Arriba

Impresión > Impresión 3D > Filamentos

Mostrar: 
Mostrar del 1 al 24 (de 541 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [74DTLGPV]
    Precio:  $9,819.00

    Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [74DTLGPV]

    -Titulo Original : PRILINE TPU-1KG 1.75 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1kg Spool, 1.75 mm, Blue-Fabricante : PRILINE-Descripcion Original: Material: TPU Flexible (Thermoplastic Polyurethane) - Color: Blue - Weight: 1 KG (approximately 2.20 lbs) Spool // Size: 1.75mm (Tolerance Level : ± 0.03mm) - Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20" // Recommended Printing Temp/Nozzle Temperature: 190-210°C (374-410°F), Base Plate Temperature: 50°C(122°F) // Performance Advantages: PRILINE TPU Flexible filament is a material that is soft and elastic like rubber, similar to the Flexible TPE but typing easier and harder than TPE. It allows for repeated movement or impact without cracking // Refund Guarantee in 30 Days: We trust our products. If you aren’t happy with our 3D printer filament, tell us and We will arrange a refund for you // Color: 1. PRILINE TPU Flexible filament should be printed at lower speed than normal. And printing nozzle type Direct Drive (motor attached to the nozzle) due to its soft lines. 2. TPU Flexible filament applications include seals, plugs, gaskets, sheets, shoes, key ring case for mobile hands-bike parts shock and wear rubber seal (Wearable Device/Protective applications ). 1. 1 KG (approximately 2.20 lbs) Spool 2. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) 3. Recommended Printing Temp/Nozzle Temperature: 190-210°C (374-410°F), Base Plate Temperature: 50°C(122°F) 4. Spool Diameter: 7.87 - Spool Width: 2.83 - Spool Hub Hole Diameter: 2.20 5. High Compatible With Your 3D Printer: For common all 1.75 mm specification 3D printers such as Ultimaker, Zortrax, Lulzbot, BCN3D , FlashForge, Makergear, MakerBot, Prusa, CEL, Robo. After each print, we recommended storing printer filament in a sealed plastic bag or box to prevent be affected with moisture....
  • Filamento ABS 3.0mm 1kg COLOR FOTO-1 IMP 3D [0MVIQ6QG]
    Precio:  $8,929.00

    Filamento ABS 3.0mm 1kg COLOR FOTO-1 IMP 3D [0MVIQ6QG]

    -Titulo Original : eSUN 3mm White ABS 3D Printer Filament 1kg Spool (2.2lbs), White-Fabricante : ESUN-Descripcion Original: 1KG net (apximately 2.2 lbs) Filament with Clear Spool // eSUN ABS 3D Printer Filament Vacuumed Sealed With Desiccant // 3mm Filament Diameter (Actual diameter 2.85mm +/- 0.05mm) // Recommended Extrusion/Nozzle Temperature 220C - 260C // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Diameter: 3mm nominal, 2.85mm +/- 0.05mm actual. Note: Make sure your printer can print 3mm filament. Extrusion Temperature Range: 220 Celsius to 260 Celsius Bed Temp: 100 Celsius to 110 Celsius ABS Advantages: Lower warp than other ABS. Easy on acetone bath...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7V3RM5H4]
    Precio:  $8,889.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7V3RM5H4]

    -Titulo Original : RepRapper Silk PLA White 3D Printer Filament 1.75 mm 1kg Spool (2.2lbs) Perfectly Coiled in Ecofriendly Straw Based Spool-Fabricante : REPRAPPER-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento HIPS 1.75mm 5kg COLOR FOTO-1 IMP 3D [74WKF32P]
    Precio:  $39,299.00

    Filamento HIPS 1.75mm 5kg COLOR FOTO-1 IMP 3D [74WKF32P]

