Arriba

Accesorios para Cámaras > Soportes y Estabilizadores > Estabilizadores para Cámaras

Mostrar: 
Mostrar del 1 al 24 (de 342 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • SMALLRIG 1872 Pack x 2  15mm Carbon Fiber Rods – 6 Inches...
    Precio:  $2,943.00

    SMALLRIG 1872 Pack x 2 15mm Carbon Fiber Rods – 6 Inches...

    -Titulo Original : SMALLRIG 15mm Carbon Fiber Rods – 6 Inches for 15 mm Rod Support System (Non-Thread), Pack of 2-1872-Fabricante : SMALLRIG-Descripcion Original: Compatible with 15mm rod support system // HIGH PERFORMANCE: The 15mm carbon fiber rod has good heat resistance, corrosion, rubbing performance // SMOOTH COATING: The smooth surface makes your installation more conveniently and comfortably // LIGHTWEIGHT: Weighs only 35g, lighter than traditional stainless-steel rods // LENGTH: 6 inches (15cm) long. If you need a longer rod, 15mm Carbon Fiber Rod - 20cm 8inch - 870 and 15mm Carbon Fiber Rod - 30cm 12inch - 851 will be recommended //...
  • SMALLRIG 2031 Cage for Sony A7II/A7SII/A7RII Camera with ...
    Precio:  $27,341.00

    SMALLRIG 2031 Cage for Sony A7II/A7SII/A7RII Camera with ...

    -Titulo Original : SMALLRIG Cage for Sony A7II/A7SII/A7RII Camera with Battery Grip (Sony VGC2EM/Sony VELLO BG-S3) – 2031-Fabricante : SMALLRIG-Descripcion Original: The cage is exclusively designed for Sony A7II/ A7SII/ A7RII with battery. The battery grip is compatible with Sony VGC2EM and VELLO BG-S3, it can effectively increase working time and prolong the service life of battery // 【For Arca system】Comes with a baseplate for Arca Swiss standard and locks tightly with the latch on the bottom, allow to easily assemble and disassemble your camera // 【More options】The cage comes with a bunch of thread for you to attach more accessories, such as 1/4’’-20 and 3/8’’- 16 threaded holes, 3/8’’ locating holes for Arri standard // 【Full accessibility】The cage would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot // 【Recommendations】Mount SmallRig Monitor Support 2026 for monitor on the locating points. Cold shoe mount could be attached with SmallRig Shoe Adapter 761 for monitor. Meanwhile, the NATO rail on the left side could be mounted with a SmallRig NATO handle 1688 for better handheld shooting. To protect your HDMI cable, you can choose SmallRig HDMI Cable 1679 to prevent cable from accidentally falling off //...
  • SMALLRIG 2014 Camera Cage for Sony Alpha A7 II/A7R II/A7S...
    Precio:  $30,433.00

    SMALLRIG 2014 Camera Cage for Sony Alpha A7 II/A7R II/A7S...

    -Titulo Original : SMALLRIG Camera Cage for Sony Alpha A7 II/A7R II/A7S II Mirrorless Digital Camera with Top Handle and HDMI Cable Lock - 2014-Fabricante : SMALLRIG-Descripcion Original: 【A CAGE KIT】The cage kit is an assembly of the Cage 1982, top handle 1638 and HDMI Cable Clamp 1679 // 【HIGH CUSTOMIZATION】The cage 192 is designed for Sony Alpha A7 II/A7R II/A7S II, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot // 【TOP HANDLE】Attached to the cage via two 1/4’’ screws, the top handle 1638 features multiple mounting points and a cold shoe base for accessory attachment // 【HDMI CABLE LOCK】The HDMI lock 1679 is to help tighten the HDMI cable for stable data transmission and prevent from accidentally dropping // 【PERFECT PROTECTION】secured tightly via the 1/4’’ screw on the bottom and it is equipped with joints for shoulder straps and wrist straps to ensure the safety of the kit while shooting //...
  • SMALLRIG 1568 Bridge Plate for RRS B2-LR-II Clamp, Bridge...
    Precio:  $3,559.00

    SMALLRIG 1568 Bridge Plate for RRS B2-LR-II Clamp, Bridge...

