Arriba

Impresión > Impresión 3D > Picos Nozzle

Mostrar: 
Mostrar del 1 al 24 (de 235 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Boquilla RepRap M6 resistente al desgaste con revest. 0.2mm
    Precio:  $2,998.00

    Boquilla RepRap M6 resistente al desgaste con revest. 0.2mm

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle RepRap - M6 Thread 1.75mm .2mm (All Printers with a E3D V4 / V5 / V6 1.75 Hotend/Prusa i3 MK2 / MK2S / MK3)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: E3D V5-V6 Hotend with 1.75mm Filament // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .2mm // Made in USA by Micro Swiss // This is RepRap style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • E3d V6 Extra Boquilla 1.75mm x 0.30mm De Alta Resolucion
    Precio:  $3,375.00

    E3d V6 Extra Boquilla 1.75mm x 0.30mm De Alta Resolucion

    -Titulo Original : E3D v6 Extra Nozzle - 1.75mm x 0.30mm High Resolution (V6-NOZZLE-175-300) -Fabricante : E3D -Descripcion Original: 16" (15. 6" Viewable) Display, 200 cd/M2 Brightness, 16: 9 aspect ratio. Max Resolution 1366 x 768, 500: 1 contrast ratio, 8ms response time // Multiple USB monitors can be simultaneously connected to a single laptop to function as a multi-monitor PC or Mac. Simply installing Display Link software on the PC or Mac allows you to easily add multiple USB monitors for external displays without unnecessary extra hardware // Usb-powered (no power cable required) with USB 3. 0 technology. // Foldable flexi-stand for portrait or landscape view in Auto-pivot mode // Ultra slim design for Easy carry on-the-go for business presentations and frequent travelers, and case is included. Refresh rate: 60Hz // Compatible with Windows 10 but with only display Link drivers // Style:  |  Pattern Name: Product Description The I1659FWUX USB powered portable LED backlit monitor is a must-have laptop or desktop accessory. The widescreen monitor receives both power and signal via a single USB 3. 0 cable for plug-and-play connection; it does not require a power cord or VGA cable, and comes with a foldable flexi-stand for maximum flexibility. What's in the Box15. 6 Monitor, USB 3. 0 Cable, Carry Case, QSG Amazon.com AOC e1659Fwu 16-Inch Class USB-Powered Monitor Key Features Slimmer design USB 3.0 connection for high transfer rates and high quality image Brighter panel with brightness control VESA 75mm wall mount compliant Carry case included VESA wall mount compatible. Sleeker Design, Faster Connections The improved USB monitor from AOC is sleeker in design and faster with its USB 3.0 connection. The USB 3.0 achieves high transfer rates with its total of six wires in the data cable, and delivers high quality images. Designed with a piano-black glossy finish, this USB monitor has a 15.6 diagonally viewable image. The e1659Fwu offers a 500:1 contrast ratio, 5ms response time, and a 1366 x 768 resolution at 60Hz. The e1659Fwu USB Monitor has a foldable flexi-stand for viewing in landscape or portrait mode. Landscape mode is ideal for presentations and Excel sheets, while the Portrait mode conveniently gives you an easy vertical view of your instant messaging program, or sidebars such as search results. This monitor has the unique auto-pivot feature that automatically adjusts the image according to the display's orientation, so you will never have to change settings as you switch between landscape and portrait mode. Thinner, Lighter, Portability at its Best It's ultra lightweight and slim for great portability, making it perfect for business presentations, the frequent traveler, photo frame applications, and dual monitor setups on-the-go. The e1659Fwu USB Monitor is the solution for the frequent traveler who needs to pack multiple displays, as it easily fits into a backpack or the carry case that comes with the USB monitor. You gave your feedbacks and we have heard you! The e1659Fwu USB Monitor comes with VESA 75 x 75 mm Mount Compliant feature, allowing you to easily mount the USB monitor to any wall as long as you have the right wall mount arm and bracket. Built-in DisplayLink Technology for Multiple USB Monitors Connection If necessary, multiple USB monitors can be simultaneously connected to a single laptop to function as a multi-monitor PC or Mac, thanks to the built-in DisplayLInk USB graphics. Simply installing DisplayLInk software on the PC or Mac allows you to easily add multiple USB monitors for external displays without unnecessary extra hardware. The e1659Fwu USB Monitor gives you multiple external displays for your laptop without any complications. Tech Specifications Panel: TFT Active Matrix LCD Viewable Image Size: 15.6 Aspect Ratio: 16:9 Brightness: 200 cd/m2 Contrast Ratio: 500:1 Response Time: 8ms Viewable Angle: 90 degrees horizontal, 45 degrees vertical Optimum Resolution: 1366 x 768 @60Hz Colors Supported: 16.7 Million Connectors: USB 3.0 Power Source: USB 3.0 powered Windows 8 Compatible: Yes More Info Download datashee...
  • MK8 Boquilla Extrusoras Boquilla Printer 3D 0.2mm 0.3mm 0.4m
    Precio:  $1,692.00

