Arriba

Impresión > Impresión 3D > Filamentos

Mostrar: 
Mostrar del 1 al 24 (de 658 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Filamento PLA 1.75mm 0.5kg COLOR FOTO-1 IMP 3D [1BDL4FTQ]
    Precio:  $14,009.00

    Filamento PLA 1.75mm 0.5kg COLOR FOTO-1 IMP 3D [1BDL4FTQ]

    -Titulo Original : Proto-pasta HTP21705-SMK Translucent Silver Smoke HTPLA, 1.75mm 500g-Fabricante : PROTO-PASTA-Descripcion Original: Prints like standard PLA, but with better than petabs temperature resistance after annealing. Comes on fully corrugated recyclable spool with standard dimension // Silver Smoke is a translucent Smoke color similar to tint end Windows // We recommend printing this material at 190c-230c. No heated bed is required but may improve printing some geometry // Temperature resistance of up to 140C is achieved by annealing after printing in an oven at 60c-110c // Designed and manufactured in the USA with quality and as a top priorities. USA sourced packaging and labor // Size: Easy-printing PLA with better performance than ABS & PET! Proto-pasta's high-temp PLA v2. 0 is everything the original Kickstarter version should have been. This new formulation is higher performing, more obviously heat treatable, and lower cost. This tough PLA prints with ease, but has a potential heat deflection temperature () of as much as 140C (285F) depending on post-processing. This means parts retain more stiffness and form at higher temperatures (no warping on your sunny car dashboard). For maximum performance, your prints should be heat treated (I. e. crystallized) in an oven until you see a change from translucent to opaque. Yes, there is an obvious visual change indicating the improved performance! We had good luck in a lab oven at 110C (230F) for an hour or less. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass, ceramic, or composite), and letting them cool in the Oven to minimize distortion. Parts can be baked at a lower temperature (though must be above 60C for any change to occur) for a longer. These 500G spools are shipped on the industry's only fully recyclable corrugated paper spools with no metal or plastic parts. These extremely high quality spools are rigid, lightweight, attractive, and . They also have a larger than normal inner core improving printability of the last few layers of Material, especially on 2. 85mm diameters. The different designs on each spool are actual drawings, schematics, and Code from the equipment we manufacture your filament on. Enjoy! Contact Proto-pasta for more information...
  • Filamento PLA 3.0mm 1kg COLOR FOTO-1 IMP 3D [0T7N6AUU]
    Precio:  $10,809.00

    Filamento PLA 3.0mm 1kg COLOR FOTO-1 IMP 3D [0T7N6AUU]

    -Titulo Original : Gizmo Dorks 3 mm PLA Filament, 1 kg for 3D Printers, Opaque Red-Fabricante : GIZMO DORKS-Descripcion Original: 2.85 mm diameter, 1 kg net weight // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Print Temperature: 220 - 225°C // Heated Platform Not Required //...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [7BGXV6W5]
    Precio:  $7,309.00

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [7BGXV6W5]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Violet)-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market which accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, X Creality, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby orprototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 0.25 kg of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.25 kg Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 1x SainSmart TPU Flexible Filament 1.75mm 0.25kg vacuum sealed w/ desiccan...
  • Filamento PLA 1.75mm 5kg COLOR FOTO-1 IMP 3D [74WGMDGP]
    Precio:  $56,649.00

    Filamento PLA 1.75mm 5kg COLOR FOTO-1 IMP 3D [74WGMDGP]

    -Titulo Original : Gizmo Dorks PLA Filament for 3D Printers 1.75mm 5kg, Gray-Fabricante : GIZMO DORKS-Descripcion Original: PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant // Recommended Nozzle Temperature: 190 - 225 C // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 5kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25" // PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more! // PLA filament is made from the highest quality virgin material. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 1.75mm +/- 0.03mmNet Weight: 5 kilogramsAvailable Colors in 5kg Size: Black, Gray, WhiteGizmo Dorks has proudly released this filament with a net weight 5 kilograms. The larger amount of filament allows continuous prints without the need to swap out spools. It's perfect for larger builds...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7XBSKN4K]
    Precio:  $9,749.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7XBSKN4K]

