Arriba

Impresión > Impresión 3D > Filamentos

Mostrar: 
Mostrar del 1 al 24 (de 609 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0MBY4L1C]
    Precio:  $10,259.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0MBY4L1C]

    -Titulo Original : Monoprice PLA 3D Printer Filament - Glow In The Dark Green - 1kg Spool, 1.75mm Thick | | For All PLA Compatible Printers-Fabricante : MONOPRICE-Descripcion Original: PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. // It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). // This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. // It has a nominal processing temperature of 210° C (410°F). // Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. // Size:  |  Color: Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot...
  • Filamento Termico 2.85mm 0.2kg COLOR FOTO-1 IMP 3D -7CYP3NVS
    Precio:  $3,379.00

    Filamento Termico 2.85mm 0.2kg COLOR FOTO-1 IMP 3D -7CYP3NVS

    -Titulo Original : Gizmo Dorks PLA Filament 3mm (2.85mm) 200g for 3D Printers, Heat Color Change Blue to White-Fabricante : GIZMO DORKS-Descripcion Original: PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant // Recommended Nozzle Temperature: 190 - 225 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Filament color is blue at room temperature and white when heated above 88F. Filament color returns back to blue when cooled below 88F. // PLA filament is made from the highest quality virgin material. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.Color changing filament is a special filament formulation that changes color when heat is applied. When the temperature of the plastic rises above approximately 88 F, the filament will change to another color. This also means that the plastic will change colors simply by touch such as when holding it in your hand. When the temperature drops down below 88 F, the filament changes back to it's default color.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 2.85mm +/- 0.03mmNet Weight: 200 gramsStandard - Black, Blue, Glow in the Dark, Green, Grey, Orange, Purple, Red, Transparent, and WhiteHeat Color Changing Colors - Blue to White, Green to Yellow, Gray to White, and Purple to PinkBlack Light Reactive Colors - Fluorescent YellowGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool. It's a perfect size to sample...
  • Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [7HR1MT16]
    Precio:  $8,209.00

    Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [7HR1MT16]

    -Titulo Original : Gizmo Dorks Low Odor ABS 3D Printer Filament 3mm (2.85mm) 1kg, Sky Blue-Fabricante : GIZMO DORKS-Descripcion Original: Uniquely formulated to be virtually smell free while 3D printing // Low odor ABS prints are high in strength and durability while providing for maximum impact resistance. // 200 gram net weight is the perfect sample size to try out filament // Nozzle temperature range 225 - 250 C; filament diameter of 2.85 mm +/- .03 mm // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Size:  |  Color: Gizmo Dorks is now pleased to introduce low odor ABS that eliminates the nasty foul smell emitted during 3D printing. For all of the great mechanical characteristics of ABS, it is known to give off a pungent smell during extrusion. Low odor ABS now gives you all of the wonderful ABS attributes while eliminating the smelly fumes.ABS plastic has always been a great thermoplastic to use in manufacturing and 3D printing for various reasons such as strength and durability. It's why so many commonly used products are made using ABS such as Legos. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with increased flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined. Being one of the most widely used filaments in 3D printing, ABS extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed chamber.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CNet weight: 1 k...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0ITZQ520]
    Precio:  $8,209.00

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0ITZQ520]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) PLA Filament 1kg / 2.2lb for 3D Printers, Fluorescent Green (UV Light)-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [71XP8NTP]
    Precio:  $7,659.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [71XP8NTP]