    MK8 Boquilla Extrusoras Boquilla Printer 3D 0.2mm 0.3mm 0.4m

    -Titulo Original : MK8 Extruder Nozzles 3D Printer Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, Compatible with All 1.75mm PLA ABS 3 22PCS-Fabricante : YINGUO-Descripcion Original: 【3D Printer Extruder Nozzle Kit】 Totally 24 pcs MK8 nozzles in 7 sizes,2 x 0.2mm, 2 x 0.3mm, 10 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm // 【Parameter】Input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; Screw thread: M6;Hexagon diameter: 6 mm // 【Applicability and Compatibility】MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original. // 【Precise Design】3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle. // 【100% Satisfaction Warranty】 If our 3D Printer Nozzle / MK8 Extruder Nozzle do not make you 100% satisfied, please contact us and we will handle for you immediately. // Input Diameter: 1.75 mm Nozzle Precision: 0.2mm/0.3mm/0.4mm/0.5mm/0.6mm/0.8mm/1.0mm Screw Thread: M6 Material: Brass Dimention: 6mm*6mm*13mm 3D printer with MK8 style hotend external M6 thread, such as Creality CR-10, Ender 3, MK8 makerbot, Anet A8, Prusa i3, etc. Step 1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280). Step 2: After heat finished, turn off printer, USE SPANNER to hold heat block, USE SOCKET SCREWDRIVER to screw old nozzle out. Attention not to touch the hot old nozzle by hands. Step 3: Put new nozzle to socket screwdriver, keep spanner holding heat block, screw nozzle in, must be tight and it is done. After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts. 2 x 0.2 mm 3D printer nozzles  2 x 0.3 mm 3D printer nozzles  10 x 0.4 mm 3D printer nozzles  2 x 0.5 mm 3D printer nozzles  2 x 0.6 mm 3D printer nozzles  2 x 0.8 mm 3D printer nozzles  2 x 1.0 mm 3D printer nozzles  1 x Plastic box If there are any questions, please feel free to contact us,   Wellerly Customer Service Team will spare no efforts to assist with you within 24 hours...
  • 12 un. Creality 3D CR 10 / CR 10 / Ender3 Ender 3 Pro Printe
    Precio:  $2,428.00

    12 un. Creality 3D CR 10 / CR 10 / Ender3 Ender 3 Pro Printe

    -Titulo Original : 12 pcs Creality 3D CR-10/CR-10/Ender3 Ender 3 Pro 3D Printer Nozzle with 0.2/0.3/0.4/0.5/0.6/0.8 Each Size 2 pcs for 1.75mm DIY 3D Printer Mendel 3D Printer use-Fabricante : CREALITY 3D-Descripcion Original: 6 size and each size 2 pcs // For CR10,CR-10S4,CR-10S5 series and Ender series // Can not for CR-10S Pro and CR-X // 6 size, 0.2/0.3/0.4/0.5/0.6/0.8mm Each size 2 pcs,total 12 pcs For Creality CR-10 and Ender series 3D printer us...
  • Impresora 3D Leinuosen 24 Pack Boquilla Extrusoras MK8 Boqui
    Precio:  $1,692.00