    -Titulo Original : Gizmo Dorks Hips Filament for 3D Printers 1.75mm 5kg, Gray-Fabricante : GIZMO DORKS-Descripcion Original: HIPS (High Impact Polystyrene) 3D printer filament vacuumed sealed with desiccant // Extrusion nozzle temperature: 225 - 250 C; Recommended to use a heated build platform // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 5kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25" // HIPS filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more! // HIPS, High Impact Polystyrene, is very similar to ABS. They share a lot of the same characteristics and qualities. However, one of the biggest differences is the solvent used to dissolve HIPS. Limonene is used with HIPS instead of Acetone for ABS. Since limonene does not affect ABS, HIPS filament is commonly used as a supporting material. HIPS is versatile, economical, and impact resistant as well as a good alternative to ABS.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CDiameter: 1.75mm +/- 0.03mmNet Weight: 5 kilogramsAvailable Colors in 5kg Size: Black, Gray, WhiteGizmo Dorks has proudly released this filament with a net weight 5 kilograms. The larger amount of filament allows continuous prints without the need to swap out spools. It's perfect for larger builds...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [1C9KT6SK]
    Precio:  $9,519.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [1C9KT6SK]

    -Titulo Original : WYZworks PLA 1.75mm [ Violet ] Premium Thermoplastic Polylactic Acid 3D Printer Filament - Dimensional Accuracy +/- 0.05mm 1kg / 2.2lb + [ Multiple Color Options Available ]-Fabricante : WYZWORKS-Descripcion Original: THERMOPLASTIC POLYLACTIC ACID [MSDS APPROVED] - With our ultra smooth technology, our filaments are capable to extrude beautifully and smoothly that help to build a more delicate object. Natural PLA Premium Quality MSDS Approved 3D Printer Filament. // HIGH SPECS - PLA [Polylactic Acid] 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) 1 KG (2.20 lbs) Spool 3D Printer Filament Vacuumed Sealed. Quality Black Filament With The Highest Dimensional Accuracy Means The Nozzle Won't Get Blocked. Don't Risk Damaging Your Expensive 3D Printer With Unvetted Filaments. // TEMPERATURE RECOMMENDATION - Recommended Printing Temperature range 170°C - 230°C - PLA allows higher print speed, more accurate placement of material with proper cooling (it does not shrink as much) and also thinner build heights because of less resistance from the plastic coming out the nozzle, where abs even at high temps (252C) is still sticky and has high viscosity. // CUSTOMER SUPPORT - Get The Absolute Best Filament & Support At Half The Cost Of Main Brand Filaments. Save Money Without Risking Your Equipment, Print Quality, & Time! // HIGH COMPATIBLE - For most common 3D printers such as ROBO 3D, Cubify, Leapfrog, MakerBot, Reprap, Afinia, UP, Mendel, flashforge, Solidoodle 2, Printrbot LC, MakerGear M2, Felix, Reprap, Ultimaker and any other 3D printers. // Color: Our are made from (raw white pellets). Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. Manufactured & thoroughly tested under strict guidelines to give the best results possible. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.? PLA, or Polylactic Acid, is a commonly used thermoplastic material that does not require the use of a heated print bed. Extruded with great precision, which means better looking prints, improves reliability plus less calibration plus fewer extruder failures. Comes vacuum-sealed with the desiccant on a 1kg (2.2lb) reel. Compatible with most 3D printers currently out on the market. If you aren't happy we will fix the issue right away no matter what. This is what we stand for and why after using our filament, you won't ever want to go back. Don't hesitate to reach out with any questions about 3D printer filament you have. We believe 3D printing will change the world and we are so happy to do our part by providing the best filament money can buy. PLA (Polylactic Acid) 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Net Weight: 1 KG (2.20 lbs) Spool 3D Printer Filament Vacuumed Sealed with Desiccant Recommended Printing Temperature range 170°C - 230°C Spool Diameter: 7 Spool Width: 3 Spool Hub Hole Diameter: 2.37 Package Includes: 1x 3D Filament roll with spool...
  • Filamento TPU 2.85mm 1kg COLOR FOTO-1 IMP 3D [7HR3K3NR]
    Precio:  $10,989.00

    Filamento TPU 2.85mm 1kg COLOR FOTO-1 IMP 3D [7HR3K3NR]

    -Titulo Original : Gizmo Dorks Flexible TPU 3D Printer Filament 3mm (2.85mm) 1kg, Yellow-Fabricante : GIZMO DORKS-Descripcion Original: 3D flexible filament is capable of producing very intricate parts // Can print prototypes or 3D parts that require the need to bend while still maintaining the original shape // TPU plastic is used in many everyday applications such as cell phone cases to medical devices // Flexible filament is made from TPU, thermoplastic polyurethane, with a shore hardness of 96A // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds //...
  • Filamento Termico 1.75mm 1kg COLOR FOTO-1 IMP 3D [7PYDNQXS]
    Precio:  $10,109.00