    -Titulo Original : Flashforge PLA 1.75mm 3D Printer Filaments 1kg Spool-Dimensional Accuracy +/- 0.05mm for Finder and Creator Pro (Green)-Fabricante : FLASHFORGE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento CARBONO 1.75mm 0.8kg COLOR FOTO-1 IMP 3D -1IICFS4Y
    Precio:  $11,809.00

    Filamento CARBONO 1.75mm 0.8kg COLOR FOTO-1 IMP 3D -1IICFS4Y

    -Titulo Original : ZIRO 3D Printer Filament Carbon Fiber PLA 1.75mm 0.8KG Spool - Black-Fabricante : ZIRO-Descripcion Original: Suggest using a 4 mm or larger nozzle. Low print speed is recommended // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) // Suggest print temperature:210-230 // Vacuumed Sealed and free Bone bag for used filament. // 10Years ago, maybe you were worried about how to turn your ideas into reality, today,3D Print technology helps you to be a real maker. ZIRO 3D dedicated in providing high quality and brand new filaments to make your 3D printing different. Environment-friendly material. Strict production standard to guarantee high accuracy, Diameter tolerance:0.05mm Roundness tolerance:0.05mm. Vacuum sealed with desiccant for packing and bone bag for used filament. Compatible with most desktop 3D Printers(1.75mm materials). Enjoy the fun of 3D Printing with ZIRO 3D...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2EBXY]
    Precio:  $10,809.00

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2EBXY]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) PLA Filament 1kg / 2.2lb for 3D Printers, Black-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [6XRN75RM]
    Precio:  $11,899.00

    Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [6XRN75RM]

    -Titulo Original : SainSmart Pink Flexible TPU 3D Printing Filament, 1.75 mm, 0.8 kg, Dimensional Accuracy +/- 0.05 mm-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market that accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, WanHao & Qidi, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // Color: Description: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby or prototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with0.8 kg/1.76 lb of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Specification: Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.8 kg Shore Hardness: 95 A Recommended Printer Settings Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Printing Tips For Bowden Drive Printers Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. What’s in The Package 1x SainSmart TPU Flexible Filament 1.75mm 0.8kg vacuum sealed w/ desiccan...
  • Filamento PETG 2.85mm 1kg COLOR FOTO-1 IMP 3D [0LAJN4SA]
    Precio:  $10,449.00

    Filamento PETG 2.85mm 1kg COLOR FOTO-1 IMP 3D [0LAJN4SA]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) PETG Filament 1kg / 2.2lbs for 3D Printers, Transparent-Fabricante : GIZMO DORKS-Descripcion Original: Recommended Print Temperature: 230 - 260 C // PETG (Polyethylene Terepthalate Glycol-Modified) 3D printer filament vacuumed sealed with desiccant has high toughness with outstanding impact strength with little shrinkage compared to ABS // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, Creality, and many more. // Print Speed: 50 mm/s or less for best results //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7S37SW72]
    Precio:  $11,909.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7S37SW72]

