Arriba

Impresión > Impresión 3D > Filamentos

Mostrar: 
Mostrar del 1 al 24 (de 734 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Filamento PETG 2.85mm 1kg COLOR FOTO-1 IMP 3D [7SL8WTF3]
    Precio:  $8,329.00

    Filamento PETG 2.85mm 1kg COLOR FOTO-1 IMP 3D [7SL8WTF3]

    -Titulo Original : OVERTURE 2.85mm PETG Filament with 3D Build Surface 200mm × 200mm, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, 3D Printer Consumables Fit Most FDM Printer (Red)-Fabricante : OVERTURE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 0.5kg COLOR FOTO-1 IMP 3D [1BDL4FTQ]
    Precio:  $9,329.00

    Filamento PLA 1.75mm 0.5kg COLOR FOTO-1 IMP 3D [1BDL4FTQ]

    -Titulo Original : Proto-pasta HTP21705-SMK Translucent Silver Smoke HTPLA, 1.75mm 500g-Fabricante : PROTO-PASTA-Descripcion Original: Prints like standard PLA, but with better than petabs temperature resistance after annealing. Comes on fully corrugated recyclable spool with standard dimension // Silver Smoke is a translucent Smoke color similar to tint end Windows // We recommend printing this material at 190c-230c. No heated bed is required but may improve printing some geometry // Temperature resistance of up to 140C is achieved by annealing after printing in an oven at 60c-110c // Designed and manufactured in the USA with quality and as a top priorities. USA sourced packaging and labor // Size: Easy-printing PLA with better performance than ABS & PET! Proto-pasta's high-temp PLA v2. 0 is everything the original Kickstarter version should have been. This new formulation is higher performing, more obviously heat treatable, and lower cost. This tough PLA prints with ease, but has a potential heat deflection temperature () of as much as 140C (285F) depending on post-processing. This means parts retain more stiffness and form at higher temperatures (no warping on your sunny car dashboard). For maximum performance, your prints should be heat treated (I. e. crystallized) in an oven until you see a change from translucent to opaque. Yes, there is an obvious visual change indicating the improved performance! We had good luck in a lab oven at 110C (230F) for an hour or less. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass, ceramic, or composite), and letting them cool in the Oven to minimize distortion. Parts can be baked at a lower temperature (though must be above 60C for any change to occur) for a longer. These 500G spools are shipped on the industry's only fully recyclable corrugated paper spools with no metal or plastic parts. These extremely high quality spools are rigid, lightweight, attractive, and . They also have a larger than normal inner core improving printability of the last few layers of Material, especially on 2. 85mm diameters. The different designs on each spool are actual drawings, schematics, and Code from the equipment we manufacture your filament on. Enjoy! Contact Proto-pasta for more information...
  • Filamento Metal 3.0mm 1kg Color Foto-1 Imp 3d [16996g1m]
    Precio:  $8,069.00

    Filamento Metal 3.0mm 1kg Color Foto-1 Imp 3d [16996g1m]

    -Titulo Original : Gizmo Dorks 3mm Metal Bronze Filament, 1 kg for 3D Printers-Fabricante : GIZMO DORKS-Descripcion Original: Real bronze powder mixed with PLA // 3mm nominal (2.85mm true) diameter // 1 kg net weight // Filament Diameter: +/- 0.05mm // Print Temperature: 190 - 225°C // We provide the highest quality 3D printing materials such as ABS, PLA, HIPS, PVA, and more. Our filaments are run with tight tolerances. There are no air bubbles or oily residues. Every filament comes loaded on a durable, hard plastic spool, not a cheap, flimsy cardboard spool. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Unlike ABS, PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds. Now it is possible to print with metal filament from a desktop 3D printer. Bronze PLA is PLA plastic mixed and filled with real bronze. The resulting filament imparts the look and feel of bronze giving the printed part a sculpted bronze finish look. The finished part will look laser sintered. The filament prints just like normal PLA, so it is very easy to print and environmentally friendly. PLA comes in a variety of different vibrant colors. Some of the more exotic colors are the fluorescent series and color changing series. The fluorescent series glows under UV light, commonly known as black. The color changing filaments change colors at 31°C (88°F). The filament is one color below 31°C, and when it is heated above 31°C, the filament will change to another color...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [746F4CX8]
    Precio:  $6,819.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [746F4CX8]

