Arriba

Impresión > Impresión 3D > Filamentos

Mostrar: 
Mostrar del 1 al 24 (de 658 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7BPV5FT2]
    Precio:  $9,409.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7BPV5FT2]

    -Titulo Original : Zi-Rui 3D Printer Filament,Marble Color PLA 1.75mm,Dimensional Accuracy+/- 0.03mm,1KG(2.2lbs)-Fabricante : ZI-RUI-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PETG 2.85mm 1kg COLOR FOTO-1 IMP 3D [0PQD7LRQ]
    Precio:  $10,809.00

    Filamento PETG 2.85mm 1kg COLOR FOTO-1 IMP 3D [0PQD7LRQ]

    -Titulo Original : eSUN 3D 3mm PETG Natural Filament 1kg (2.2lb), PETG 3D Printer Filament, Actual Diameter 2.85mm +/- 0.05mm, Semi-Transparent Natural-Fabricante : ESUN-Descripcion Original: 1KG net (approximately 2.2 lbs) Filament with Clear Spool; 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm) // eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant // 3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm) // Recommended Extrusion/Nozzle Temperature 230C - 250C // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Extrusion Temperature Range: 230 Celsius to 250 Celsius Plate temperature: 80~90 Celsius Printing speed: 30~60mm/s Moving speed: 30~60mm/s PETG is an excellent material which combines the advantages of both PLA and ABS. Odorless; Little shrinkage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish...
  • Filamento PETG 2.85mm 1kg COLOR FOTO-1 IMP 3D [7DRR8X5Y]
    Precio:  $12,089.00

    Filamento PETG 2.85mm 1kg COLOR FOTO-1 IMP 3D [7DRR8X5Y]

    -Titulo Original : PrimaCreator EasyPrint 3D Printer Filament - PETG - 2.85mm - 1 kg (2.2 lbs) - Transparent Green-Fabricante : PRIMACREATOR-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PETG 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [74W4RVVH]
    Precio:  $3,909.00

    Filamento PETG 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [74W4RVVH]

    -Titulo Original : Gizmo Dorks PETG Filament for 3D Printers 1.75mm 200g, White-Fabricante : GIZMO DORKS-Descripcion Original: PETG (Polyethylene Terepthalate Glycol-Modified) 3D printer filament vacuumed sealed with desiccant has high toughness with outstanding impact strength with little shrinkage compared to ABS // Extrusion nozzle temperature: 230 - 260 C // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more. // The Gizmo Dorks PETG filament is an updated cousin to PET (Polyethylene terephthalate) filament with enhanced properties. PETG has minimal shrinkage and warping. The filament has easy adhesion, so it can be printed on acrylic, glass, polyimide (Kapton) tape, blue tape, and other surfaces. PETG filament has a good combination of strength and flexibility, which is why it is used in latches and mechanical parts for snap fits . The filament is transparent with a glossy finish. It has chemical resistant properties, especially good acidic and alkalic resistance. Large prints tend to have less issues as well due to PETG having a shrink rate of less than 0.004 in/in. Printing Tips: Print speeds should be 50 mm/s or less. The slower the print speed, the more transparent the print will be.Extrusion temperature: 230°- 260°CHeated Bed Temperature: 80°CPrint Speed: 50mm/s or lessDiameter: 1.75mm +/- 0.03mmNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7XBSKN4K]
    Precio:  $9,499.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7XBSKN4K]

    -Titulo Original : Flashforge PLA 1.75mm 3D Printer Filaments 1kg Spool-Dimensional Accuracy +/- 0.05mm for Finder and Creator Pro (Green)-Fabricante : FLASHFORGE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento CARBONO 1.75mm 0.5kg COLOR FOTO-1 IMP 3D -1BDL4BNG
    Precio:  $10,549.00

