Arriba

Impresión > Impresión 3D > Picos Nozzle

Mostrar: 
Mostrar del 1 al 24 (de 155 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Kweiny Mk10 Hotend Kit Para Printer 3d M7 Bronce Boquilla Y
    Precio:  $6,839.00

    Kweiny Mk10 Hotend Kit Para Printer 3d M7 Bronce Boquilla Y

    -Titulo Original : Kweiny MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor-Fabricante : KWEINY-Descripcion Original: Compatibility: Fit with MK10 Dia 8mm aluminum cooling block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc. // Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle; // Improved Version: According to customer feedback, a M3 threaded hole has been added to the aluminum block, making it suitable for both M3 and M4 thermistor; // Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece. For detailed dimensions, please refer to the drawings in the upper left; // Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy. // Size: MK10 hotend M7 thread aluminum heater block; 0.4mm; 1.75mm; M7; Brass. MK10 hotend M7 thread aluminum heater block, MK10 aluminum cooling block; 1.75mm; lower thread M7, upper diameter φ7.8mm; 26mm; Stainless steel with 2mmX4mm PTFE tube. MK10 M7 nozzle, MK10 M7 throat, φ6mm cartridge heater, M3 or M4 thermocouples; 20mm*20mm*13mm; Aluminium alloy. 1 piece; 1 piece; 1 piece; 1 piece...
  • Boquilla Micro Swiss resistente al desgaste Boquilla para MK
    Precio:  $6,449.00

    Boquilla Micro Swiss resistente al desgaste Boquilla para MK

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for MK10 PTFE Lined Hotend .2mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice Maker Select 3D Printer v2, Cocoon Create 3D Printer // For PTFE lined hotend // Plated with TwinClad XT Coating // Orifice size: .2mm // Made in USA by Micro Swiss // This is MK10 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Luter 20 Un. Printer 3d Boquilla 0.4mm Mk8 Boquilla Extrusor
    Precio:  $3,849.00

    Luter 20 Un. Printer 3d Boquilla 0.4mm Mk8 Boquilla Extrusor

    -Titulo Original : LUTER 20PCS 0.4mm 3D Printer Nozzles MK8 Extruder Nozzles + 5 PCS Stainless Steel Nozzle Cleaning Needles for Makerbot Creality CR-10-Fabricante : LUTER-Descripcion Original: Prime Quality--The 3D printer nozzles are made of high quality brass, the nozzle cleaning needles are made of premium stainless steel. Heavy duty and provide a long service life. // Precise Design--The 0.4mm extruder nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer. // Excellent Cleaning Needles--The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs. // Useful Combination--The needles are designed for 0.4mm 3D printer nozzles including such as Makerbot Creality, CR-10, Ender 2, Ender 3, etc. The needles are also suitable for everything used as a nozzle. // Package Include--20 x 0.4mm 3D printer nozzles, 5 x nozzle cleaning needles, 1 x transparent storage box // Keep your 3d printer nozzles clean! No more annoying extruder nozzle clogs! A must have for every 3D printer hobbyist Suitable for everything used as a nozzle, such as Air Brush, Water Sprinkler Nozzle, Garden Hose, Shower Head, dishwasher nozzles and so on Nozzle Parameter: Input diameter 1.75mm, output diameter 0.4mm, screw thread:M6, hexagon diameter:6mm Color:Golden Nozzle+Silver Needles Product Weight:70g Package Weight:184g Package Size:12.5cm*8.5cm*1.9cm 20 x 0.4mm 3D printer nozzles 5 x nozzle cleaning needles 1 x transparent storage box Please keep away from children. Cleaning the nozzles untill the nozzle is heated over 200 degrees....
  • Boquillas Para Impresora 3D MK8 (30 Unidades) 0.2mm A 1.0mm
    Precio:  $6,579.00

