Arriba

Accesorios para Cámaras > Soportes y Estabilizadores > Estabilizadores para Cámaras

Mostrar: 
Mostrar del 1 al 24 (de 297 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • SMALLRIG 1092 Cheese Plate Multi-Purpose DSLR Mounting Pl...
    Precio:  $9,769.00

    SMALLRIG 1092 Cheese Plate Multi-Purpose DSLR Mounting Pl...

    -Titulo Original : SMALLRIG Cheese Plate Multi-Purpose DSLR Mounting Plate with 1/4 and 3/8 Thread - 1092-Fabricante : SMALLRIG-Descripcion Original: Equipped with plenty of 1/4’’-20 and 3/8"-16 holes, allowing you to mount articulating arms, rods, batteries, converter boxes and various other camera accessories to your support system // Compatible with SmallRig 15mm railblock 942, which allows to mount this plate vertically and enable to mount 15mm rods // Lightweight, only weighs 0.59lb // Sturdy and durable, made of aluminum alloy // Dimension: 155x80x10mm (LxWxH) // Aluminum Alloy155x80x10mm (LxWxH) 1 x Mounting Plat...
  • Smallrig 2256 Monitor Mount with NATO Clamp and Locating ...
    Precio:  $18,979.00

    Smallrig 2256 Monitor Mount with NATO Clamp and Locating ...

    -Titulo Original : SMALLRIG Monitor Mount with NATO Clamp and Locating Pins for Arri 2256-Fabricante : SMALLRIG-Descripcion Original: 【UNIVERSALITY】SMALLRIG Monitor Mount 2256 is compatible with 5'' or 7'' monitor and provides a support to customers using . The max load of this monitor mount is 1.5kg // 【STRUCTURE】Locked via the 3/8" locating pin for ARRI standard on one end for anti-twisting purpose and NATO clamp on the other end to monitor // 【TOOLLESS】 Features a tool free thumbscrew for ARRI standard to lock monitor and a knob to lock the NATO clamp. You can use the mount with one hand without any tool, which makes shooting more convenient // 【180°ADJUSTABLE】Allows to adjust the position of monitor up to 180 degree without using tool. When not in use, the mount simply folds away for storage // 【RECOMMENDATION】 The monitor mount can connect any monitor cages with locating holes for ARRI standard or NATO clamp on the bottom, such as SMALLRIG monitor cage 2008, monitor cage 2249. Also it can be attached to the bottom of Atomos Ninja V via the locating holes for ARRI standard on Ninja V after taking off the screw adapter //...
  • SMALLRIG 2083 Right Side Wooden Grip with Rosette Bolt-On...
    Precio:  $39,779.00

    SMALLRIG 2083 Right Side Wooden Grip with Rosette Bolt-On...

    -Titulo Original : SMALLRIG Right Side Wooden Grip with Rosette Bolt-On Mount - 2083-Fabricante : SMALLRIG-Descripcion Original: SmallRig Right Side Wooden Grip Handle with Rosette Bolt-On Mount 2083 is exclusively designed for small sized camera cages, like SmallRig Cage 1661/1889/2049/1585/2004/2012/1950/1881/1844 // The wooden handle is an assembly of SmallRig wooden handle 1941 and SmallRig rosette mount 1939 // The Rosette can be adjusted up and down per your need for better handheld // The handgrip is made by handcrafted rosewood. It is ergonomically designed for comfortable handheld experience // Lightweight, only weighs 0.6lb //...
  • Smallrig 2274 Bmpcc4k Camera Counterweight Mounting Clamp..
    Precio:  $13,159.00

    Smallrig 2274 Bmpcc4k Camera Counterweight Mounting Clamp..

    -Titulo Original : SMALLRIG BMPCC4K Camera Counterweight Mounting Clamp for DJI RoninS, for Zhiyun Weebill Lab/Crane Series Gimbals 2274-Fabricante : SMALLRIG-Descripcion Original: Designed for DJI RoninS and Zhiyun Weebill Lab/Crane Series Gimbals. // Each side comes with a 1/4”-20 threaded holes to support counterweights. // Add rubber pad to prevent scratching your camera. // Quick release attachment and detachment. // Hassle-Free Warranty: At SMALLRIG, not only we offer high quality products,we back them up with 18-month warranty and a 30-day money back guaranty //...
  • Neewer Estabilizador Para Canon Nikon Sony And Other Dslr
    Precio:  $25,369.00
    Expira: 09/02/2021

