Arriba

Impresión > Impresión 3D > Picos Nozzle

Mostrar: 
Mostrar del 1 al 24 (de 196 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Impresora 3d Extrusora Hot End Mk7 Mk8 Boquilla 0.4mm Montad
    Precio:  $2,779.00
    Expira: 21/06/2021

    Impresora 3d Extrusora Hot End Mk7 Mk8 Boquilla 0.4mm Montad

    -Titulo Original : 3D Printer Extruder Hot End MK7 MK8 Nozzle 0.4mm Assembled 1.75mm Filament Direct Feed 12V Prusa i3 Eewolf-Fabricante : EEWOLF-Descripcion Original: APPLICATION: extruder for 3D printer prusa i3 diy kit // BRASS NOZZLE SIZE: 13mm*6mm // TUBE INNER DIAMETER: 2mm / Length: 30mm // MATERIAL: Stainless Steel Brass aluminum // PACKAGE INCLUDE: Assembled extruder (nozzle, tube, heat block, thermistor, heater and M6 nut) // 3D Printer Extruder Hot End Nozzle 0.4mm Assembled 1.75mm Filament 12V Direct Feed Eewolf Specification for Extruder Tube: Material : Stainless Steel Outer Thread : M6 Inner Diameter : 2mm Length : 30mm Filament Diameter : 1.75mm Specification for Extruder Brass Nozzle Nozzle: 0.4mm Input Diameter: 1.75mm Output Diameter: 0.4mm Material: copper (brass) Size: 13mm*6mm Thermistor: 100K ohm NTC Heater: 12V 40W Heat block: Material: Aluminum (20*20*10mm) Warning!! Small parts, keep away from children...
  • Boquilla Micro Swiss resistente al desgaste para LulzBot 0.3
    Precio:  $5,549.00

    Boquilla Micro Swiss resistente al desgaste para LulzBot 0.3

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend .3mm-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for LulzBot TAZ 5, LulzBot TAZ 6, LulzBot Mini, Hexagon Hotend // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 3mm Filament // Orifice size: .3mm // Made in USA by Micro Swiss // This is Plated Wear Resistant Nozzle for LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend M6 thread, 3mm Filament. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • 5 Boquillas De Impresora 3d Mk10 M7 0.8mm 1.75mm Abs Pla
    Precio:  $3,759.00

    5 Boquillas De Impresora 3d Mk10 M7 0.8mm 1.75mm Abs Pla

    -Titulo Original : 5pcs Brass 3D Printer MK10 Extruder Nozzle 0.8mm M7 Thread - Makerbot, Flash Forge, Dremel, Wanhao Nozzle For 1.75mm ABS PLA Filament-Fabricante : BALITENSE...
  • Aokin Mk8 Boquilla Para Printer 3d 24 Un. M6 Bronce Extruder
    Precio:  $3,819.00

    Aokin Mk8 Boquilla Para Printer 3d 24 Un. M6 Bronce Extruder

    -Titulo Original : Aokin MK8 Nozzle for 3D Printer, 24Pcs M6 Brass Extruder Head Hotend Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm & 5pcs Cleaning Needles fit 1.75mm Filament Makerbot Creality CR-10 ANET A8-Fabricante : AOKIN-Descripcion Original: Compatibility: This printer nozzles are compatible with Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap printer. // Material and Size: These printer nozzle are made of brass, Out Thread: M6, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm. // Nozzle Cleaning Needles: 5 pieces cleaning needles have 5 different size: 0.2 mm, 0.3 mm, 0.4mm, 0.6mm and 0 .8mm, suitable for cleaning most of your 3D Printer nozzles. // Premium Quality: The cleaning needles are made of high quality stainless steel, flexible, sturdy and durable. With a handle, you can twist the drill when using. // Note: After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts. // Color: Material: Brass Compatibility: Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap printer Out Thread: M6 Filament Diameter: 1.75mm Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Material: Stainless steel Bit diameter: 0.2mm 0.3mm 0.4mm 0.6mm 0.8mm Free box: Convenient for collecting the cleaning kit 3x 0.2mm Printer Extruder Nozzle 3x 0.3mm Printer Extruder Nozzle 6x 0.4mm Printer Extruder Nozzle 3x 0.5mm Printer Extruder Nozzle 3x 0.6mm Printer Extruder Nozzle 3x 0.8mm Printer Extruder Nozzle 3x 1.0mm Printer Extruder Nozzle 1 x 0.2mm cleaning needle 1 x 0.3mm cleaning needle 1 x 0.4mm cleaning needle 1 x 0.6mm cleaning needle 1 x 0.8mm cleaning needl...
  • Kit De Limpieza + 10 Boquillas 0.4mm Mk8 Para Hellbot Magna
    Precio:  $3,349.00