    -Titulo Original : NOVAMAKER 3D Printer Filament - White 1.75mm PLA Filament, PLA 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm-Fabricante : NOVAMAKER-Descripcion Original: 1 kg (2.20 lbs) PLA Filament Vacuumed Sealed With Desiccant // 1.75mm Diameter (Dimensional Accuracy +/- 0.03mm), The temperature range for this Filament Refills is 220-250 °C (428°F-482°F), Best temperature 235°C(455°F). // Printing temperature: 190-220 °C (374°F-428°F), Best temperature 195°C(383°F) // No Bubble and Block Nozzle, Nood Stick Hot Bed, A Smooth PLA Used // Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A // Color: Diameter :  Tolerance Level :  Print Temperature :  Print Speed :  Base Plate Temperature :  Bubble :  Length :  Spool Diameter: -Spool Width: Spool Hub Hole Diameter: NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! The PLA 3D printer filaments are backed by NovaMaker . Seize the chance to click button right now...
  • Filamento TPU 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [7HR2JXDV]
    Precio:  $3,379.00

    Filamento TPU 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [7HR2JXDV]

    -Titulo Original : Gizmo Dorks Flexible TPU 3D Printer Filament 1.75mm 200g, Blue-Fabricante : GIZMO DORKS-Descripcion Original: 3D flexible filament is capable of producing very intricate parts // Can print prototypes or 3D parts that require the need to bend while still maintaining the original shape // TPU plastic is used in many everyday applications such as cell phone cases to medical devices // Flexible filament is made from TPU, thermoplastic polyurethane, with a shore hardness of 96A // Perfect sample filament size to test for quality and color, net weight of 200 grams // Color: Gizmo Dorks provides many 3D filament material types including ABS, PLA, and HIPS. However, these traditional plastics are printed into a stiff and rigid form. New materials are being brought to market every day, and Gizmo Dorks is proud to introduce the flexible filament line. Gizmo Dorks flexible filament is based off of TPU, which is Thermoplastic Polyurethane. TPU flexible filament is a soft bendable plastic that retains it's shape and form. It is a strong durable filament that is comparable to rubber. TPU filament has wonderful properties such as semi-transparency and elasticity. TPU plastic is also resistant to oils and grease.There are many practical uses for TPU as a material, and TPU can be found in my everyday applications. You will find TPU being used anywhere from car parts to power tools and medical devices. TPU is also a popular plastic used in protective cases for cell phones and tablets.Extrusion temperature: 200-220 CBed temperature: 80 - 100 CPrint Speed: 30 - 50 mm/sLayer Thickness: Above 0.1mmNet Weight: 200 gramsAfter many requests for a smaller sample spool, Gizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7DLBFVX1]
    Precio:  $10,459.00

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7DLBFVX1]

    -Titulo Original : PrimaCreator EasyPrint 3D Printer Filament - PLA - 2.85mm - 1 kg (2.2 lbs) Spool - Transparent-Fabricante : PRIMACREATOR-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 3.0mm 1kg COLOR FOTO-1 IMP 3D [0T7N5A5Q]
    Precio:  $8,499.00

    Filamento PLA 3.0mm 1kg COLOR FOTO-1 IMP 3D [0T7N5A5Q]

    -Titulo Original : Gizmo Dorks 3 mm PLA Filament, 1 kg for 3D Printers, Opaque Blue-Fabricante : GIZMO DORKS-Descripcion Original: 2.85 mm diameter, 1 kg net weight // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Print Temperature: 220 - 225°C // Heated Platform Not Required //...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [81ZS1M6T]
    Precio:  $7,939.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [81ZS1M6T]

    -Titulo Original : YOYI 3D Printer Filament,Petg Filament 1.75mm,Dimensional Accuracy +/- 0.03 mm,1kg Spool(2.2 lbs),100% raw Material, Eco-Friendly (Violet)-Fabricante : YOYI-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 0.75kg COLOR FOTO-1 IMP 3D [0YXBNDHY]
    Precio:  $12,869.00

    Filamento PLA 1.75mm 0.75kg COLOR FOTO-1 IMP 3D [0YXBNDHY]

