Arriba

Impresión > Impresión 3D > Filamentos

Mostrar: 
Mostrar del 1 al 24 (de 450 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7PFSFFZZ]
    Precio:  $100,339.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7PFSFFZZ]

    -Titulo Original : OVERTURE PLA Filament 1.75mm with 3D Build Surface 200mm × 200mm 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer, Assorted Colors, 6 Spools-Fabricante : OVERTURE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 3.0mm 1kg COLOR FOTO-1 IMP 3D [0E5XO3CE]
    Precio:  $26,619.00

    Filamento PLA 3.0mm 1kg COLOR FOTO-1 IMP 3D [0E5XO3CE]

    -Titulo Original : Monoprice PLA Premium 3D Printer Filament - Black - 1kg Spool, 3mm Thick-Fabricante : MONOPRICE-Descripcion Original: PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. // It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). // This 1 kg spool features a thickness of 3.0mm ±0.10mm, with a roundness variation of only 0.03mm. // It has a nominal processing temperature of 185° C (365°F). // Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. // Style:  |  Color:  |  Size: Get outstanding 3D printing results when you use 3.0mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 3.0mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 185° C (365°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot...
  • Filamento PETG 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [7XW96JFF]
    Precio:  $20,959.00

    Filamento PETG 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [7XW96JFF]

    -Titulo Original : Gizmo Dorks PETG Filament for 3D Printers 2.85mm 200g, 4 Color Pack - Blue, Green, Transparent, Red-Fabricante : GIZMO DORKS-Descripcion Original: Recommended Nozzle Temperature: 230 - 260 C; Filament diameter - 2.85mm // PETG combines the benefits of ABS and PLA, increased strength and flexibility // Net weight: 200 grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25" // PETG filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more // Color pack contains 4 spools, each spool contains 200g of filament. Colors: Blue, Green, Transparent, Red //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7H5G4C24]
    Precio:  $22,299.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7H5G4C24]

    -Titulo Original : Silk PLA 3D Printer Filament 1.75mm 1KG 2.2 LBS Spool 3D Printing Material CC3D Shine Silky Shiny Metallic Metal Gold Silver Copper Bronze PLA Filament (Silver Blue)-Fabricante : CC3D-Descripcion Original: PRODUCES THE BEST 3D PRINTS: This 3D printing filament offers excellent dimensional accuracy with no more than 30 microns of diameter variance. This allows for better and more consistent feeding as well as higher quality 3D prints. You can get professional results right from your own 3D printing machines. // HIGHLY COMPATIBLE: We at 3D Solutech are proud to provide you with flexible PLA filament that is compatible with almost all 3D printers, including those from RepRap, MakerBot (such as the Replicator and Replicator 2), Ultimaker, Bits from Bytes, Airwolf 3D, MakerGear, Printrbot, Bukobot, Type A Machines, and many more. // HASSLE-FREE OPERATION: At 3D Solutech, we engineer our 3D printer filament and other materials to adhere to all regulations and standards of quality to ensure trouble-free operation and amazing results. We know that your 3D printer is an expensive investment. That’s why we offer our superior filament to match it rather than forcing you to settle for cheap alternatives. Your choice is clear! // MEETS ALL 3D PRINTING NEEDS: At 3D Solutech, our durable printing filament is highly versatile and can meet all of your 3D printing needs and applications. It comes in a variety of 3 different colors, including white, silver, hot pink, navy blue, and more. No wonder it’s the first choice of engineers and designers! // ENVIRONMENTALLY FRIENDLY: Did you know that our PLA filament is stronger than alternative PLA filaments? It consists of polylactic acid and algae harvested from areas where it harms the environment in excess amounts. Additionally, it requires less energy to print because it requires a low printing temperature. // Color: 3D printing is an emerging field, especially in the areas of design and engineering. Why not stay ahead of it and give life to your dreams with our quality filament at 3D Solutech? With us, you’ll find highly versatile filament to complete your printing kit that is compatible with nearly all 3D printers. At 3D Solutech, we know that you rely on your 3D printer to make your ideas a reality, and our filament is what helps you to do that. 3D Solutech was founded in 2012 with a goal of innovating 3D printing filaments. We have committed ourselves to providing the very finest filaments and color selections to help you carry out successful projects while having fun. We have faith in the future of this method of printing and love doing it ourselves and creating unique objects. We make sure that our products are always affordable to you and that everyone has the opportunity to create and sell on their own. With our 3D printer PLA filament, you’ll know you’re getting the best results. It offers high dimensional accuracy with no more than 30 microns of diameter variance. This allows for better and more consistent feeding as well as higher quality 3D prints, yielding professional results right from your own 3D printing machines. Our PLA printing filament is also stronger and better for the environment than competing 3D printing products. They require less energy to print because they have lower printing temperatures. Enjoy the hassle-free printing experience of quality filament by relying on 3D Solutech today...
  • Filamento Termico 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ITZOB9Y]
    Precio:  $28,789.00