    Filamento CARBONO 1.75mm 0.5kg COLOR FOTO-1 IMP 3D -1BDL4BNG

    -Titulo Original : Proto-pasta CFP11705 The Original Carbon Fiber Spool , PLA 1.75 mm, 500 g , Black-Fabricante : PROTO-PASTA-Descripcion Original: Stiffer than PLA with better Dimensional stability for warp-free printing, excellent layer adhesion, and easy support removal. Comes on fully corrugated recyclable spool with standard dimension // Matte Black finish on prints that hides layer lines for more attractive Printed parts // Processing is comparable to standard PLA. No heated bed required. Process may be less consistent on smaller nozzles (< . 4mm) and/or bowden Type machines // We recommend printing this material at 190c-230c using a 4 mm or larger nozzle. Please Note that this filament is more brittle than normal PLA and requires more careful handling to prevent breaking // Designed and manufactured in the USA with quality and customer service as a top priorities. Usa sourced packaging and labor // p> The original is still the best! world's first carbon fiber PLA was kick started by protoplant more than 2 years ago. Others try, but can't match the quality and ease of printing experience afforded by this product. Now available at a cost low enough for everyday printing. proto-pasta carbon fiber PLA is based on our easy printing, high quality PLA. Made from the highest quality, dry ingredients and extruded with care in our Washington facility on our own purpose-built extrusion systems. prints are demonstrably more rigid with easy processing (often using standard PLA settings) and support removal. Excellent layer adhesion and minimal warpage even without a heated bed make this a great everyday exotic for accurate parts. Layer lines disappear with the beautiful matte Black finish. Also has a slight sheen due to the embedded carbon making it very photogenic! These 500G spools are shipped on the industry's only fully recyclable corrugated paper spools with no metal or plastic parts. These extremely high quality spools are rigid, lightweight, attractive, and . They also have a larger than normal inner core improving printability of the last few layers of Material, especially on 2. 85mm diameters. The different designs on each spool are actual drawings, schematics, and Code from the equipment we manufacture your filament on. Enjoy! contact Proto-pasta for more information...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [1LMDFYCM]
    Precio:  $9,829.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [1LMDFYCM]

    -Titulo Original : eSUN 3D 1.75mm Solid Gray PETG 3D Printer Filament 1KG Spool (2.2lbs), 1.75mm Solid Opaque Gray-Fabricante : ESUN-Descripcion Original: 1KG net (approximately 2.2 lbs) Filament with Clear Spool // eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) // Recommended Extrusion/Nozzle Temperature 240C - 255C // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Extrusion Temperature Range: 240 to 255 Celsius Plate temperature: 80~90 Celsius or without heated Printing speed: 30~60mm/s Moving speed: 30~60mm/s 10 Solid/Opaque Colors(Solid Black, Solid White , Solid Red, Solid Silver, Solid Gold, Solid Gray, Solid Blue, Solid Green, Solid Purple, Solid Yellow) and 6 Semi-translucent Colors(Blue, Magenta, Green, Orange, Yellow, Natural). PETG is an excellent material which combines the advantages of other filaments. Odorless; Little shrinkage rate; hydrophobicity (Does not absorb water); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish; There are a lot of eSUN PETG clients and experience sharing since it was released in 2014. Ask ESUN/INTSERVO if you need help dial it in. PETG requires slower printing speed than other materials...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [78JCCFK8]
    Precio:  $6,639.00

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [78JCCFK8]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Purple)-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market which accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, X Creality, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby orprototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 0.25 kg of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.25 kg Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 1x SainSmart TPU Flexible Filament 1.75mm 0.25kg vacuum sealed w/ desiccan...
  • Filamento PLA 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74VXXLX3]
    Precio:  $3,579.00

    Filamento PLA 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74VXXLX3]

    -Titulo Original : Gizmo Dorks PLA Filament for 3D Printers 3mm (2.85mm) 200g, Red-Fabricante : GIZMO DORKS-Descripcion Original: PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant // Recommended Nozzle Temperature: 190 - 225 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more! // PLA filament is made from the highest quality virgin material. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 2.85mm +/- 0.03mmNet Weight: 200 gramsAvailable Colors in 200g Size: Black, Blue, Glow in the Dark, Green, Grey, Orange, Purple, Red, Transparent, and WhiteGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento TPU 3.0mm 1kg COLOR FOTO-1 IMP 3D [7S6TDVKH]
    Precio:  $12,769.00

    Filamento TPU 3.0mm 1kg COLOR FOTO-1 IMP 3D [7S6TDVKH]

    -Titulo Original : SainSmart 3mm TPU 3D Printing Filament, 1.0 kg, White-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with printers on the market that accept 3 mm filament. Including Lutzbot, Ultimaker 3D printers. With bowden extruder needs to print slowly, excellent adhesion on heat bed, not neccessary for extra adhesion like tape. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament's tendency to not warp. // Resist to oil, grease and etc. Duarable performance even in chemical harsh environment. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby orprototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 1.0 kg of material. This filament is drawn out to a diameter of 3 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 3 mm Material: Flexible TPU Net Weight: 1.0 kg Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 1 x SainSmart TPU Flexible Filament 3mm 1.0kg vacuum sealed w/ desiccan...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6ZYMHCHZ]
    Precio:  $10,159.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6ZYMHCHZ]