    -Titulo Original : Polymaker PLA (Polylactic Acid) PolyMax Spool, 1.75 Diameter, 750 g, 1.75 mm, White-Fabricante : POLYMAKER-Descripcion Original: Jam Free: Our patented Jam-Free technology dramatically improves the heat stability of our PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies // Extremely Tough : Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, PolyMax PLA is a sure winner when it comes to toughness // With PolyMax PLA you can get rid of that potentially hazardous ABS and still achieve the same structural strength with even more benefits such better printer compatibility // Easier printing, less warping, no hazardous odors, and in many cases even better mechanical properties //...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [1A6OUQ58]
    Precio:  $9,449.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [1A6OUQ58]

    -Titulo Original : 3D Solutech See Through Green 1.75mm PETG 3D Printer Filament 2.2 LBS (1.0KG) - PETG175GRN-Fabricante : 3D SOLUTECH-Descripcion Original: 1.75Mm see through green petg filament // For common 3D printers such as makerbot, RepRap, finial, up, Mendel, flash forge, sol doodle 2, printout lc, maker gear M2 and etc // Backed by our 100 percent satisfaction guarantee // Temperature range is 200°c - 220°c // Color: Ultra smooth technology our ultra smooth technology includes filaments capable of beautiful and smooth Extraction to help build even the most delicate objects. Vacuum sealed we use vacuum-sealed packaging to isolate the moisturized environment and filament, and provide the best performance possible. High compatibility our filaments have been tested on various 3D printer brands, receiving widespread and positive customer feedback. 3D Solutech is a professional filament manufacturer specializing in providing a wide range of colors and materials for 3D printing. Quality is always our top priority, and we check each spool, vacuum seal, and package by hand to ensure optimal product quality. Our filament is a proven winner, and maintains the smooth and consistent printing experience needed to achieve the best printing results. Our filament is always round, and contains no oily residue, air bubbles, kink, use or breaks. Check out our store for the latest colors and materials for your 3D printer. Package includes: 1 x 1.75mm see through green PETG filament (2.2lbs) 1 x filament clip...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [746FHN67]
    Precio:  $8,229.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [746FHN67]

    -Titulo Original : NOVAMAKER 3D Printer Filament - Green 1.75mm PETG Filament, PETG 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm-Fabricante : NOVAMAKER-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2GOIO]
    Precio:  $7,929.00

    Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2GOIO]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) ABS Filament 1kg / 2.2lb for 3D Printers, Silver-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PLA 1.75mm 0.5kg COLOR FOTO-1 IMP 3D [7TWSTFJB]
    Precio:  $12,419.00

    Filamento PLA 1.75mm 0.5kg COLOR FOTO-1 IMP 3D [7TWSTFJB]

    -Titulo Original : 1.75mm Silk Metallic Shiny Red Copper PLA Filament Bundle - 3D Printer Material Each Spool 0.5kg, 3 Spools Pack, Total 1.5kgs 3D Printing Material with Extra Gift Stick Tool by MIKA3D-Fabricante : MIKA3D-Descripcion Original: Most Popular Silk Metallic Red Copper Colors: Silk Filament Shinning Copper Colors, It's very Suitable to Print Beautiful Copper 3D Printing Shiny Items // Strong Compatibility: 1.75mm Diameter, Universal Compatible with Diverse FDM 3D Printers in Market, Melt well and Feed Smoothly, Silk-Like-Feel - Silky Shinny Surface with Silk Luster, Giving Smooth, Pearly and Unique Touch // 100% Tangle-Free Tips: All of Our Filament are 100% Tangle-Free before Package Opened, Pls Insert Free End of Filament into Spool Holes to Avoid Being Tangled for Next Time Use // Extra Gift: One Premium Quality Bottle of Solid Stick for Your 3D Printer Head Bed, Pack and Ship Together // Package & Warranty: Contains 3 Spools, Each Spool Contains 1.1lbs Filament, Total 3.3lbs Filament in One Box. Within 24 hours Response,100% Satisfaction Guarantee //...
  • Filamento CARBONO 1.75mm 1kg COLOR FOTO-1 IMP 3D [78J5BYSJ]
    Precio:  $9,359.00