    -Titulo Original : SMALLRIG Bridge Plate for RRS B2-LR-II Clamp, Bridge Between for Manfrotto and for Arca Swiss - 1568-Fabricante : SMALLRIG-Descripcion Original: SmallRig 2012 is an updated camera cage, exclusively designed for BMPCC cameras, with all access to all buttons, ports and battery port of camera. The grip part has been thickened so as to offer a better holding experience for the cameraman. // Nato Rail and Built-in QR Plate for Arca standard clamp - nato rail at the side of the camera could attach QR cheese handle (SmallRig 1688) and EVF mount (SmallRig 1594). Quick release plate for Arca standard clamp at the bottom is accessible to rail support system baseplate (SmallRig 1687). // M4-0.7 threaded holes on the cage is compatible with HDMI Cable Clamp 1521 (not included). // 1/4’’ and 3/8’’ Threaded holes to help attach more accessories, such as camera handle, articulating rosette arm, hot shoe mount. 1/4’’ threaded holes at the bottom could attach Manfrotto quick release plates, such as dovetail for manfrotto standard clamp (SmallRig 1280, SmallRig 1647). // Easy to Use - the cage could be connected to the camera via 1/4’’ screws. Two holes on the side are for shoulder straps, so that you could carry it wherever you want. // 1.Grip part has been thickened for better holding experience 2.NATO rail to attach QR Cheese Handle and EVF support 3.Quick release plate for Arca standard clamp included 4.M4*0.7 threaded holes is compatible with HDMI Cable Clamp 1521 5.Two M5 screws could secure HDMI cable 6.Cold shoe included 7.1/4’’ threaded holes on the right side could attach 15mm micro rod BMPCC 2 x 1/4’’ Screw 2 x M5 Screw 1 x Hex Spanner 143.2 x 84 x 52mm 269g 170 x 125 x 70mm Aluminum Allo...
  • Smallrig 2285 Removable Counterweight Threaded Weight(200...
    Precio:  $2,851.00

    Smallrig 2285 Removable Counterweight Threaded Weight(200...

    -Titulo Original : SMALLRIG Removable Counterweight Threaded Weight(200g/0.44lb) for Balancing DJI Ronin S and Zhiyun Gimbal Stabilizer - 2285-Fabricante : SMALLRIG-Descripcion Original: Designed for balancing your camera on Gimbal Stabilizers by adjusting it’s quantity and position // Compatible with SMALLRIG Counterweight Mounting Plate 2283/2287 and SMALLRIG BMPCC4K Camera Counterweight 2274 // Screw in counterweights and balance your Gimbal Stabilizer // Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight // Package includes: 200g/0.44lb X 1 pcs // 1.For balancing your camera on Gimbal Stabilizers by adjusting it’s quantity and position. 2.Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight. 3.200g Counterweight, 1.46”in diameter. SmallRig Counterweight Mounting Plate for Zhiyun Weebill Lab Gimbal BSS2283 SmallRig Counterweight Mounting Plate for Zhiyun Weebill Lab/Crane2 BSS2277 SmallRig BMPCC4K Camera Counterweight Mounting Clamp for DJI RoninS and Zhiyun Weebill Lab/Crane series Gimbals BSS2274 1 x Counterweight 37X37X30.3mm 76X63X40mm 200g 210g Stainless stee...
  • Neewer Portable Camera Movie Video Making System with...
    Precio:  $13,974.00

    Neewer Portable Camera Movie Video Making System with...

    -Titulo Original : Neewer Portable Camera Movie Video Making System with Camera/Camcorder Mount Slider, Soft Rubber Shoulder Pad and Dual-Hand Handgrip for All DSLR Video Cameras and DV Camcorders Red-Fabricante : Neewer-Descripcion Original: Practical and economical DSLR movie System includes:(1)Shoulder Mount+(1)15mm Rail Rod System+(1)Dual-hand Handgrip // Lightweight and Portable for mobile film-making,Capturing Stable Smooth Sweeping Videos // Durable rail rod system to hold your camera and enables mounting of tripod with 1/4" or 3/8" screw thread (Rail Rod diameter 15mm,center distance 60mm) // The Shoulder Mount with soft rubber pad alleviate the pressure on your shoulder as well as aiding stabilization // Customized design for adding/replacing component(s) as your willing to meet your personal filming needs in specialized occasions // Color: NOTE: Camera not included Description Neewer Aluminum Alloy DSLR Movie Video Making System ,Guaranteed for Continuous Horizontal Filming For All DSLR Video Cameras and DV Camcorders Color:Red Shoulder Mount Help alleviate the pressure on your shoulder. Enhance stabilization when filming. 15mm Rail Rod System A 1/4 and a 3/8threaded hole in case you need to set it on a tripod. Industrial rail rod made of good quality of Aluminum alloy. Comfortable and firm hand grip to ensure easy holding and better stabilization. Aluminum knobs for long lasting tightening and screwing. Partially rubber padded mounting plate with 1/4 screw to fit most cameras. Package Contents 1x Shoulder Mount 1x 15mm Rail Rod System Dual-hand Handgri...
  • Smallrig 1894 Cage Kit For Sony A7ii/a7rii/a7sii Camera W...
    Precio:  $34,554.00

    Smallrig 1894 Cage Kit For Sony A7ii/a7rii/a7sii Camera W...