    Impresora 3D Leinuosen 24 Pack Boquilla Extrusoras MK8 Boqui

    -Titulo Original : Leinuosen 24 Pack 3D Printer Extruder Nozzles MK8 Nozzle 7 Different Size 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm with Clean Box Compatible with Makerbot Creality CR-10-Fabricante : LEINUOSEN-Descripcion Original: 3D Printer nozzle: come with 24 pieces 3D printer MK8 nozzles in 7 different sizes, fit for 3D printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75 mm PLA ABS 3D printer // Parameter: input diameter is 1.75 mm; 24 pieces 7 different sizes of output diameter (quantity x output diameter): 2 x 0.2 mm, 2 x 0.3 mm, 12 x 0.4 mm, 2 x 0.5 mm, 2 x 0.6 mm, 2 x 0.8 mm, 2 x 1.0 mm; Hexagon diameter: 6 mm // Come with storage box: 12 pack common value 0.4 mm nozzles, while 2 pack each ordinary value the sizes of 0.2 mm, 0.3 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm nozzles, totally 24 pieces nozzles save in the clean box, convenient to find and save space // Type: extruder brass nozzle print head; Screw thread: external M6 out thread connection, easy to install // Material: the 3D printer nozzles are made of quality brass material, sturdy and durable; Attention: small accessories, please keep away from children // 24 Pack 3D printer extruder nozzles MK8 nozzle for Makerbot Creality CR-10, 7 different size 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm with clean box 3D printer extruder nozzle: 12 Pack common value 0.4 mm nozzles, while 2 pack each ordinary value the sizes of 0.2 mm, 0.3 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm nozzles, totally 24 pieces nozzles save in the clean box, convenient to find and save space Applicability and compatibility: Fit for 3D printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75 mm PLA ABS 3D printer Specification: Color: gold Material: brass Hexagon diameter: 6 mm Screw thread: M6 Input diameter: 1.75 mm Output diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm Quantity: 24 pieces in total Package contents: 2 x 0.2 mm Nozzle print head 2 x 0.3 mm Nozzle print head 12 x 0.4 mm Nozzle print head 2 x 0.5 mm Nozzle print head 2 x 0.6 mm Nozzle print head 2 x 0.8 mm Nozzle print head 2 x 1.0 mm Nozzle print head 1 x Clean box Warm notes: small parts, please keep away from children...
  • Impresora 3D 10 un. Actualización resistente al desgaste MK8
    Precio:  $1,315.00

    Impresora 3D 10 un. Actualización resistente al desgaste MK8

    -Titulo Original : 3D Printer 10pcs Upgrade Wear Resistant MK8 Extruder Nozzle for Creality Ender 3 Ender5 CR-10 CR-10S S4 S5 Anet A8 5 Different Size 0.2mm, 0.4mm, 0.6mm, 0.8mm,1.0mm-Fabricante : SKOPHY-Descripcion Original: ✔PREMIUM MATERIALS: The 3D printer nozzles are made of high quality brass material, sturdy and durable, brass can be used to print PLA, ABS and most any other non-abrasive materials. // ✔CHARACTERISTICS: MK8 Nozzle through long-term testing to solve the problem of plugging and missing materials to the greatest extent, low thermal conductivity, resistant to corrosion, high abrasion resistance. // ✔PARAMETER: Input diameter 1.75mm, output diameter 0.4mm; out thread: M6. // ✔APPLICABILITY AND COMPATIBILITY: 0.4mm MK8 extruder nozzle fit for 3D printer Makerbot Anet A8, Creality CR-10 CR-10S S4 S5, compatible with all 1.75mm PLA, ABS 3D printer. // ✔100% SATISFACTION GUARANTEE: Our team strives for 100% customer satisfaction with manufacturers provided lifetime guarantee. If there are any problems with our products, contact us and we would be very happy to solve your problems. // Input Diameter :1.75mm Output Diameter: 0.2mm,0.4mm,0.4mm.0.6mm.0.8mm,1.0mm Material: Copper (Brass) 10Pcs Extruder Brass Nozzle 5 different size (each size 2pcs) Small accessories, please keep away from children. After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts. Pliceat are devoted to offer premium quality products to all cherished customers. Meanwhile supply our worry-free 18-month warranty and friendly customer service. If there are any questions, please feel free to contact us, Pliceat Customer Service Team will spare no efforts to assist with you within 24 hours. 10x nozzles Size:0.2mm,0.4mm,0.6mm,0.8mm,1.0mm(Each size 2pcs...
  • Boquilla E3D Bronce V6 genuina 3.00 mm x 0.40 mm (BOQUILLA V
    Precio:  $2,069.00

    Boquilla E3D Bronce V6 genuina 3.00 mm x 0.40 mm (BOQUILLA V

    -Titulo Original : Genuine E3D Brass V6 Nozzle - 3.00mm x 0.40mm (V6-NOZZLE-300-400)-Fabricante : E3D-Descripcion Original: Upgrade nozzle for Robo R1/R1 +PLUS, Robo C2, Robo R2 // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .5mm // Made in USA by Micro Swiss // This is Micro Swiss nozzle for Robo 3D Printers, M6 thread, 1.75mm Filament, Hexagon style hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Mk8 Boquilla Extrusoras Kit Para Printer 3d 5 Un. Bloque Cal
    Precio:  $2,069.00