    Neewer Estabilizador Para Canon Nikon Sony And Other Dslr

    -Titulo Original : Neewer Aluminum Alloy Handheld Stabilizer, 24 inches/60 Centimeters with 1/4 inch Screw Quick Shoe Plate for Canon Nikon Sony and Other DSLR Camera Video DV up to 6.6 pounds/3 kilograms-Fabricante : Neewer-Descripcion Original: Compatible with Canon Nikon Sony and Other DSLR Cameras, allows high and low angle shooting // Made of aluminium alloy, durable with solid construction; 1/4 inch screw quick shoe plate with scale can move around to adjust the balance // Adjust the height of 16.34-23.6inches/41.5-60 centimeters; Load up to 6.6 pounds/3 kilograms // Especially designed to reduce shake and stabilize video on cameras and camcorders // Non-slip and comfortable foam handle gives comfortable sensation and prevents it from sliding // Style: Handheld Stabilizer is compatible with Canon Nikon Sony and Other DSLR Cameras, allows high and low angle shooting. Made of aluminium alloy, durable with solid construction. 1/4 inch screw quick shoe plate with scale can move around to adjust the balance. Especially designed to reduce shake and stabilize video on cameras and camcorders. Non-slip and comfortable foam handle gives comfortable sensation and prevents it from sliding. Specifications: Material: Aluminium Alloy Max Length: Approx. 23.6 inches/60 centimeters Min Length: Approx. 16.34 inches/41.5 centimeters Max Load: 6.6 pounds/3 kilograms 1 x Aluminum Alloy Handheld Stabilize...
  • Smallrig 860 Dslr Rig System 15mm Rod Clamp With 1/4 Thre...
    Precio:  $4,999.00

    Smallrig 860 Dslr Rig System 15mm Rod Clamp With 1/4 Thre...

    -Titulo Original : SMALLRIG DSLR Rig System 15mm Rod Clamp with 1/4 Thread Hole to Attach Camera Microphones/Sound Recorders/Lighting Equipment - 860-Fabricante : SMALLRIG-Descripcion Original: Since it is a standard 15mm rod clamp for the camera rig, it could be used on the 15mm rod system. It is possible to connect shooting accessories such as a monitor, microphone and EVF to a 15 mm rod via the 15 mm single rod clamp-860. // How to use: It is possible to connect the monitor or EVF via the 1/4" screw. Also, you can attach a 15 mm rod directly to a 15 mm rod clamp. // When the knob is blocked by other accessories can not tighten the pipe clamp, you can pull out the knob a bit, adjust the direction and then continue to tighten. // The white rubber pad on the screw is could protect your monitor or other equipment from scratch. // Package Contents: 1 x 15 mm Rod clamp (Please note: Please check size and package contents before purchasing!) // The Single Railblock Rod Clamp can be mounted on any standard 15mm rods on DSLR Rig. Comes with 1/4 thread hole: thread diameter is international standard 1/4. Material: Aluminum Allo...
  • Cabezal de trípode de camaras 360 rosca de  3/8 maximo 2 kg
    Precio:  $10,079.00

    Cabezal de trípode de camaras 360 rosca de 3/8 maximo 2 kg

    -Titulo Original : SmallRig Mini Ball Head, Tripod Head Camera 360° Panoramic with 1/4 Screw 3/8 Thread Mount and Arca-Type QR Plate Metal Ball Joint for Monopod, DSLR, Phone, Gopro, Max Load 4.4lbs/2kg - BUT2665-Fabricante : SmallRig-Descripcion Original: COMPATIBILIDAD UNIVERSA La mini cabeza de bola SmallRig cuenta con un tornillo de placa QR de rosca de 1/4 , un adaptador de tornillo de 1/4 a 3/8 y una rosca de tornillo inferior de 3/8 que es adecuada para la mayoría de las cámaras DSLR, videocámaras, trípodes, controles deslizantes, monópodos. Cabezal de trípode giratorio de 360 ​​grado Garantiza una rotación panorámica de 360 ​​° para tomas panorámicas, una inclinación frontal de -90 ° / + 45 ° y una inclinación lateral de -50 ° / + 50 ° para un ajuste de múltiples ángulos que incluye tomas horizontales y verticales. BASE DE PANORAMA DE PRECISIÓN La base de la rótula de bola SmallRig está finamente grabada con láser en incrementos de 5 ° desde ± 0 ° -330 ° para realizar un seguimiento de la panorámica progresiva, ideal para fotografías panorámicas de múltiples tomas MATERIAL DE ALEACIÓN DE ALUMINIo Hecho de aleación de aluminio, la carga máxima es de 4,4 libras / 2 kg, muy resistente y duradero. Con soporte acolchado de goma en la parte superior para proteger su cámara de posibles arañazos ALTA ESTABILIDAD El diseño de cabeza esférica de bajo perfil crea una fuerza de bloqueo más fuerte y una mayor estabilidad. La perilla de tornillo está ubicada en el costado de la bola en lugar de la parte inferior de la cabeza de la bola, lleva un 15% hacia abajo en todo el centro de gravedad de la cabeza de la bola, mejora la estabilida...
  • SMALLRIG 2013 Cage for Sony A9 Camera with Cold Shoe and ...
    Precio:  $25,169.00