    Boquillas Para Impresora 3D MK8 (30 Unidades) 0.2mm A 1.0mm

    -Titulo Original : 3D Printer Nozzles, 30PCS Hardened Steel And Brass MK8 Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm With Cleaning Tool Kit For CR-10/ Ender 3/5 , Ender 3/ V2 Ender3 Pro,Prusa I3-Fabricante : Kingroon-Descripcion Original: - Bricolaje como quieras: recibirás 2 piezas de moldes de resina de cartas de tarot y 22 piezas de cuentas de diamantes para la fabricación de joyas, se pueden aplicar ampliamente a diversas artesanías y proyectos de fabricación de joyas, adecuadas para hacer colgantes, dijes, collares, pendientes, adornos colgantes, accesorios para el cabello, etc., estos moldes de silicona para resina epoxi también son aptos para hacer tarots, brindan mucha diversión a su tiempo libre - Servirle durante mucho tiempo: estos moldes de tarjetas arcana principales están hechos de silicona de calidad, suave al tacto, con mano de obra exquisita, los patrones están tallados de manera clara y vívida, no son fáciles de usar o rasgar, estos moldes para resina pueden servirle para durante mucho tiempo, flexible y lavable, la superficie y el borde son lisos, sin rebabas, lo que le brinda una experiencia de uso cómoda - 22 patrones para elegir: el molde de resina de la carta del tarot está diseñado con 22 patrones diferentes, lo que le brinda múltiples opciones, y puede elegir el patrón de acuerdo con sus preferencias o demandas reales, el pequeño molde de resina presenta diversos elementos, que contienen estrellas, luna , sol, magos, reinas, demonios y más, satisfacen sus diversas necesidades - Mejore la capacidad práctica: este molde de silicona para resina epoxi es apropiado en tamaño y liviano, adecuado tanto para principiantes como para amantes del bricolaje, y nuestra cantidad suficiente de moldes de resina para juegos pueden ayudarlo a invitar a sus amigos o familiares. para unirse a sus proyectos de bricolaje, en los que puede practicar su habilidad práctica, inspirar su imaginación y creatividad, desarrollar la relación entre ustedes...
  • Tubo teflon impresora 3D 3mm interno x 4mm externo (2m)
    Precio:  $3,429.00

    Tubo teflon impresora 3D 3mm interno x 4mm externo (2m)

    -Titulo Original : RuiLing 1 Piece PTFE Tube 3D Printer Supplies & Accessories for Long Distance Nozzle Feed Tube J-Head Hotend Extruder Feeding Tube ID 3mm OD 4mm Length 2m -Fabricante : RuiLing -Descripcion Original: MOLESKINE ART COLLECTION: From sketchbooks and sketchpads to watercolor notebooks with heavy paper, to music notebooks with plain and pentagram pages, to storyboard layout notebooks, Moleskine's art collection of notebooks offer the quality you need. // DURABLE COVER & ELASTIC CLOSURE: Hold writing projects & notes in your Moleskine notebook with an elastic closure band & inner storage folders. Leather-like classic Moleskine cover & thick, ivory paper pages are perfect for writing with fountain pens. // GIFT QUALITY NOTEBOOKS: Moleskine planners, journals and notebooks come in hardcover or softcover and colors like black, red, blue, green and brown. The binding and cover have a durable finish, designed for daily journaling, writing and sketching. // DELUXE QUALITY PAGES: Moleskine's thick, ivory paper pages in a hardcover Moleskine notebook, softcover Moleskine notebook, cahier or volant journal, or Moleskine planner are perfectly textured for writing with a ballpoint pen, fountain pen, or pencil. // MOLESKINE IS LOVED FOR A REASON: Writers, students, artists, professionals & travelers love Moleskine notebooks & planners. From lined to unlined, dotted to graph paper there's a Moleskine notebook for your needs. Try one & you'll understand the passion. // Size:  |  Color: Product Description The Moleskine Art Plus Large Sketchbook is made with top quality heavy paper and is perfect for on the go drawings, sketches and tempera colors. Every Moleskine product is thread bound and has a cardboard cover with rounded corners, acid free paper, a bookmark, an elastic closure and an expandable inner pocket that contains the Moleskine history. Specifications: - Layout: Plain Paper - Dimensions: 5 x 8-1/4 - Hard Cover with elastic closure and bookmark ribbon. - Color: Black - Pages: 104 - Internal Accordion Pocket - Paper Weight: 165 gsm/111 lb.; FSC Certified Paper; Acid-Free (pH Neutral) From the Manufacturer Art Collection sketchbooks and albums are inviting blank spaces to fill with sketches and drawings. Portable comfort zone: be creative on the move, wherever you go. Keep your artwork private or share with the world. A range of professional artistic tools to capture the imagination and enable creativity - Hard Cover Notebook - Rounded corners - Elastic closure - Moleskine ivory paper - Matching ribbon bookmark - Paper: 120 gsm, acid-free, ivory, plain - “Incase of Loss” printed on the flyleaf - Expandable inner pocket in the back - Reusable paperband B-SIDE featuring additional printed tools - Lies flat, opens at 180° - The history of Moleskine is inside - Moleskine Srlcreates and sells FSC-certified product...
  • Sindoh RDP14100 AS 3Dwox Dp200 / 1 Boquilla (Dp200 y 3Dwox 1
    Precio:  $54,749.00

