Arriba

Impresión > Impresión 3D > Filamentos

Mostrar: 
Mostrar del 1 al 24 (de 588 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [1K9F2HII]
    Precio:  $9,319.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [1K9F2HII]

    -Titulo Original : PLA Filament 1.75mm, Geeetech 3D Printer PLA Filament,1.75mm,1kg per Spool,Blue-Fabricante : GEEETECH-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento Termico 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ITZO8J2]
    Precio:  $12,409.00

    Filamento Termico 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ITZO8J2]

    -Titulo Original : Gizmo Dorks 1.75mm ABS Filament 1kg / 2.2lb for 3D Printers, Color Change Purple to Pink-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7PFS4J97]
    Precio:  $9,629.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7PFS4J97]

    -Titulo Original : OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer, Light Gray-Fabricante : OVERTURE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento Nylon 2.85mm 1kg COLOR FOTO-1 IMP 3D [0LAJNAUW]
    Precio:  $11,479.00

    Filamento Nylon 2.85mm 1kg COLOR FOTO-1 IMP 3D [0LAJNAUW]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) Nylon Filament 1kg / 2.2lbs for 3D Printers, White-Fabricante : GIZMO DORKS-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUWO]
    Precio:  $10,589.00

    Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUWO]

    -Titulo Original : SainSmart Clear Flexible TPU 3D Printing Filament, 1.75 mm, 0.8 kg, Dimensional Accuracy +/- 0.05 mm-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market that accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, WanHao & Qidi, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby or prototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 0.8 kg/1.76 lb of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.8 kg Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 1x SainSmart TPU Flexible Filament 1.75mm 0.8kg vacuum sealed w/ desiccan...
  • Filamento ABS 3.0mm 1kg COLOR FOTO-1 IMP 3D [1A1BHM76]
    Precio:  $7,989.00

    Filamento ABS 3.0mm 1kg COLOR FOTO-1 IMP 3D [1A1BHM76]

    -Titulo Original : HATCHBOX ABS 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 3.00 mm, Yellow-Fabricante : HATCHBOX-Descripcion Original: 1 KG (approximately 2.20 lbs.) Spool // 3.00mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) // ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant // Recommended Extrusion/Nozzle Temperature 210°C - 240°C (410°F - 464°F), Use With Heated Build Platform Is Recommended // Spool Diameter: 7.88" - Spool Width: 2.69" - Spool Hub Hole Diameter: 2.20" // Welcome to HATCHBOX 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 3.00mm diameter filament. Our filaments have a dimensional accuracy of +/- 0.05mm. ABS or Acrylonitrile Butadiene Styrene, is a tough and durable thermoplastic. It's ability to with stand higher temperatures, ABS is one of the most popular and commonly chosen material on the market. ABS can be used for full functional models, and is the closest material to real production models. The 3D printed object will have a glossy type finish. Why we love it: Prints at higher temperature, Tough and durable, Requires less manual finishing, Process in acetone for polished finish...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7HJPQ7X6]
    Precio:  $9,619.00

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7HJPQ7X6]

    -Titulo Original : Gizmo Dorks Glitter PLA 3D Printer Filament 3mm (2.85mm) 1kg, Gray-Fabricante : GIZMO DORKS-Descripcion Original: Glitter PLA nozzle temperature range 195 - 225 C; filament diameter of 2.85 mm +/- .03 mm // Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp // The uniquely designed clear spool is see through so you can see how much filament material is left and comes with a resealable containment bag to protect filament in between uses // Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Size:  |  Color: Glitter PLA adds a new dimension or sparkle to your print. The PLA glitter colors add a glimmer or twinkle throughout the print creating a unique look. There is a physical speckle dispersed throughout the filament to make your prints stand out. Gizmo Dorks Glitter PLA filament works with a wide range of common 3D printers. PLA (Polylactic Acid) is one of the most commonly used 3D printer material and for good reason. The widely used thermoplastic has a low melting temperature while also being virtually warp free. Glitter PLA does not have an odor like ABS and does not require a heated bed. Getting failed prints because of filament jams is a painful aspect of 3D printing. However, Gizmo Dorks Glitter PLA is specifically engineered to reduce jamming.Glitter PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. Glitter PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Glitter PLA enjoys sharper details and corners compared to ABS without the risk of cracking or warping. Glitter PLA can also be printed at higher throughput speeds...
  • Filamento Policarbonato 2.85mm 1kg COLOR FOTO1 IMP 3D 0LAJNS
    Precio:  $11,479.00

