Arriba

Componentes Electrónicos > Raspberry Pi

Mostrar: 
Mostrar del 1 al 24 (de 47 productos)
Páginas de Resultados:  1  2  [Siguiente >>] 
  • Raspberry Pi HAT Enclosure
    Precio:  $2,547.00

    Raspberry Pi HAT Enclosure

    -Titulo Original : Raspberry Pi HAT Enclosure-Fabricante : RASPBERRY PI-Descripcion Original: 3-Part Enclosure: Removable Cover, Top, and Base Frame // Fits standard-size Raspberry Pi HATs // All ports are accessible // Compatible with the Raspberry Pi 3 Model B, Raspberry Pi 2, and Raspberry Pi B+. // NOTE: SenseHAT NOT Included. // This clever enclosure features a removable top cover that allows full access to standard-size Pi HATS. It's a great way to keep your Pi safe while experimenting and expanding it's capabilities...
  • Game Hat Para Raspberry Pi A+/b+/2b/3b/3b+ 3.5 Ips 480x320
    Precio:  $9,999.00

    Game Hat Para Raspberry Pi A+/b+/2b/3b/3b+ 3.5 Ips 480x320

    -Titulo Original : Waveshare Game HAT for Raspberry Pi A+/B+/2B/3B/3B+ 3.5inch IPS Screen 480x320 Resolution 60 Frame Experience Make Your Own Game Console-Fabricante : Waveshare-Descripcion Original: Este GAME HAT convertirá tu Raspberry Pi en una consola de juegos clásica en un segundo, te recuerda todos los placeres de los juegos en la memoria. Pantalla IPS de 3.5 pulgadas, resolución 480 × 320, experiencia de 60 cuadros, visualización fluida, no más pérdida de cuadros Compatible con Raspberry Pi A + / B + / 2B / 3B / 3B + (Raspberry Pi Zero / Zero W / Zero WH requiere otro cable HDMI) Integra el circuito de carga de la batería, alimentado por una batería de litio 18650 (NO incluida), se reproduce en cualquier lugar en cualquier momento Indicador de capacidad de la batería Altavoz a bordo y conector para auriculares, escuche el BGM familiar de los viejos tiempo...
  • Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30
    Precio:  $4,461.00

    Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30

    -Titulo Original : Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30-Fabricante : RASPBERRY PI-Descripcion Original: Computer accessories, Computers | Electronics, Electronics | Peripherals and spares // Color:Multicolor Link to blog - how to get started with the camera module - with sample script ...
  • Raspberry Pi 32gb Preloaded (noobs) Sd Card
    Precio:  $3,007.00

    Raspberry Pi 32gb Preloaded (noobs) Sd Card

    -Titulo Original : Raspberry Pi 32GB Preloaded (NOOBS) SD Card-Fabricante : RASPBERRY PI-Descripcion Original: Official 32GB MicroSD Card and Full-Size Adapter // Fully Qualified by the Raspberry Pi Foundation for Optimum Performance // Preloaded with the NOOBS Operating System // Works with all Raspberry Pi Models // Raspberry Pi Foundation Official 32GB MicroSD Card with Full-Size Adapter. Fully Qualified by the Raspberry Pi Foundation for Optimum Performance. Preloaded with the NOOBS Operating System. Works with all Raspberry Pi Models. SanDisk Ultra Class 10 MicroSD Card in OEM (black color) packaging...
  • Adafruit Small-Size Perma-Proto Raspberry Pi Breadboard PCB.
    Precio:  $1,471.00

    Adafruit Small-Size Perma-Proto Raspberry Pi Breadboard PCB.

    -Titulo Original : Adafruit Small-Size Perma-Proto Raspberry Pi Breadboard PCB Kit [ADA1171]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1171 // Stock Type: Raspberry Pi >> Prototyping >> Model A+, B+, & Pi 2 // In Stock & Ready to Ship // We put a PermaProto quarter-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the PermaProto for Pi! It has the Cobbler baked right in. Simply solder the 2x13 pin header in and you get all the labeled breakouts with tons of prototyping space, power rails, mounting holes and that gorgeous silk. Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: its always crummy quality, with pads that flake off and no labeling. Then we thought about how people actually prototype - usually starting with a solderless breadboard and then transferring the parts to a more permanent PCB. That's when we realized what people would really like is a proto board that makes it easy! This proto-board is the PCB you always wish you had, but never realized it! We took the basic layout of a quarter-sized breadboard (the PCB has 17 rows) and turned that into a beautiful PCB. The top side has a white silkscreen, and the same markings you're familiar with, to make transferring components easy. The bottom has a 4-hole pad design that matches a classic breadboard, with 4 power bus lines on the sides, and no mask so you can easily cut traces when necessary. We used 1.2mm diameter drill holes so even parts with big leads will fit. All holes are thru-plated for strength - these wont peel off with rework. The finish is a gold plate - you won't get oxidation like with bare copper perf ! There are also tons of mounting holes so you can attach the PCB to your project box. Comes with one PCB and one box header, you'll need to do a little light soldering to attach the box header to the PCB but its fast and easy to do. To connect it to a Pi, you'll also need a 26-pin GPIO cable if you don't already have one. Adafruit Small-Size Perma-Proto Raspberry Pi Breadboard PCB Kit ( 15:15 ...
  • Adafruit Flex Cable for Raspberry Pi Camera - 2 meters...
    Precio:  $2,235.00

    Adafruit Flex Cable for Raspberry Pi Camera - 2 meters...