    Filamento CARBONO 1.75mm 1kg COLOR FOTO-1 IMP 3D [78J5BYSJ]

    -Titulo Original : 3D BEST-Q Carbon Fiber PLA 1.75mm 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1KG Spool, Really Carbon Fiber-infill,Black-Fabricante : 3D BEST Q-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [1EKFVAMW]
    Precio:  $9,039.00

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [1EKFVAMW]

    -Titulo Original : eSUN 3mm Blue PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Actual Diameter 2.85mm +/- 0.05mm, Blue, (Pantone 7691C)-Fabricante : ESUN-Descripcion Original: 1KG net (approximately 2.2 lbs) Filament with Clear Spool, Blue, Pantone 7691C // eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. // 3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm). This is 3mm filament and actual diameter is 2.85mm +/- 0.05mm. This filament does not work with 1.75mm printers. Make sure your printer supports 2.85mm filament before purchasing to avoid unnecessary returns. // Recommended Extrusion/Nozzle Temperature 210C - 225C, about 20 Celsius higher than regular PLA. // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Color: Size: 3mm nominal, 2.85mm +/-0.05mm actual Extrusion Temperature Range: 210 to 225 Celsius Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem. PLA PRO prints about 20 Celsius higher than regular PLA and produces strong products...
  • Filamento ABS 3.0mm 1kg COLOR FOTO-1 IMP 3D [0MVIQ6QG]
    Precio:  $8,509.00

    Filamento ABS 3.0mm 1kg COLOR FOTO-1 IMP 3D [0MVIQ6QG]

    -Titulo Original : eSUN 3mm White ABS 3D Printer Filament 1kg Spool (2.2lbs), White-Fabricante : ESUN-Descripcion Original: 1KG net (apximately 2.2 lbs) Filament with Clear Spool // eSUN ABS 3D Printer Filament Vacuumed Sealed With Desiccant // 3mm Filament Diameter (Actual diameter 2.85mm +/- 0.05mm) // Recommended Extrusion/Nozzle Temperature 220C - 260C // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Diameter: 3mm nominal, 2.85mm +/- 0.05mm actual. Note: Make sure your printer can print 3mm filament. Extrusion Temperature Range: 220 Celsius to 260 Celsius Bed Temp: 100 Celsius to 110 Celsius ABS Advantages: Lower warp than other ABS. Easy on acetone bath...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7PJ35G4V]
    Precio:  $7,939.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7PJ35G4V]

    -Titulo Original : OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer, Blue-Fabricante : OVERTURE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [7HR3BQ9X]
    Precio:  $10,479.00

    Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [7HR3BQ9X]

    -Titulo Original : Gizmo Dorks Flexible TPU 3D Printer Filament 1.75mm 1kg, Blue-Fabricante : GIZMO DORKS-Descripcion Original: 3D flexible filament is capable of producing very intricate parts // Can print prototypes or 3D parts that require the need to bend while still maintaining the original shape // TPU plastic is used in many everyday applications such as cell phone cases to medical devices // Flexible filament is made from TPU, thermoplastic polyurethane, with a shore hardness of 96A // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds //...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [1LMDFWVU]
    Precio:  $8,509.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [1LMDFWVU]

    -Titulo Original : eSUN 3D 1.75mm Solid Silver PETG 3D Printer Filament 1KG Spool (2.2lbs), 1.75mm Solid Opaque Silver-Fabricante : ESUN-Descripcion Original: 1KG net (approximately 2.2 lbs) Filament with Clear Spool // eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) // Recommended Extrusion/Nozzle Temperature 240C - 255C // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Extrusion Temperature Range: 240 to 255 Celsius Plate temperature: 80~90 Celsius or without heated Printing speed: 30~60mm/s Moving speed: 30~60mm/s 10 Solid/Opaque Colors(Solid Black, Solid White , Solid Red, Solid Silver, Solid Gold, Solid Gray, Solid Blue, Solid Green, Solid Purple, Solid Yellow) and 6 Semi-translucent Colors(Blue, Magenta, Green, Orange, Yellow, Natural). PETG is an excellent material which combines the advantages of other filaments. Odorless; Little shrinkage rate; hydrophobicity (Does not absorb water); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish; There are a lot of eSUN PETG clients and experience sharing since it was released in 2014. Ask ESUN/INTSERVO if you need help dial it in. PETG requires slower printing speed than other materials...
  • Filamento Abs 1.75mm 1kg Color Foto-1 Imp 3d [0mv7t3to]
    Precio:  $8,229.00