    Mk8 Boquilla Extrusoras Kit Para Printer 3d 5 Un. Bloque Cal

    -Titulo Original : MK8 Extruder Nozzles Kit for 3D Printer 5 Pcs Aluminum Heater Block +5Pcs 1.75mm Extruder Throat Tube M6 Thread +5Pcs 0.4mm Brass Nozzle +5Pcs Cotton Heater Tape for Makerbot MK7/MK8 Prusa i3 CR-10-Fabricante : UMLIFE-Descripcion Original: ❃❃ Designed for many common types of 3D printers such as Makerbot MK7/MK8, Prusa i3 etc. Solid aluminium construction with aperture. // ❃❃ Offers you an easy way to upgrade your hotend with plenty of MK8 brass extruder nozzles for 1.75mm Filament. // ❃❃ Aluminium Heater Block for Extruders in 3D-Printers. A 6mm drilling with an M3 screw is scheduled for the optimal fixing of the Cartridge Heater. The Thermistor is fixed by means of a M3 grub screw in order to avoid slipping or loosening. The heating block is equipped with an M6 thread for the Nozzle. // ❃❃ This stainless steel barrel has continuous thread so it is more universal than our standard barrel. It also has been drilled out larger at one end and a piece of PTFE teflon tube(Not included) can be inserted to reduce the chances of "barrel lock" which can stop filament feeding resulting in a failed print and otherwise only solved with the oily rag trick // ❃❃ 2mm thick cotton heater tape for heat preservation, keep heater block and consumable work better. // Length: 62mm Width: 20mm Thickness: 2mm   Type: 0.4mm Extruder Brass Nozzle Print Head Color: Golden. Material: Brass Size:5*13mm Input Diameter:1.75mm Output Diameter:0.4mm   Type: Nozzle Throat Pipe Compatibility:3D Printer Outer Thread: M6 Length:30mm Nozzle Throat Outer Diameter:7mm Nozzle Throat Inner Diameter:4mm Filament Diameter:1.75mm Material: Stainless Steel   Name: Metal Part Color: Silver Size:20*20*10mm Screw: M6 and M3 Heating: 6mm   5PCS X Heater Tape 5PCS X Brass Nozzle 5PCS X Extruder Tube 5PCS X Heater Block...
  • PrimaCreator PC NMP 2468H MK10 MK10 Tamaño mixto x 0,20 mm 1
    Precio:  $7,571.00

    PrimaCreator PC NMP 2468H MK10 MK10 Tamaño mixto x 0,20 mm 1

    -Titulo Original : PrimaCreator PC-NMP-2468H-MK10 MK10 Mixed Size x 0.20mm, 1 x 0.40mm, 1 x 0.60mm, 1 x 0.80mm, Hardened Steel Nozzle-Fabricante : PRIMACREATOR-Descripcion Original: Premium high-quality nozzle for perfect prints " not to be compared with cheap Chinese nozzles made of low end material in old worn machinery. We only use the best // Manufactured with extreme precession tolerance of only 0.01 mm. Quality is controlled in every step of production to ensure a 100 percent perfect nozzle. Each nozzle is cleaned in ultrasonic bath // Hardened steel nozzle perfect for demanding and abrasive filaments like carbon, metal and glow in the dark. With a hardened steel nozzle, you don´t have to worry about your nozzle wearing out // Mk10 style nozzle with M7 thread for 1.75Mm filaments fits printers like wanhao I3, I3 plus, D4, D6, qiditech, flash forge dreamer, creator, finder, monoprice maker select, cocoon create, etc.¦ // What you get: 1 x 0.20Mm, 1 x 0.40Mm, 1 x 0.60Mm, 1 x 0.80Mm - Mk10 hardened steel nozzle (total 4Pcs nozzles) // Size:  |  Style: Fits to: Wanhao I3, D4, D6, qidi tech, Flash Forge dreamer, creator, Finder, monoprice Maker Select, cocoon create, qidi tech the premium nozzles from PrimaCreator are a Series of replacement nozzles that can make more difference for the result than you may Think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. All nozzles from PrimaCreator are made from the best high-quality Brass or steel (depending on Type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints. For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it's time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don't get the same results. After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation. The nozzle will now take shape with millimeter precision, the tolerance is less than 0.01 mm. The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. The nozzles are then checked for one last time and packed individually in a protective box “ ready to be shipped to you...
  • Micro Swiss All Metal Hotend con bloque de enfriamiento ranu
    Precio:  $9,549.00

    Micro Swiss All Metal Hotend con bloque de enfriamiento ranu

    -Titulo Original : Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.4mm Nozzle-Fabricante : MICRO-SWISS-Descripcion Original: Fits: Wanhao i3, Monoprice Maker Select 3D Printer v2, Cocoon Create 3D Printer // .4mm Nozzle Plated with HIGH LUBRICITY WEAR RESISTANT TwinClad XT Coating // Kit Includes: Thermal Barrier Tube, Plated Nozzle and Slotted Cooling block // Slotted Clamping system, No set screw to ding and damage thermal tube, Significantly better heat transfer // Made in USA by Micro Swiss // This is Micro Swiss All Metal Hotend kit with redesigned cooling block for Wanhao i3 with the following improvements: Micro Swiss All Metal Hotend Kit Features: All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn't have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. STEP BY STEP INSTALLATION INSTRUCTION https://store.micro-swiss.com/pages/micro-swiss-all-metal-hoten...
  • Anycubic 5 un. Printer 3D Bronce de 0.4 mm Boquilla Cabezal
    Precio:  $1,508.00
    Expira: 24/01/2020