    -Titulo Original : TTYT3D Silk Shine Purple 3D Printer PLA Filament, 1.75mm 3D Printing Material Widely Compatible, 1KG 2.2LBS Spool, with Extra Gift 10pcs FDM 3D Printer Nozzle Cleaning Needles-Fabricante : TTYT3D-Descripcion Original: Beautiful Shiny Purple Color: The Finished 3D Printed Item with Silk Glossy Smooth Appearance, Perfect for Arts, Crafts, DIY, Many Different 3D Print Projects // Premium Quality, Easy to Print: Widely Compatibility for FDM 3D Printers, 1.75mm High Diameter Tolerance, No Edge Warping, Consistent Feeding, Stable Print, No clogging, Eco-friendly, Ideal for Indoor Printing. // Printing Tips: Recommend Heat Bed 50-60°C, Recommend Printing Temperature: 220°C, To Avoid being Tangled, Insert Filament into Spool Holes to Fix after Every Time Use // Extra Gift & Package: Together With Small Gift 10pcs 0.4mm 3D Printer Nozzle Cleaning Needles,Vacuum Package with Zipper Bag, Net Weight 1KG/Spool // 100% Satisfy Warranty: Within 24 Hours Reply,100% Satisfaction Guarantee, If You're not Completely Satisfied for Any Reason, Contact us and We'll Help You to Sent it Back and Refunded //...
  • Filamento HIPS 1.75mm 5kg COLOR FOTO-1 IMP 3D [74WJQYD7]
    Precio:  $47,679.00

    Filamento HIPS 1.75mm 5kg COLOR FOTO-1 IMP 3D [74WJQYD7]

    -Titulo Original : Gizmo Dorks Hips Filament for 3D Printers 1.75mm 5kg, Black-Fabricante : GIZMO DORKS-Descripcion Original: HIPS (High Impact Polystyrene) 3D printer filament vacuumed sealed with desiccant // Extrusion nozzle temperature: 225 - 250 C; Recommended to use a heated build platform // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 5kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25" // HIPS filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more! // HIPS, High Impact Polystyrene, is very similar to ABS. They share a lot of the same characteristics and qualities. However, one of the biggest differences is the solvent used to dissolve HIPS. Limonene is used with HIPS instead of Acetone for ABS. Since limonene does not affect ABS, HIPS filament is commonly used as a supporting material. HIPS is versatile, economical, and impact resistant as well as a good alternative to ABS.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CDiameter: 1.75mm +/- 0.03mmNet Weight: 5 kilogramsAvailable Colors in 5kg Size: Black, Gray, WhiteGizmo Dorks has proudly released this filament with a net weight 5 kilograms. The larger amount of filament allows continuous prints without the need to swap out spools. It's perfect for larger builds...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [0VKSVMOY]
    Precio:  $9,749.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [0VKSVMOY]

    -Titulo Original : 3D Solutech Natural Clear 1.75mm PETG 3D Printer Filament 2.2 LBS (1.0KG) - PETG175CLR-Fabricante : 3D SOLUTECH-Descripcion Original: 1.75mm Natural Clear PETG filament // For common 3D printers such as MakerBot, RepRap, Afinia, UP, Mendel, flash forge, Sol doodle 2, Printout LC, Maker Gear M2 and etc // Backed by our 100% SATISFACTION GUARANTEE // Temperature range is 200°C - 220°C // Ultra smooth technology Our ultra smooth technology includes filaments capable of beautiful and smooth extraction to help build even the most delicate objects. Vacuum sealed We use vacuum-sealed packaging to isolate the moisturized environment and filament, and provide the best performance possible. High compatibility Our filaments have been tested on various 3d printer brands, receiving widespread and positive customer feedback. 3D Solutech is a professional filament manufacturer specializing in providing a wide range of colors and materials for 3d printing. Quality is always our top priority, and we check each spool, vacuum seal, and package by hand to ensure optimal product quality. Our filament is a proven winner, and maintains the smooth and consistent printing experience needed to achieve the best printing results. Our filament is always round, and contains no oily residue, air bubbles, kinks or breaks. Check out our store for the latest colors and materials for your 3d printer. Package includes: 1 x 1.75mm Natural Clear PETG Filament (2.2LBS) 1 x Filament clip...
  • Filamento PLA 1.75mm 0.5kg COLOR FOTO-1 IMP 3D [1BDL4DSY]
    Precio:  $15,559.00

    Filamento PLA 1.75mm 0.5kg COLOR FOTO-1 IMP 3D [1BDL4DSY]