    -Titulo Original : SMALLRIG Cage Kit for Sony A7II/A7RII/A7SII Camera with Cage, Handle, HDMI Lock, Cold Shoe, Quick Release Safety Rail, Double Ball Head - 1894-Fabricante : SMALLRIG-Descripcion Original: The camera kit 1894 is designed for Sony A7II / A7RII / A7SII Camera, which perfectly matches to your camera without obstructing camera buttons and dials. The kit is easy to install and could be applied to handheld motion, shoulder support or tripod system. // The A7II A7RII A7SII cage kit comes with 6 parts: a camera cage, a nato top handle, a nato rail, a shoe-mounted double ballhead mount, a cold shoe, and an HDMI micro cable clamp (1679). An abundance of 1/4 and 3/8 thread holes work for additional accessories. // Built-in cold shoe mount, 1/4 and 3/8 threaded mounting holes on cage allow attaching many other camera accessories, such as mount flashlight, microphone, monitor, recorder. Besides, the cage can be separated as a half cage according to your needs. // Equipped with the NATO HANDLE, it is simpler and faster to remove the handle from the cage without using screws. What's more, you could adjust the handle position according to the weight of your devices. // Also, you can mount another SmallRig cold shoe 1241 on the left side for accessories attaching according to your need. // : 1. Compact and simplified structure 2. Quick and easy attachment and detachment 3. Supports handheld, shoulder or tripod system : For Sony A7II Camera For Sony A7SII Camera For Sony A7RII Camera : 1 x Cage for SONY A7II/A7RII/A7SII (1660) 1 x QR Cheese Handle (1649) 1 x HDMI Micro Cable Lock for SONY A7II/A7RII/A7SII (1679) 1 x Cold Shoe (1241) 1 x Quick Release Safety Rail - 7cm (1195) 1 x Double BallHead with shoe mount (1135) 3 x Hex Spanner : 149x197x145mm : 793g : 166x155x84mm : 865g : Aluminum Allo...
  • Smallrig 2287 Tabletop Tripod, Aluminum Alloy Mini Deskto...
    Precio:  $9,070.00

    Smallrig 2287 Tabletop Tripod, Aluminum Alloy Mini Deskto...

    -Titulo Original : SMALLRIG Tabletop Tripod, Aluminum Alloy Mini Desktop Tripod Stand Holder with 360 Degree Ball Head and Lightweight and Portable Design for DSLR SLR Camera/Phone/Android Phone/GoPro(Black)- 2287-Fabricante : SMALLRIG-Descripcion Original: 【Aluminum Alloy Material】: This tabletop tripod is made of premium aluminum alloy material which makes it more sturdy and durable, not break easily. // 【360° Ball Head】: The adjustable ball head of the desktop tripod allows the camera, smartphone etc to adjust to the proper angle, which is sturdy and not loose easily. // 【Antiskid Rubber Footpads】: Antiskid rubber footpads design keeps the travel tripod to achieve perfect stability when use it. // 【Quick Release】:Features a standard Arca QR plate with 1/4”screw to achieve quick loading and releasing. // 【Lightweight & Portable】:The mini tripod weighs only 405g and 230mm tall. It is compact and easy to store in your backpack or handbag wherever you go. //...
  • SMALLRIG 1530 Battery Mounting Plate for Red Epic/Scarlet...
    Precio:  $7,184.00

    SMALLRIG 1530 Battery Mounting Plate for Red Epic/Scarlet...

    -Titulo Original : SMALLRIG Battery Mounting Plate for Red Epic/Scarlet Camera - 1530-Fabricante : SMALLRIG-Descripcion Original: This battery mounting plate directly attaches to back of Epic and Scarlet Brain only. // Compatible with Anton Bauer QRC, Switronix, RED, Blueshape, IDX. // Material(s): Aluminum Alloy //...
  • Smallrig 1855 Mini Quick Release Plate for LCD Monitors, ...
    Precio:  $7,635.00

    Smallrig 1855 Mini Quick Release Plate for LCD Monitors, ...