    Filamento Policarbonato 2.85mm 1kg COLOR FOTO1 IMP 3D 0LAJNS

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) PC Polycarbonate Filament 1kg / 2.2lbs for 3D Printers, Blue-Fabricante : GIZMO DORKS-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0MB384BG]
    Precio:  $7,819.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0MB384BG]

    -Titulo Original : 3D Solutech See Through Purple 3D Printer PLA Filament 1.75MM Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS (1.0KG) - 100% USA-Fabricante : 3D SOLUTECH-Descripcion Original: 1.75mm See Through Purple PLA filament // For common 3D printers such as MakerBot, Reprap, Afinia, UP, Mendel, flash forge, Sol doodle 2, Printrbot LC, Maker Gear M2 and etc. // Backed by our 100% SATISFACTION GUARANTEE // Temperature range is 190°C - 220°C // Color: Ultra smooth technology Our ultra smooth technology includes filaments capable of beautiful and smooth extraction to help build even the most delicate objects. Vacuum sealed We use vacuum-sealed packaging to isolate the moisturized environment and filament, and provide the best performance possible. High compatibility Our filaments have been tested on various 3d printer brands, receiving widespread and positive customer feedback. 3D Solutech is a professional filament manufacturer specializing in providing a wide range of colors and materials for 3d printing. Quality is always our top priority, and we check each spool, vacuum seal, and package by hand to ensure optimal product quality. Our filament is a proven winner, and maintains the smooth and consistent printing experience needed to achieve the best printing results. Our filament is always round, and contains no oily residue, air bubbles, kinks or breaks. Check out our store for the latest colors and materials for your 3d printer. Package includes: 1 x 1.75mm See Through Purple PLA filament (2.2LBS) 1 x Filament clip...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7VT7GMGB]
    Precio:  $7,879.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7VT7GMGB]

    -Titulo Original : 3D Solutech Natural Clear 3D Printer Premium PLA Filament 1.75MM Filament, 2.2 LBS (1.0KG)-Fabricante : 3D SOLUTECH-Descripcion Original: PRODUCES THE BEST 3D PRINTS: This 3D printing filament offers excellent dimensional accuracy with no more than 30 microns of diameter variance. This allows for better and more consistent feeding as well as higher quality 3D prints. You can get professional results right from your own 3D printing machines. // HIGHLY COMPATIBLE: We at 3D Solutech are proud to provide you with flexible PLA filament that is compatible with almost all 3D printers, including those from RepRap, MakerBot (such as the Replicator and Replicator 2), Ultimaker, Bits from Bytes, Airwolf 3D, MakerGear, Printrbot, Bukobot, Type A Machines, and many more. // HASSLE-FREE OPERATION: At 3D Solutech, we engineer our 3D printer filament and other materials to adhere to all regulations and standards of quality to ensure trouble-free operation and amazing results. We know that your 3D printer is an expensive investment. That’s why we offer our superior filament to match it rather than forcing you to settle for cheap alternatives. Your choice is clear! // MEETS ALL 3D PRINTING NEEDS: At 3D Solutech, our durable printing filament is highly versatile and can meet all of your 3D printing needs and applications. It comes in a variety of 3 different colors, including white, silver, hot pink, navy blue, and more. No wonder it’s the first choice of engineers and designers! // : Did you know that our PLA filament is stronger than alternative PLA filaments? It consists of polylactic acid and algae harvested from areas where it harms the environment in excess amounts. Additionally, it requires less energy to print because it requires a low printing temperature. // 3D printing is an emerging field, especially in the areas of design and engineering. Why not stay ahead of it and give life to your dreams with our quality filament at 3D Solutech? With us, you’ll find highly versatile filament to complete your printing kit that is compatible with nearly all 3D printers. At 3D Solutech, we know that you rely on your 3D printer to make your ideas a reality, and our filament is what helps you to do that. 3D Solutech was founded in 2012 with a goal of innovating 3D printing filaments. We have committed ourselves to providing the very finest filaments and color selections to help you carry out successful projects while having fun. We have faith in the future of this method of printing and love doing it ourselves and creating unique objects. We make sure that our products are always affordable to you and that everyone has the opportunity to create and sell on their own. With our 3D printer PLA filament, you’ll know you’re getting the best results. It offers high dimensional accuracy with no more than 30 microns of diameter variance. This allows for better and more consistent feeding as well as higher quality 3D prints, yielding professional results right from your own 3D printing machines. Our PLA printing filament is also stronger and better for the environment than competing 3D printing products. They require less energy to print because they have lower printing temperatures. Enjoy the hassle-free printing experience of quality filament by relying on 3D Solutech today...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7DLFKNQK]
    Precio:  $11,459.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7DLFKNQK]

