock es un recordatorio visual. Previene daños potenciales y la vergüenza causada por alejarse mientras el disco está activado SUPER ESTIRAMIENTO: debido a la alta elasticidad del cable de más de 120 cm, puede asegurar los bloqueos del disco de freno en cada tipo de motocicleta; Diámetro exterior del cable metálico: aprox. 3,5 mm; Diámetro interno del cable metálico: aprox. 2mm DISEÑO DURADERO Y FLEXIBLE: hecho de material de aleación de PVC + de alta calidad, procesamiento de superficie lisa, buena resistencia al agua, puede garantizar un tiempo de servicio prolongado CABLE MULTIFUNCIONAL: el cable de bloqueo de seguridad práctico no solo es adecuado para el recordatorio de bloqueo del freno de disco, como la seguridad de los frenos, como motocicletas, scooters, cruceros, helicópteros, bicicletas deportivas, bicicletas de carreras, pero también es ideal para la supervivencia, acampar, pescar, amarrar cargas y flejes de equipaje, etc...
  • AJSPOW 20 un. Actualización de la Printer 3D Boquilla Resist
    Precio:  $4,039.00

    AJSPOW 20 un. Actualización de la Printer 3D Boquilla Resist

    -Titulo Original : AJSPOW 20PCS 3D Printer Nozzles | Upgrade Abrasion Resistant 0.4mm MK8 Nozzles | Brass 3D Printer Nozzle for 3D Printer Anet A8 Makerbot Creality CR-10 Ender 3-Fabricante : AJSPOW-Descripcion Original: 【Parameter】Input diameter 1.75mm, out thread: M6. // 【Premium Materials】The 3D printer nozzles are made of high quality brass material, sturdy and durable, brass can be used to print PLA, ABS and most any other non-abrasive materials. // 【Characteristics】MK8 Nozzle through long-term testing to solve the problem of plugging and missing materials to the greatest extent, low thermal conductivity, resistant to corrosion, high abrasion resistance. // 【Applicability and Compatibility】MK8 extruder nozzle fit for 3D printer Makerbot Anet A8, Creality CR-10 CR-10S S4 S5, compatible with all 1.75mm PLA, ABS 3D printer. // 【100%Satisfaction Guarantee】Our team strives for 100% customer satisfaction with manufacturers provided lifetime guarantee. If there are any problems with our products, contact us and we would be very happy to solve your problems. //...
  • CCTREE 10 un. MK8 Boquilla Extrusora para Printer 3D Makerbo
    Precio:  $3,309.00

    CCTREE 10 un. MK8 Boquilla Extrusora para Printer 3D Makerbo

    -Titulo Original : CCTREE 10pcs MK8 Extruder Nozzle for 3D Printer Makerbot Creality CR-10 Ender 3 5 Different Size 0.2mm, 0.4mm.0.6mm.0.8mm,1.0mm-Fabricante : CCTREE-Descripcion Original: Input Diameter :1.75mm // Output Diameter: 0.2mm,0.4mm,0.4mm.0.6mm.0.8mm,1.0mm // Material: Copper (Brass) // 10Pcs Extruder Brass Nozzle // 5 different size (each size 2pcs) // Specification:13mm*6mm Material: Brass of National standard Weight:2g Nozzle Precision:0.2mm/0.4mm/0.6mm/0.8mm/1.0mm Hexagon Diameter:6mm Screw Thread :M6 Input Diameter: 1.75mm Package Included: 10x nozzles Size:0.2mm,0.4mm,0.6mm,0.8mm,1.0mm Each size 2pc...
  • Kit de 41 Piezas para Impresoras 3d V6
    Precio:  $6,319.00