    -Titulo Original : SmallRig Mini Quick Release Plate for LCD Monitors, Magic Arm, LED Light, EVF Mounts, Monitor - 1855-Fabricante : SMALLRIG-Descripcion Original: This DSLR quick release plate and mount designed for most 1/4" gear. It is made up of two parts, a male and a female dovetail plate. It provides quick released functionality between cameras and accessories // Quick release design for attaching magic arm, HDMI splitter, LED light, flash, LCD monitor to your rig // Securely locking mechanism; precisely engineered, black anodized, against corrosion and abrasion // More convenience to fix the quick release plate to monitor and avoid occassionally disassembling it // Made of aluminum and stainless steel, solid and sturdy //...
  • Bracket Holder Para Camara Canon (xam)
    Precio:  $7,405.00

    Bracket Holder Para Camara Canon (xam)

    -Titulo Original : iShoot CNC Machined Universal L-shaped Vertical Quick Release Plate Camera Grip Bracket Holder Compatible with Canon Nikon Pentax Olympus DSLR Camera and ARCA-SWISS Fit Ball Head-Fabricante : iShoot-Descripcion Original: Soporte de agarre de cámara de placa de liberación rápida vertical universal en forma de L mecanizado por CNC para cámara Canon Nikon Sony Pentax Olympus DSLR Compatible con cabezal de bola de ajuste ARCA-SWISS; Hecho de aluminio de aviación, mecanizado CNC con precisión, tratamiento de superficie anodizado, diseño de cuerpo único, todos los tornillos son de acero inoxidable; La longitud es de aproximadamente 116 mm, el ancho es de aproximadamente 50 mm, la altura es de aproximadamente 80 mm y el peso es de aproximadamente 100 g; 【2】 Parte inferior con diseño deslizante, el recorrido transversal del tornillo de acero inoxidable para fijar la cámara es de aproximadamente 12.8 mm, el recorrido longitudinal es de aproximadamente 15.8 mm; se puede adaptar a la posición de los orificios para tornillos de la mayoría de la cámara; 【3】 La parte inferior diseñada con una paleta desmontable, fijada por tornillos, se puede instalar a ambos lados de la placa de liberación rápida de acuerdo con el ancho y la forma de la parte inferior de la cámara, para aumentar el área de contacto; 1/4 El orificio del tornillo está reservado en el lateral para la extensión externa, también desempeña un papel en el refuerzo; 【4】 Con interfaz AS estándar de 39 mm, además de soportar la cabeza esférica KS-0 / KS-1 (necesita desmontar un tornillo de placa lateral), IS-QJ64 / JZ50, etc., también compatible con RRS / ARCA-SWISS / KIRK / Wimberley / MARKINS / SUNWAYFOTO / kangrinpoche / BENRO / SIRUI cabeza esférica de la interfaz estándar AS. 【5】 Aviso: 1. Sin cámara con empuñadura de batería y sin ILDC; 2. Algunas cámaras no pueden usar el cable remoto cuando se usa esta placa IS-TY-PLUS...
  • SMALLRIG 1409 Quick Release Safety Rail 4cm 1.57 Inches L...
    Precio:  $2,354.00

    SMALLRIG 1409 Quick Release Safety Rail 4cm 1.57 Inches L...

    -Titulo Original : SmallRig Quick Release Safety Rail 4cm 1.57 Inches Long with 1/4 Screws - 1409-Fabricante : SmallRig-Descripcion Original: SmallRig 1409 is a 46mm standard quick release safety rail, which can serve as part of quick release nato handle. // The spring-loaded pin on each end of the rail prevents accidental accessory detachment. // Compatible with all the accessories with standard nato clamp or 1/4" threaded, such as with nato handle, slide mount, Camera for RED Epic/Scarlet, for Black Magic and other third party accessories. // It can be attached to any two 1/4-20 holes via (2) 1/4-20 screws (included) to provide a mount for QR-Handles, EVF mount, nato clamp, and so on. // Includes: 1 x 4cm safety rail, 1 x hex spanner, 2 x 1/4'' screw. Material(s): Aluminum Alloy // Size: 1. It could attach the cage with 1/4’’-20 threaded holes via two 1/4’’ screws. 2. It could attach NATO handle via NATO rail. 3. Spring-loaded pin on each end of the rail prevents accidental removal. 4. It is small, lightweight and durable. Universal 1 x 46mm NATO Rail 1 x Hex Spanner 4 x 1/4 Screw 45x20x12 mm 38g 110x130x40 mm Aluminum Allo...
  • SMALLRIG 1854 Rosette Side Plate for BlackMagic URSA Mini...
    Precio:  $13,817.00

    SMALLRIG 1854 Rosette Side Plate for BlackMagic URSA Mini...