    -Titulo Original : PrimaCreator EasyPrint 3D Printer Filament - PLA - 1.75mm - 1 kg (2.2 lbs) Spool - Green-Fabricante : PRIMACREATOR-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0ITZQRGY]
    Precio:  $9,309.00

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0ITZQRGY]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) PLA Filament 1kg / 2.2lb for 3D Printers, Pink Rose-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7Y5TCH9V]
    Precio:  $8,389.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7Y5TCH9V]

    -Titulo Original : SUNLU PETG 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75 mm, Grey-Fabricante : SUNLU-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 0.75kg COLOR FOTO-1 IMP 3D [0YXBNDHY]
    Precio:  $11,929.00

    Filamento PLA 1.75mm 0.75kg COLOR FOTO-1 IMP 3D [0YXBNDHY]

    -Titulo Original : Polymaker PLA (Polylactic Acid) PolyMax Spool, 1.75 Diameter, 750 g, 1.75 mm, White-Fabricante : POLYMAKER-Descripcion Original: Jam Free: Our patented Jam-Free technology dramatically improves the heat stability of our PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies // Extremely Tough : Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, PolyMax PLA is a sure winner when it comes to toughness // With PolyMax PLA you can get rid of that potentially hazardous ABS and still achieve the same structural strength with even more benefits such better printer compatibility // Easier printing, less warping, no hazardous odors, and in many cases even better mechanical properties //...
  • Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [74K5ZXWD]
    Precio:  $10,569.00

    Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [74K5ZXWD]

    -Titulo Original : SainSmart Emerald Flexible TPU 3D Printing Filament, 1.75 mm, 0.8 kg, Dimensional Accuracy +/- 0.05 mm-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market that accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, WanHao & Qidi, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // Color: Description: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby or prototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with0.8 kg/1.76 lb of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Specification: Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.8 kg Shore Hardness: 95 A Recommended Printer Settings Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Printing Tips For Bowden Drive Printers Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. What’s in The Package 1x SainSmart TPU Flexible Filament 1.75mm 0.8kg vacuum sealed w/ desiccan...
  • Filamento PLA 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74VRHL6Z]
    Precio:  $3,389.00

    Filamento PLA 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74VRHL6Z]

    -Titulo Original : Gizmo Dorks PLA Filament for 3D Printers 3mm (2.85mm) 200g, Transparent-Fabricante : GIZMO DORKS-Descripcion Original: PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant // Recommended Nozzle Temperature: 190 - 225 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more! // PLA filament is made from the highest quality virgin material. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 2.85mm +/- 0.03mmNet Weight: 200 gramsAvailable Colors in 200g Size: Black, Blue, Glow in the Dark, Green, Grey, Orange, Purple, Red, Transparent, and WhiteGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7TF93YYF]
    Precio:  $9,319.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7TF93YYF]

    -Titulo Original : PLA Filament 1.75mm, Geeetech 3D Printer PLA Filament,1.75mm,1kg per Spool,Orange-Fabricante : GEEETECH-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7ZNYCT7K]
    Precio:  $11,799.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7ZNYCT7K]

    -Titulo Original : AMOLEN PLA 3D Printer Filament, 1.75mm, Shining Glow in The Dark Green 1 kg Spool, Includes Sample Marble Filament-Fabricante : AMOLEN-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0IACCJG8]
    Precio:  $8,289.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0IACCJG8]

    -Titulo Original : Monoprice PLA 3D Printer Filament - Bright Orange - 1kg Spool, 1.75mm Thick | | For All PLA Compatible Printers-Fabricante : MONOPRICE-Descripcion Original: PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. // It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). // This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. // It has a nominal processing temperature of 210° C (410°F). // Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. // Size:  |  Color: Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot...
  • Filamento Abs 1.75mm 1kg Color Foto-1 Imp 3d [0mv7t3to]
    Precio:  $9,009.00

    Filamento Abs 1.75mm 1kg Color Foto-1 Imp 3d [0mv7t3to]