    Sindoh RDP14100 AS 3Dwox Dp200 / 1 Boquilla (Dp200 y 3Dwox 1

    -Titulo Original : Sindoh RDP14100-AS 3Dwox Dp200/1 Nozzle (Dp200 and 3Dwox 1 Only)-Fabricante : SINDOH-Descripcion Original: Sindoh // Nozzle // 3Dwox Dp200 3D printer // 3Dwox Dp200/1 nozzle (Dp200 and 3Dwox 1 only). 3Dwox Dp200/1 nozzle helps users build better models with rigid materials such as PLA and ABS...
  • 14 un. Printer 3D M6 Boquilla Extrusora 0.4mm Bronce Boquill
    Precio:  $3,459.00

    14 un. Printer 3D M6 Boquilla Extrusora 0.4mm Bronce Boquill

    -Titulo Original : 14 Pcs M6 3D Printer Nozzle 0.4mm Extruder Brass Nozzle Print Head-Fabricante : KULANNDER-Descripcion Original: Good Design: The hole of 3D print nozzle is consistent size and machining, the threads is clean and well formed. The size is clear stamped on the nozzles. // Compatibility: Compatible with all 1.75mm ABS/ PLA 3D printer, work well with Monoprice select mini, V5 V6, Prusa i3, Anet8, Anycubic i3 mega, etc. // Replacement Nozzle: The 0.4mm M6 3D printer nozzle is a good back up or emergenices when the stock nozzle clog, our brass nozzles produce consistent printing and no clog, give you a smooth and clean printing. // Brass Material: The extruder brass nozzle print head is made of durable and solid brass material, not easy get rust or erosion, provide long serivice life. // Quantity: Package include 14pcs nozzle print head, out diameter: 0.4mm. // Step 1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280). Step 2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out. Step 3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight. Type: Extruder Brass Nozzle Print Head Material: Brass Compatibility: Compatible with all 1.75mm ABS/ PLA 3D printer, work well with Monoprice select mini,Prusa i3, Anet8, Anycubic i3 mega, etc. Installation: external M6 thread connection Out Thread: M6 Filament Diameter: 1.75mm Output Diameter:0.4mm Small parts, please keep away from children. 14 x 0.4mm nozzle print hea...
  • Kits de impresora versión Bowden de 24 V para Ender 3 3 pro
    Precio:  $6,529.00

    Kits de impresora versión Bowden de 24 V para Ender 3 3 pro

    -Titulo Original : MEEPOCAN 3D Printer E3D V6 Hotend Kit (24V Bowden Version) With Fan For 1.75mm PLA/ABS Filament Creality Ender 3/3 Pro, Anycubic Mega I3, Anet A8 And Prusa I3 DIY Printer Kits-Fabricante : MEEPOCAN-Descripcion Original: Viene con una boquilla de acero inoxidable de 0,4 mm preinstalada y 3 boquillas de latón adicionales (1x0,3 mm, 1x0,4 mm y 1x0,5 mm) más 1 garganta de bloque de calor más Resistente al calor y ventilación: calentador NTC de 24 V / 40 W 80 cm de longitud, evita que el NTC se queme y se rompa con frecuencia, garganta de la boquilla de material de acero inoxidable 304 y resistencia de alta calidad cuya temperatura puede alcanzar los 280 ° C, ventilador de alta velocidad de 24 V, que irradia rápidamente Diseño antifugas y antibloqueo: la boquilla del extrusor se conecta con el tubo sin costuras, evita que el material de impresión se filtre o se bloquee Aplicabilidad y compatibilidad: compatible con todas las impresoras 3D E3D V6 Makerbot de 1,75 mm; Conector NTC con terminal, fácil de instalar El paquete incluye: kit completo de extrusora de metal V6 hotend 24v / 40w / 1.75mm / 0.4mm (cabezal de impresión V6 + ventilador + cubierta del ventilador + tubo de PTFE + accesorio de tubo), 3 boquillas de extrusora de latón adicionales (1x0.3mm, 1x0.4mm , 1x0.5 mm) y una garganta más con bloque de calo...
  • Kit De Limpieza + 10 Boquillas 0.4mm Mk8 Para Hellbot Magna
    Precio:  $2,939.00
    Expira: 25/12/2021