    SMALLRIG 2013 Cage for Sony A9 Camera with Cold Shoe and ...

    -Titulo Original : SMALLRIG Cage for Sony A9 Camera with Cold Shoe and Rosette - 2013-Fabricante : SMALLRIG-Descripcion Original: For Sony A9:SmallRig cage 2013 is exclusively designed for Sony A9. The cage is equipped with an eyelet for the wrist strap on the top. // Cold shoe and NATO rail: The cold shoe could attach Smallrig Ball Head 1875 or 1135 for monitor or wireless video transmitter. NATO rail on the left side could be utilized to attach QR Cheese Handle 1688 for handheld shooting, or EVF Mount 1897 for monitor. // Locating points could be used to attach Magic Arm 2026 for monitor or wireless video transmitter. Rosette on the right could attach Wooden Grip 1941 for better handheld shooting experience. // Four M4 threaded holes at the bottom could mount Quick Release Plate 1710 for 15mm Rail Support System Baseplate 1687. The cage is equipped with an abundance of 1/4”and 3/8” threaded holes for more accessories. // The cage is so well designed that it does not block the camera’s buttons, ports and battery compartment etc. //...
  • Smallrig 1638 Top Handle With 1/4 3/8 Mounting Holes And ..
    Precio:  $7,949.00

    Smallrig 1638 Top Handle With 1/4 3/8 Mounting Holes And ..

    -Titulo Original : SMALLRIG Top Handle with 1/4 3/8 Mounting Holes and Cold Shoe for Video Camera Cage, Microphone Mount, LED Light, Monitor Mount - 1638-Fabricante : SMALLRIG-Descripcion Original: Equipped with arrays of 1/4"-20 and 3/8"-16 threaded holes for additional accessories // Bolts on SmallRig camera cages or other brand cages with two 1/4''-20 screws // A cold shoe mount on top, compatible with flash speed light, led video light, monitor mount, microphone mount, EVF mount, etc. // Three 1/4''-20 threads are provided for attaching rod clamps, cold shoes, magic arms etc. // Package includes: 1 * top handle, 1 hex spanner, 2 * 1/4” screws //...
  • SMALLRIG 1584 Cage for DSLR Camera for Panasonic GH5/GH4/...
    Precio:  $24,799.00

    SMALLRIG 1584 Cage for DSLR Camera for Panasonic GH5/GH4/...