    Kit de 41 Piezas para Impresoras 3d V6

    -Titulo Original : HAWKUNG 41 Pcs 3D Printer Accessories Kit, 10 Nozzle + 3 Heater Block + 3 Throat Tube + 3 V6 Silicone Socks + 10 Cleaning Needle + Other Parts for V6 3D Printer 1.75mm Extruder Hotend-Fabricante : HAWKUNG-Descripcion Original: Aguja de limpieza: 10 agujas flexibles de acero inoxidable para un mantenimiento cuidadoso de sus boquillas y lugares de difícil acceso como los engranajes de alimentación. V5 V6 Boquillas: Material: latón, Tipo de rosca: M6, Diámetro de salida: 0,4 mm; Diámetro del filamento de entrada: 1,75 mm, Compatible: Filamento hotend extrusor V5 y V6, compatible: ABS / PLA / PETG / Fibra de carbono Llaves: La llave para boquillas facilita la instalación y extracción de la boquilla. Adecuado para boquillas con un diámetro de 6 mm, como boquillas MK8, boquillas E3D V5 V6, etc. Llave para bloque calefactor sólo apta para bloque térmico V6. La llave Allen facilita el montaje y desmontaje de tornillos pequeños. Pinzas: las pinzas de impresión 3D son adecuadas para el mantenimiento de boquillas y para limpiar el exceso de material de soporte; son pinzas de precisión antiestáticas y no magnéticas. Calcetines de silicona: mantendrán su bloque calefactor limpio y libre de plástico quemado y ennegrecido. Ayuda a mantener la temperatura del hotend extremadamente estable, especialmente si usa enfriamiento de alto flujo de aire alrededor de la boquilla para enfriar la impresión. Parámetro: Boquilla V6: Color: dorado Material: latón Tipo de hilo: M6 Diámetro de salida: 0,4 mm; Diámetro del filamento de entrada: 1,75 mm Compatible: Filamento hotend extrusor V5 y V6 Soportado: ABS / PLA / PETG / Fibra de carbono Tubo extrusor: Tipo: cuello de boquilla Material: Acero inoxidable Longitud: 22 mm Rosca externa: M6 Diámetro del filamento: 1,75 mm Bloque calefactor: Color plata Material: Aluminio Dimensiones: 20 * 16 * 12 mm (L * W * H) Orificio interior para tornillo de instalación: M6 y M3 (tubo de calor y termopar) Funda de silicona V6: Material: silicona Color azul Adecuado para el tamaño del bloque de calor: 20 x 16 x 12 mm (L x W x H) Tubo de teflón PTFE: Material: PTFE (politetrafluoroetileno) Tamaño: diámetro exterior: 4 mm, diámetro interior: 2 mm Color blanco Longitud: 1m La densidad es 2.15-2.20g / cm3 y la resistencia al calor es tan agradable que sus temperaturas pueden alcanzar los 260 ℃ Accesorios PC4-M6: Tubería de PTFE OD: 4 mm Hilo: M6 / 3 mm Material: cobre, plástico Color: dorado + azul Accesorios PC4-M10: Tubería de PTFE OD: 4 mm Hilo: M10 / 6 mm Material: acero inoxidable, plástico Color: negro + plata Lista de empaque: Boquilla de latón V6 de 10 x 0,4 mm Aguja de limpieza de 5 x 0,35 mm Aguja de limpieza de 5 x 0,4 mm 3 x bloque calefactor de aluminio 3 x tubo de garganta del extrusor 3 x calcetines de silicona V6 2 x cuchillo de paleta 2 x pinzas 2 x conexión rápida PC4-M6 2 x racor neumático recto PC4-M10 1 x llave de boquilla 1 x llave de bloque calefactor 1 x llave Allen 1 tubo de teflón de 1 ...
  • Impresora 3d Boquilla Kit De Limpieza 0.4mm Agujas Y Pinzas
    Precio:  $4,039.00

    Impresora 3d Boquilla Kit De Limpieza 0.4mm Agujas Y Pinzas

    -Titulo Original : 3D Printer Nozzle Cleaning Kit - 0.4mm Needles and Tweezers Toolkit - Stainless Steel Nozzle Cleaning Tool Kit - Set of 12-Fabricante : ZEELO-Descripcion Original: Great quality tweezers and 10pcs of 0.40mm nozzle cleaning needles packed in one safe container! // Anti-Static, Non-Magnetic Straight and Angled Precision Tweezers; Every tweezers is plated resistive ESD coating, which prevents static damage to electronic components. Great for nozzle maintenance and cleaning excess support material // 10 pcs of 0.40mm diameter flexible stainless steel needles; Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears // Handy, safe and stylish container; All of the items come in a neat plastic tube with a screw lid to keep them well organized and safely together // Compatible with most well known 3D Printers on the market (e.g. Duplicator, MakerBot, RepRap etc.) //   The needles aremade of quality stainless steel, flexible and won't break easily, with a handlefor easily twisting. The tweezershave Fine tips with non-magnetic coating. Great for repairing small wires,screws, circuit board welding,  watch and reaching where your fingers can't.Suitable for high-density integrated circuit chip within the operation Wide suitable:Compatible with most of 3D printers on the market such as Duplicator, MakerBot,RepRap etc.   Wrapped in aplastic box, well organized, easy to find while you need it.   Needle: Material: stainlesssteel Needle diameter:0.4 mm The Needlelength: 7.5 cm The length ofshank: 3 cm Total length:10.5 cm   Total length: Straighttweezer: 12cm Angled tweezer:12.5cm   2 Tweezers and10pcs of 0.40mm needles for cleaning and unclogging 3D printer nozzles.  Comesin a hard plastic tube for convenient storage...
  • Impresora 3D Bronce V6 Extra Boquilla 3DMV6 4 un. 1,75 mm 0,
    Precio:  $4,039.00