    Kit De Limpieza + 10 Boquillas 0.4mm Mk8 Para Hellbot Magna

    -Titulo Original : 21 Pieces 3D Printer Nozzle and Cleaning Kit, 10 Pack 0.4 mm MK8 Nozzles, 10 Pack 0.4 mm Needles and 1 Pack Tweezers Tool kit, Stainless Steel Nozzle Cleaning Tool Kit-Fabricante : Leinuosen-Descripcion Original: Boquilla y kit de limpieza: el paquete incluye 10 piezas de agujas de limpieza de boquillas de 0,4 mm embaladas en un recipiente seguro, pinzas puntiagudas de 1 pieza y 10 piezas de boquillas MK8 de 0,4 mm Boquillas MK8 de 10 piezas: el diámetro de entrada de la boquilla de la impresora 3D es 1.75 mm, el diámetro de salida es 0.4 mm y el diámetro del hexágono es 6 mm; Compatible con la impresora 3D Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, Hellbot Magna y apto para todas las impresoras 3D PLA ABS 3D de 1.75 mm Pinzas: las pinzas de impresión 3D son buenas para el mantenimiento de las boquillas y la limpieza del exceso de material de soporte; Es una pinza de precisión curva antiestática, no magnética. Agujas: 10 piezas de agujas flexibles de acero inoxidable de 0,4 mm de diámetro que son buenas para el mantenimiento suave de sus boquillas y lugares difíciles de alcanzar como los engranajes de alimentación Características: la boquilla de la impresora 3D y el kit de limpieza es un kit duradero para varios propósitos; Elimine el exceso de plástico y atascos transparentes con alta precisión, también es bueno para el mantenimiento general de la sección del disipador de calor...
  • PrimaCreator PC NSP 04Hx1 MK10 MK10 Boquilla de acero endure
    Precio:  $5,449.00

    PrimaCreator PC NSP 04Hx1 MK10 MK10 Boquilla de acero endure

    -Titulo Original : PrimaCreator PC-NSP-04Hx1-MK10 MK10 Hardened Steel Nozzle 0,4 mm-Fabricante : PRIMACREATOR-Descripcion Original: Premium high-quality nozzle for perfect prints “ not to be compared with cheap Chinese nozzles made of low end material in old worn machinery. We only use the best // Manufactured with extreme precession tolerance of only 0.01 mm. Quality is controlled in every step of production to ensure a 100 percent perfect nozzle. Each nozzle is cleaned in ultrasonic bath // Hardened steel nozzle perfect for demanding and abrasive filaments like carbon, metal and glow in the dark. With a hardened steel nozzle, you don´t have to worry about your nozzle wearing out // Mk10 style nozzle with M7 thread for 1.75Mm filaments fits printers like wanhao I3, I3 plus, D4, D6, qiditech, flash forge dreamer, creator, finder, monoprice maker select, cocoon create, etc.¦ // What you get: 1 x 0.40Mm - Mk10 hardened steel nozzle // Fits to: Wanhao I3, D4, D6, qidi tech, Flash Forge dreamer, creator, Finder, monoprice Maker Select, cocoon create, qidi tech the premium nozzles from PrimaCreator are a Series of replacement nozzles that can make more difference for the result than you may Think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. All nozzles from PrimaCreator are made from the best high-quality Brass or steel (depending on Type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints. For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it's time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don't get the same results. After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation. The nozzle will now take shape with millimeter precision, the tolerance is less than 0.01 mm. The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. The nozzles are then checked for one last time and packed individually in a protective box “ ready to be shipped to you...
  • CCTREE 10 un. MK8 Boquilla Extrusora para Printer 3D Makerbo
    Precio:  $3,459.00

    CCTREE 10 un. MK8 Boquilla Extrusora para Printer 3D Makerbo

    -Titulo Original : CCTREE 10pcs MK8 Extruder Nozzle for 3D Printer Makerbot Creality CR-10 Ender 3 5 Different Size 0.2mm, 0.4mm.0.6mm.0.8mm,1.0mm-Fabricante : CCTREE-Descripcion Original: Input Diameter :1.75mm // Output Diameter: 0.2mm,0.4mm,0.4mm.0.6mm.0.8mm,1.0mm // Material: Copper (Brass) // 10Pcs Extruder Brass Nozzle // 5 different size (each size 2pcs) // Specification:13mm*6mm Material: Brass of National standard Weight:2g Nozzle Precision:0.2mm/0.4mm/0.6mm/0.8mm/1.0mm Hexagon Diameter:6mm Screw Thread :M6 Input Diameter: 1.75mm Package Included: 10x nozzles Size:0.2mm,0.4mm,0.6mm,0.8mm,1.0mm Each size 2pc...
  • Anet Termistor de 5 piezas, Termistor NTC 3950 de 100 K ohmi
    Precio:  $2,769.00
    Expira: 25/07/2021