    -Titulo Original : SMALLRIG Cage for DSLR Camera for Panasonic GH5/GH4/GH3, for Canon EOS 5D Mark III/80D/70D/6D/7D, for Nikon D7200/D7000/D7100, for Sony A7II/A7SII, for Fujifilm X-T2, for Sony A99-1584-Fabricante : SMALLRIG-Descripcion Original: Full-Surrounded Cage: Lightweight, and compatible with camera for Canon 60D, 70D, 80D, 50D, 40D, 30D, 6D, 7D, T5I, 7D MarkII, 5D MarkII, 5D MarkIII, 5DS, 5DS R, camera for Nikon D7000, D7100, D7200, D300S, D610, DF, camera for Sony A99, and of course almost any medium-sized DSLR on the market. Please search SmallRig 1630 for smaller size DSLR, or search SmallRig 1750 or SmallRig 1535 for larger size // Full-Access: None of the buttons are being covered by the cage, and you are able to access not only the battery but even the SD card slots // There are plenty of 1/4’’-20 and 3/8’’-16 mounting thread on the cage, which allows you to attach more accessories // Adjustable & Removeable Rod: With the cheese rod (145mm) on both sides, you can grip it as handle for handheld shooting. Also, you can remove one if you don’t need it. The back wingnut is designed to lock it quickly and conveniently // Secure the cage tightly via the bottom screw, and you can adjust the distance with the spacing of 18mm for better view // Size: of the cheese rods: 145mm of this cage: 196mm for Canon 60D, 70D, 80D, 50D, 40D, 30D, 6D, 7D, 7D MarkII, 5D MarkII, 5D MarkIII, 5DS, 5DS R, for Nikon D7000, D7100, D7200, D300S, D610, DF, for Sony A99 and most medium-sized DSLR on the market. NOT fit for smaller size DSLR camera such as: for Canon 650D, 600D, 550D, 500D, 450D, 760D, 750D, 700D, 100D, 1200D, for Nikon D3200 D3300 D5200 D5500, for Sony a58, a7, a7II, for Panasonnic GH4/GH3/GH2. We recommend Smallrig cage model 1630 (search smallrig 1630). 2x M12-145mm Cheese Rods- 1461 2x Short Arms 2x Long Arms-1643 1x Baseplate(with 1/4'' mounting screw)-1657 1x Top Plate 1x Hot Shoe Connector 2x M4 Screws 8x 1/4 Screws 2x Hex Spanners Auluminum Alloy 400...
  • SMALLRIG 1748 Top Plate for RED Raven, for RED Scarlet-W,...
    Precio:  $15,829.00

    SMALLRIG 1748 Top Plate for RED Raven, for RED Scarlet-W,...

    -Titulo Original : SmallRig Top Plate for RED Raven, for RED Scarlet-W, for RED Weapon/RED Weapon Brain with Helium 8K S35 Sensor, for RED Epic-W Brain with Helium 8K S35 Sensor - 1748-Fabricante : SmallRig-Descripcion Original: 【COMPATIBILITY】The top plate is designed for RED Raven, for RED Scarlet-W, for RED Weapon/RED Weapon Brain with Helium 8K S35 Sensor, for RED Epic-W Brain with Helium 8K S35 // 【MOUNTING POINTS】Features plenty of 1/4’’-20 threaded holes for accessories attachment, such as top handle, monitor mount // 【HEAT DISSIPATION】Fits well with your camcorder and leaves the heat dissipation available // 【WIRELESS AVAILABLE】The top plate would not affect the wireless receiving // 【HIGH QUALITY】Made of aluminum alloy, sturdy and durable // : 1. Fits well with your camera 2. Heat dissipation 3. 1/4-20 thread points 4. No interference of wireless receiving : for RED RAVEN for RED SCARLET-W for RED WEAPON / for RED WEAPON BRAIN WITH HELIUM 8K S35 SENSOR for RED EPIC-W BRAIN WITH HELIUM 8K S35 SENSOR : 1x top plate 1748 4x 1/4 screw 1x hex spanner : 98 x 76 x 12mm : 128g : 120x100x40mm : 155g : Aluminum Allo...
  • Neewer Camera Movie Video Making Rig System Film-Maker Kit..
    Precio:  $25,959.00

    Neewer Camera Movie Video Making Rig System Film-Maker Kit..

    -Titulo Original : Neewer Camera Movie Video Making Rig System Film-Maker Kit for Canon Nikon Sony and Other DSLR Cameras, DV Camcorders,Includes Shoulder Mount, Standard 15mm Rail Rod System, Matte Box (Red and Black)-Fabricante : Neewer-Descripcion Original: Affordable and practical DSLR movie rig include: (1)Shoulder Mount; (1)15mm Rail Rod System; (1)Matte box. Note: Camera is not Included // Ergonomic design gives you easy access for any angle and position adjustment, and also capable with any camera tripod or stands with industry standard: tube diameter 15mm center with distance 60mm // Matte box with adjustable top and side flags help you get rid of unwanted light in your image // Comfortable shoulder mount alleviate the pressure on your shoulder as well as aiding stabilization // Fits most Camcorders and DSLR cameras. Easy to set up and convenient to carry, this flexible DSLR rig set endeavors to give you a better filming experience // Style: Note: Camera is not included Description: DSLR rig set satisfies your basic need for video recording or film making. It comes with: Matte box, Rail rod system and a shoulder mount. Matte Box: Adjustable top and side flags help you the control of light in your lens. Get rid of unwanted stray light that will disturb your image. Height adjustment feature can meet the demand of cameras of different height. Fits 15mm rail rods. Anti-slip blue knobs to tighten. 15mm Rail Rod System: A 1/4-inch and a 3/8-inch threaded hole in case you need to set it on a tripod. Industrial rail rod made of Aluminum alloy. Comfortable and firm hand grip to ensure easy holding and better stabilization. Aluminum knobs for long lasting tightening and screwing. Partially rubber padded mounting plate with 1/4-inch screw to fit most cameras. Shoulder Mount: Help alleviate the pressure on your shoulder. Enhance stabilization when filming. No matter you're new or veteran in filming, the rig can save so much time and energy for you. Easy to set up and take with you, this flexible DSLR rig set endeavors to give you a better filming experience. Specification: Material: Aluminum, ABS, Plastic Rail C-to-C Distance: 60mm Fit Rail Diameter: 15mm Screw Thread: 1/4-inch Package Contents: 1 x 15mm Rail Rod System 1 x Shoulder Mount 1 x Matte Bo...
  • SMALLRIG 1549 Single 15mm Rail Clamp Mount Rod Clamp with...
    Precio:  $5,289.00