    -Titulo Original : NOVAMAKER 3D Printer Filament - Red 1.75mm PLA Filament, PLA 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm-Fabricante : NOVAMAKER-Descripcion Original: 1 kg (2.20 lbs) PLA Filament Vacuumed Sealed With Desiccant // 1.75mm Diameter (Dimensional Accuracy +/- 0.03mm), The temperature range for this Filament Refills is 220-250 °C (428°F-482°F), Best temperature 235°C(455°F). // Printing temperature: 190-220 °C (374°F-428°F), Best temperature 195°C(385°F) // No Bubble and Block Nozzle, Nood Stick Hot Bed, A Smooth PLA Used // Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A // Color: Diameter :  Tolerance Level :  Print Temperature :  Print Speed :  Base Plate Temperature :  Bubble :  Length :  Spool Diameter: -Spool Width: Spool Hub Hole Diameter: NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! The PLA 3D printer filaments are backed by NovaMaker . Seize the chance to click button right now...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ZAUQZTA]
    Precio:  $9,829.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ZAUQZTA]

    -Titulo Original : eSUN 3D 1.75mm PETG Black Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque Black-Fabricante : ESUN-Descripcion Original: 1KG net (approximately 2.2 lbs) Filament with Clear Spool // eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) // Recommended Extrusion/Nozzle Temperature 240C - 255C // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Extrusion Temperature Range: 240 to 255 Celsius Plate temperature: 80~90 Celsius or without heated Printing speed: 30~60mm/s Moving speed: 30~60mm/s 10 Solid/Opaque Colors(Solid Black, Solid White , Solid Red, Solid Silver, Solid Gold, Solid Gray, Solid Blue, Solid Green, Solid Purple, Solid Yellow) and 6 Semi-translucent Colors(Blue, Magenta, Green, Orange, Yellow, Natural). PETG is an excellent material which combines the advantages of other filaments. Odorless; Little shrinkage rate; hydrophobicity (Does not absorb water); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish; There are a lot of eSUN PETG clients and experience sharing since it was released in 2014. Ask ESUN/INTSERVO if you need help dial it in. PETG requires slower printing speed than other materials...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [1NCRVSF6]
    Precio:  $10,809.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [1NCRVSF6]

    -Titulo Original : TIANSE White PLA 3D Printer Filament, 1.75mm Diameter Tolerance +/- 0.03 mm, 2.2lb Spool, Capable for Lithophane Printing-Fabricante : TIANSE-Descripcion Original: 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) - Material: PLA - Weight: 2.20 lbs Spool (Nearly 1247ft) // Finest Material: Raw material from USA.Eco-friendly with good performance.Suit for most 3D printers and 3D pen (Prusa, Makerbot ect.),Great for printing Lithophanes, T-Rex Skull or Skeleton, Mechanical Pieces and Prototypes, Printed and Painted Parts. // Smooth Printing: Orderly wrapped,Melt well,Feed smoothly and constantly without clogging or bubble issue.Recommended Extrusion/Nozzle Temperature 180°C - 220°C // Spool Diameter: 7.87" - Spool Width: 3.78" - Spool Hub Hole Diameter: 2.20" // New packaging box: We've upgraded our packaging box. Due to product batches, you will receive our TIANSE 3D filament in New or Old packaging box at random. Please understand! //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [75ZHWFHL]
    Precio:  $11,139.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [75ZHWFHL]

    -Titulo Original : eSUN 1.75mm PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Luminous Green-Fabricante : ESUN-Descripcion Original: 1KG net (approximately 2.2 lbs) Filament with Clear Spool // eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) // Recommended Extrusion/Nozzle Temperature 205C - 225C. All-metal hotend required. Luminous compound is abrasive. // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Color: Luminous Green Glow in the Dark Extrusion Temperature Range: 205 to 225 WARNING: Luminous compound is abrasive to hotend. Always use all-metal hotend. Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem. Prints are hard to break. PLA PRO(PLA+) print temperature is about 20 Celsius higher than regular PLA. Most users print at around 210 to 215 Celsius. Other settings are about the same. INTSERVO is dedicated to customer satisfaction. Customers are always welcome to contact us for any questions and/or support needs...
  • Filamento PLA 1.75mm 0.5kg COLOR FOTO-1 IMP 3D [7P7HVL78]
    Precio:  $14,349.00

    Filamento PLA 1.75mm 0.5kg COLOR FOTO-1 IMP 3D [7P7HVL78]

    -Titulo Original : MIKA3D 3D Printer PLA Filament Bundle Shiny Silk Emerald Green Pearl White Purple - 1.75mm 3D Printing Material Each Spool 0.5kg Total 3 Spools 1.5kgs Pack-Fabricante : MIKA3D-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PETG 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74VMPCHL]
    Precio:  $3,909.00