    Anet Termistor de 5 piezas, Termistor NTC 3950 de 100 K ohmi

    -Titulo Original : Anet 5pcs Thermistor, NTC 3950 100K ohm Thermistor for RepRap 3D Printer Heatbed or Hot End 3D Printer Kit Accessories - White (5PCS)-Fabricante : ANET-Descripcion Original: The thermistor use for RepRap 3D printers. // Working Temperature Range: -40°C~+300°C. // Resistance: at 25°C=100K ohm // Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring. // Use it with heated bed or extruder. // Features: NTC pre-wired thermistor for most 3D printers heat bed & extruder. 100K ohm temperature sensor. 3P terminal for connecting. With 1m long high temperature insulated wire. Durable material for long life. Specifications: Suitable for: Anet A2/ A3/ A6/ A8 3D Printer. Material: High Temperature Teflon(200°C) Resistance: at 25°C=100K ohm Cable Length: Approx. 1m Working Temperature Range: -40°C~+300°C Package List: 5* Thermistor Note: The item only includes the thermistor...
  • Boquilla E3D Bronce V6 genuina 3.00 mm x 0.40 mm (BOQUILLA V
    Precio:  $4,839.00
    Expira: 04/02/2021

    Boquilla E3D Bronce V6 genuina 3.00 mm x 0.40 mm (BOQUILLA V

    -Titulo Original : Genuine E3D Brass V6 Nozzle - 3.00mm x 0.40mm (V6-NOZZLE-300-400)-Fabricante : E3D-Descripcion Original: Upgrade nozzle for Robo R1/R1 +PLUS, Robo C2, Robo R2 // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .5mm // Made in USA by Micro Swiss // This is Micro Swiss nozzle for Robo 3D Printers, M6 thread, 1.75mm Filament, Hexagon style hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Impresora 3d M7 Rosca Mk10 Boquilla Para 1.75mm Filamento .2
    Precio:  $7,639.00

    Impresora 3d M7 Rosca Mk10 Boquilla Para 1.75mm Filamento .2

    -Titulo Original : 3D Printer M7 Thread MK10 Nozzles for 1.75MM Filament .2mm .3mm .4mm .5mm .8mm 1.0mm (1 Each) Wanhao Dupicator D4/I3 Makerbot 2-Fabricante : DAEWON INDUSTRIES-Descripcion Original: Quality Brass Nozzles // Wide array of sizes // M7 thread MK10 printer nozzles .2mm .3mm .4mm .5mm .8mm 1.0mm // Wanhao Dupicator D4/I3/Dremel nozzles // Makerbot 2 nozzles // Includes: Material: Brass Filament inlet: 1.75mm Fit for: Wanhao Dupicator D4/I3 and various Makerbot 3D Printers FlashForge Creator Pro FlashForge Creator X FlashForge Dreamer Dremel Idea Builder​ PowerSpec 3D Pro​ Wanhao Duplicator 4S Wanhao Duplicator 4X Wanhao i3 Monoprice Maker Select 3D Printer v2 Cocoon Create 3D Printer...
  • YOTINO 10 un. Bloque de calentamiento grueso de 3 mm Algodón
    Precio:  $3,849.00