    -Titulo Original : NOVAMAKER 3D Printer Filament - White 1.75mm PETG Filament, PETG 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm-Fabricante : NOVAMAKER-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [0ITZQP9S]
    Precio:  $7,059.00

    Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [0ITZQP9S]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) ABS Filament 1kg / 2.2lb for 3D Printers, Light Yellow-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7Q4RWNW6]
    Precio:  $8,579.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7Q4RWNW6]

    -Titulo Original : Eryone Silk Blue PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 mm, 1kg (2.2LBS) / Spool-Fabricante : ERYONE-Descripcion Original: Like silk, Highlight shiny silky smooth appearance. // PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant. // 1.75mm filament diameter (dimensional accuracy +/- 0.05mm). // 1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15" // Recommended Extrusion/Nozzle Temperature 190 - 230°C (374 - 435°F) // Color: Diameter: 1.75mm Tolerance: +/- 0.05 Print Temperature: 190 - 230°C (374 - 435°F) Recommended Print Speed: 30-60mm/...
  • Filamento Madera 1.75mm 1kg COLOR FOTO-1 IMP 3D [74DSD46L]
    Precio:  $8,829.00

    Filamento Madera 1.75mm 1kg COLOR FOTO-1 IMP 3D [74DSD46L]

    -Titulo Original : PRILINE 1kg Wood PLA Filament 1.75 3D Printer Filament(The Layer Should be Thicker Than 0.2mm and The Nozzle Should be Bigger Than 0.4mm)-Fabricante : PRILINE-Descripcion Original: Priline wood filament has wood powder in it // Size: 1.75mm (Tolerance Level : ± 0.03mm) - Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20" // Recommended Printing Temp/Nozzle Temperature: 200-230°C (392-446°F), Base Plate Temperature: 0-50°C(32-122°F) // No more durable nozzle need.But wood filament requires a .6 or larger nozzle to avoid clogging // Refund Guarantee in 30 Days: We trust our products. If you aren't happy with our 3D printer filament, tell us and We will arrange a refund for you // 1.PRILINE Wood Filament 1.75mm is light weight. Printed objects look like the wood, which can nail, drill and engrave. 2.Wood filament is widely used in health care, education, toys, building, automobile, electronics, anime field, etc. 1. 1 KG (2.20 lbs) Spool 2. 1.75mm Diameter (Dimensional Accuracy +/- 0.03mm) 3. Recommended Printing Temp/Nozzle Temperature:  200-230°C (392-446°F), Base Plate Temperature: 0-50°C(32-122°F) 4. Spool Diameter: 7.87 - Spool Width: 2.83 - Spool Hub Hole Diameter: 2.20 5. High Compatible with Your 3D Printer: For common all 1.75 mm specification 3D printers such as Ultimaker, Zortrax, Lulzbot, BCN3D , FlashForge, Makergear, MakerBot, Prusa, CEL, Robo. After each print, we recommended storing printer filament in a sealed plastic bag or box to prevent be affected with moisture...
  • Filamento Metal 1.75mm 1kg COLOR FOTO-1 IMP 3D [1CV49CZQ]
    Precio:  $8,069.00

    Filamento Metal 1.75mm 1kg COLOR FOTO-1 IMP 3D [1CV49CZQ]