    Anycubic 5 un. Printer 3D Bronce de 0.4 mm Boquilla Cabezal

    -Titulo Original : Anycubic 5Pcs 0.4mm Brass 3D Printer Nozzle Print Head M6 Threaded Nozzle for 1.75mm ABS PLA Filament-Fabricante : ANYCUBIC-Descripcion Original: 45°chamfer design,much easier for filament feeding // Smooth mating face,effectively prevent filament from leaking // Nozzle diameter size was carved, easier to be identified // Pointed mouth,compatible with Kossel 3d printer extruder // The appearance of nozzle is bright // Material: Brass Item size: 7*12mm Thread: M6 Nozzle diameter:0.4mm 5* 0.4mm 3D printer nozzl...
  • Impresora 3D Bronce V6 Extra Boquilla 3DMV6 4 un. 1,75 mm 0,
    Precio:  $4,691.00

    Impresora 3D Bronce V6 Extra Boquilla 3DMV6 4 un. 1,75 mm 0,

    -Titulo Original : 3D Printer Brass V6 Extra Nozzle 3DMV6-4Pcs 1.75mm 0.20mm/0.4mm/0.6mm/0.8mm (4pcs 0.2mm)-Fabricante : 3D MATALCHOK-Descripcion Original: We choose the best materials that we can find on market combined with high precision CNC maching to bring this high quality nozzles. // We strictly following the latest drawing to achieve best print result. // The flat surface tip of the nozzle which flattens down the layer is custom machined to each nozzle size.A small nozzle tip gives you high precision,and a wide nozzle tip assists in the smooth printing of larger layers. // A full collection of 3DMV6 Ecosystem nozzles,set in a soft foam cushion for protection.Print all the things in all the resolutions! // Compatible with V5/V6 heating block hotend extruder // Size: We choose the best materials that we can find on market combined with high precision CNC maching to bring this high quality nozzles.We strictly following the latest drawing to achieve best print result.The flat surface tip of the nozzle which flattens down the layer is custom machined to each nozzle size.A small nozzle tip gives you high precision,and a wide nozzle tip assists in the smooth printing of larger layers.All nozzles in the series are now individually identifiable with markings on the flats of the hex head making them even more convenient to work with.See the table on the left for identification.A full collection of 3DMV6 Ecosystem nozzles,set in a soft foam cushion for protection.Print all the things in all the resolutions! 12.5 mm * 7 mm 0.05mm-0.35mm 6mm 0.2/0.4/0.6/ 0.8 mm 1.75mm Filament 4pcs V6 Nozzle...
  • Micro Swiss Boquilla para All Metal Hotend Kit SOLO A2 Acero
    Precio:  $3,891.00

    Micro Swiss Boquilla para All Metal Hotend Kit SOLO A2 Acero

    -Titulo Original : Micro Swiss Nozzle for All Metal Hotend Kit ONLY A2 Hardened Steel .6mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: Micro Swiss MK10 All Metal Hotend Kit ONLY (M7 Threads) // A2 Hardened Tool Steel Plated with TwinClad XT // WEAR RESISTANT // Orifice size: .6mm // Made in USA by Micro Swiss // This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made from a A2 Steel and heat treated to 57-62 RC. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • CCTREE Printer 3D Actualización Llave de bricolaje 5 en 1 He
    Precio:  $2,069.00

    CCTREE Printer 3D Actualización Llave de bricolaje 5 en 1 He

    -Titulo Original : CCTREE 3D Printer Upgrade DIY Wrench, 5 in 1 Replacement Installtion Tool Multi-Function Flat Spanner for E3D MK8 MK10 Extruder Nozzle Heater Block (Pack of 2)-Fabricante : CCTREE-Descripcion Original: This is a must have tool for changing print nozzles, special design for E3D MK8 MK10 Nozzle.heater block // Multi-Purpose Wrench: 5 in 1, different open module fit different nozzle and heater block. // Put new nozzle to this socket screwdriver, spanner keep to hold heat block, screw nozzle in, must be tight and it is done. // Wrench only, other accessories demo in the picture is not included! // If you have any problem or question,please feel free to contact us // CCTREE is a professional supplier of 3D Printing filament,3D Printer and 3D Printer accessories. devoted to offer premium quality products to all cherished customers CCTREE has a professional R&D team and high quality after-sales service to ensure that you can purchase at a reliable price. If there are any questions or problem, please feel free to contact us, CCTREE Team will spare no efforts to assist with you The wrench fits for Ender 3,Ender 3 Pro,Ender 5,CR-10,CR-10S Series Creality 3d Printer Package includes: 2 x Wrenc...
  • Impresora 3D Boquilla + 4 herramientas de bricolaje para J H
    Precio:  $2,253.00