    Filamento Termico 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ITZOB9Y]

    -Titulo Original : Gizmo Dorks 1.75mm PLA Filament 1kg / 2.2lb for 3D Printers, Color Change Gray to White-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PLA 3.0mm 1kg COLOR FOTO-1 IMP 3D [0T7N6GJA]
    Precio:  $22,489.00

    Filamento PLA 3.0mm 1kg COLOR FOTO-1 IMP 3D [0T7N6GJA]

    -Titulo Original : Gizmo Dorks 3 mm PLA Filament, 1 kg for 3D Printers, Light Yellow-Fabricante : GIZMO DORKS-Descripcion Original: 2.85 mm diameter, 1 kg net weight // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Print Temperature: 220 - 225°C // Heated Platform Not Required //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6XRC4HN6]
    Precio:  $18,999.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6XRC4HN6]

    -Titulo Original : CCTREE ST-PLA (PLA+) 3D Printer Filament 1.75mm Accuracy +/- 0.03 mm 1kg Spool (2.2lbs) for Creality Ender 3/Ender 3 Pro,CR-10S/CR-10S Pro Red-Fabricante : CCTREE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [74W2TNKB]
    Precio:  $19,799.00

    Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [74W2TNKB]

    -Titulo Original : Gizmo Dorks PLA Filament for 3D Printers 1.75mm 200g, 4 Color Pack - Black, Grey, Transparent, White-Fabricante : GIZMO DORKS-Descripcion Original: PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant // Recommended Nozzle Temperature: 190 - 225 C; Filament diameter - 1.75mm // Net weight: 200 grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25" // PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more // Color pack contains 4 spools, each spool contains 200g of filament. Colors: Black, Grey, Transparent, White //...
  • Filamento De Impresora 3d 1 kg 1,75 Mm Sunlu Silk Gold
    Precio:  $25,669.00

    Filamento De Impresora 3d 1 kg 1,75 Mm Sunlu Silk Gold

    -Titulo Original : SUNLU Silk PLA 3D Printer Filament 1.75mm, Shiny PLA Filament 1.75mm Dimensional Accuracy /- 0.02mm, 1kg Spool(2.2lb), Silky 1.75 PLA Light Gold-Fabricante : SUNLU-Descripcion Original: - [PLA de seda brillante] Acabado suave y brillante como la seda real, no se necesita pulido adicional, la impresión con gran detalle da como resultado un hermoso acabado. El filamento PLA de seda de alta calidad de SUNLU brinda artes y manualidades y proyectos 3D, una superficie suave y brillante como la seda que definitivamente brinda un resultado sorprendente. - [Consistencia y precisión dimensional] El avanzado sistema de control autoadaptativo y la medición del diámetro CCD en la fabricación garantizan estos filamentos PLA Silk de 1,75 mm de diámetro, precisión dimensional +/- 0,02 mm; Bobina de 1 kg (2,2 libras) - [Sin obstrucciones, sin burbujas y fácil de usar] --- Diseñado y fabricado con la patente Clog-Free para garantizar una experiencia de impresión más fluida y estable con SUNLU PLA Plus. Secado completo durante 24 horas antes del envasado y sellado al vacío con desecantes en bolsa resellable de nailon, SUNLU 3D promete que no se enreda, burbujea ni obstruye debido a su rígido control de calidad de fabricación. Danos la oportunidad de demostrar que somos tu futuro filamento favorito con su extrusión suave y su rendimiento de impresión estable. grabación - [Compatibilidad rentable y amplia] --- SUNLU 3D puede producir miles de toneladas de filamentos por mes, que pueden producir varios filamentos a gran escala y de alta calidad para que los filamentos de SUNLU sean rentables y altamente confiables. AMPLIA APLICACIÓN: perfecta y fácil para la escuela, el hogar, la sala de exposición, la oficina y los campos de la electrónica, etc. Compatibilidad universal con diversas impresoras 3D FDM en el mercado...
  • Filamento Metal 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74W3Q7NL]
    Precio:  $10,219.00

    Filamento Metal 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74W3Q7NL]