    Kit De Limpieza + 10 Boquillas 0.4mm Mk8 Para Hellbot Magna

    -Titulo Original : 21 Pieces 3D Printer Nozzle and Cleaning Kit, 10 Pack 0.4 mm MK8 Nozzles, 10 Pack 0.4 mm Needles and 1 Pack Tweezers Tool kit, Stainless Steel Nozzle Cleaning Tool Kit-Fabricante : Leinuosen-Descripcion Original: Boquilla y kit de limpieza: el paquete incluye 10 piezas de agujas de limpieza de boquillas de 0,4 mm embaladas en un recipiente seguro, pinzas puntiagudas de 1 pieza y 10 piezas de boquillas MK8 de 0,4 mm Boquillas MK8 de 10 piezas: el diámetro de entrada de la boquilla de la impresora 3D es 1.75 mm, el diámetro de salida es 0.4 mm y el diámetro del hexágono es 6 mm; Compatible con la impresora 3D Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, Hellbot Magna y apto para todas las impresoras 3D PLA ABS 3D de 1.75 mm Pinzas: las pinzas de impresión 3D son buenas para el mantenimiento de las boquillas y la limpieza del exceso de material de soporte; Es una pinza de precisión curva antiestática, no magnética. Agujas: 10 piezas de agujas flexibles de acero inoxidable de 0,4 mm de diámetro que son buenas para el mantenimiento suave de sus boquillas y lugares difíciles de alcanzar como los engranajes de alimentación Características: la boquilla de la impresora 3D y el kit de limpieza es un kit duradero para varios propósitos; Elimine el exceso de plástico y atascos transparentes con alta precisión, también es bueno para el mantenimiento general de la sección del disipador de calor...
  • Impresora 3d De Tungsteno M6 Boquilla Extrusora 0.6mm Diamet
    Precio:  $17,659.00

    Impresora 3d De Tungsteno M6 Boquilla Extrusora 0.6mm Diamet

    -Titulo Original : Tungsten 3D Printer M6 Extruder Nozzle, 0.6mm Diameter-Fabricante : MIDWEST TUNGSTEN SERVICE-Descripcion Original: LONG LASTING and durable tungsten alloy 3D printer nozzle stands up to the most abrasive filler materials // SIZE: M6 extruder nozzle has a 0.6mm orifice diameter and is compatible with a wide variety of printer setups // QUALITY designed tungsten alloy material significantly reduces wear over time // SAFE and easy to use: tungsten alloy is completely non-toxic. Simply swap out your current nozzle and start printing // UNITED STATES based manufacturing & customer service staff are here to help you // Save money and reduce printer maintenance! High quality tungsten alloy is resistant to wear and reduces nozzle diameter erosion over time. Since the tungsten alloy 3D printer nozzle maintains its shape and dimension, your print parameters can remain constant even when printing with abrasive materials. If you work with abrasive materials such as those found in glow-in-the-dark or metal-filled filaments, tungsten is a must-have upgrade! The same high performance metal used in rocket ships and race cars can now improve your 3D printing. The extruder nozzle ships safely in packs of one each...
  • Boquilla E3D Bronce V6 genuina 1.75 mm x 0.25 mm (BOQUILLA V
    Precio:  $4,639.00