    -Titulo Original : SMALLRIG Rosette Side Plate for BlackMagic URSA Mini, URSA Mini Pro Camera- 1854-Fabricante : SMALLRIG-Descripcion Original: SmallRig Side Plate for Blackmagic URSA Mini Camera 1854 is specially designed for Blackmagic URSA Mini Camera // A cold shoe mount is designed for microphone, wireless receiver or light monitor mounting attachment // An rosette is provided for ARRI standard accessories, like URSA mini original handle or SMALLRIG dogbone Rosette Arm 1666 // Besides, the well-designed NATO rail makes it easier to mount NATO handle and EVF mount 1594 for monitor // It comes with many 1/4'' and 3/8'' threaded Holes for accessories according to your needs // : 1.Multi-functional and form-Fitting 2.Fits well with the camera 3.Easy to attach and detach 4.A NATO rail and a shoe mount 5.standard rosette for adjustable handgrip 6.1/4 and 3/8 mounting Holes for Blackmagic URSA Mini camera : 1x 1854 side plate 2x standard rosette 1x M6 screw 8x M2 screw 1x Hex spanner : 96x90x10mm : 168g : 137.5x105x51mm : 225g : Aluminum Allo...
  • Smallrig 2175 Top Handle Adapter for Handle 1955/1983/198...
    Precio:  $3,348.00

    Smallrig 2175 Top Handle Adapter for Handle 1955/1983/198...

    -Titulo Original : SMALLRIG Top Handle Adapter for SMALLRIG Handle 1955/1983/1984/1979/2000-2175-Fabricante : SMALLRIG-Descripcion Original: It's a specially designed cage for Panasonic Lumix DMC-G85/G80, the body of the cage comes with many 1/4" and 3/8" mounting holes for more accessories // Strengthening protection and stability and providing accessory mounting options, this cage helps your Panasonic G85/G80 camera for video production // With the camera in the cage, you still have access to the SD card slot, battery compartment, and all camera controls, so you won't have to waste time removing the camera from the cage during a shoot // Two built-in cold shoes mount on the top for attaching small and light accessories, such as microphone, monitor mountings, etc. So you can attach a microphone bracket ( SmallRig 1859 ) via the cold shoe; NATO rails on the top and at the side ensure the access to mount NATO handles, EVF mount and other NATO compatible rigs, so you can use our NATO grip ( SmallRig 1955, SmallRig 1995, SmallRig 2027 )on this cage by the nato rail on the top side // This cage leaves enough space to mount HDMI cable clamp 1822 to protect the camera HDMI port //...
  • Neewer Film Movie Video Making System Kit For Canon N
    Precio:  $36,035.00

    Neewer Film Movie Video Making System Kit For Canon N

    -Titulo Original : Neewer Film Movie Video Making System Kit for Canon Nikon Sony and Other DSLR Cameras Video Camcorders, Includes C-Shaped Bracket,Handle Grip,15mm Rod,Matte Box,Follow Focus,Shoulder Rig (Red+Black)-Fabricante : Neewer-Descripcion Original: PACKAGE INCLUDES: (1)C-shape bracket, (1)Top Handle Grip, (2)15mm Rod, (1)Matte Box, (1)Follow Focus, (1)Shoulder Rig, (1)2.5 pounds/1.1 kilograms Counter Weight; This film movie system kit plays supporting and helpful role in assisting moving shooting, which can achieve better movie effect // C-SHAPE BRACKET WITH HAND GRIP: This C-shape bracket with a top handle grip can easily transform your rig into a handheld rig, greatly boost the portability of your devices; Counter Weight specially designed for balancing your shoulder mount rig // MATTE BOX: Adjustable height (up to 45mm) according to the lens of camera on the rail rod system; Also works with standard 15mm rails, center-to-center rails distance 60mm // FOLLOW FOCUS: Shoot with variety of options, such as shooting with DSLR camera, video, camcorder and so on. It provides repeatable and accurate focusing, which makes you shoot precisely, focus precisely and operate smoothly // SHOULDER RIG: It includes 15mm rod, shoulder mount, soft rubber shoulder pad and dual-hand handgrip for all DSLR cameras video camcorders; Soft rubber pad makes it possible to deliver excellent shooting effects without any jerk or motion problems // Color: Note: Camera and Tripod are NOT included. Description: Top Handle Grip: Two rubber coated handles, comfortable to hold and spread apart for stabilization. Portable and lightweight. Easy to assemble or disassemble. The C-shaped Bracket: More mounting options. The bracket comes with 1/4 inch screw thread and 3/8 inch screw thread in it for you to mount your accessories. Can be mounted in both ways to your liking. A slip-proof rubber handle gives you a firm and comfortable grip. Red screw knobs to hold tight the bracket. Fit Rail Diameter: 15 mm Center-to-Center Distance: 60mm Matte Box: The flags provides extra flare reduction and improves the quality of videos. The side flags can be removed quickly and be attached or detached easily. It works with standard 15mm rail rod support systems, and fits lens from 43mm to 77mm sizes.(others do not fit.) The matte box is designed for most DV cameras with wide angle lenses. Follow Focus: Adjustable locking system. Compatible with all DSLR cameras, video cameras, HDV, DV, specially for HDSLR camera with movie function. Gear drive can be mounted from either side. Shoulder Rig: Can be installed with video-capture series of related accessories. Suitable for 1/4 inch screw-holes digital SLR cameras and camcorders. Can be installed rails (tube diameter 15mm center distance 60mm). Counter weight: The 2.5 pounds/1.1 kilograms Counter Weight, Specially designed for balancing your shoulder mount rig. Specifications: Color: Red + Black Package Contents: 1 x C-shaped Bracket 1 x Top Handle Grip 2 x 15mm Rod 1 x Matte Box 1 x Follow Focus 1 x Shoulder Rig 1 x Counter Weigh...
  • SMALLRIG 2118 Left Side Handle Kit with Wooden Rosette Gr...
    Precio:  $28,694.00