    Filamento PETG 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74VMPCHL]

    -Titulo Original : Gizmo Dorks PETG Filament for 3D Printers 3mm (2.85mm) 200g, White-Fabricante : GIZMO DORKS-Descripcion Original: PETG (Polyethylene Terepthalate Glycol-Modified) 3D printer filament vacuumed sealed with desiccant has high toughness with outstanding impact strength with little shrinkage compared to ABS // Extrusion nozzle temperature: 230 - 260 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more. // The Gizmo Dorks PETG filament is an updated cousin to PET (Polyethylene terephthalate) filament with enhanced properties. PETG has minimal shrinkage and warping. The filament has easy adhesion, so it can be printed on acrylic, glass, polyimide (Kapton) tape, blue tape, and other surfaces. PETG filament has a good combination of strength and flexibility, which is why it is used in latches and mechanical parts for snap fits . The filament is transparent with a glossy finish. It has chemical resistant properties, especially good acidic and alkalic resistance. Large prints tend to have less issues as well due to PETG having a shrink rate of less than 0.004 in/in. Printing Tips: Print speeds should be 50 mm/s or less. The slower the print speed, the more transparent the print will be.Extrusion temperature: 230°- 260°CHeated Bed Temperature: 80°CPrint Speed: 50mm/s or lessDiameter: 2.85mm +/- 0.03mmNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [17N7D21G]
    Precio:  $14,659.00

    Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [17N7D21G]

    -Titulo Original : UP Fila Premium ABS 3D Printer Filament, Low Odor, Consistent 1.75mm Diameter,1KG (500g×2 Spools), Yellow-Fabricante : TIERTIME-Descripcion Original: 1KG (500g×2 Spools), 1. 75mm filament diameter; // High impact strength, high temperature resistance, ideal for working parts and functional prototypes; // Low odor, consistent diameter; // Matt textured with many colors options, ready for painting and gluing, support acetone vapor polishing; // Vacuum sealed with desiccant, resalable zip lock bag included. // Color: UP Fila Premium ABS 3D Printer Filament has been researched and developed by Tier time. This ABS has been specially formulated to offer lower warping characteristics and easier support structure removal compared to conventional ABS. UP Fila Premium ABS has been engineered to work with UP 3D Printers by Tier time. We have extensively tested this material which also performs excellently on other ABS compatible 3d printers. Now available in a large selection of colors, UP Fila Premium ABS is high quality no fuss reliable filament with a matt luster and outstanding finish...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7983PYHT]
    Precio:  $10,119.00

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7983PYHT]

    -Titulo Original : eSUN 3mm Fire Engine Red PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Actual Diameter 2.85mm +/- 0.05mm, Fire Engine Red, (Pantone 199C)-Fabricante : ESUN-Descripcion Original: 3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm). This is 3mm filament and actual diameter is 2.85mm +/- 0.05mm. This filament does not work with 1.75mm printers. Make sure your printer supports 2.85mm filament before purchasing to avoid wasting of shipping.. // eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. // 1KG net (apximately 2.2 lbs) Filament with Clear Spool, Fire Engine Red, Pantone 199C // Recommended Extrusion/Nozzle Temperature 210C - 225C, about 20 Celsius higher than regular PLA. // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Size: 3mm nominal, 2.85 +/-0.05mm actual Color: Fire Engine Red, Pantone 199C. We have several different mix of red filaments, please refer the pictures or pantone code and pick the one you prefer. Extrusion Temperature Range: 210 to 225 Celsius Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem. PLA PRO prints about 20 Celsius higher than regular PLA and produces strong products...
  • Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [7HR2BSHL]
    Precio:  $9,489.00

    Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [7HR2BSHL]

    -Titulo Original : Gizmo Dorks Low Odor ABS 3D Printer Filament 3mm (2.85mm) 1kg, Red-Fabricante : GIZMO DORKS-Descripcion Original: Uniquely formulated to be virtually smell free while 3D printing // Low odor ABS prints are high in strength and durability while providing for maximum impact resistance. // 200 gram net weight is the perfect sample size to try out filament // Nozzle temperature range 225 - 250 C; filament diameter of 2.85 mm +/- .03 mm // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Size:  |  Color: Gizmo Dorks is now pleased to introduce low odor ABS that eliminates the nasty foul smell emitted during 3D printing. For all of the great mechanical characteristics of ABS, it is known to give off a pungent smell during extrusion. Low odor ABS now gives you all of the wonderful ABS attributes while eliminating the smelly fumes.ABS plastic has always been a great thermoplastic to use in manufacturing and 3D printing for various reasons such as strength and durability. It's why so many commonly used products are made using ABS such as Legos. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with increased flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined. Being one of the most widely used filaments in 3D printing, ABS extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed chamber.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CNet weight: 1 k...
  • Filamento PLA 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74W7MZLF]
    Precio:  $3,579.00