    Impresora 3D Bronce V6 Extra Boquilla 3DMV6 4 un. 1,75 mm 0,

    -Titulo Original : 3D Printer Brass V6 Extra Nozzle 3DMV6-4Pcs 1.75mm 0.20mm/0.4mm/0.6mm/0.8mm (4pcs 0.2mm)-Fabricante : 3D MATALCHOK-Descripcion Original: We choose the best materials that we can find on market combined with high precision CNC maching to bring this high quality nozzles. // We strictly following the latest drawing to achieve best print result. // The flat surface tip of the nozzle which flattens down the layer is custom machined to each nozzle size.A small nozzle tip gives you high precision,and a wide nozzle tip assists in the smooth printing of larger layers. // A full collection of 3DMV6 Ecosystem nozzles,set in a soft foam cushion for protection.Print all the things in all the resolutions! // Compatible with V5/V6 heating block hotend extruder // Size: We choose the best materials that we can find on market combined with high precision CNC maching to bring this high quality nozzles.We strictly following the latest drawing to achieve best print result.The flat surface tip of the nozzle which flattens down the layer is custom machined to each nozzle size.A small nozzle tip gives you high precision,and a wide nozzle tip assists in the smooth printing of larger layers.All nozzles in the series are now individually identifiable with markings on the flats of the hex head making them even more convenient to work with.See the table on the left for identification.A full collection of 3DMV6 Ecosystem nozzles,set in a soft foam cushion for protection.Print all the things in all the resolutions! 12.5 mm * 7 mm 0.05mm-0.35mm 6mm 0.2/0.4/0.6/ 0.8 mm 1.75mm Filament 4pcs V6 Nozzle...
  • Impresora 3d M7 Rosca Mk10 Boquilla Para 1.75mm Filamento .2
    Precio:  $6,949.00

    Impresora 3d M7 Rosca Mk10 Boquilla Para 1.75mm Filamento .2

    -Titulo Original : 3D Printer M7 Thread MK10 Nozzles for 1.75MM Filament .2mm .3mm .4mm .5mm .8mm 1.0mm (1 Each) Wanhao Dupicator D4/I3 Makerbot 2-Fabricante : DAEWON INDUSTRIES-Descripcion Original: Quality Brass Nozzles // Wide array of sizes // M7 thread MK10 printer nozzles .2mm .3mm .4mm .5mm .8mm 1.0mm // Wanhao Dupicator D4/I3/Dremel nozzles // Makerbot 2 nozzles // Includes: Material: Brass Filament inlet: 1.75mm Fit for: Wanhao Dupicator D4/I3 and various Makerbot 3D Printers FlashForge Creator Pro FlashForge Creator X FlashForge Dreamer Dremel Idea Builder​ PowerSpec 3D Pro​ Wanhao Duplicator 4S Wanhao Duplicator 4X Wanhao i3 Monoprice Maker Select 3D Printer v2 Cocoon Create 3D Printer...
  • Ender 3 3d Impresora Calentador Bloque Cubierta De Silicona
    Precio:  $3,669.00

    Ender 3 3d Impresora Calentador Bloque Cubierta De Silicona

    -Titulo Original : Ender 3 3D Printer Heater Block Silicone Cover MK7/MK8/MK9 Hotend for Creality Ender 3, Ender 5, Ender 3 Pro, CR-10,10S,S4,S5 ANET A8 and Extruder Nozzle 0.4mm Print Head for Mk8 Makerbot-Fabricante : SKOPHY-Descripcion Original: Made of non-stick silicone material // Helps to keep the hotend temperature extremely stable // Can extend the life of the heater block and extruder by keeping it cleaner // High temperature resistance: 280℃ // Professional for 3D printer extruder // Material:Silicone Color: Black Item Weight: 2g Item Size: 22 x 22 x 15mm/ 0.66 * 0.66 * 0.6in (approx.) 3 x Silicone Cover 3 x Extruder Nozzle 0.4mm Skophy are devoted to offer premium quality products to all cherished customers. Meanwhile supply 45 days money back guarantee and 18 months warranty. If there are any questions, please feel free to contact us, Skophy Customer Service Team will spare no efforts to assist with you within 24 hours...
  • Impresora 3d Mk8 Boquilla Con 10 Un. Kit De Agujas De Limpie
    Precio:  $3,669.00