    Impresora 3D Boquilla + 4 herramientas de bricolaje para J H

    -Titulo Original : 3D Printer Nozzles + 4 DIY Tools for J-Head E3D V5 V6 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm Nozzle Tool for Nozzle Replacement, Spanner, Installation Tools …-Fabricante : BIAOBIAO-Descripcion Original: No more burnt fingers for you! This is a must have tool for changing print nozzles. Having the right tools makes all the difference in the world! // Multi-size High-precision extruder nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm // Compliant all M6 thread 3D printer: The nozzles used M6 thread, same as MK8 MK7 UM2 CR10 etc. // Special tools: special spanner and multi-function screwdriver can help you adjustment 3D Printer and change extruder nozzle more easy! // Note: Screwdriver maybe rust, but No effect on use. Spanner only fit for E3D heat block (20*16mm and 16*16mm) // This is High-precision extruder nozzle produce by CNC. High quality brass with M6 thread, compliant with all M6 thread 3D printer. Special tools make you change extruder nozzle FAST, SAFE and EASY. NOTICE: This spanner only for E3D heat blocks -(16*16mm & 20*16mm), it will not work with MK8 block (20*20mm) Turn on 3D Printer, set nozzle temperature to target (PLA: 80-220, ABS: 240-280). After heat done, use SPANNER to hold heat block, use Socket screwdriver to screw old nozzle out. old nozzle will be very hot, don't touch by hands!!! Put new nozzle to this socket screwdriver, spanner keep to hold heat block, screw nozzle in, must be tight and it is done. 0.2mm extruder nozzle * 1pc 0.3mm extruder nozzle * 1pc 0.4mm extruder nozzle * 2pcs 0.5mm extruder nozzle * 1pc 0.6mm extruder nozzle * 1pc 0.8mm extruder nozzle * 1pc Simple spanner * 1pc 3 in 1 screwdriver(1 Handle with 2 Heads) * 1p...
  • AJSPOW 20 un. Actualización de la Printer 3D Boquilla Resist
    Precio:  $1,876.00

    AJSPOW 20 un. Actualización de la Printer 3D Boquilla Resist

    -Titulo Original : AJSPOW 20PCS 3D Printer Nozzles | Upgrade Abrasion Resistant 0.4mm MK8 Nozzles | Brass 3D Printer Nozzle for 3D Printer Anet A8 Makerbot Creality CR-10 Ender 3-Fabricante : AJSPOW-Descripcion Original: 【Parameter】Input diameter 1.75mm, out thread: M6. // 【Premium Materials】The 3D printer nozzles are made of high quality brass material, sturdy and durable, brass can be used to print PLA, ABS and most any other non-abrasive materials. // 【Characteristics】MK8 Nozzle through long-term testing to solve the problem of plugging and missing materials to the greatest extent, low thermal conductivity, resistant to corrosion, high abrasion resistance. // 【Applicability and Compatibility】MK8 extruder nozzle fit for 3D printer Makerbot Anet A8, Creality CR-10 CR-10S S4 S5, compatible with all 1.75mm PLA, ABS 3D printer. // 【100%Satisfaction Guarantee】Our team strives for 100% customer satisfaction with manufacturers provided lifetime guarantee. If there are any problems with our products, contact us and we would be very happy to solve your problems. //...
  • SIENOC 5 paquetes 0.4mm Boquilla Printer 3D Extrusora Cabeza
    Precio:  $1,673.00

    SIENOC 5 paquetes 0.4mm Boquilla Printer 3D Extrusora Cabeza

    -Titulo Original : SIENOC 5 Packs 0.4mm Nozzle 3D Printer Extruder Print Head for MK8 Makerbot 1.75mm-Fabricante : SIENOC-Descripcion Original: Type£º 0.4mm 3D Printer Extruder Print Head // Size: 13x5.88mm // Screw thread: M6 // Material: Brass // Package Included:5x0.4mm 1.75mm MK8 3D Printer Print Hea...
  • Anet Placa de control de reemplazo de autoensamblaje  (H72K)
    Precio:  $5,823.00