    -Titulo Original : Gizmo Dorks 1.75mm Metal Copper Fill Filament, 1 kg for 3D Printers-Fabricante : GIZMO DORKS-Descripcion Original: Real copper powder mixed with PLA // Diameter: 1.75mm // Net weight: 1 kg // Diameter tolerance: +/- 0.05mm // Print Temperature: 190 - 225°C // Gizmo Dorks metal copper fill filament is a new filament that allows unique prints with a metallic look and finish. Metal copper filament is a unique blend made by combining real copper powder with PLA filament, and the filament prints very similar to normal PLA. The filament can be printed on either heated or non heated build plates. It's suggested to print on blue painters tape, and there is essentially no warping. If a heated build plate is used, then please set it to 60 C, and the print will have an increased adhesion to the platform. Metal copper fill can also be printed on regular glass, glass with glue stick, or kapton tape.Heat migration through the filament should be a very important consideration when using metal copper fill. Since the filament has real copper powder, heat will travel through the filament faster than normal. The copper filament will heat up in the hot end faster and cool down on the platform faster as well. Since it heats up faster, generally the hot end can be set to extrude at lower temperatures while allowing for faster print speeds. Normally, faster cooling when leaving the nozzle means means better performance on parts that overhang such as a chin or nose. Sometimes there are instances where heat migration through the filament is bad. For example, the heat might migrate up through the filament causing it to expand creating friction.Metal copper filled prints can be post processed. Start with using coarse steel wool to polish the surface. Remember this is just a polish and there is not that much pressure needed. Follow it up by applying a thin coat of black spray paint and immediately wiping it off with a cloth. This will leave the places that are harder to reach with a slight black tint giving it a beautiful contrast. Lastly, a copper polish can also be used to give a brighter shine and give some patina...
  • Filamento PLA 1.75mm 0.75kg COLOR FOTO-1 IMP 3D [1GDUS04S]
    Precio:  $11,449.00

    Filamento PLA 1.75mm 0.75kg COLOR FOTO-1 IMP 3D [1GDUS04S]

    -Titulo Original : Polymaker PolyMax PLA 3D Printer Filament, Jam-Free and 9 Times Stronger Than Regular PLA, 3D Printing Filament. PolyMax PLA (1.75, 750g) True Grey-Fabricante : POLYMAKER-Descripcion Original: ***THIS IS 3mm/2.85mm filament******Check and make sure you can print this size before purchasing to avoid unnecessary returns***. 1KG net (approximately 2.2 lbs) Filament with Clear Spool, Purple, Pantone 268C // eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. // 3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm). This is 3mm filament and actual diameter is 2.85mm +/- 0.05mm. This filament does not work with 1.75mm printers. Make sure your printer supports 2.85mm filament before purchasing to avoid unnecessary returns. // Recommended Extrusion/Nozzle Temperature 210C - 225C, about 20 Celsius higher than regular PLA. // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Color: Extrusion Temperature Range: 210 to 225 Celsius Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem....
  • Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [1LVWK4RB]
    Precio:  $9,339.00

    Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [1LVWK4RB]

    -Titulo Original : HATCHBOX TPU 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Shore 95A, Red-Fabricante : HATCHBOX-Descripcion Original: 1 KG (approximately 2.20 lbs.) Spool // Welcome to HATCHBOX 3D Products. Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D printers using 1.75mm diameter filaments, with a dimensional accuracy of +/- 0.03mm. HATCHBOX TPU filament is reshaping the industry with this elastic filament designed for more specialized prints – the possibilities really are endless! TPU, or Thermoplastic Polyurethane, has many every day uses due to its soft and malleable characteristics when heated, and its hardness and structural integrity when cooled. TPU is popular in almost every industry from medical instruments, automotive parts, sporting goods, and even protective cases for electronic devices. What do “Shore” and the Shore Measurement of 95A mean? Shore is one method of measuring hardness. On a Shore hardness scale, TPU’s can be categorized into A (flexible type) and D (rigid type). On both A and D scales, the range is from 0 (soft) to 100 (hard). Therefore, HATCHBOX’s Shore 95A grade denotes it to be a hard, highly resilient, and reliable material. Why we love it: Elasticity, strength, versatility, and abrasion resistance...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7KTZTGQM]
    Precio:  $7,069.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7KTZTGQM]

    -Titulo Original : Superfila PLA 3D Printer Filament for Creality 3D Printers and 3D Printing Pen, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Yellow-Fabricante : SUPERFILA-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [8393S4CR]
    Precio:  $9,569.00

    Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [8393S4CR]