    -Titulo Original : Gizmo Dorks Metal Copper Fill Filament for 3D Printers 3mm (2.85mm) 200g-Fabricante : GIZMO DORKS-Descripcion Original: Metal Copper (Copperfill with PLA base) 3D printer filament vacuumed sealed with desiccant // Extrusion nozzle temperature: 190 - 225 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more. // metal copper fill filament is a new filament that allows unique prints with a metallic look and finish. Metal copper filament is a unique blend made by combining real copper powder with PLA filament, and the filament prints very similar to normal PLA. The filament can be printed on either heated or non heated build plates. It's suggested to print on blue painters tape, and there is essentially no warping. If a heated build plate is used, then please set it to 60 C, and the print will have an increased adhesion to the platform. Metal copper fill can also be printed on regular glass, glass with glue stick, or kapton tape.Please be wary of heat creep. PLA already suffers from heat creep and because this filament has real copper powder mixed in, heat creep effects may be accentuated.Metal copper filled prints can be post processed. Start with using coarse steel wool to polish the surface. Remember this is just a polish and there is not that much pressure needed. Follow it up by applying a thin coat of black spray paint and immediately wiping it off with a cloth. This will leave the places that are harder to reach with a slight black tint giving it a beautiful contrast. Lastly, a copper polish can also be used to give a brighter shine and give some patina.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 2.85mmDiameter Range: +/- 0.03mmNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0IACBX42]
    Precio:  $34,849.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0IACBX42]

    -Titulo Original : Monoprice PLA 3D Printer Filament - Bright Green - 1kg Spool, 1.75mm Thick | | For All PLA Compatible Printers-Fabricante : MONOPRICE-Descripcion Original: PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. // It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). // This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. // It has a nominal processing temperature of 210° C (410°F). // Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. // Size:  |  Color: Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7VCQB9JY]
    Precio:  $26,569.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7VCQB9JY]

    -Titulo Original : OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer (Purple)-Fabricante : OVERTURE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento Nylon 1.75mm 1kg COLOR FOTO-1 IMP 3D [0LAJR8R8]
    Precio:  $25,989.00

    Filamento Nylon 1.75mm 1kg COLOR FOTO-1 IMP 3D [0LAJR8R8]

    -Titulo Original : Gizmo Dorks 1.75mm Nylon Filament 1kg / 2.2lbs for 3D Printers, Black-Fabricante : GIZMO DORKS-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [71SJ8SDQ]
    Precio:  $15,659.00

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [71SJ8SDQ]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Blue)-Fabricante : SAINSMART-Descripcion Original: Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm. // Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones. // SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones. // Flexible Filament does not feed well on all 3D printers. Please check your printer specifications before ordering. Only available in 1.75mm diameter. // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber. 95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. In comparison with most common filaments like PLA and ABS, TPU must be run much slower. - Material: Rep-Flex TPU - Vacuumed Sealed with desiccant - Shore Hardness: 95A - Weight: 250g Spool - Diameter: 1.75mm (+/- 0.05mm) - Recommended extruder temperature:195 - 230°C - Recommended platform temperature: 40 - 60°C Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles. With bowden extruder you might pay more attention to these tips: - Print slow 15-30 mm/s Printing speed - First layer settings. (Height 100% Width 150% speed 50% e.g.) - Retraction disabled. This would reduce messy, stringing or oozing printing result. - Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer. If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly. It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear. Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament. I 1x SainSmart TPU Flexible Filament 1.75mm 250g(vacuum sealed...
  • Filamento PLA 1.75mm 1.5kg COLOR FOTO-1 IMP 3D [798MZ959]
    Precio:  $28,239.00

    Filamento PLA 1.75mm 1.5kg COLOR FOTO-1 IMP 3D [798MZ959]

    -Titulo Original : 3D Printer PLA Filament Bundle, 1.75mm+/- 0.03mm, Widely Compatible, 3 Spools Pack, 1.1 lbs/Spool, Total 3.3 lbs, with One 3D Print Remove Or Stick Tool (Pack of 4) by Mika3D-Fabricante : MIKA3D-Descripcion Original: High Quality:High Diameter Accuracy +/-0.05mm,No Bubble, Low Odor, Eco-Friendly // Strong Compatibility:Universal Compatible with Diverse FDM 3D Printers: Monoprice, Lulzbot, Flash Forge,etc // Package: Pack Contains 3 Spools, Each Spool Contains 500g Filament, Popular Colors: White, Black, Red // Extra Gift: One Premium Quality 3D Print Remove Tool or One Bottle Glue Stick, Pack and Ship Together // Warranty:We are Confident about PLA Filament Quality,Within 24 hours response,100% Satisfaction Guarantee //...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [82WR3G2L]
    Precio:  $16,199.00

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [82WR3G2L]

    -Titulo Original : Transparent Clear Black PETG Filament 1.75mm 1KG 3D Printer Filament 2.2lbs Spool 3D Printing Materials Fit Most FDM Printer-Fabricante : CC3D-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2E9TA]
    Precio:  $27,389.00

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2E9TA]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) PLA Filament 1kg / 2.2lb for 3D Printers, Silver-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [1MT7O22L]
    Precio:  $23,149.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [1MT7O22L]

    -Titulo Original : PLA Filament 1.75mm, Geeetech 3D Printer PLA Filament,1.75mm,1kg per Spool,White-Fabricante : GEEETECH-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [0J0HB1YI]
    Precio:  $25,719.00

    Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [0J0HB1YI]

    -Titulo Original : HATCHBOX ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Red-Fabricante : HATCHBOX-Descripcion Original: 1 KG (approximately 2.20 lbs.) Spool // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) // ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant // Recommended Extrusion/Nozzle Temperature 210°C - 240°C (410°F - 464°F), Use With Heated Build Platform Is Recommended // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 1.25" // Welcome to HATCHBOX 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. ABS or Acrylonitrile Butadiene Styrene, is a tough and durable thermoplastic. It's ability to with stand higher temperatures, ABS is one of the most popular and commonly chosen material on the market. ABS can be used for full functional models, and is the closest material to real production models. The 3D printed object will have a glossy type finish with ABS. Why we love it: Prints at higher temperature Tough and durable Requires less manual finishing Process in acetone for polished finish...
  • filamento lapiz 3D x 32 colores diferentes 97 metros Mika3D
    Precio:  $13,959.00

    filamento lapiz 3D x 32 colores diferentes 97 metros Mika3D

    -Titulo Original : 32 Colors 3D Pen PLA Filament Refills, Each Color 10 Feet, Total 320 feet, Pack with 4 Finger Caps by Mika3D-Fabricante : Mika3D-Descripcion Original: Número de modelo: TX9025L12S Tamaño: 90 * 90 * 25 mm Voltaje: 12V Corriente: 0.16A Paquete total: ventilador 1pcs * TX9025L12...
  • Filamento Termico 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ITZO23O]
    Precio:  $28,089.00

    Filamento Termico 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ITZO23O]

    -Titulo Original : Gizmo Dorks 1.75mm ABS Filament 1kg / 2.2lb for 3D Printers, Color Change Green to Yellow-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [1IIAC2MW]
    Precio:  $24,859.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [1IIAC2MW]

    -Titulo Original : ZIRO 3D Printer Filament PLA 1.75mm Marble Color 1KG(2.2lbs) - White-Fabricante : ZIRO-Descripcion Original: The surface of printed objects looks like Marble.Suggest using a 4 mm or larger nozzle.Low print speed is recommended. // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) // Suitable for most 3D Printer and 3D Pen. // Suggest print temperature:190-220 // Vacuumed Sealed and free Bone bag for used filament. // 10Years ago, maybe you were worried about how to turn your ideas into reality, today,3D Print technology helps you to be a real maker. ZIRO 3D dedicated in providing high quality and brand new filaments to make your 3D printing different. Environment-friendly material. Strict production standard to guarantee high accuracy, Diameter tolerance:0.05mm Roundness tolerance:0.05mm. Vacuum sealed with desiccant for packing and bone bag for used filament. Compatible with most desktop 3D Printers(1.75mm materials). Enjoy the fun of 3D Printing with ZIRO 3D...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7TRPTYD7]
    Precio:  $0.00

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7TRPTYD7]

    -Titulo Original : Hello3D PLA 3D Printer Filament 1.75mm, Glow In The Dark Green OEM Filament, 3D Printing GID Filament 1KG (2.2Lbs) Spool Luminous Green-Fabricante : HELLO3...
  • Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [7HR38WFQ]
    Precio:  $9,079.00

    Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [7HR38WFQ]

    -Titulo Original : Gizmo Dorks Glitter PLA 3D Printer Filament 1.75mm 200g, Gray-Fabricante : GIZMO DORKS-Descripcion Original: Glitter PLA nozzle temperature range 195 - 225 C; filament diameter of 1.75 mm +/- .03 mm // Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp // 200 gram net weight is the perfect sample size to try out filament // Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming // Spool dimensions are 6 inches by 1.5 inches with a 2.25 inch spindle diameter; the net weight of the filament is 200 grams // Size:  |  Color: Glitter PLA adds a new dimension or sparkle to your print. The PLA glitter colors add a glimmer or twinkle throughout the print creating a unique look. There is a physical speckle dispersed throughout the filament to make your prints stand out. Gizmo Dorks Glitter PLA filament works with a wide range of common 3D printers. PLA (Polylactic Acid) is one of the most commonly used 3D printer material and for good reason. The widely used thermoplastic has a low melting temperature while also being virtually warp free. Glitter PLA does not have an odor like ABS and does not require a heated bed. Getting failed prints because of filament jams is a painful aspect of 3D printing. However, Gizmo Dorks Glitter PLA is specifically engineered to reduce jamming.Glitter PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. Glitter PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Glitter PLA enjoys sharper details and corners compared to ABS without the risk of cracking or warping. Glitter PLA can also be printed at higher throughput speeds.The 200 gram spool is a perfect sample size to test out and try the filament before committing to a 1 kg version...
Mostrar del 1 al 24 (de 450 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]