    SMALLRIG 1549 Single 15mm Rail Clamp Mount Rod Clamp with...

    -Titulo Original : SMALLRIG Single 15mm Rail Clamp Mount Rod Clamp with Long Hole on Plate/Cage/Handle for Rod Extension - 1549-Fabricante : SMALLRIG-Descripcion Original: SMALLRIG Single 15mm Rail Clamp 1549 // This single rail clamp can be mounted on a plate/cage/handle for rod extension. // Connect your dslr rigs by utilizing the long hole and screws.(Screws are included.) // This single rail clamp can be mounted on a plate/cage/handle for rod extension. 1 x single 15mm rail clamp mount 2 x connection screws 1 x hex spanne...
  • SMALLRIG Mini Cable Clamp for Tethering Cables (2 un.)
    Precio:  $3,879.00

    SMALLRIG Mini Cable Clamp for Tethering Cables (2 un.)

    -Titulo Original : SMALLRIG Mini Cable Clamp for Tethering Cables (2 pcs) BSC2335 -Fabricante : SMALLRIG -Descripcion Original: Easy installation product // Toner cartridge will provide outstanding Print quality for all types of photos and documents // This product is manufactured in China // Okidata 46484103 Cyan image drum 30K for C532 MC573. Easy installation product. Toner cartridge will provide outstanding print quality for all types of photos and documents. This product is manufactured in China...
  • SMALLRIG 2192 Handle Accessories for Sony FS5 w/Rosette Q...
    Precio:  $24,869.00

    SMALLRIG 2192 Handle Accessories for Sony FS5 w/Rosette Q...

    -Titulo Original : SMALLRIG Handle Accessories for Sony FS5 w/Rosette Quick Release Anti- Off Design Extension Cable - 2192-Fabricante : SMALLRIG-Descripcion Original: FOR SONY FS5 HANDLE: Designed to convert the original FS5 peculiar handgrip connector into universal rosette for Arri standard so that the Extension Arm 1870 could be attached for better shoulder shot // EASY INSTALLATIONS: Align two white points on the handgrip and the adapter, then rotate in the direction indicated. Last, tighten the knob. The installation make it easier to assemble and disassemble // ANTI-OFF DESIGN: The anti-off design ensure the adapter locked on the handle // EXTENTION CABLE: Include a 2.5mm extension cable which is 39" long extended // NOTE: The Handgrip adapter can’t solve the problem that the side grip itself has small play/wiggle in it // 1. Designed to convert the original FS5 handgrip into standard Arri rosette. 2. Anti-off designed to ensure safe. 3. Features a mark on it to prevent installation error. 4. Using a knob to lock it tightly and quick release your setup. 5. Include a 2.5mm extension cable which is 39 long extended. for Sony FS5 1 x Handgrip Adapter 1 x 2.5mm Extension Cable 69 X 69 X 23mm 105 X 95X 30mm 108g 135g Aluminum Allo...
  • Smallrig 1950 G85/G80 Cage with Built-in Cold Shoe and NA...
    Precio:  $25,549.00

    Smallrig 1950 G85/G80 Cage with Built-in Cold Shoe and NA...