    YOTINO 10 un. Bloque de calentamiento grueso de 3 mm Algodón

    -Titulo Original : YOTINO 10Pcs 3mm Thick Heating Block Cotton 0.24in x 108ft Polyimide Adhesive Kapton Tape for Makerbot 3D Printer Hotend Nozzle-Fabricante : YOTINO-Descripcion Original: - 3mm heat insulation cotton used for 3D printer nozzle heat preservation, keeping the printer heating evenly and work better, improving the quality of the printed matter, save electricity // - Cotton made from ceramic fiber and high temperature film, adhesive tape made from Polyimide // - Heating block cotton and Kapton tape are used on megathermal hotend nozzle, short term resistance to temperature 300 degrees Celsius (572 Fahrenheit ), long term resistance to temperature 180 degrees Celsius (356 Fahrenheit ) // - Cutting the cotton into the proper size and holes as needed, and then use Polyimide tape to firmly stick together // - Heating insulation cotton fits for all 3D printer extruder heater block offered from MK7 MK8 Makerbot RepRap , etc. // Color: Material: cotton and Polyimide Heat insulation cotton: Length 70mm/2.76in, width 20mm/0.79in, thickness 3mm/0.12in Polyimide high temp tape: Total length 30M/108ft, width 6mm/0.24in Feature: heat preservation 10PCS x heating block cotton 1 PCS x Kapton Tape 1. Small parts, keep away from children 2.After replacing the nozzle, recalibrate the distance between the print head and the print plate to ensure the quality of the printed parts 3. The surface temperature of the 3D printer may be very high, being careful not to touch the heating element to prevent injury 4. Do not run the device unattended when the 3D printer is initially runnin...
  • Boquilla para UP resistente al desgaste con recubrimiento Mi
    Precio:  $6,149.00

    Boquilla para UP resistente al desgaste con recubrimiento Mi

    -Titulo Original : Micro Swiss Plated Wear Resistant nozzle for UP Box+ / UP300 / Cetus Extruder / Afinia H800+, H800 & H480-02 (.4mm)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: UP Box+ / UP300 / Cetus Extruder / Afinia H800+, H800 & H480-02 // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Orifice size: .4mm // Made in USA by Micro Swiss // This nozzle will fit UP Plus, UP Mini and the Up Box manufactured after March 2015. Nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle. **** Please note that this nozzle may not fit on older models of the Mini and Plus 2. **...
  • Aokin 22 un. Boquilla Printer 3D MK8 Boquilla Extrusora 0.2m
    Precio:  $2,929.00

    Aokin 22 un. Boquilla Printer 3D MK8 Boquilla Extrusora 0.2m

    -Titulo Original : Aokin 22 Pieces 3D Printer Nozzles, MK8 Extruder Nozzle 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Brass Extruder Print Head for 3D Printer Anet A8 Makerbot MK8 Creality CR-10 Ender 3-Fabricante : AOKIN-Descripcion Original: Compatibility: The printer nozzles fit for Creality CR-10, MK8 Makerbot Reprap Prusa I3, Tevo Tarantula, Anet A8, Ender 3 3D Printer etc. // Package include: totally 22 pcs MK8 extruder nozzle, 7 sizes: 2 x 0.2mm, 2 x 0.3mm, 10 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm. // Size: the 3D printer nozzles, Out Thread: M6, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm. // Material: the 3D printer nozzles are made of premium brass, sturdy and high temperature resistance, smooth silk, connect with M6 out thread, easy to use. // Aokin 3D printer nozzles use high quality raw materials and fine workmanship, if you have any question for our product, please feel free to contact us, we will do our best for you. // 2x 0.2mm 3D printer nozzles 2x 0.3mm 3D printer nozzles 10x 0.4mm 3D printer nozzles 2x 0.5mm 3D printer nozzles 2x 0.6mm 3D printer nozzles 2x 0.8mm 3D printer nozzles 2x 1.0mm 3D printer nozzles Material: Brass Out Thread: M6 Filament Diameter: 1.75mm Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Compatibility: Creality CR-10, MK8 Makerbot Reprap Prusa I3, Tevo Tarantula, Anet A8, Ender 3 3D Printer etc. 1、After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts. 2、Small accessories, please keep away from children...
  • 3 Protectores Termicos de Silicona para Hotend MK8 Creality
    Precio:  $3,279.00
    Expira: 20/05/2021

    3 Protectores Termicos de Silicona para Hotend MK8 Creality

    -Titulo Original : Aokin 3D Printer Heater Block Silicone Cover MK7 MK8 MK9 Hotend for Creality CR-10,10S, S4, S5, Ender 3, Anet A8, 3 Pcs, Black-Fabricante : Aokin-Descripcion Original: Embalaje: cubierta de silicona de 3 piezas para bloque calefactor Makerbot MK7, MK8, MK9. Compatibilidad: apto para Creality CR-10 / CR-10S S4 S5 / CR-10 mini / Ender-2 / Ender-3 / Anet A8 etc. MK7, MK8, MK9 hotend. Material: el calcetín de silicona MK8 hecho de material de silicona antiadherente resistente al calor, resistencia a altas temperaturas: 280 ℃. Función: la cubierta de silicona mantendrá limpio el bloque del calentador y repele el plástico quemado, ennegrecido y acumulado, de modo que pueda extender la vida útil del bloque del calentador y la extrusora; y ayuda a mantener estable la temperatura del hotel...
  • Kit de actualización de Boote para Micro Swiss MK10 de .8 mm
    Precio:  $6,449.00