    Filamento Termico 1.75mm 1kg COLOR FOTO-1 IMP 3D [7PYDNQXS]

    -Titulo Original : 3D Printer Silk Rainbow Multicolor PLA Filamentt 1.75mm 1KG Multi Color Printing Materials Gradually Changing Color PLA Rainbow Mulitcolor Multicolored Metallic Color Gradient Filament CC3D-Fabricante : CC3D-Descripcion Original: No polishing needed, printing at a high detail results in a beautiful finish. // Highlight silk pla filament multicolored color. // Nice shiny Metallic Special Rainbow Multi Color Gradient // Industrial & Scientific > Additive Manufacturing Products > 3D Printing Supplies > 3D Printing Filament // The change from one color to another is random. // Color: Welcome CC3D store 3D Printer Silk Rainbow PLA Filament. Material:PLA Brand:CC3D Color:Silk Rainbow Diameter (Tolerance): 1.75 mm ±0.05 mm Net Weight: 1000g Recommended Printing Temp: 195 - 230°C Recommended Printing Speed: 30 - 60 mm/s Heated Bed: Not required but can be used (up to 60 °C) The dimensions of spool: Spool Diameter: 20cm Spool Width: 6.9cm Spool Hub Hole Diameter: 5.3cm Zhuopu new material store is committed to improve product quality and customer shopping experiences. If you have any questions, please contact us through the order page.We will help you to solve the problem until you are satisfied. Merry Christmas and Happy new year...
  • Filamento PLA 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74W68P3T]
    Precio:  $3,249.00

    Filamento PLA 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74W68P3T]

    -Titulo Original : Gizmo Dorks PLA Filament for 3D Printers 3mm (2.85mm) 200g, Grey-Fabricante : GIZMO DORKS-Descripcion Original: PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant // Recommended Nozzle Temperature: 190 - 225 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more! // PLA filament is made from the highest quality virgin material. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 2.85mm +/- 0.03mmNet Weight: 200 gramsAvailable Colors in 200g Size: Black, Blue, Glow in the Dark, Green, Grey, Orange, Purple, Red, Transparent, and WhiteGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7SM48VX5]
    Precio:  $8,339.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7SM48VX5]

    -Titulo Original : Hello3D Silk PLA Filament 1.75mm, OEM 3D Printer Filament Silk Filament, Silky Shiny Filament PLA for 3D Printers and Pens, 1KG (2.2Lbs) 1 Spool (Silk Gold)-Fabricante : HELLO3D-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7846LFNB]
    Precio:  $9,819.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7846LFNB]

    -Titulo Original : eSUN 1.75mm PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Fire Engine Red, (Pantone 199C)-Fabricante : ESUN-Descripcion Original: 1KG net (approximately 2.2 lbs) Filament with Clear Spool, Fire Engine Red, Pantone 199C // eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm); Fire Engine Red // Recommended Extrusion/Nozzle Temperature 205C - 225C. Most people print at 215 Celsius // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Color: Color: Fire Engine Red, Pantone 199C. We have several different mix of red filaments, please refer the pictures or pantone code and pick the one you prefer. Extrusion Temperature Range: 205 to 225 Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem. Prints are hard to break. PLA PRO(PLA+) print temperature is about 20 Celsius higher than regular PLA. Other settings are about the same. INTSERVO is dedicated to customer satisfaction. Customers are always welcome to contact us for any questions and/or support needs. We made this color based on customer requests. Your satisfaction is always our No.1 priority...
  • Filamento Biodegradable 1.75mm 1kg COLOR FOTO1 IMP 3D 7HFPMF
    Precio:  $11,149.00

    Filamento Biodegradable 1.75mm 1kg COLOR FOTO1 IMP 3D 7HFPMF

    -Titulo Original : Monoprice PLA Plus+ Premium 3D Filament - Gold - 1kg Spool, 1.75mm Thick | Biodegradable | Same Strength As Standard ABS | For All PLA Compatible Printers-Fabricante : MONOPRICE-Descripcion Original: PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution. // This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. // It has a nominal processing temperature range of 205 ~ 225°C (401 ~ 437°F). // Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. // The negatives of using PLA Plus+ is that it is vulnerable to degradation from moisture, sunlight, and heat. // Color:  |  Size: Get outstanding 3D printing results when you use 1.75mm PLA Plus+ 3D Printer Filament from Monoprice! PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution. It does not require a heated base and has a very low shrinkage rate (0.3%). PLA Plus+ is stronger than ordinary PLA, possessing the same strength as normal ABS material. This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature range of 205 ~ 225°C (401 ~ 437°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA Plus+ is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot...
  • Filamento Termico 2.85mm 1kg COLOR FOTO-1 IMP 3D [16996D8I]
    Precio:  $11,879.00