    Anet Placa de control de reemplazo de autoensamblaje (H72K)

    -Titulo Original : Anet V1.5 Self Assembly Replacement Control Board for Anet A3 Desktop 3D Printer Reprap i3-12V Mother Board/Mainboard for 3D Printer (1PCS)-Fabricante : ANET-Descripcion Original: Highly-integrated mother board fits for Anet A3 3D Desktop Printer. // Upgrading circuit design offers it stable performance. // Adopts for MOS with high-perforamnce as a driver. // 12V power supply input receivable, with USB port. // Support the connection for Ramps1.4, 2004 LCD and 12864 LCD control board. // Motherboard Features: 1. Highly integrated one board, to solve the Ramps1.4 modular interface cumbersome, easy to trouble the problem. 2. Optimize the layout of the alignment and cooling design, so that the whole board performance more stable. 3. Support automatic leveling proximity probe, the customer can add their own automatic leveling leveling. 4. Large USB, more stable connection, the interface is more concise, wiring more convenient, more stable work, longer life. 5. The use of onboard 4 A4988 16 subdivision stepper drive board motor drive (Z axis two motor interface). 6. PWM DC 3-way output (1 large current, 3-way current, 2 small current). 7. The use of high-performance low resistance through the Mos tube to do the drive, cooling better. 8. The use of ST original power supply chip to support 12V power input to solve the Ramps voltage conversion chip heating problem. 9. Configuration and Ramps1.4 exactly the same, can be directly replace Ramps1.4. 10. Can be directly connected Ramps1.4, 2004 LCD control panel and 12864 LCD control panel ( remove the L-type adapter board ). Specifications: Brand: Anet Suitable for: Anet A3 3D Printer Voltage Input: 12V Mainboard Size: 10 * 9.5 * 2cm / 3.9 * 3.7 * 0.8in Mainboard Weight: 63g / 2.2oz Package Size: 12 * 11 * 3cm / 4.7 * 4.3 * 1.2in Package Weight: 80g / 2.8oz Package List: 1 * Control Board for Anet A3 3D Printer Note: Please pay more attention to the circuit diagram showed in the picture before mount it...
  • Boquilla MK8 resistente al desgaste con revestimiento 0.2
    Precio:  $2,998.00

    Boquilla MK8 resistente al desgaste con revestimiento 0.2

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle MK8 MakerBot, CraftBot, BQ Witbox, BQ Prusa I3 Hephestos .2mm (M2549-02)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: MakerBot Replicator 1, 2 , 2x, Mini, z18​, CraftBot 2, CraftBot PLUS, BQ Witbox, BQ Prusa I3 Hephestos // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .2mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • AFUNTA 7 un. Printer 3D Boquilla Garganta y 7 un. Impresora
    Precio:  $1,692.00

    AFUNTA 7 un. Printer 3D Boquilla Garganta y 7 un. Impresora

    -Titulo Original : AFUNTA 7 Pcs 3D Printer Nozzle Throat & 7 Pcs 0.4mm Printer Extruder Brass Nozzle Print Heads & 3 Pcs 0.4mm Drill Bits Compatible with All 1.75mm PLA ABS 3D Printer, Works with Anet A8-Fabricante : AFUNTA-Descripcion Original: NOZZLE THROAT: Outer Thread - M6; Inner Diameter - 2mm; Length - 30mm; Filament Diameter - 1.75mm; Material - Stainless Steel. // 0.4MM EXTRUDER BRASS NOZZLE PRINT HEAD: Color - Golden; Material - copper (brass); Size - 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm. // CLEANING DRILL BITS: Diameter - 0.4mm; Length - 8mm; The length of shank - 20mm // COMPATIBLE: Compatibility with all 1.75mm PLA ABS 3D printer, works with Anet A8 // NOTE: After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts. //...
  • Siquk 30 Un. Mk8 Boquilla 0.4mm Boquilla Printer 3d Extrusor
    -10.8%
    Precio:  $1,131.00 $1,009.00
    Expira: 30/01/2020