    -Titulo Original : SmallRig G85/G80 Cage with Built-in Cold Shoe and NATO Rail for Panasonic Lumix DMC-G85/G80-1950-Fabricante : SMALLRIG-Descripcion Original: It's a specially designed cage for Panasonic Lumix DMC-G85/G80, the body of the cage comes with many 1/4" and 3/8" mounting holes for more accessories // Strengthening protection and stability and providing accessory mounting options, this cage helps your Panasonic G85/G80 camera for video production // With the camera in the cage, you still have access to the SD card slot, battery compartment, and all camera controls, so you won't have to waste time removing the camera from the cage during a shoot // Two built-in cold shoes mount on the top for attaching small and light accessories, such as microphone, monitor mountings, etc. So you can attach a microphone bracket ( SmallRig 1859 ) via the cold shoe; NATO rails on the top and at the side ensure the access to mount NATO handles, EVF mount and other NATO compatible rigs, so you can use our NATO grip ( SmallRig 1955, SmallRig 1995, SmallRig 2027 )on this cage by the nato rail on the top side // This cage leaves enough space to mount HDMI cable clamp 1822 to protect the camera HDMI port //...
  • SMALLRIG 1906 Mini Mounting Plate w/Single 15mm Rod Clamp...
    Precio:  $9,649.00

    SMALLRIG 1906 Mini Mounting Plate w/Single 15mm Rod Clamp...

    -Titulo Original : SMALLRIG Mini Mounting Plate w/Single 15mm Rod Clamp 1/4 3/8 Thread - 1906-Fabricante : SMALLRIG-Descripcion Original: A simple plate with various functions, compatible with any industry standard 15mm rod // Features two cold shoes, allows to attach microphone, wireless receiver or articulating arm // Equipped with several 1/4’’-20 & 3/8’’-16 threads for additional accessories attachment // Screw groove is designed to help adjust the balance/gravity centre while you mount this item on the monitor or viewfinder // Lightweight, weighs only 0.16lb. Made of aluminum alloy, sturdy and durable // 5 or 7 monitor, flashlight, microphone, articulating arm : 1 x Mini Mounting Plate with Single 15mm Rod Clamp : 80x33x35mm : 71g : 140x160x40mm : 90g : Aluminum Allo...
  • Smallrig 2157 Universal Magic Arm With Small Ballhead 215..
    Precio:  $2,509.00
    Expira: 08/02/2021

    Smallrig 2157 Universal Magic Arm With Small Ballhead 215..

    -Titulo Original : SmallRig Universal Magic Arm with Small Ballhead 2157-Fabricante : SMALLRIG-Descripcion Original: ADJUST ALL ANGLES: Features a wingnut in the middle to adjust the angles and positions of monitor or video light or other accessories. It supports rotation of any angles // LOCK TIGHT: Tightened with a wingnut quickly and conveniently. It is easy to use and can help you lock tightly. Needn't worry about dropping // 1/4 SCREWS: Equipped with 1/4" screws at both ends. It could attach camera cage, top plate and Top Handle 1955/1984 on the one end, while attach monitor or video light on the other end // SMALLER MODEL: This is the smaller model of SMALLRIG Magic Arm with Small Ballhead 2163. If you need a bigger one, please check the SMALLRIG 2163 // Not recommend for monitor or LED light over 1.0 kg // Color: SmallRig Universal Magic Arm with Small Ballhead 2157 is equipped with 1/4” screws at both ends. It could attach camera cage, top plate and Top Handle 1955/1984 on the one end, while attach monitor or video light on the other end. It features a wingnut in the middle to adjust the angles and positions of monitor or video light or other accessories. Compatibility: Universal Material(s): Aluminum Alloy Product Dimensions: 72.5x30x18 mm Net Weight: 32 g Package Size: 81x41x20 mm Package Includes: 1 x Magic Arm 215...
  • Bracket Holder Para Camara Sony A7III
    Precio:  $18,849.00

    Bracket Holder Para Camara Sony A7III

    -Titulo Original : YC - Soporte de placa para Sony A7II A7III A7RII A7RIII A7SII A9-Fabricante : YC-Descripcion Original: Tipo de batería: Li-ion; Capacidad: 5700 MAH; Celdas: 4 celdas; Voltaje: 7,4 V. Las celdas de grado A garantizan cargas rápidas y un bajo consumo de energía; La protección de circuito incorporada garantiza seguridad y estabilidad. Aluo nuevas baterías de alta calidad, 100% nuevas del fabricante. Hasta 500 ciclos de recarga durante la vida útil de la batería El diseño compacto y el recorte preciso se adaptan perfectamente a su computadora portátil como la original...
  • Neewer Aluminum Alloy 64 inches/162 Centimeters Camera...
    Precio:  $23,499.00

    Neewer Aluminum Alloy 64 inches/162 Centimeters Camera...