    Boquilla E3D Bronce V6 genuina 1.75 mm x 0.25 mm (BOQUILLA V

    -Titulo Original : Genuine E3D Brass V6 Nozzle - 1.75mm x 0.25mm (V6-NOZZLE-175-250)-Fabricante : E3D-Descripcion Original: Genuine E3D Parts // 0.25mm V6 Brass Nozzles // Modify your 3D printer to print fine details or large parts with E3D's V6 nozzles // These nozzles will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers // The widest selection of high-performance brass nozzles on the market // The widest selection of high-performance brass nozzles on the market, engineered to 3D print perfectly smooth layers. Modify your 3D printer to print fine details or large parts with E3D's V6 nozzles. These nozzles are fully integrated into the E3D ecosystem of 3D printer parts, and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers. Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of retraction. The flat surface tip of the nozzle which flattens down the layer is custom machined to each nozzle size. A small nozzle tip gives you high precision, and a wide nozzle tip assists in the smooth printing of larger layers. All nozzles in the series are now individually identifiable with markings on the flats of the hex head making them even more convenient to work with...
  • correa para Creality Ender 3 / Pro, CR10, CR10S, Tronxy X3
    Precio:  $4,729.00

    correa para Creality Ender 3 / Pro, CR10, CR10S, Tronxy X3

    -Titulo Original : WINSINN Upgrade 2020 Profile X-axis Synchronous Belt Straighten Tensioner, Works with Creality Ender 3 / Pro, CR10, CR10S, Tronxy X3 - Black -Fabricante : WINSINN -Descripcion Original: CABLE XLR EQUILIBRADO DE ALTA CALIDAD: ideal para conciertos en vivo, aplicaciones de grabación, conexión de micrófono profesional a una interfaz de audio o mezclador, salidas de mezclador a parlantes y todas las demás necesidades de audio, música y sonido. ESCUDO INTERIOR DE PVC CONDUCTIVO DOBLE: 98% de escudo trenzado Envoltura de hilo de algodón que reduce el ruido y todas las interrupciones de ruido y estática, cancela profesionalmente el zumbido y el ruido mientras mejora la respuesta de alta frecuencia FUNCIONA BIEN PARA LA ILUMINACIÓN DMX: debido a su 98% de escudo trenzado, también funcionará muy bien para aplicaciones de iluminación DMX en presentaciones en vivo, salas de conciertos, escuelas, iglesias, iluminación de estudio y grabación. PUNTOS DE CONTACTO BAÑADOS EN ORO: Alivia la tensión del cable con puntos de contacto chapados en oro, conectores de carcasa de metal negro con conectores autobloqueantes para una conexión estable sin necesidad de preocuparse por la estabilidad del cabl...
  • Anet Actualizacion De Cama Caliente De Aluminio Mk2 Mk3 De 1
    Precio:  $6,479.00

    Anet Actualizacion De Cama Caliente De Aluminio Mk2 Mk3 De 1

    -Titulo Original : Anet Aluminum MK2 MK3 12V Heated Bed Hotbed Upgrade with Hotbed Wire Cable Line for for Anet A8 A6 3D Printer, Black 220x220mm-Fabricante : ANET-Descripcion Original: Large-size aluminum printing platform. // Aluminum plate can bear higher temperature. // Reduce alice edge rate. // Size of hotbed: 220x220mm ( 8.6" x 8.6" square), suit for Anet A8, A6 3D Printer. // Length of cable: 90cm // Description of heated bed: Product resistance: 12V voltage, the resistance of 1.2 ohms Product voltage: 12V Product Size: 220mm * 220mm * 3mm hole spacing 214mm Product process: aluminum plate Product color: black on the back, front on silver white Product thickness: 3mm Feature of heated bed: 1, the whole board full gold process, the cost is much higher than the spray tin plate! 2, the whole board after optical short circuit, open circuit detection. 3, heating table and aluminum substrate into one, better temperature stability. 4, the new circuit, power supply power stability. 5.Aluminum MK2 MK3 heated bed is the updated version of MK2B & MK2A. Description of heated bed cable: Item Type: hotbed line for 3d printer Length : 90cm Suitable for: Mendel RepRap i3 3D printer A8 A6 and so on. Feature of heated bed cable: 1. Additonal positive and negative wires to utilise all of the heatbed pins and reduce load. 2. Silicone stranded wires for better flexibility and wear. Notes: Our Anet 3D printer motherboard support 12V hotbed, do not support 24V. 12V connection: a line then 1, another line at the same time then 2,3 Package Including: 1* 3d printer hotbed 220x220 1* 90cm heatbed wir...
  • 17 Sets Printer 3D Boquilla Needle Kit de Limpieza 0.4mm / 0
    Precio:  $3,129.00