    -Titulo Original : Proto-pasta HTP21705-CF High Temperature Carbon Fiber Spool, PLA 1.75 mm, 500 g, Black-Fabricante : PROTO-PASTA-Descripcion Original: Includes the benefits of carbon fiber with substantially increased temperature resistance when annealed. Comes on fully corrugated recyclable spool with standard dimension // Matte Black finish on prints that hides layer lines for more attractive Printed parts // Processing is comparable to standard PLA. No heated bed required. Process may be less consistent on smaller nozzles (&let; . 4mm) and/or Bowden Type machines // We recommend printing this material at 190c-230c using a 4 mm or larger nozzle. Please Note that this filament is more brittle than normal PLA and requires more careful handling to prevent breaking // Designed and manufactured in the USA with quality and customer service as a top priorities. Usa sourced packaging and labor // Color:  |  Size:  |  Style: Peg; proto-pasta's high Temp carbon fiber PLA (htpla-cf) combines engineering-grade performance with the ease and eco-friendliness of PLA printing. Compared to the original carbon fiber PLA, htpla-cf has improved toughness for less breaking when handling and much better high-temperature resistance when annealed. Like in the original carbon fiber PLA, the added carbon fiber increases stiffness and resistance to warpage. &let; /p htpla-cf, like aromatic coffee, is based on our high Temp PLA V2. 0, so it prints with ease and also has a potential heat deflection temperature (hdtv) in excess of 140C (285F) depending on processing. We had good results annealing (also called heat treating or crystallizing) in an Oven at 110C (225F) for an hour. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass, ceramic, or composite), and letting them cool in the Oven to minimize distortion. Parts must be baked above 60C for any crystallization to occur. carbon fiber is somewhat abrasive, so consider upgrading to a wear resistant nozzle for less regular maintenance. In our experience, good results were achieved using standard PLA parameters and standard build surface preparation (Blue tape or glue stick). no heated bed required. These 500G spools are shipped on the industry's only fully recyclable corrugated paper spools with no metal or plastic parts. These extremely high quality spools are rigid, lightweight, attractive, and . They also have a larger than normal inner core improving printability of the last few layers of Material, especially on 2. 85mm diameters. The different designs on each spool are actual drawings, schematics, and Code from the equipment we manufacture your filament on. Enjoy! contact Proto-pasta for more information...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0FG7BJLG]
    Precio:  $11,529.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0FG7BJLG]

    -Titulo Original : Gizmo Dorks 1.75mm PLA Filament 1kg / 2.2lb for 3D Printers, Glow in The Dark-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7NKZ49Q7]
    Precio:  $11,549.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7NKZ49Q7]

    -Titulo Original : eSUN Silk PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Blue-Fabricante : ESUN-Descripcion Original: Silk Like -- Gorgeous Silk Finish // eSUN Silk PLA 3D Printer Filament Vacuumed Sealed With Desiccant. // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) // Recommended Extrusion/Nozzle Temperature 190C - 220C // 1KG net (approximately 2.2 lbs) Silk PLA Filament with New Black Spool // Color: Color: Blue Extrusion Temperature Range: 190 Celsius to 220 Celsius Bed: 50 Celsius...
  • Filamento PETG 3.0mm 1kg COLOR FOTO-1 IMP 3D [781B2QNG]
    Precio:  $10,449.00

    Filamento PETG 3.0mm 1kg COLOR FOTO-1 IMP 3D [781B2QNG]

    -Titulo Original : Gizmo Dorks 3mm PETG Filament 1kg /2.2lbs for 3D Printers, Translucent Red-Fabricante : GIZMO DORKS-Descripcion Original: Recommended Print Temperature: 230 - 260 C // PETG (Polyethylene Terepthalate Glycol-Modified) 3D printer filament vacuumed sealed with desiccant has high toughness with outstanding impact strength with little shrinkage compared to ABS // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, Creality, and many more. // Print Speed: 50 mm/s or less for best results //...
  • Filamento Pla 1.75mm 1kg Color Foto-1 Imp 3d [7sm48vx5]
    Precio:  $10,829.00