    -Titulo Original : Neewer Aluminum Alloy 64 inches/162 Centimeters Camera Travel Tripod Monopod with 360 Degree Ball Head,1/4 inch Quick Shoe Plate and Bag for DSLR Camera Video Camcorder up to 26.5 pounds/12 kilograms-Fabricante : Neewer-Descripcion Original: SOLID CONSTRUCTION: Made of Aluminum Alloy, durable and solid // 2-IN-1 TRIPOD: Can be used as monopod and converted into alpenstock when removing one leg // HEIGHT AND LOAD CAPACITY: Extended to 63.8 inches/162 centimeters, folded to 18 inches/46 centimeters; Four sections adjustable-height leg tubes with adjustable center column; Max load weight is 26.5 pounds/12 kilograms for optimal performance // STABILITY: Center column can be attached to sand bag to increase stability, which is designed with hook; Non-slip feet design keeps the tripod steady on virtual ground surface // PANORAMIC VIEW: 360 degree swivel ball head with bubble level provide you with a panoramic view; 3 position leg angle adjustment system provides flexible shooting; Carrying bag can prevent the product from damage // Style: Note: Camera is not included Description: This Tripod Monopod is made of aluminum alloy, which is durable and solid enough. It can be used as monopod and converted into alpenstock when removing one leg. And it can achieve greater performance and maintain image quality for cropping larger picture sizes. It has four sections adjustable-height leg tubes with adjustable center column. Center column can be attached to sand bag to increase stability, which designed with hook; And its non-slip feet design keeps the tripod steady on virtual ground surface. 360 degree swivel ball head with bubble level provide you with a panoramic view. 3 position leg angle adjustment system provides flexible shooting. Besides, the carrying bag can prevent the product from damage. Specifications: Material: Aluminum Alloy Color: Red + Black Load Capacity: 26.5 lbs/12 kg Net Weight: 3.75 lbs/1.7 kg Maximum Height: 63.8/162 cm Minimum Height: 18/46 cm Package Contents: 1 x Aluminum Alloy Tripod Monopod 1 x Carrying Ba...
  • SMALLRIG 1104 15mm Rail Block Rod Clamp Vertical Mount fo...
    Precio:  $4,669.00

    SMALLRIG 1104 15mm Rail Block Rod Clamp Vertical Mount fo...

    -Titulo Original : SMALLRIG 15mm Rail Block Rod Clamp Vertical Mount for 15mm DSLR Rig System – 1104-Fabricante : SMALLRIG-Descripcion Original: The rod clamp is designed to work with standard 15mm rods and this rod clamp allows you to vertically mount two 15mm rods (90 degree) // The spring ratchet wingnut is to tighten the rod and re-position in narrow spots where you’re not able to fully turn them // Compatible with any standard 15mm rods // Made of Aluminum alloy, sturdy and durable // Lightweight, weighs only 0.09lb // SmallRig 15mm Rail Block Rod Clamp Mount 90 Degree Vertical for 15mm DSLR Rig System, Knob / Wingnut – 1104 standard 15mm rods vertical/90 degree blac...
  • Bracket Holder Para Camara Canon (xam)
    Precio:  $12,779.00

    Bracket Holder Para Camara Canon (xam)