    Impresora 3d Mk8 Boquilla Con 10 Un. Kit De Agujas De Limpie

    -Titulo Original : 3D Printer MK8 Nozzle with 10PCS Cleaning Needles Kit, 20pcs 0.4mm Nozzle + 2pcs (0.2 0.3 0.5 0.6 0.8 1.0mm) Brass MK8 Extruder Head Hotend Nozzle 1.75mm Filament for Creality Cr-10 Makerbot Anet A8-Fabricante : UMLIFE-Descripcion Original: ❃❃ Universal, precision machined brass nozzles for use extruding with most 3D printers. // ❃❃ Diameter: input diameter: 1.75mm; output diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm. // ❃❃ This extruder brass nozzle print head with lettering, and the screw head connection which can be well connected to the other end. // ❃❃ The nozzles surfaces are glossy, the chamfers and internal face are rounded and smooth which can reduce the resistance and avoid blocking of the filament, the contact surface can prevent the leakage from the nozzles // ❃❃ Great nozzle replacement for Prusa i3, Anet A6 3D-printer, Wanhao 3D-printers, MakerBot Replicator 2, MakerBot Replicator 2x, MakerBot 5th Generation, etc. // A proper nozzle is one of the most integral components to getting the 3D prints you want. A nozzle may suffer normal wear and tear, either through internal striations from course materials or external damage from contact with your 3D printer’s build plate.Brass, as an excellent conductor of heat, is an ideal material for a 3D printer nozzle. This part is machined from brass metal alloy. With an input diameter of 1.75 millimeters, it will thread into the existing heater block and thermal barrier tube hot end assembly. Material: BrassInput Filament Diameter: 1.75mmScrew Diameter: 6mmWeight: About 2g/eachNozzle diameter: sizes include 0.2mm,0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm 2PCS X 0.2mm MK8 Nozzle2PCS X 0.3mm MK8 Nozzle2PCS X 0.5mm MK8 Nozzle2PCS X 0.6mm MK8 Nozzle2PCS X 0.8mm MK8 Nozzle2PCS X 1.0mm MK8 Nozzle 2PCS X 0.2mm Cleaning Needle2PCS X 0.3mm Cleaning Needle2PCS X 0.4mm Cleaning Needle2PCS X 0.6mm Cleaning Needle2PCS X 0.8mm Cleaning Needl...
  • Micro Swiss MK8 Chapado A2 Herramienta de acero 0.6
    Precio:  $7,609.00

    Micro Swiss MK8 Chapado A2 Herramienta de acero 0.6

    -Titulo Original : Micro Swiss MK8 Plated A2 Tool Steel Wear Resistant Nozzle (MakerBot, CraftBot, Creality CR10, Tevo Tornado) .6mm-Fabricante : MICRO-SWISS-Descripcion Original: A2 Hardened Tool Steel Plated with TwinClad XT // Fits: MK8 Extruders, Creality CR-10, Tevo Tornado, MakerBot, CraftBot, BQ Witbox // 1.75mm Filament // Orifice size: .6mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Set Bloque Termico Barral Y Boquilla Para Mk8 Imp. 3D -VG48
    Precio:  $4,519.00

    Set Bloque Termico Barral Y Boquilla Para Mk8 Imp. 3D -VG48

    -Titulo Original : ExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle and 5pcs Heater Blocks Hotend for MK8 Makerbot ANET A8 3D Printer (Bonus: 2pcs hex Key Wrenches)-Fabricante : ExcelFu-Descripcion Original: 5x 3D Printer Nozzle Throat Tube + 5x Nozzle Print Heads + 5x Heater Blocks Hotend + 2x Hex Key Wrenches(for MK8 Makerbot Reprap Prusa I3 3D Printer) Nozzle Throat Tube: Material - Stainless Steel; Outer Thread - M6; Inner Diameter - 2mm; Length - 30mm; Filament Diameter - 1.75mm 0.4mm Extruder Brass Nozzle Print Head: Color - Golden; Material - copper (brass); Size - 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm Hex Key Wrench: Diameter - 2mm and 3mm; Shape - Hex Compatibility: compatible with all 1.75mm PLA ABS 3D printer, works with Anet A...
  • .2mm Boquilla para Micro Swiss MK10 Kit de actualización de
    Precio:  $5,869.00