    SMALLRIG 2118 Left Side Handle Kit with Wooden Rosette Gr...

    -Titulo Original : SMALLRIG Left Side Handle Kit with Wooden Rosette Grip and NATO Rail Clamp – 2118-Fabricante : SMALLRIG-Descripcion Original: The left side handle grip comes with a rosette grip and NATO rail clamp to mount onto the cage or any accessories with NATO clamp // 【QUICK RELEASE DESIGN】With the QR rosette NATO clamp, the wooden handle could quickly attach and detach from the camera cage / camera rig by adjusting the red wingnut, which saves your time when shooting // 【360 DEGREE ROTATION】Connected by rosette for ARRI style, it allows 360-degree adjustment for better shooting. What’s more, the position of the handle can be adjusted according to the weight of the device // 【ERGONOMICA DESIGN】Made of high quality rosewood, hand-shaped design, beautiful appearance, and comfortable holding experience. The wooden handgrip is made of natural rosewood without any painting, thus the color will be a little different from the website // 【PLEASE NOTE】For left side only; It could directly be connected to the integrated rail of the cage, such as SmallRig GH5/GH5S Cage 2049.Please purchase an additional NATO rail if your device does not have a built-in one //...
  • Smallrig 2205 DSLR Monitor Holder Mount Camera Field Moni...
    Precio:  $11,701.00

    Smallrig 2205 DSLR Monitor Holder Mount Camera Field Moni...

    -Titulo Original : SMALLRIG DSLR Monitor Holder Mount Camera Field Monitor with NATO Clamp for Different Shooting Scenarios - 2205-Fabricante : SMALLRIG-Descripcion Original: 【SPECIAL PURPOSE】SMALLRIG Monitor Mount with Nato Clamp 2205 is designed to hold your monitor onto a camera cage via the Nato clamp such as SmallHD Monitor Cage 2131 /Atomos Monitor Cage 2008/SmallHD Focus HDMI Monitor Cage 2095. It features great convenience for you and gives you lots of DIY possibility // 【FLEXIBILITY ROTATION ADJUSTMENT 】 Rotation axis of this mount enables you to adjust the position of monitor up to 150° for better monitoring as per your needs at different directions during shooting. Allows to adjust the position of monitor up to 150 degree without using tools // 【QUICK RELEASE】 It allows to mount any monitor cage with NATO rail at the bottom to any camera cage with NATO rail on the top. NATO clamp on both sides to make your setup quick release // 【DURABLE CONNECTION】 This mount is used to lock the 5"or 7"monitor to the cage. This mount made by aluminum alloy,light weight but durable, lock your monitor solid and firmly. The structure is small but supports monitor up to 1.5kg. Also, this SMALLRIG monitor mount features a knob on each side to tighten, so you no need to worry about your machine dropping off. It is easy to lock and convenience to use // 【 HASSLE-FREE WARRANTY】At SMALLRIG, not only we offer high quality products,we back them up with 18-month warranty and a 30-day money back guaranty // A professional company specializing in camera accessories. A comprehensive enterprise integrating product design, research and development, sales and maintenance of camera accessories. Products are sold in the United States, China, Germany, France, Japan, Canada, Australia and other countries. We take high-quality products as the core and excellent customer service as our tenet. is designed to hold your monitor onto a camera cage via the Nato clamp,it allows to mount any monitor cage with nato rail at the bottom to any camera cage with nato rail on the top. The quick release monitor mount enables to adjust the position of monitor up to 150° without using tools. The lightweight mount is able to support monitor up to 1.5kg➤ Compatible with 5” or 7” monitor and supports monitor up to 1.5kg.➤ Nato clamp on both sides to make your setup quick release.➤ Allows to adjust the position of monitor up to 150 degree without using tools.➤ Features a knob on each side to tighten.Any 5”or 7”monitor cage with nato rail at the bottomProduct Dimensions: 56 x 28 x 51mm Net Weight: 70gMaterial(s): Aluminum Alloy1 x Monitor Mount1 x Hex SpannerAt SMALLRIG, not only we offer high quality products,we back them up with 18-month warranty and a 30-day money back guarant...
  • Smallrig 2082 Camera A6300 Cage For Sony A6000 / A6300 Wi...
    Precio:  $10,901.00

    Smallrig 2082 Camera A6300 Cage For Sony A6000 / A6300 Wi...