    17 Sets Printer 3D Boquilla Needle Kit de Limpieza 0.4mm / 0

    -Titulo Original : 17Sets 3D Printer Nozzle Needle Cleaning Kit, 0.4mm/0.35mm Needles and Tweezer Tool kit - Filament Cleaner Drill Bits for 3D Printer by MKOEM-Fabricante : MKOEM-Descripcion Original: * Great Value: This Set Include 16pcs Stainless Needle, 1pc Curved Precise Tweezers // * High Performance: The Needle is Flexible, Won't Break, Twist Easily; The High Quality Tweezer Very Useful for Clean Filament // * Widely Compatible:Suitable for All 0.4mm 3D Printer Nozzle in Market, Professional of Cleaning up the 3D Printer Extruder Hot Ends and Cleaning Excess 3D Printed Filament // * Good Package: It's Packed by One Clean Plastic Box, which Easy to Carry and Stock // *Factory Guarantee: The 17 Sets Is Great Tool for 3D Printers, 100% Satisfy Guarantee // All of Our Needles is Made of High Quality Stainless Steel: It's Flexible and Won't Break Easily; Also, The Needle with Handle, You Can Easily Twist During Use The Curved Tweezer is Also Great Tool for Nozzle Maintenance and Cleaning This 17pcs Set is Very Suitable to Cleaning the 3D Printer Nozzle for Filament Stuck 8Pcs of 0.4mm Stainless Needles (Color: Silver); 8pcs of 0.35mm Stainless Needles (Color: Golden); 1pc of Curved Precise Tweezers; 1pcs of Clean Plastic Box; You can Stock Them More Easy and Safe...
  • Set 30 Boquillas Mk8 Para Impresoras 3d 0.2, 0.3, 0.4, 0.5mm
    Precio:  $2,899.00

    Set 30 Boquillas Mk8 Para Impresoras 3d 0.2, 0.3, 0.4, 0.5mm

    -Titulo Original : 30 Pack 3D Printer Nozzles 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm Print Head with Storage Box for Makerbot Creality CR-10 by Standie-Fabricante : SUCOOL-Descripcion Original: Package include: totally 30 pcs MK8 nozzles in 7 sizes, 3 x 0.2mm, 3 x 0.3mm, 12 x 0.4mm, 3 x 0.5mm, 3 x 0.6mm, 3 x 0.8mm, 3 x 1.0mm // DIAMETER - Input diameter: 1.75mm, output diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.out thread: M6 // the nozzle extruder are made of high quality brass material, not easy to get rust or erosion,sturdy and durable, providing long servicing life,connect with M6 out thread, easy to install // the 3D printer nozzles are made of brass material,sturdy and durable, connect with M6 out thread, easy to install // the nozzles surfaces are glossy, the chamfers and internal face are rounded and smooth which can reduce the resistance and avoid blocking of the filament, the contact surface can prevent the leakage from the nozzles //...
  • CCTREE 10 un. MK8 Boquilla Extrusora para Printer 3D Makerbo
    Precio:  $3,129.00