    -Titulo Original : AMOLEN PLA 3D Printer Filament, 1.75mm, Set with Glow in The Dark Green, Marble, Silk Gold, Metal Copper, Each Spool 200g, 4 Spools Pack-Fabricante : AMOLEN-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7BN986CN]
    Precio:  $6,569.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7BN986CN]

    -Titulo Original : 3D Solutech Merlot Red 3D Printer PLA Filament 1.75MM Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS (1.0KG)-Fabricante : 3D SOLUTECH-Descripcion Original: 1.75Mm merlot Red pla filament // For common 3D printers such as makerbot, reprap, finial, up, mendel, flashforge, solidoodle 2, printrbot lc, makergear M2 and etc // Backed by our 100 percent satisfaction guarantee // Temperature range is 190°c - 220°c // Ultra smooth technology our ultra smooth technology includes filaments capable of beautiful and smooth Extraction to help build even the most delicate objects.Vacuum sealed we use vacuum-sealed packaging to isolate the moisturized environment and filament, and provide the best performance possible.High compatibility our filaments have been tested on various 3D printer brands, receiving widespread and positive customer feedback. 3D Solutech is a professional filament manufacturer specializing in providing a wide range of colors and materials for 3D printing. Quality is always our top priority, and we check each spool, vacuum seal, and package by hand to ensure optimal product quality. Our filament is a proven winner, and maintains the smooth and consistent printing experience needed to achieve the best printing results. Our filament is always round, and contains no oily residue, air bubbles, kink, use or breaks. Check out our store for the latest colors and materials for your 3D printer. Package includes: 1 x 1.75mm merlot Red PLA filament (2.2lbs) 1 x filament clip...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [82XWT6P1]
    Precio:  $13,869.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [82XWT6P1]

    -Titulo Original : OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer (Green + Red)-Fabricante : OVERTURE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUVA]
    Precio:  $8,609.00

    Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUVA]

    -Titulo Original : SainSmart Yellow Flexible TPU 3D Printing Filament, 1.75 mm, 0.8 kg, Dimensional Accuracy +/- 0.05 mm-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market that accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, WanHao & Qidi, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby or prototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 0.8 kg/1.76 lb of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.8 kg Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 1x SainSmart TPU Flexible Filament 1.75mm 0.8kg vacuum sealed w/ desiccan...
  • Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [0ITZQ494]
    Precio:  $7,059.00

    Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [0ITZQ494]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) ABS Filament 1kg / 2.2lb for 3D Printers, Fluorescent Green (UV Light)-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento Biodegradable 1.75mm 1kg COLOR FOTO1 IMP 3D 7HFNSL
    Precio:  $9,009.00

    Filamento Biodegradable 1.75mm 1kg COLOR FOTO1 IMP 3D 7HFNSL

    -Titulo Original : Monoprice PLA Plus+ Premium 3D Filament - Gray - 1kg Spool, 1.75mm Thick | Biodegradable | Same Strength As Standard ABS | For All PLA Compatible Printers-Fabricante : MONOPRICE-Descripcion Original: PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution. // This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. // It has a nominal processing temperature range of 205 ~ 225°C (401 ~ 437°F). // Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. // The negatives of using PLA Plus+ is that it is vulnerable to degradation from moisture, sunlight, and heat. // Color:  |  Size: Get outstanding 3D printing results when you use 1.75mm PLA Plus+ 3D Printer Filament from Monoprice! PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution. It does not require a heated base and has a very low shrinkage rate (0.3%). PLA Plus+ is stronger than ordinary PLA, possessing the same strength as normal ABS material. This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature range of 205 ~ 225°C (401 ~ 437°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA Plus+ is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot...
  • Filamento PETG 3.0mm 1kg COLOR FOTO-1 IMP 3D [78191FKG]
    Precio:  $7,309.00

    Filamento PETG 3.0mm 1kg COLOR FOTO-1 IMP 3D [78191FKG]