    -Titulo Original : SMALLRIG Camera A6300 Cage for Sony A6000 / A6300 with Wooden Handle Handgrip - 2082-Fabricante : SMALLRIG-Descripcion Original: SmallRig Cage 2082 is exclusively designed for Sony A6000/A6300 to bring out the camera’s maximum potential. It includes Cage 1661 and Wooden Handgrip 1970, offering lots of possibilities for additional attachment as per your needs during shooting. // SmallRig Cage 1661 fits and protects the camera perfectly. It does not block any access to the SD card slot, battery compartment, and all camera controls. // The integrated cold shoe on the top could attach Magic Arm 2026 for monitor, and 1/4’’-20 threaded holes on the top could be mounted with Safety Rail 1195 and then NATO handle 1955 for handheld shooting. The front of the cage is anti-twist designed and is good for heat dissipation. // Wooden Handgrip 1970 is designed ergonomically, offering a very comfortable experience for the cameraman. It prevents the hand from uncomfortableness caused by battery overheat. The wooden handle could be mounted on the right side of Cage 1661 via three M4 screws for an enjoyable gripping experience. // If you need an HDMI Clamp to provide HDMI cable from frequent tugging, you could go for SmallRig HDMI Cable Clamp(SmallRig 1822). //...
  • Smallrig 2027 Nato Top Handlegrip With Rod Clamp, Arri Lo..
    Precio:  $11,471.00

    Smallrig 2027 Nato Top Handlegrip With Rod Clamp, Arri Lo..

    -Titulo Original : SmallRig NATO Top Handlegrip with Rod Clamp, Arri Locating Points, Quick Release Clamp and Hidden Hex Spanner - 2027-Fabricante : SMALLRIG-Descripcion Original: A multi-functional NATO top grip with rod clamp for customized camera rigs or DIY camera solutions // NATO clamp can be moved forward and backward to fit different weight distribution, a hex spanner is hidden in the handle by magnet // Rail clamp can be used for attaching a single rod, EVF mount or microphone mount. It can also be utilized together with the grip or disassembled separately from this handle and attached to cages or any other accessories. Both NATO clamp and rod clamp can be controlled by wingnut by one hand // The cheese handle comes with 2 cold shoes in the front and back sides, and arrays of 1/4" and 3/8" threads for more DIY camera gadgets // This NATO Top Handle with Rod Clamp can be compatible with our many cages or cage kit, such as our cages, SmallRig 1844 (GX8 cage), SmallRig 1950 ( DMC-G85/G80 cage ), SmallRig 2004 ( Fujifilm X-T20 cage ) or our cage kits, such as GX85/ GX80/ GX7 Mark II cage kit ( SmallRig 2009 ), X-T20 cage kit ( SmallRig 2022, SmallRig 2023 ) //...
  • Smallrig 1982 Cage For Sony A7ii/a7rii/a7sii With Hdmi Ca...
    Precio:  $27,019.00

    Smallrig 1982 Cage For Sony A7ii/a7rii/a7sii With Hdmi Ca...

    -Titulo Original : SMALLRIG Cage for Sony A7II/A7RII/A7SII with HDMI Cable Clamp and Rosette - 1982-Fabricante : SMALLRIG-Descripcion Original: The SmallRig Cage 1982 is designed for Sony A7II, A7RII And A7SII camera to protect your camera body with anti-twist, machined from a solid block of aluminum. // Plenty of 1/4"- 20 and 3/8" mounting holes and the Locating Hole on the top allow kinds of accessories mounted on the cage. // Cold shoe mount could be mounted on articulating arm, EVF mount, Rode Video microphone, monitor, etc. // Integrated NATO mounting rail enables you to mount SmallRig NATO handles 1649, clamps, etc. The Rosette on the right could adapt ARRI compatible accessories like SmallRig Wooden Handle with Rosette 1941. // For an added measure of protection, an HDMI cable clamp secures an HDMI cable connected to the camera to prevent damage to the cable and the HDMI port. //...
  • SMALLRIG 1902 Camera Accessories Kit for Blackmagic URSA ...
    Precio:  $39,743.00

    SMALLRIG 1902 Camera Accessories Kit for Blackmagic URSA ...