    Filamento Abs 1.75mm 1kg Color Foto-1 Imp 3d [0mv7t3to]

    -Titulo Original : eSUN 1.75mm White ABS 3D Printer Filament 1kg Spool (2.2lbs), White-Fabricante : ESUN-Descripcion Original: 1KG net (apximately 2.2 lbs) Filament with Clear Spool. 1.75mm diameter. // eSUN ABS 3D Printer Filament Vacuumed Sealed With Desiccant // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) // Recommended Extrusion/Nozzle Temperature 220C - 260C // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Extrusion Temperature Range: 220_ to 260_ The filaments are compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm._ ABS is a tough and durable thermoplastic which can withstand high temperature...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [7D5C4X8R]
    Precio:  $20,449.00

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [7D5C4X8R]

    -Titulo Original : SainSmart 5 Colors Flexible TPU 3D Printing Filament, 1.75 mm, 250g, Dimensional Accuracy +/- 0.05 mm-Fabricante : SAINSMART-Descripcion Original: 5 Colors in a set(Emerald Gold Pink Violet Blue).TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market which accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, X Creality, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby orprototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 0.25 kg of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.25 kg * 5 (5 color) Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 5x SainSmart TPU Flexible Filament 1.75mm 0.25kg vacuum sealed w/ desiccant 5 Colors in a set(Emerald Gold Pink Violet Blue...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [1997F482]
    Precio:  $11,479.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [1997F482]

    -Titulo Original : Monoprice Premium 3D Printer Filament PETG - Blue - 1kg Spool, 1.75mm Thick | FDA Food Grade | Ideal for Utensils & Dishware | For All PETG Compatible Printers-Fabricante : MONOPRICE-Descripcion Original: It's the perfect filament to combine strength and flexibility, which is why it's used in so many mechanical parts or robotics. // The filament is super transparent with a glossy finish. It has great chemical resistance with good acidic and alkali resistance. // The superb chemical resistance is why the FDA has approved PET as acceptable for direct food contact. // The filament is environmentally friendly and recyclable. PETG is known for it's transparency and clarity so you’re getting the benefits of both PLA and ABS in PETG. // The nominal print temperature is 230 ~ 250°C (446 ~ 482°F). // Size:  |  Color: New to Monoprice is the offering of PETG (Polyethylene Terephthalate Glycol) filament, which has more flexible strength than ABS filament. It's the perfect filament to combine strength and flexibility, which is why it's used in so many mechanical parts or robotics. The filament is super transparent with a glossy finish. It has great chemical resistance with good acidic and alkali resistance. The superb chemical resistance is why the FDA has approved PET as acceptable for direct food contact. The filament is environmental friendly and recyclable. PETG is known for it's transparency and clarity so you’re getting the benefits of both PLA and ABS in PETG. The nominal print temperature is 230 ~ 250°C (446 ~ 482°F)...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7YJL8Y3F]
    Precio:  $8,229.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7YJL8Y3F]

    -Titulo Original : DURAMIC 3D PETG Printing Filament 1.75mm, 3D Printing Filament with Build Surface 200 x 200mm, 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.05 mm (Red, 1 Pack)-Fabricante : DURAMIC 3D-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
Mostrar del 1 al 24 (de 609 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]