    CCTREE 10 un. MK8 Boquilla Extrusora para Printer 3D Makerbo

    -Titulo Original : CCTREE 10pcs MK8 Extruder Nozzle for 3D Printer Makerbot Creality CR-10 Ender 3 5 Different Size 0.2mm, 0.4mm.0.6mm.0.8mm,1.0mm-Fabricante : CCTREE-Descripcion Original: Input Diameter :1.75mm // Output Diameter: 0.2mm,0.4mm,0.4mm.0.6mm.0.8mm,1.0mm // Material: Copper (Brass) // 10Pcs Extruder Brass Nozzle // 5 different size (each size 2pcs) // Specification:13mm*6mm Material: Brass of National standard Weight:2g Nozzle Precision:0.2mm/0.4mm/0.6mm/0.8mm/1.0mm Hexagon Diameter:6mm Screw Thread :M6 Input Diameter: 1.75mm Package Included: 10x nozzles Size:0.2mm,0.4mm,0.6mm,0.8mm,1.0mm Each size 2pc...
  • Kit de pinzas de impresión 3D de Limpieza para impresoras 3D
    Precio:  $3,819.00

    Kit de pinzas de impresión 3D de Limpieza para impresoras 3D

    -Titulo Original : 3D Printing Tweezers – Cleaning Tool for 3D Printers – Filament Removal and Nozzle Cleaner Accessories-Fabricante : AMX3D-Descripcion Original: CLEAN UP TOOL: Add the versatile tweezers to your 3D printing accessories kit for efficient support material removal, producing cleaner prints. // NOZZLE CLEANING: Prevent burnt fingers when cleaning the printer nozzle and removing hot, oozing filament. // STAINLESS STEEL:The 5” long tweezer 3D printing tool is made of strong, high quality coated stainless steel for a comfortable grip. // PRECISION & ACCURACY: The printer tool’s fine steel pointed tips help get under, lift and remove support material in hard to reach places. // AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing supplies of the highest quality. If there are any problems with your 3D Printer Tweezersjust let us know! // These 5 long, comfort grip 3D printing clean up tweezers are the perfect printer accessories for removing excess plastic from 3D prints for a cleaner finish, and for cleaning up the printer nozzle and removing hot, oozing filament before and after printing, keeping your fingers well out of the way. Made from stainless steel for strength and durability, the convenient printing tool is 5” long and coated for comfort and ease of use. With fine ends that come to a precision point, the tweezers grip even small printing imperfections and, when necessary, dig into the print’s support structure in hard to reach places. Strong, durable and versatile, tweezers are essential tools in any 3D printing cleaning accessories kit, and this high quality tool is perfect for beginners, experts or as a practical gift for anyone with a 3D printer. Great 3D prints start with the best tools. Providing everything you need for truly spectacular results (just like the ones on the 3D printer box!), AMX3d only sell the highest quality 3D print accessories and toolkits, so you won’t be disappointed...
  • Balitensen Printer 3d Bronce Mk10 Boquilla Extrusora 0.4mm M
    Precio:  $3,439.00

    Balitensen Printer 3d Bronce Mk10 Boquilla Extrusora 0.4mm M

    -Titulo Original : BALITENSEN 3D Printer Brass MK10 Extruder Nozzle 0.4mm M7 Thread for CTC Flashforge Dremel Wanhao 1.75mm Filament ABS PLA(Pack of 5)-Fabricante : BALITENSEN-Descripcion Original: Material: brass Size: 13 x 9mm Nozzle ID: 0.4mm Screw OD: 9mm Net Weight: 4g/pcs 5 x MK10 Nozzle 0.4mm Note: we can offer this nozzle with 0.2mm, 0.3mm, 0.5mm, 0.6mm, 0.8mm as well...
  • Boquilla RepRap M6 resistente al desgaste con revest. 0.2mm
    Precio:  $5,549.00

    Boquilla RepRap M6 resistente al desgaste con revest. 0.2mm

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle RepRap - M6 Thread 1.75mm .2mm (All Printers with a E3D V4 / V5 / V6 1.75 Hotend/Prusa i3 MK2 / MK2S / MK3)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: E3D V5-V6 Hotend with 1.75mm Filament // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .2mm // Made in USA by Micro Swiss // This is RepRap style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla Micro Swiss resistente al desgaste Boquilla .4mm
    Precio:  $5,549.00

    Boquilla Micro Swiss resistente al desgaste Boquilla .4mm

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for E3D Volcano Hotend 1.75mm .4mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: E3D Volcano // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .4mm // Made in USA by Micro Swiss // This is Micro Swiss Plated Wear Resistant nozzle for E3D Volcano hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla para impresora 3D de 1.75 mm de filamento V5-V6 M6
    Precio:  $3,099.00