    -Titulo Original : SMALLRIG Camera Accessories Kit for Blackmagic URSA Mini Including Top Handle, Side Plate,Top Plate, U-Base Plate -1902-Fabricante : SMALLRIG-Descripcion Original: SmallRig Accessories Kit for Blackmagic URSA Mini Camera 1902 is specially designed for Blackmagic URSA Mini Camera // This kit consists of a top cheese handle, a top plate, a side plate and a multipurpose U-base, which gives a good protection to camera // The shoe mounts, NATO rail on the plate work for wireless receiver, microphone and monitor // An rosette is designed for URSA Mini original handgrip or rosette arm // It comes with many 1/4" & 3/8" thread holes for additional accessories attachment. Also, you can attach 15mm rods for lens support. This kit is very useful in shootin // : 1.Quick attachment and removal 2.Protects the camera well 3.Cold shoe, NATO rail and rosette attachment 4.1/4 & 3/8 thread points : for Blackmagic URSA Mini Camera : 1 x Top Handle 1638 1 x Top Plate 1853 1 x Side Plate 1854 1 x Multipurpose U-Base 1674 9 x 1/4 -20 screw 1 x 3/8 -16 screw 1 x M6 screw 2 x Hex Spanner : 138x119x250mm : 690g : 165x152x80mm : 763g : Aluminum Allo...
  • Smallrig 1050 6 Inches (15 cm) Black Aluminum Alloy 15mm ...
    Precio:  $2,566.00

    Smallrig 1050 6 Inches (15 cm) Black Aluminum Alloy 15mm ...

    -Titulo Original : SMALLRIG 6 Inches (15 cm) Black Aluminum Alloy 15mm Rod with M12 Female Thread, Pack of 2 – 1050-Fabricante : SMALLRIG-Descripcion Original: 【LENGTH】Length of 6 inches/15cm // 【DIAMETER】The diameter of the rods is industrial 15mm standard // 【INNER THREAD】M12 inner thread on each end of a rod, so that you can 1) use M12 threaded connector (SMALLRIG 900) to lengthen the rod 2) use M12 rod end cap (SMALLRIG 1617) to prevent your accessories sliding from rods // 【COMPATIBILITY】Mainly used on camera riser system and filmmaking accessories, such as matte box, follow focus, lens support, etc. // 【HIGH QUALITY】Made of 601 aluminum alloy, well finished and precise CNC processing, sturdy and durable // Size: SMALLRIG Black Aluminum Alloy 15mm rod, Length of 6 inches/15cm – 1050 6 inches/15cm 15mm 2 X Rod 15*15*150mm 170*30*23mm 76g 96g Aluminum Allo...
  • Kit De Manubrio Para Zhiyun 2 2017 (xmp)
    Precio:  $21,610.00

    Kit De Manubrio Para Zhiyun 2 2017 (xmp)

    -Titulo Original : Zhiyun Crane 2 2017 Dual Handle Grip Handheld Handlebar with PERGEAR Cleaning Cloth Specially Designed for Zhiyun Crane 2 3-Axis Gimbal Stabilizer-Fabricante : Pergear-Descripcion Original: -Aleación de aluminio aeroespacial, ligero y duradero libremente cambiar entre funcionamiento con una sola mano/dual-hand -Especialmente diseñado para Zhiyun crane-2 2017 última versión cardán con enfoque de seguimiento -Dos 1/4 hilo en el mango, para conectar monitor, mando a distancia Bluetooth o cualquier otros accesorios con sus cámara...
  • SMALLRIG 1860 25mm 1 inch Rod Clamp for Ronin-M, Ronin MX...
    Precio:  $7,055.00

    SMALLRIG 1860 25mm 1 inch Rod Clamp for Ronin-M, Ronin MX...

    -Titulo Original : SMALLRIG 25mm 1 inch Rod Clamp for Ronin-M, Ronin MX, Freefly MOVI - 1860-Fabricante : SMALLRIG-Descripcion Original: SMALLRIG 25mm Rod Clamp For DJI Ronin-M,Ronin MX 1860 is aiming at mounting additional accessories on the camera series for DJI Ronin // Suitable for Ronin M, Ronin MX and any other items with 25mm or 1 inche rods // EVF, Ball Head, Cold Shoe mount can be installed by screws on arrays of 1/4'' and 3/8'' screw holes // Compatibility: for Ronin M, Ronin MX and any other 25mm or 1 inch rods // Note: It doesn't fit for DJI Ronin, since the diameter for DJI Ronin bar is 30mm // : 1.Quick clamp on the 25mm rod; 2.Optional screw holes for other mounts assembled : 1x 25mm Rod Clamp 1860 1x Hex Spanner 2x1/4-20 Screw : 65g : 80g : 48x28.5x43mm : 104x96x30mm : Aluminum Allo...
Mostrar del 1 al 24 (de 342 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]