    -Titulo Original : eSUN 1.75mm White ABS 3D Printer Filament 1kg Spool (2.2lbs), White-Fabricante : ESUN-Descripcion Original: 1KG net (apximately 2.2 lbs) Filament with Clear Spool. 1.75mm diameter. // eSUN ABS 3D Printer Filament Vacuumed Sealed With Desiccant // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) // Recommended Extrusion/Nozzle Temperature 220C - 260C // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Extrusion Temperature Range: 220_ to 260_ The filaments are compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm._ ABS is a tough and durable thermoplastic which can withstand high temperature...
  • Filamento Biodegradable 1.75mm 1kg COLOR FOTO1 IMP 3D 7HFNVF
    Precio:  $8,169.00

    Filamento Biodegradable 1.75mm 1kg COLOR FOTO1 IMP 3D 7HFNVF

    -Titulo Original : Monoprice PLA Plus+ Premium 3D Filament - Magenta - 1kg Spool, 1.75mm Thick | Biodegradable | Same Strength As Standard ABS | For All PLA Compatible Printers-Fabricante : MONOPRICE-Descripcion Original: PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution. // This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. // It has a nominal processing temperature range of 205 ~ 225°C (401 ~ 437°F). // Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. // The negatives of using PLA Plus+ is that it is vulnerable to degradation from moisture, sunlight, and heat. // Color:  |  Size: Get outstanding 3D printing results when you use 1.75mm PLA Plus+ 3D Printer Filament from Monoprice! PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution. It does not require a heated base and has a very low shrinkage rate (0.3%). PLA Plus+ is stronger than ordinary PLA, possessing the same strength as normal ABS material. This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature range of 205 ~ 225°C (401 ~ 437°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA Plus+ is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot...
  • Filamento Acetal 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74W2HY9F]
    Precio:  $3,699.00

    Filamento Acetal 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74W2HY9F]

    -Titulo Original : Gizmo Dorks Acetal Delrin Filament for 3D Printers 3mm (2.85mm) 200g, White-Fabricante : GIZMO DORKS-Descripcion Original: Acetal 3D printer filament vacuumed sealed with desiccant has high stiffness combined with extremely low friction // Extrusion nozzle temperature: 210 - 225 C; Recommended to use a heated build platform // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more. // Polyoxymethylene (POM) filament is also known as Acetal or Polyacetal. It is a commonly used thermoplastic to engineer specific parts. Acetal filament has high stiffness, low friction, and excellent wear resistance. It has good elastic resilience and great dimensional stability. Because of it's low friction, POM is routinely used as gear wheels, ball bearings, etc.Extrusion Settings - The recommended print temperature is between 210 C - 225 C. Please note that acetal degrades when overheated and may give off small amounts of formaldehyde gas. Do not keep acetal heated above 230 C. Therefore, please always use in a well ventilated area or in a ventilation system.Print Bed - The hardest part to printing acetal filament is getting the first layer to adhere. POM filament does not typically adhere to conventional 3D print bed surfaces. Some users have found success with blue painters tape with hairspray on top (different blue tapes and hairspray brands have different results). However, POM filament prefers wood or cellulose based platforms. Thicker weight paper such as resume paper or sketch paper can be glued to borosilicate glass with Elmer's glue stick. A heated bed should be used to at least 100 - 110 C.Special Note - POM filament warps a lot. An enclosed chamber should be used to retain heat for better layer adhesion and reduce delamination issues. Please keep acetal away from moisture and always keep filament in an airtight container with a desiccant.Extrusion Temperature: 210 - 225 CHeated Bed: 110 CPrint speeds : 30mm/sDiameter: 2.85mm +/- 0.03mmNet Weight: 200 gramsAvailable Colors in 200g Size: Black and WhiteGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7Q3QRYX1]
    Precio:  $9,009.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7Q3QRYX1]

    -Titulo Original : SUNLU PLA Plus Filament 1.75mm 3D Printer 3D Pens 1KG PLA+ Filament +/- 0.02 mm Grey-Fabricante : EASY3D-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [1EKEMUEK]
    Precio:  $9,319.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [1EKEMUEK]

    -Titulo Original : eSUN 1.75mm Gray PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Gray-Fabricante : ESUN-Descripcion Original: 1KG net (approximately 2.2 lbs) Filament with Clear Spool // eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) // Recommended Extrusion/Nozzle Temperature 205C - 225C // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Color: Gray/Grey Extrusion Temperature Range: 205 to 225 Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem. Prints are hard to break. PLA PRO(PLA+) print temperature is about 20 Celsius higher than regular PLA. Most users print at around 210 to 215 Celsius. Other settings are about the same. INTSERVO is dedicated to customer satisfaction. Customers are always welcome to contact us for any questions and/or support needs...
Mostrar del 1 al 24 (de 588 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]