    .2mm Boquilla para Micro Swiss MK10 Kit de actualización de

    -Titulo Original : .2mm Nozzle for Micro Swiss MK10 All Metal Hotend Upgrade Kit-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for Micro Swiss MK10 All Metal Hotend Kit // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Upgrade for MK10 Exturders // Orifice size: .2mm // Made in USA by Micro Swiss // This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our MK10 All Metal Hotend Kit. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Micro Swiss MK10 Chapado resistente al desgaste Boquilla par
    Precio:  $5,869.00

    Micro Swiss MK10 Chapado resistente al desgaste Boquilla par

    -Titulo Original : Micro Swiss MK10 Plated Wear Resistant Nozzle for PTFE Lined Hotend M7 Threads 1.75 mm, 0.4mm (Flash Forge/Dremel/Wanhao)-Fabricante : MICRO-SWISS-Descripcion Original: USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials. // Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance. // Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure. // Color: Easy upgrade for trouble-free printing of hard composites! Our Plated Brass Wear Resistant Nozzles are made from brass for good thermal conductivity and plated with an extremely hard high lubricity coating. The coating increases the life of the nozzle significantly. We have yet to wear out a nozzle! With normal brass nozzles noticeable wear can occur after as little as 500g of Stainless Steel material. Currently available in: 1. MK8 Style (M6 Threads compatible with most Makerbot style machines including the Replicator 1, 2, 2x, 5th gen, Mini & Z18) in 0. 4mm & 0. 6mm diameter orifices - 1. 75mm filament only. 2. MK10 Style (M7 Threads for newer Flash-Forge, Dremel & Wanhao) in 0. 4mm & 0. 6mm diameter orifices - 1. 75mm filament only. 3. Modified MK8 RepRap Style (M6 Threads compatible with E3D (including BigBox), Hexagon (newer Lulzbot & Robo3D) & Ultimakers upgraded with an Olsson block) for 1. 75mm & 2. 85mm filament diameter in 0. 4mm, 0. 6mm & 0. 8mm diameter orifices. 4. Printrbot Ubis Style (for all Printrbots W/O all metal upgrade) in 0. 4mm & 0. 6mm diameter orifices (ignore 0. 2mm marking. . . long story) - 1. 75mm filament only. 5. Afinia/UP! /Zortrax Style in 0. 4mm & 1. 75mm filament only. Larger diameters require more parameter modification, but have slightly more consistent extrusion & increased life over 0. 4mm. Custom manufactured for ProtoPlant, makers of Proto-pasta in the USA by Micro Swiss. contact Proto-pasta for more information...
  • 2 Boquillas de impresora 3D CR-10S PRO V2 M6x0.75mm (0.4mm)
    Precio:  $3,289.00

    2 Boquillas de impresora 3D CR-10S PRO V2 M6x0.75mm (0.4mm)

    -Titulo Original : 2pcs CR-10S PRO V2 Upgrade 3D Printer Plated Wear Resistant Nozzle M6x0.75mm Threads Brass Nozzle 0.4mm Only For Creality CR-10S Pro And CR-10 MAX Original Hotend 3D Printer-Fabricante : POLISI3D-Descripcion Original: Tamaño de la boquilla: 0,4 mm, M6x0,75 mm Rosca de paso para uso de filamento de 1,75 mm El material de la boquilla es latón para mantener una buena conductividad térmica, el revestimiento de níquel puede aumentar la vida útil de la boquilla y evitar la oxidación de la superficie de la boquilla. El niquelado tiene una alta dureza y resistencia al desgaste, aplicar niquelado en la superficie de la boquilla puede reducir la fricción, para que sea más suave al introducir el filamento Se calienta: solo se utiliza para la impresora 3D de hotend original Creality CR-10S Pro / CR-10S PRO V2 / / CR-10 MAX Paquete: 2 boquillas de 0,4 mm. ...
  • Set Bloque Termico Barral Y Boquilla Para Mk8 Impresora 3d
    Precio:  $4,609.00