    Kit de actualización de Boote para Micro Swiss MK10 de .8 mm

    -Titulo Original : .8mm Nozzle for Micro Swiss MK10 All Metal Hotend Upgrade Kit-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for Micro Swiss MK10 All Metal Hotend Kit // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Upgrade for MK10 Exturders // Orifice size: .8mm // Made in USA by Micro Swiss // This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our MK10 All Metal Hotend Kit. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla Micro Swiss Plated para LulzBot TAZ 5 LulzBot Mini
    Precio:  $6,149.00

    Boquilla Micro Swiss Plated para LulzBot TAZ 5 LulzBot Mini

    -Titulo Original : Micro Swiss Plated Nozzle for LulzBot TAZ 5, LulzBot Mini, Hexagon Hotend Style .5mm-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for LulzBot TAZ 5, LulzBot Mini, Hexagon hotend // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Upgrade // Orifice size: .5mm // Made in USA by Micro Swiss // Micro Swiss plated nozzle for LulzBot, M6 thread, 3mm Filament, Hexagon hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • 3d Printer Nozzles 20pcs Stainless Steel Mk8 Extruder Nozzle
    Precio:  $4,069.00
    Expira: 20/11/2021

    3d Printer Nozzles 20pcs Stainless Steel Mk8 Extruder Nozzle

    -Titulo Original : 3D Printer Nozzles 20PCS Stainless Steel MK8 Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm With Storage Box Spanner For 3D Printer Makerbot Creality CR-10-Fabricante : Kingroon-Descripcion Original: - Reemplazo QUETTERLEE Nuevo CPU + GPU Ventilador de refrigeración para Acer Nitro 5 Gaming Laptop AN515-55-59KS AN515-54-5812 AN515-54-728C Serie DFS531005PL0T FL78 DFS561405PL0T FL1K DC5V 0.5A Ventilador QUETTERLEE Reemplazo Nuevo CPU + GPU Ventilador de refrigeración para Acer Nitro 5 Gaming Laptop AN515-55-59KS AN515-54-5812 AN515-54-728C Serie DFS531005PL0T FL78 DFS561405PL0T FL1K DC5V 0.5A Ventilado...
  • 5 Boquillas 0.8mm M7 Mk10 1.75mm Para Impresora 3d
    Precio:  $4,369.00

    5 Boquillas 0.8mm M7 Mk10 1.75mm Para Impresora 3d

    -Titulo Original : uxcell 0.8mm 3D Printer Nozzle Head M7 Thread Replacement for MK10 1.75mm Extruder Print, Brass 5pcs-Fabricante : uxcel...
  • Impresora 3D Boquilla Kit de limpieza Kit para impresión 3D
    Precio:  $10,859.00

    Impresora 3D Boquilla Kit de limpieza Kit para impresión 3D

    -Titulo Original : 3D Printer Nozzle Cleaning Tool Kit for 3D Printing at Home 0.4mm Flexible Needles, Palette Knife, Deburr Tool, Tweezers, File, Storage Bag (15 Piece Set)-Fabricante : DOG RIVER TOOLS-Descripcion Original: BEST 3D PRINTER STARTER PACK: To get the most out of your 3D printer, you need to be armed with the right tools for the job. This 15 piece set includes the top essentials you will need for print removal, nozzle cleaning, clean up, finishing, maintenance and storage by Dog River Tools // PREMIUM QUALITY: Our 0.4mm flexible cleaning needles are made of a high grade material that are flexible and will bend as you need them too but will not break. The precision curved tweezers are easy to use while plucking oozing filament from the extruder nozzle before it starts printing (which means no more burnt fingers) // GREAT VALUE: 15 Piece kit includes: - 5 pc 0.4mm flexible cleaning needles for nozzle in storage tube – 1 pc premium stainless steel spatula with semi flexible blade and rubberized handle – 1 pc Deburr tool with 2 different tips – 1 pc Precision curved tweezers – 1 pc File with 1 round and 1 flat side – 5 pc PTFE Grease packets – 1 pc Zippered nylon tool storage pouch // COMPATIBLE WITH TOP BRANDS: Compatible with popular brands with a 0.4mm nozzle, CR-10, CR10, Ender 2, Ender 3, Anet A8, Tarantula, Tevo, LulzBot , E3D, MK8, MK10, RepRap, E3D, V6, Volcano, Prusa i3 // TRUSTED BRAND: Dog River Tools focuses on making the most innovative and highest quality 3D printing tools and accessories available. Because we are so confident that you will Love and benefit from using our tools we include a limited lifetime guarantee on all our products // This kit is a collection of some of the most common 3D printing tools, helping your maintain your printer, deal with nozzle jams, remove prints from the build surface and clean up the prints after they are complete. 5 pc - 0.4mm Flexible Cleaning Needles for Nozzle and Storage Tube 1 - Premium Spatula with Semi Flexible Blade and Rubberized Handle 1 - with 2 Different Tips 1 - Precision Curved Tweezers 1 - File with 1 Round and 1 Flat Side 5 pc - PTFE Grease Packets 1 - Zippered Nylon Tool Storage Pouch C with all brands that have a 0.4mm nozzle, CR-10, CR10, Ender 2, Ender 3, Anet A8, Tarantula, Tevo,  , E3D, MK8, MK10, RepRap, E3D, V6, Volcano,...
  • 15 Boquillas Impresora 3d 1mm mk8 y 5 boquillas 0.8mm -CR-10
    Precio:  $3,779.00