    -Titulo Original : Gizmo Dorks 3mm PETG Filament 1kg /2.2lbs for 3D Printers, Black-Fabricante : GIZMO DORKS-Descripcion Original: Recommended Print Temperature: 230 - 260 C // PETG (Polyethylene Terepthalate Glycol-Modified) 3D printer filament vacuumed sealed with desiccant has high toughness with outstanding impact strength with little shrinkage compared to ABS // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, Creality, and many more. // Print Speed: 50 mm/s or less for best results //...
  • Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [7VGVW546]
    Precio:  $9,089.00

    Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [7VGVW546]

    -Titulo Original : Overture TPU Filament 1.75mm Flexible TPU Roll with 200 x 200 mm Soft 3D Printer Consumables, 1kg Spool (2.2 lbs.), Dimensional Accuracy +/- 0.05 mm, 1 Pack (White)-Fabricante : OVERTURE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6Y6KYRHS]
    Precio:  $8,579.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6Y6KYRHS]

    -Titulo Original : TIANSE Gold PLA 3D Printer Filament, 1 kg Spool, 1.75 mm, Dimensional Accuracy +/- 0.03 mm-Fabricante : TIANSE-Descripcion Original: 1. 75mm Filament Diameter (Dimensional Accuracy +/- 0. 03mm) - Material: PLA - Weight: 2. 20 lbs Spool (Nearly 1247ft) // Finest Material: Raw material from USA. with good performance. Suit for most 3D printers and 3D pen (Prusa, Makerbot etc.. ) // Smooth Printing: Orderly wrapped, Melt well, Feed smoothly and constantly without clogging or bubble issue. Recommended Extrusion/Nozzle Temperature 190°C - 210°C (356°F - 410°F) // Spool Diameter: 7. 87" - Spool Width: 3. 78" - Spool Hub Hole Diameter: 2. 20" // 100% Satisfaction : 2-Year and 24*7 customer support with technical advice //...
  • Filamento PLA 2.85mm 5kg COLOR FOTO-1 IMP 3D [74WLJ3MW]
    Precio:  $39,629.00

    Filamento PLA 2.85mm 5kg COLOR FOTO-1 IMP 3D [74WLJ3MW]

    -Titulo Original : Gizmo Dorks PLA Filament for 3D Printers 3mm (2.85mm) 5kg, White-Fabricante : GIZMO DORKS-Descripcion Original: PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant // Recommended Nozzle Temperature: 190 - 225 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 5kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25" // PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more! // PLA filament is made from the highest quality virgin material. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 2.85mm +/- 0.03mmNet Weight: 5 kilogramsAvailable Colors in 5kg Size: Black, Gray, WhiteGizmo Dorks has proudly released this filament with a net weight 5 kilograms. The larger amount of filament allows continuous prints without the need to swap out spools. It's perfect for larger builds...
  • Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [7DJWJRP5]
    Precio:  $11,289.00

    Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [7DJWJRP5]

    -Titulo Original : UP Fila Premium ABS 3D Printer Filament, Low Odor, Consistent 1.75mm Diameter,1KG (500g×2 Spools), Treetop Green-Fabricante : TIERTIME-Descripcion Original: 1KG (500g×2 Spools), 1. 75mm filament diameter; // High impact strength, high temperature resistance, ideal for working parts and functional prototypes; // Low odor, consistent diameter; // Matt textured with many colors options, ready for painting and glueing, support acetone vapor polishing; // Vacuum sealed with desiccant, resealable ziplock bag included. // Color: UP Fila Premium ABS 3D Printer Filament has been researched and developed by Tiertime. This ABS has been specially formulated to offer lower warping characteristics and easier support structure removal compared to conventional ABS. UP Fila Premium ABS has been engineered to work with UP 3D Printers by Tiertime. We have extensively tested this material which also performs excellently on other ABS compatible 3d printers. Now available in a large selection of colours, UP Fila Premium ABS is high quality no fuss reliable filament with a matt luster and outstanding finish...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2E9TA]
    Precio:  $7,309.00

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2E9TA]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) PLA Filament 1kg / 2.2lb for 3D Printers, Silver-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7PDV9RC8]
    Precio:  $8,079.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7PDV9RC8]

    -Titulo Original : OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer, White-Fabricante : OVERTURE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
Mostrar del 1 al 24 (de 734 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]