    Set Bloque Termico Barral Y Boquilla Para Mk8 Impresora 3d

    -Titulo Original : Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap-Fabricante : Onyehn-Descripcion Original: Paquete de 5 x Impresora 3D Extrusora Hotend 30 mm de longitud 1.75 mm Tubo de entrada de boquilla (para impresora 3D MK8 Makerbot Reprap Prusa I3) y 5 x Impresora 3D 0.4 mm Extrusora Cabezal de impresión de boquilla de latón. Regalo 5pcs tuercas M6 y 2 llaves hexagonales Cabezal de impresión de boquilla de latón de extrusora de 0,4 mm: color dorado; Material - cobre (latón); Tamaño - 5 * 13 mm; Diámetro de entrada: 1.75 mm; Diámetro de salida: 0.4 mm. Boquilla de garganta: Hilo externo - M6; Diámetro interno - 2 mm; Longitud - 30 mm; Diámetro del filamento - 1.75 mm; Material: Acero inoxidable. Compatibilidad: compatible con todas las impresoras 3D PLA ABS de 1.75 mm Cantidad: 22pcs / lot (5x tubo de garganta de la boquilla de la impresora 3D 5x cabezales de impresión de la boquilla 5x bloques del calentador Hotend 5x tuercas M6 2x llaves hexagonales (para la impresora 3D MK8 Makerbot Reprap Prusa I3)) Product features: Type: Nozzle Throat Compatibility: 3D Printer Outer Thread: M6 Nozzle Throat Outer Diameter: 7mm Nozzle Throat Inner Diameter: 4mm Teflon Pipe Inner Diameter: 2mm Length: 30mm Filament Diameter: 1.75mm Material - Stainless Steel Specification of Brass Nozzle: Type: 0.4mm Extruder Brass Nozzle Print Head Color: Golden Material: copper (brass) Size: 5*13mm Input Diameter: 1.75mm Output Diameter: 0.4mm Specification of Heater Blocks Hotend: Name:Metal Part Color:Silver Specification:20*20*10mm Specification of Hex Key Wrench: Quantity: 2 Pack Diameter: 1.5mm and 2mm Shape: hex Package Including: 5 x 3D Printer heating block 5 x 3D Printer 30mm length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) 5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head 5 x M6 nuts 2 x Hex Key Wrenches Only the above package content, other products are not include...
  • 14 Sets Printer 3d Boquilla Kit De Herramientas De Limpieza
    Precio:  $4,409.00

    14 Sets Printer 3d Boquilla Kit De Herramientas De Limpieza

    -Titulo Original : 14 Sets 3D Printer Nozzle Cleaning & Removal Tools Kit, SourceTon 2 PCS Palette Knife, 10 PCS Needles (5X 0.4mm, 5X 0.3mm) and 2 PCS Tweezers Tools Kit-Fabricante : SOURCETON-Descripcion Original: VARIOUS SIZE - 10 pieces cleaning needles in 2 different size 0.3 mm, 0.4 mm, suitable for cleaning most of your 3D Printer nozzles. // PREMIUM QUALITY- Both needles and tweezers are made of high quality stainless steel, flexible, sturdy and durable. The palette knife have a plastic handle and a sharp & hardened blade. // STYLISH AND USEFUL- The spatulas have a brown ergonomic plastic comfort grip, one of them has a short beveled front edge, another one has a flat long front edge. // WIDE COMPATIBLE- Compatible with most of 3D printers extruder nozzles, such as E3D Makerbot, MK8 Makerbot RepRap and so on. // VALUE PACKAGE- The package includes: 2 x Palette Knife, 10 x Needles (5x 0.4mm, 5x 0.3mm) and 2 x Tweezers. //...
  • Boquilla de impresora Ender3 Ender 3 Pro 3D 12 piezas
    Precio:  $4,739.00
    Expira: 19/08/2021

    Boquilla de impresora Ender3 Ender 3 Pro 3D 12 piezas

    -Titulo Original : 12 pcs Creality 3D CR-10/CR-10/Ender3 Ender 3 Pro 3D Printer Nozzle with 0.2/0.3/0.4/0.5/0.6/0.8 Each Size 2 pcs for 1.75mm DIY 3D Printer Mendel 3D Printer use-Fabricante : Creality 3D -Descripcion Original: 6 tamaños y cada tamaño 2 piezas Para las series CR10, CR-10S4, CR-10S5 y Ender No se puede para CR-10S Pro y CR-...
Mostrar del 1 al 24 (de 154 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]