    Filamento Pla 1.75mm 1kg Color Foto-1 Imp 3d [7sm48vx5]

    -Titulo Original : Hello3D Silk PLA Filament 1.75mm, OEM 3D Printer Filament Silk Filament, Silky Shiny Filament PLA For 3D Printers And Pens, 1KG (2.2Lbs) 1 Spool (Silk Gold)-Fabricante : HELLO3...
  • Filamento PLA 2.85mm 5kg COLOR FOTO-1 IMP 3D [74WLJ3MW]
    Precio:  $56,649.00

    Filamento PLA 2.85mm 5kg COLOR FOTO-1 IMP 3D [74WLJ3MW]

    -Titulo Original : Gizmo Dorks PLA Filament for 3D Printers 3mm (2.85mm) 5kg, White-Fabricante : GIZMO DORKS-Descripcion Original: PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant // Recommended Nozzle Temperature: 190 - 225 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 5kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25" // PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more! // PLA filament is made from the highest quality virgin material. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 2.85mm +/- 0.03mmNet Weight: 5 kilogramsAvailable Colors in 5kg Size: Black, Gray, WhiteGizmo Dorks has proudly released this filament with a net weight 5 kilograms. The larger amount of filament allows continuous prints without the need to swap out spools. It's perfect for larger builds...
  • Filamento Biodegradable 1.75mm 1kg COLOR FOTO1 IMP 3D 7HFQ2S
    Precio:  $9,959.00

    Filamento Biodegradable 1.75mm 1kg COLOR FOTO1 IMP 3D 7HFQ2S

    -Titulo Original : Monoprice PLA Plus+ Premium 3D Filament - Yellow - 1kg Spool, 1.75mm Thick | Biodegradable | Same Strength As Standard ABS | For All PLA Compatible Printers-Fabricante : MONOPRICE-Descripcion Original: PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution. // This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. // It has a nominal processing temperature range of 205 ~ 225°C (401 ~ 437°F). // Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. // The negatives of using PLA Plus+ is that it is vulnerable to degradation from moisture, sunlight, and heat. // Color:  |  Size: Get outstanding 3D printing results when you use 1.75mm PLA Plus+ 3D Printer Filament from Monoprice! PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution. It does not require a heated base and has a very low shrinkage rate (0.3%). PLA Plus+ is stronger than ordinary PLA, possessing the same strength as normal ABS material. This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature range of 205 ~ 225°C (401 ~ 437°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA Plus+ is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0FG7BUCY]
    Precio:  $10,809.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0FG7BUCY]

    -Titulo Original : Gizmo Dorks 1.75mm PLA Filament 1kg / 2.2lb for 3D Printers, Yellow-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [7VGVW546]
    Precio:  $11,549.00

    Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [7VGVW546]

    -Titulo Original : Overture TPU Filament 1.75mm Flexible TPU Roll with 200 x 200 mm Soft 3D Printer Consumables, 1kg Spool (2.2 lbs.), Dimensional Accuracy +/- 0.05 mm, 1 Pack (White)-Fabricante : OVERTURE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7FCC3TJG]
    Precio:  $9,639.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7FCC3TJG]

    -Titulo Original : Silk Green Bronze PLA Filament 1.75mm 3D Printer Filament 1KG (2.2LBS) Printing Materials Bronze Shine Silky Shiny Bronze Metallic Metal Look Silk Like CC3D Also Silk Gold Silver Copper-Fabricante : CC3D-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2E50I]
    Precio:  $10,809.00

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2E50I]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) PLA Filament 1kg / 2.2lb for 3D Printers, Gray-Fabricante : GIZMO DORKS-Descripcion Original: 2.85mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [1MT7O22L]
    Precio:  $9,209.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [1MT7O22L]

    -Titulo Original : PLA Filament 1.75mm, Geeetech 3D Printer PLA Filament,1.75mm,1kg per Spool,White-Fabricante : GEEETECH-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
Mostrar del 1 al 24 (de 658 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]