    Filamento Termico 2.85mm 1kg COLOR FOTO-1 IMP 3D [16996D8I]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) ABS Filament, 1 kg for 3D Printers, Color Change Blue to White-Fabricante : GIZMO DORKS-Descripcion Original: 3mm nominal (2.85mm true) diameter, 1 kg net weight // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Print Temperature: 230 - 240°C // Platform Temperature: 90 - 110°C //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7TMR5QVS]
    Precio:  $8,039.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7TMR5QVS]

    -Titulo Original : AVEE PLA 100-3D Printer Filament 1.75 mm - 1 KG / 2.2 lb. (Green)-Fabricante : AVEE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7DLD8174]
    Precio:  $10,449.00

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7DLD8174]

    -Titulo Original : PrimaCreator EasyPrint 3D Printer Filament - PLA - 2.85mm - 1 kg (2.2 lbs) Spool - Gold-Fabricante : PRIMACREATOR-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [0F9MKWK2]
    Precio:  $8,319.00

    Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [0F9MKWK2]

    -Titulo Original : Gizmo Dorks 1.75mm ABS Filament 1kg / 2.2lb for 3D Printers, Pink-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [82PC1T7Q]
    Precio:  $9,819.00

    Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [82PC1T7Q]

    -Titulo Original : PRILINE TPU-1KG 1.75 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1kg Spool,Cyan-Fabricante : PRILINE-Descripcion Original: Material: TPU Flexible (Thermoplastic Polyurethane) - Weight: 1 KG (approximately 2.20 lbs) Spool // Size: 1.75mm Spool Diameter: 7.87" Spool Width: 2.83" Spool Hub Hole Diameter: 2.20" // Recommended Printing Temp/Nozzle Temperature: 190-210°C (374-410°F), Base Plate Temperature: 50°C(122°F) // Performance Advantages: PRILINE TPU Flexible filament is a material that is soft and elastic like rubber, similar to the Flexible TPE but typing easier and harder than TPE. It allows for repeated movement or impact without cracking // Refund Guarantee in 30 Days: We trust our products. If you aren’t happy with our 3D printer filament, tell us and We will arrange a refund for you // Color: 1. PRILINE TPU Flexible filament should be printed at lower speed than normal. And printing nozzle type Direct Drive (motor attached to the nozzle) due to its soft lines. 2. TPU Flexible filament applications include seals, plugs, gaskets, sheets, shoes, key ring case for mobile hands-bike parts shock and wear rubber seal (Wearable Device/Protective applications ). 1. 1 KG (2.20 lbs) Spool 2. 1.75mm Diameter (Dimensional Accuracy +/- 0.03mm) 3. Recommended Printing Temp/Nozzle Temperature: 190-210°C (374-410°F), Base Plate Temperature: 50°C(122°F) 4. Spool Diameter: 7.87 - Spool Width: 2.83 - Spool Hub Hole Diameter: 2.20 5. High Compatible with Your 3D Printer: For common all 1.75 mm specification 3D printers such as Ultimaker, Zortrax, Lulzbot, BCN3D , FlashForge, Makergear, MakerBot, Prusa, CEL, Robo. After each print, we recommended storing printer filament in a sealed plastic bag or box to prevent be affected with moisture....
  • Filamento TPU 3.0mm 1kg COLOR FOTO-1 IMP 3D [7BK4GQKM]
    Precio:  $11,599.00

    Filamento TPU 3.0mm 1kg COLOR FOTO-1 IMP 3D [7BK4GQKM]

    -Titulo Original : SainSmart 3mm TPU 3D Printing Filament, 1.0 kg, Red-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with printers on the market that accept 3 mm filament. Including Lutzbot, Ultimaker 3D printers. With bowden extruder needs to print slowly, excellent adhesion on heat bed, not neccessary for extra adhesion like tape. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament's tendency to not warp. // Resist to oil, grease and etc. Duarable performance even in chemical harsh environment. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby orprototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 1.0 kg of material. This filament is drawn out to a diameter of 3mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 3 mm Material: Flexible TPU Net Weight: 1.0 kg Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 1 x SainSmart TPU Flexible Filament 3mm 1.0kg vacuum sealed w/ desiccan...
  • Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [17N7D0EK]
    Precio:  $13,309.00

    Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [17N7D0EK]

    -Titulo Original : UP Fila Premium ABS 3D Printer Filament, Low Odor, Consistent 1.75mm Diameter,1KG (500g×2 Spools), Blue-Fabricante : TIERTIME-Descripcion Original: 1KG (500g×2 Spools), 1. 75mm filament diameter; // High impact strength, high temperature resistance, ideal for working parts and functional prototypes; // Low odor, consistent diameter; // Matt textured with many colors options, ready for painting and gluing, support acetone vapor polishing; // Vacuum sealed with desiccant, resalable zip lock bag included. // Color: UP Fila Premium ABS 3D Printer Filament has been researched and developed by Tier time. This ABS has been specially formulated to offer lower warping characteristics and easier support structure removal compared to conventional ABS. UP Fila Premium ABS has been engineered to work with UP 3D Printers by Tier time. We have extensively tested this material which also performs excellently on other ABS compatible 3d printers. Now available in a large selection of colors, UP Fila Premium ABS is high quality no fuss reliable filament with a matt luster and outstanding finish...
  • Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [7HR3MGR3]
    Precio:  $8,619.00

    Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [7HR3MGR3]

    -Titulo Original : Gizmo Dorks Low Odor ABS 3D Printer Filament 1.75mm 1kg, Orange-Fabricante : GIZMO DORKS-Descripcion Original: Uniquely formulated to be virtually smell free while 3D printing // Low odor ABS prints are high in strength and durability while providing for maximum impact resistance. // 200 gram net weight is the perfect sample size to try out filament // Nozzle temperature range 225 - 250 C; filament diameter of 1.75 mm +/- .03 mm // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Size:  |  Color: Gizmo Dorks is now pleased to introduce low odor ABS that eliminates the nasty foul smell emitted during 3D printing. For all of the great mechanical characteristics of ABS, it is known to give off a pungent smell during extrusion. Low odor ABS now gives you all of the wonderful ABS attributes while eliminating the smelly fumes.ABS plastic has always been a great thermoplastic to use in manufacturing and 3D printing for various reasons such as strength and durability. It's why so many commonly used products are made using ABS such as Legos. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with increased flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined. Being one of the most widely used filaments in 3D printing, ABS extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed chamber.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CNet weight: 1 k...
  • Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [7P57ZM2S]
    Precio:  $9,819.00

    Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [7P57ZM2S]

    -Titulo Original : Priline Yellow TPU Filament -1KG 1.75mm(+/-0.03) 3D Printer Filament, 1kg Spool-Fabricante : PRILINE-Descripcion Original: Material: TPU Flexible (Thermoplastic Polyurethane) - Weight: 1 KG (approximately 2.20 lbs) Spool // Size: 1.75mm Spool Diameter: 7.87" Spool Width: 2.83" Spool Hub Hole Diameter: 2.20" // Recommended Printing Temp/Nozzle Temperature: 190-210°C (374-410°F), Base Plate Temperature: 50°C(122°F) // Performance Advantages: PRILINE TPU Flexible filament is a material that is soft and elastic like rubber, similar to the Flexible TPE but typing easier and harder than TPE. It allows for repeated movement or impact without cracking // Refund Guarantee in 30 Days: We trust our products. If you aren’t happy with our 3D printer filament, tell us and We will arrange a refund for you // Color: 1. PRILINE TPU Flexible filament should be printed at lower speed than normal. And printing nozzle type Direct Drive (motor attached to the nozzle) due to its soft lines. 2. TPU Flexible filament applications include seals, plugs, gaskets, sheets, shoes, key ring case for mobile hands-bike parts shock and wear rubber seal (Wearable Device/Protective applications ). 1. 1 KG (2.20 lbs) Spool 2. 1.75mm Diameter (Dimensional Accuracy +/- 0.03mm) 3. Recommended Printing Temp/Nozzle Temperature: 190-210°C (374-410°F), Base Plate Temperature: 50°C(122°F) 4. Spool Diameter: 7.87 - Spool Width: 2.83 - Spool Hub Hole Diameter: 2.20 5. High Compatible with Your 3D Printer: For common all 1.75 mm specification 3D printers such as Ultimaker, Zortrax, Lulzbot, BCN3D , FlashForge, Makergear, MakerBot, Prusa, CEL, Robo. After each print, we recommended storing printer filament in a sealed plastic bag or box to prevent be affected with moisture....
  • Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [0T7P1GH0]
    Precio:  $10,989.00

    Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [0T7P1GH0]

    -Titulo Original : Gizmo Dorks 1.75 mm Flexible Filament (TPU), 1 kg for 3D Printers, White-Fabricante : GIZMO DORKS-Descripcion Original: 3D flexible filament is capable of producing very intricate parts // Can print prototypes or 3D parts that require the need to bend while still maintaining the original shape // Flexible filament is made from TPU, thermoplastic polyurethane // TPU plastic is used in many everyday applications such as cell phone cases to medical devices // Shore Hardness of 95A //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6Y6KYRHS]
    Precio:  $10,109.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6Y6KYRHS]

    -Titulo Original : TIANSE Gold PLA 3D Printer Filament, 1 kg Spool, 1.75 mm, Dimensional Accuracy +/- 0.03 mm-Fabricante : TIANSE-Descripcion Original: 1. 75mm Filament Diameter (Dimensional Accuracy +/- 0. 03mm) - Material: PLA - Weight: 2. 20 lbs Spool (Nearly 1247ft) // Finest Material: Raw material from USA. with good performance. Suit for most 3D printers and 3D pen (Prusa, Makerbot etc.. ) // Smooth Printing: Orderly wrapped, Melt well, Feed smoothly and constantly without clogging or bubble issue. Recommended Extrusion/Nozzle Temperature 190°C - 210°C (356°F - 410°F) // Spool Diameter: 7. 87" - Spool Width: 3. 78" - Spool Hub Hole Diameter: 2. 20" // 100% Satisfaction : 2-Year and 24*7 customer support with technical advice //...
  • Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [0J0HB1YI]
    Precio:  $8,039.00

    Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [0J0HB1YI]

    -Titulo Original : HATCHBOX ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Red-Fabricante : HATCHBOX-Descripcion Original: 1 KG (approximately 2.20 lbs.) Spool // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) // ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant // Recommended Extrusion/Nozzle Temperature 210°C - 240°C (410°F - 464°F), Use With Heated Build Platform Is Recommended // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 1.25" // Welcome to HATCHBOX 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. ABS or Acrylonitrile Butadiene Styrene, is a tough and durable thermoplastic. It's ability to with stand higher temperatures, ABS is one of the most popular and commonly chosen material on the market. ABS can be used for full functional models, and is the closest material to real production models. The 3D printed object will have a glossy type finish with ABS. Why we love it: Prints at higher temperature Tough and durable Requires less manual finishing Process in acetone for polished finish...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7GNKRJPZ]
    Precio:  $8,929.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7GNKRJPZ]

    -Titulo Original : PLA Filament 1.75mm, ERYONE Filament PLA 1.75mm, 3D Printing Filament PLA for 3D Printer, 1kg 1 Spool, Blue-Fabricante : ERYONE-Descripcion Original: Print Temperature Range: 190°C-220°C 1) Different printer and filament ask different temperature, please print a temp tower first.) // High Quality: 1.75mm, tolerance +/- 0.05mm, N.W.: 1kg, Shipping weight 1.28kg // Tangle Free: Specially designed to reduce Tangling // Jam Free: Specially designed to reduce nozzle jams // for MK3 printer: 1) print temp tower, 2)clean metal extruder or add PTFE thorat. // Color: At ERYONE we pride ourselves on offering our best service, advice, and support. Our staff is attentive and knowledgeable - we've been 3D printing for several years now and are happy to answer your 3D printing questions. Have a question about the amazing capabilities ERYONE Series filament? No problem. Feel free to contact us. Diameter: 1.75mm Tolerance: +/-0.05 Print Temperature: 190-220°C Recommended Printing Temperature: 210-220¡æ Recommended Print Speed: 50-100mm/s 1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle. 2. In order to extend the life of your filament, please store it in a dry, sealed bag or box. Preferably, add a packet of Silca Gel to absorb any excess moisture. 3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time...
Mostrar del 1 al 24 (de 541 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]