    Boquilla para impresora 3D de 1.75 mm de filamento V5-V6 M6

    -Titulo Original : uxcell 10pcs 3D Printer Nozzle,Brass V6 Nozzle 0.2mm,Extruder Print Head for 1.75mm Filament V5-V6 M6 3D Printer-Fabricante : uxcell-Descripcion Original: Precise Design--The 1.75mm Input 0.2mm extruder nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer. Excellent Cleaning Needles---The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs. High material---the 3D printer nozzle are made of high quality brass material, Against rust or erosion,sturdy and durable, connect with M6 out thread, easy to install Applicability and compatibility---Fit for External M6 thread connection, compatible with all V5 V6 1.75mm PLA ABS 3D Printers. Note---After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts...
  • Creality Original 4010 Blower 40x40x10MM 24V DC Cooling F...
    Precio:  $3,869.00

    Creality Original 4010 Blower 40x40x10MM 24V DC Cooling F...

    -Titulo Original : Creality Original 4010 Blower 40x40x10MM 24V DC Cooling Fan and 24V Circle Fan for 3D Printer Parts Ender 3/Ender 3 Pro-Fabricante : CREALITY 3D-Descripcion Original: Use For :Creality Ender 3 // Material:Plastic // Operation Voltage: DC 24V // Weight: 0.078KG // Package included: 2Pcs 24v 4010 Fan and 24V Circle Fan // Style: Cooling Fan: Volume: 4010 Weight: 0.078KG Type: blowers, humidifiers Bearings: Oil-bearing Operation Voltage: DC 24V Use For :Creality Ender 3 1x 4010 Blower Fan 1x Circle Fa...
  • Micro Swiss Boquilla para All Metal Hotend Kit SOLO A2 Acero
    Precio:  $7,199.00

    Micro Swiss Boquilla para All Metal Hotend Kit SOLO A2 Acero

    -Titulo Original : Micro Swiss Nozzle for All Metal Hotend Kit ONLY A2 Hardened Steel .6mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: Micro Swiss MK10 All Metal Hotend Kit ONLY (M7 Threads) // A2 Hardened Tool Steel Plated with TwinClad XT // WEAR RESISTANT // Orifice size: .6mm // Made in USA by Micro Swiss // This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made from a A2 Steel and heat treated to 57-62 RC. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Correa eje Y para impresora 3D Creality Ender-3
    Precio:  $5,319.00

    Correa eje Y para impresora 3D Creality Ender-3

    -Titulo Original : CHPOWER Upgrade 4020 Y-axis Synchronous Belt Stretch Straighten Tensioner for Creality 3D Printer Ender-3 Aluminum Profile 40x20mm, Black -Fabricante : CHPOWER -Descripcion Original: New N2QAYB001023 Replace Remote fit for Blu-Ray Player DMP-BDT270 DMP-BDT271 DMP-BDT175 DMP-BDT174 DMP-BDT171 DMP-BDT170 DMP-BDT166 DMP-BDT165 DMP-BD833 DMP-BD83; Pre-programmed, No program required; Just install brand new battery to use; Package included: 1 x Remote Control; ...
  • Impresora 3d Boquilla Kit De Limpieza 0.4mm Agujas Y Pinzas
    Precio:  $3,819.00