    15 Boquillas Impresora 3d 1mm mk8 y 5 boquillas 0.8mm -CR-10

    -Titulo Original : LUTER 15PCS 1mm 3D Printer Nozzles Extruder Nozzles for MK8 + 5 PCS 0.8mm Stainless Steel Nozzle Cleaning Needles for Makerbot Creality CR-10 -Fabricante : LUTER -Descripcion Original: Aurabeam XRT136 Replacement TV Remote Control for Vizio Television (XRT136). Compatible with : D24fF1, D24f-F1, D32fF1, D32f-F1, D43fF1, D43f-F1, D50fF1, D50f-F1, E32D1, E32-D1, E32HD1, E32H-D1, E40D0, E40-D0, E43D2, E43-D2, E43E2, E43-E2, E43UD2, E43U-D2, E48D0, E48-D0, E48UD0, E48U-D0, E49UD1, E49U-D1, E50D1, E50-D1, E50E1, E50-E1, E50E3, E50-E3, E50UD2, E50U-D2, E50XE1, E50X-E1, E55D0, E55-D0, E55E1, E55-E1, E55E2, E55-E2, E55UD0, E55U-D0, E55UD2, E55U-D2, E60E3, E60-E3, E60E-3, E60UD3 E60U-D3, E65D0, E65-D0, E65D1, E65-D1, E65E0, E65-E0, E65E1, E65-E1, E65E3, E65-E3, E65UD1, E65U-D1, E65UD3, E65U-D3, E70D3, E70-D3, E70E3, E70-E3, E70UD3, E70U-D3, E75E1, E75-E1, E75E16, E75-E16, E75E3, E75-E3, E80E3, E80-E3, E80UD3, E80UDE, E80U-DE, M50D1, M50-D1, M50E1, M50-E1, M55D0, M55-D0, M55E0, M55-E0, M60D1, M60-D1, M65D0, M65-D0, M65E0, M65-E0, M70D3, M70-D3, M70E3, M70-E3, M75E1, M75-E1, M80D3, M80-D3, P50C1, P50-C1, P55C1, P55-C1, P55E1, P55-E1, P65C1, P65-C1, P65E1, P65-E1, P75C1 P75-C1, P75E1, P75-E1, P75E1E32D1, P75-E1E32D1, D24FG9, D24F-G9, D24HG9, D24H-G9, D32HF0, D32H-F0, D32HF1, D32H-F1, D32HF4, D32H-F4, D39FF0, D39F-F0, D39FF1, D39F-F1, D40FF1, D40F-F1, D40FG9, D40F-G9, D43F1, D43-F1, D43FF2, D43F-F2, D43FXF4, D43FX-F4, D48FF0, D48F-F0, D50F1, D50-F1, D50F501, D50-F501, D50XG9, D50X-G9, D55F2, D55-F2, D55XG1, D55X-G1, D60F3, D60-F3, D65F1, D65-F1, D65XG4, D65X-G4, D70F3, D70-F3, E43F1, E43-F1, E50F2, E50-F2, E55F0, E55-F0, E55F1, E55-F1, E60F3, E60-F3, E65F0 Batteries not included. ...
Mostrar del 1 al 24 (de 155 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]