    Siquk 30 Un. Mk8 Boquilla 0.4mm Boquilla Printer 3d Extrusor

    -Titulo Original : SIQUK 30 Pieces MK8 Nozzle 0.4mm 3D Printer Nozzles Extruder Print Head for 3D Printer Makerbot Creality CR-10(Bonus: 1Pc Plastic Box)-Fabricante : SIQUK-Descripcion Original: Parameter: input diameter 1.75mm; output diameter 0.4mm; out thread: M6 // Applicability and compatibility: fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer // Premium material: the 3D printer nozzles are made of high quality brass material, sturdy and durable, connect with M6 out thread, easy to install // Package include: totally 30 pcs MK8 nozzles with a Storage Box // Attention: small parts, please keep away from children // Color: gold Material: brass Hexagon diameter: 6 mm Screw thread: M6 Input diameter: 1.75 mm Output diameter: 0.4 mm Quantity: 30 pieces in total 30 x 0.4 mm Nozzle print head 1 x Plastic box SIQUK are devoted to offer premium quality products to all cherished customers. Meanwhile supply If there are any questions, please feel free to contact us, SIQUK Customer Service Team will spare no efforts to assist with you within 24 hours...
  • TRIGORILLA ANYCUBIC Printer 3D 0.4mm Bronce Boquilla Extruso
    Precio:  $1,315.00

    TRIGORILLA ANYCUBIC Printer 3D 0.4mm Bronce Boquilla Extruso

    -Titulo Original : TRIGORILLA ANYCUBIC 0.4mm 3D Printer Brass Nozzle Extruder Hotend Thread for I3 Mega 1.75 mm Filament ABS PLA 5PCS-Fabricante : TRIGORILLA-Descripcion Original: ❀ Bore diameter: 0.4mm; Screw thread inner diameter: 1.75mm // ❀Made of brass, it is sturdy and reliable. Corrosion and wear resistance are great. // ❀ 45°chamfer design, feeding easier for filament. // ❀Widely use for 1.75mm filament, compatible with I3 Mega and Kossel 3D printer extruder // Type: extruder print head Material: Brass Color: golden 5* TRIGORILLA ANYCUBIC 0.4mm Nozzles for 3D Printe...
  • Boquilla para UP resistente al desgaste con recubrimiento Mi
    Precio:  $2,998.00

    Boquilla para UP resistente al desgaste con recubrimiento Mi

    -Titulo Original : Micro Swiss Plated Wear Resistant nozzle for UP Box+ / UP300 / Cetus Extruder / Afinia H800+, H800 & H480-02 (.4mm)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: UP Box+ / UP300 / Cetus Extruder / Afinia H800+, H800 & H480-02 // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Orifice size: .4mm // Made in USA by Micro Swiss // This nozzle will fit UP Plus, UP Mini and the Up Box manufactured after March 2015. Nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle. **** Please note that this nozzle may not fit on older models of the Mini and Plus 2. **...
  • Anet Placa de control de reemplazo de autoensamblaje V1.5 pa
    Precio:  $5,859.00

    Anet Placa de control de reemplazo de autoensamblaje V1.5 pa

    -Titulo Original : Anet V1.5 Self Assembly Replacement Control Board for Anet E10 Desktop 3D Printer Reprap i3-12V Mother Board/Mainboard for 3D Printer (1PCS)-Fabricante : ANET-Descripcion Original: Highly-integrated mother board fits for Anet E10 3D Desktop Printer. // Upgrading circuit design offers it stable performance. // Adopts for MOS with high-perforamnce as a driver. // 12V power supply input receivable, with USB port. // Support the connection for Ramps1.4, 2004 LCD and 12864 LCD control board. // Motherboard Features: 1. Highly integrated one board, to solve the Ramps1.4 modular interface cumbersome, easy to trouble the problem. 2. Optimize the layout of the alignment and cooling design, so that the whole board performance more stable. 3. Support automatic leveling proximity probe, the customer can add their own automatic leveling leveling. 4. Large USB, more stable connection, the interface is more concise, wiring more convenient, more stable work, longer life. 5. The use of onboard 4 A4988 16 subdivision stepper drive board motor drive (Z axis two motor interface). 6. PWM DC 3-way output (1 large current, 3-way current, 2 small current). 7. The use of high-performance low resistance through the Mos tube to do the drive, cooling better. 8. The use of ST original power supply chip to support 12V power input to solve the Ramps voltage conversion chip heating problem. 9. Configuration and Ramps1.4 exactly the same, can be directly replace Ramps1.4. 10. Can be directly connected Ramps1.4, 2004 LCD control panel and 12864 LCD control panel ( remove the L-type adapter board ). Specifications: Brand: Anet Suitable for: Anet E10 3D Printer Voltage Input: 12V Mainboard Size: 10 * 9.5 * 2cm / 3.9 * 3.7 * 0.8in Mainboard Weight: 63g / 2.2oz Package Size: 12 * 11 * 3cm / 4.7 * 4.3 * 1.2in Package Weight: 80g / 2.8oz Package List: 1 * Control Board for Anet E10 3D Printer Note: Please pay more attention to the circuit diagram showed in the picture before mount it...
Mostrar del 1 al 24 (de 235 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]