    Impresora 3d Boquilla Kit De Limpieza 0.4mm Agujas Y Pinzas

    -Titulo Original : 3D Printer Nozzle Cleaning Kit - 0.4mm Needles and Tweezers Toolkit - Stainless Steel Nozzle Cleaning Tool Kit - Set of 12-Fabricante : ZEELO-Descripcion Original: Great quality tweezers and 10pcs of 0.40mm nozzle cleaning needles packed in one safe container! // Anti-Static, Non-Magnetic Straight and Angled Precision Tweezers; Every tweezers is plated resistive ESD coating, which prevents static damage to electronic components. Great for nozzle maintenance and cleaning excess support material // 10 pcs of 0.40mm diameter flexible stainless steel needles; Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears // Handy, safe and stylish container; All of the items come in a neat plastic tube with a screw lid to keep them well organized and safely together // Compatible with most well known 3D Printers on the market (e.g. Duplicator, MakerBot, RepRap etc.) //   The needles aremade of quality stainless steel, flexible and won't break easily, with a handlefor easily twisting. The tweezershave Fine tips with non-magnetic coating. Great for repairing small wires,screws, circuit board welding,  watch and reaching where your fingers can't.Suitable for high-density integrated circuit chip within the operation Wide suitable:Compatible with most of 3D printers on the market such as Duplicator, MakerBot,RepRap etc.   Wrapped in aplastic box, well organized, easy to find while you need it.   Needle: Material: stainlesssteel Needle diameter:0.4 mm The Needlelength: 7.5 cm The length ofshank: 3 cm Total length:10.5 cm   Total length: Straighttweezer: 12cm Angled tweezer:12.5cm   2 Tweezers and10pcs of 0.40mm needles for cleaning and unclogging 3D printer nozzles.  Comesin a hard plastic tube for convenient storage...
  • Sindoh RDP14100 AS 3Dwox Dp200 / 1 Boquilla (Dp200 y 3Dwox 1
    Precio:  $51,929.00

    Sindoh RDP14100 AS 3Dwox Dp200 / 1 Boquilla (Dp200 y 3Dwox 1

    -Titulo Original : Sindoh RDP14100-AS 3Dwox Dp200/1 Nozzle (Dp200 and 3Dwox 1 Only)-Fabricante : SINDOH-Descripcion Original: Sindoh // Nozzle // 3Dwox Dp200 3D printer // 3Dwox Dp200/1 nozzle (Dp200 and 3Dwox 1 only). 3Dwox Dp200/1 nozzle helps users build better models with rigid materials such as PLA and ABS...
  • Boquilla Micro Swiss Plated para LulzBot TAZ 5 LulzBot Mini
    Precio:  $5,549.00

    Boquilla Micro Swiss Plated para LulzBot TAZ 5 LulzBot Mini

    -Titulo Original : Micro Swiss Plated Nozzle for LulzBot TAZ 5, LulzBot Mini, Hexagon Hotend Style .5mm-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for LulzBot TAZ 5, LulzBot Mini, Hexagon hotend // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Upgrade // Orifice size: .5mm // Made in USA by Micro Swiss // Micro Swiss plated nozzle for LulzBot, M6 thread, 3mm Filament, Hexagon hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • 22 Boquillas Mk8 Para Cr-10 Anet A8 Cr-10 M6 De 0.2 A 1.00mm
    Precio:  $3,809.00

    22 Boquillas Mk8 Para Cr-10 Anet A8 Cr-10 M6 De 0.2 A 1.00mm

    -Titulo Original : 22pcs 3D Printer Nozzles,MK8 Brass Extruder Nozzle Print Head and 7pcs Cleaning Needles for 1.75mm Makerbot Creality CR-10 ANET A8 CR-10 M6 3D Printer. (0.2mm,0.3mm,0.4mm,0.5mm,0.6mm,0.8mm,1.0mm)-Fabricante : WedFeir-Descripcion Original: Specification: Color: gold Material: brass Output diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm Input diameter: 1.75 mm Screw thread: M6 Quantity: 29pcs Package Included: 2 x 0.2 mm 3D printer nozzles 2 x 0.3 mm 3D printer nozzles 10 x 0.4 mm 3D printer nozzles 2 x 0.5 mm 3D printer nozzles 2 x 0.6 mm 3D printer nozzles 2 x 0.8 mm 3D printer nozzles 2 x 1.0 mm 3D printer nozzles 1 x 0.2mm cleaning needle 1 x 0.3mm cleaning needle 1 x 0.4mm cleaning needle 1 x 0.5mm cleaning needle 1 x 0.6mm cleaning needle 1 x 0.8mm cleaning needle 1 x 1.0 mm cleaning needl...
Mostrar del 1 al 24 (de 196 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]