    Filamento PLA 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74W7MZLF]

    -Titulo Original : Gizmo Dorks PLA Filament for 3D Printers 3mm (2.85mm) 200g, Orange-Fabricante : GIZMO DORKS-Descripcion Original: PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant // Recommended Nozzle Temperature: 190 - 225 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more! // PLA filament is made from the highest quality virgin material. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 2.85mm +/- 0.03mmNet Weight: 200 gramsAvailable Colors in 200g Size: Black, Blue, Glow in the Dark, Green, Grey, Orange, Purple, Red, Transparent, and WhiteGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [7VGVW546]
    Precio:  $10,159.00

    Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [7VGVW546]

    -Titulo Original : Overture TPU Filament 1.75mm Flexible TPU Roll with 200 x 200 mm Soft 3D Printer Consumables, 1kg Spool (2.2 lbs.), Dimensional Accuracy +/- 0.05 mm, 1 Pack (White)-Fabricante : OVERTURE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 0.5kg COLOR FOTO-1 IMP 3D [7JW1JCXR]
    Precio:  $10,549.00

    Filamento PLA 1.75mm 0.5kg COLOR FOTO-1 IMP 3D [7JW1JCXR]

    -Titulo Original : Proto-pasta Blue Wonder Glitter HTPLA, 1.75mm 500g-Fabricante : PROTO-PASTA-Descripcion Original: Large, sparkly flecks for maximum texture and fun without post-processing. // Color:  |  Style: Sometimes you want a professional matte finish and sometimes you just want some shine! Take gloss to another level with Glitter Flake HTPLA.  Print with the ease of standard PLA with standard hardware and temperatures, but make fun, mesmerizing prints that stand out.  Celebrate good times with ornaments, disco balls, toys, and treasures.  If you want to make a print more fun, just add glitter.  Glitter Flake has little risk of clogging or wearing your nozzle, and it won't make a glitter mess, but beware, printing with glitter is sure to be addictive!  Glitter particles will lay flat with smaller layers, giving top/bottom surfaces more shine than sidewall, so have some fun playing with resolution to see how the result changes...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [79FPHY4J]
    Precio:  $9,759.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [79FPHY4J]

    -Titulo Original : 3D Solutech Real White 1.75mm PETG 3D Printer Filament 2.2 LBS (1.0KG)-Fabricante : 3D SOLUTECH-Descripcion Original: 1.75Mm real White petg filament // For common 3D printers such as makerbot, reprap, finial, up, mendel, flashforge, solidoodle 2, printrbot lc, makergear M2 and etc // Backed by our 100 percent satisfaction guarantee // Temperature range is 200°c - 220°c // Made in the usa // Color: Ultra smooth technology our ultra smooth technology includes filaments capable of beautiful and smooth Extraction to help build even the most delicate objects.Vacuum sealed we use vacuum-sealed packaging to isolate the moisturized environment and filament, and provide the best performance possible.High compatibility our filaments have been tested on various 3D printer brands, receiving widespread and positive customer feedback. 3D Solutech is a professional filament manufacturer specializing in providing a wide range of colors and materials for 3D printing. Quality is always our top priority, and we check each spool, vacuum seal, and package by hand to ensure optimal product quality. Our filament is a proven winner, and maintains the smooth and consistent printing experience needed to achieve the best printing results. Our filament is always round, and contains no oily residue, air bubbles, kink, use or breaks. Check out our store for the latest colors and materials for your 3D printer. Package includes: 1 x 1.75mm real White PETG filament (2.2lbs) 1 x filament clip...
  • Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [74K5ZXWD]
    Precio:  $10,399.00

    Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [74K5ZXWD]

    -Titulo Original : SainSmart Emerald Flexible TPU 3D Printing Filament, 1.75 mm, 0.8 kg, Dimensional Accuracy +/- 0.05 mm-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market that accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, WanHao & Qidi, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // Color: Description: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby or prototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with0.8 kg/1.76 lb of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Specification: Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.8 kg Shore Hardness: 95 A Recommended Printer Settings Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Printing Tips For Bowden Drive Printers Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. What’s in The Package 1x SainSmart TPU Flexible Filament 1.75mm 0.8kg vacuum sealed w/ desiccan...
Mostrar del 1 al 24 (de 658 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]