    -Titulo Original : iShoot CNC Machined Universal L-shaped Vertical Quick Release Plate Camera Grip Bracket Holder Compatible with Canon Nikon Pentax Olympus DSLR Camera and ARCA-SWISS Fit Ball Head-Fabricante : iShoot-Descripcion Original: Soporte de agarre de cámara de placa de liberación rápida vertical universal en forma de L mecanizado por CNC para cámara Canon Nikon Sony Pentax Olympus DSLR Compatible con cabezal de bola de ajuste ARCA-SWISS; Hecho de aluminio de aviación, mecanizado CNC con precisión, tratamiento de superficie anodizado, diseño de cuerpo único, todos los tornillos son de acero inoxidable; La longitud es de aproximadamente 116 mm, el ancho es de aproximadamente 50 mm, la altura es de aproximadamente 80 mm y el peso es de aproximadamente 100 g; 【2】 Parte inferior con diseño deslizante, el recorrido transversal del tornillo de acero inoxidable para fijar la cámara es de aproximadamente 12.8 mm, el recorrido longitudinal es de aproximadamente 15.8 mm; se puede adaptar a la posición de los orificios para tornillos de la mayoría de la cámara; 【3】 La parte inferior diseñada con una paleta desmontable, fijada por tornillos, se puede instalar a ambos lados de la placa de liberación rápida de acuerdo con el ancho y la forma de la parte inferior de la cámara, para aumentar el área de contacto; 1/4 El orificio del tornillo está reservado en el lateral para la extensión externa, también desempeña un papel en el refuerzo; 【4】 Con interfaz AS estándar de 39 mm, además de soportar la cabeza esférica KS-0 / KS-1 (necesita desmontar un tornillo de placa lateral), IS-QJ64 / JZ50, etc., también compatible con RRS / ARCA-SWISS / KIRK / Wimberley / MARKINS / SUNWAYFOTO / kangrinpoche / BENRO / SIRUI cabeza esférica de la interfaz estándar AS. 【5】 Aviso: 1. Sin cámara con empuñadura de batería y sin ILDC; 2. Algunas cámaras no pueden usar el cable remoto cuando se usa esta placa IS-TY-PLUS...
  • SMALLRIG 851 Pack x 2  15mm Carbon Fiber Rod 30cm 12 inch...
    Precio:  $8,069.00

    SMALLRIG 851 Pack x 2 15mm Carbon Fiber Rod 30cm 12 inch...

    -Titulo Original : SMALLRIG 15mm Carbon Fiber Rod 30cm 12 inch, Pack of 2-851-Fabricante : SMALLRIG-Descripcion Original: It is the new version of carbon fiber rod with the more smooth surface. // It fits 15mm rod clamp but its surface is not shiny anymore because we have redesigned it based on some customers' advice. // The carbon fiber rods are much lighter than stainless steel rods, but carbon fiber rods are incredibly rigid and durable. // Standard 15mm, can be used with 15mm rod clamp, follow focus, matte box, and so on. // Weight: only 37g; Package includes: 2 x carbon fiber rod. Please note that the carbon fiber rods do not feature female thread // Size: 74g (2pcs)Carbon Fibe...
  • Smallrig 2156 Hdmi Cable Clamp For Fuji X-h1 And Fuji X-t..
    Precio:  $7,449.00

    Smallrig 2156 Hdmi Cable Clamp For Fuji X-h1 And Fuji X-t..

    -Titulo Original : SMALLRIG HDMI Cable Clamp for Fuji X-H1 and Fuji X-T2 Cage 2156-Fabricante : SMALLRIG-Descripcion Original: ▶ For Fuji X-H1 and Fuji X-T2: Designed to protect the HDMI port of Fuji X-H1 and Fuji X-T2 camera. // ▶ Strong and Sturdy: Made of CNC machined aluminum, anodized finish. // ▶ Easy to Use: Mounts to the SMALLRIG camera cage and lock the HDMI cable connector with two screw. // ▶ Protect HDMI port: Provides strain relief for HDMI cable where frequent tugging could cause damage to the camera's HDMI port. // ▶ HASSLE-FREE WARRANTY: At SMALLRIG, not only we offer high quality products,we back them up with 18-month warranty and a 30-day money back guaranty // A professional company specializing in camera accessories. A comprehensive enterprise integrating product design, research and development, sales and maintenance of camera accessories. Products are sold in the United States, China, Germany, France, Japan, Canada, Australia and other countries. We take high-quality products as the core and excellent customer service as our tenet. is designed to protect the HDMI port of Fuji X-H1 and Fuji X-T2 camera. It is fixed on the cage by two M4 screws to ensure stability and it prevents the HDMI cable from accidental removal.1.Designed to protect the HDMI port of Fuji X-H1 and Fuji X-T2 camera2.Unobstructed screen tilt.Fuji X-H1 cage 2123Fuji X-H1 cage (with Battery Grip) 2124Product Dimensions: 60 X 34 X 18mmPackage Dimensions:96 X 65 X 28mmNet Weight: 30gMaterial(s): Aluminum Alloy1 x HDMI Cable Clamp 21562 x M4 Screw1X hex spannerAt SMALLRIG, not only we offer high quality products,we back them up with 18-month warranty and a 30-day money back guarant...
Mostrar del 1 al 24 (de 297 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]