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 2 meters [ADA2144]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2144 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 2 meters long. We have cables in  a ton of sizes  so you can have the perfect fit. Each order comes with one cable,  Pi Camera  not included (but we have those in the shop as well) Please note, we did test this length cable with our Pi Model B/B+ and a Pi Camera and it worked great but 2 meters is really long for this kind of camera protocol, so if you have a very electrically noisy environment (inside a tesla coil?) you may have corrupted images...
  • Element14 Raspberry Pi 3 B+ Motherboard
    Precio:  $7,138.00

    Element14 Raspberry Pi 3 B+ Motherboard

    -Titulo Original : Element14 Raspberry Pi 3 B+ Motherboard-Fabricante : ELEMENT-Descripcion Original: 1.4GHz 64-bit quad-core ARMv8 CPU, 1 GB RAM // 802.11n Wireless LAN, 10/100Mbps Lan Speed // Bluetooth 4.2, Bluetooth Low Energy // 4 USB ports, 40 GPIO pins, Full HDMI port, Combined 3.5mm audio jack and composite video // Camera interface (CSI),Display interface (DSI), Micro SD card slot (now push-pull rather than push-push), VideoCore IV 3D graphics core // New Original Raspberry Pi 3 Model B+ Built-in Broadcom 1.4GHz quad-core 64 bit processor with Low Energy On-Board Wifi Bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity. To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2.5A adapter is required. Technical Specifications: - Broadcom BCM2837BO 64 bit ARMv8 QUAD Core A53 64bit Processor powered Single Board Computer run at 1.4GHz - 1GB RAM - BCM43143 WiFi on board - Bluetooth Low Energy (BLE) on board - 40 pin extended GPIO - 4 x USB2 ports - 4 pole Stereo output and Composite video port - Full size HDMI - CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - MicroSD port for loading your operating system and storing data - Upgraded switched Micro USB power source (now supports up to 2.5 Amps. Package Contents : - 1x Raspberry Pi 3 Model B...
  • Raspberry Pi Model A+ (256MB)
    Precio:  $4,387.00

    Raspberry Pi Model A+ (256MB)

    -Titulo Original : Raspberry Pi Model A+ (256MB)-Fabricante : RASPBERRY PI-Descripcion Original: Fully HAT-compatible // 256MB RAM // 40-Pin GPIO // 1x USB 2.0 Port // Size : 65mm x 56mm (shorter than Raspberry Pi A/B/B+) // Building something with robotics, or any project that doesnt need Ethernet networking? The lightweight, low-power Raspberry Pi A+ might be a great fit. Smaller and lighter than the Raspberry Pi B+, on the A+ the mounting holes are in the same place as the B+,making swapping a B+ for an A+ really easy. The A+, as the B+, is compatible with the new Hardware Attached on Top (HAT) standard for Raspberry Pi add-on boards - it has the same improved GPIO (General Purpose Input/Output) as the B+. The outline of a Model A+ and a HAT board is identical, making an A+ with aHAT expansion boarda sleek stack.The design is based around a Broadcom BCM2835 SoC, which includes an ARM1176JZF-S 700 MHz processor and VideoCore IV GPU. Smaller, thinner (only 12mm, limited by the low-profile USB port) and even less power-hungry than the B+, the A+ is considerably cheaper. What's been reduced from the B+ to the A+: one USB port, 256MB RAM and no Ethernet port otherwise electrically identical to the B+ Raspberry Pi A+ Hilights: benefits from the B+s improved power chain microSD card for booting and long-term storage powered via the USB data ports Raspberry Pi typically usesLinux kernel based operating systems. The Raspberry Pi does not come with a real-time clock; it cannot keep track of the time of day when not powered on.As alternatives, a program running on the Pi can get the time from a network time server or user input at boot time.A real-time clock(such as the DS1307)with battery backup can be added via the IC interface...
  • Adafruit Flex Cable for Raspberry Pi Camera - 50mm / 2...
    Precio:  $1,167.00

    Adafruit Flex Cable for Raspberry Pi Camera - 50mm / 2...

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 50mm / 2 [ADA1645]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1645 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 50mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well) Flex Cable for Raspberry Pi Camera - 50mm / 2 ( 7:45 ...
  • ContempoViews Intermediate Starter Kit para Raspberry Pi B + 2 & 3 RPi Learning Kit 1210
    Precio:  $5,363.00

    ContempoViews Intermediate Starter Kit para Raspberry Pi B + 2 & 3 RPi Learning Kit 1210

    -Titulo Original : ContempoViews Intermediate Starter Kit for Raspberry Pi B+ 2 & 3 RPi Learning Kit 1210-Fabricante : Contempo Views-Descripcion Original: Advanced learning kit intended for those with some experience with RPi or Arduino // Over 35 different components // Nearly 100pcs in total // Numerous electronic components to enhance your Raspberry Pi experience // This is an advanced learning kit for Raspberry Pi. It is equipped with more interesting and powerful functional modules than the basic starter kit, and so it is more suitable for those who have already had some relevant knowledge. This advanced version provides more abundant learning materials and more space for creating some interesting interactive projects. Raspberry Pi is a credit card sized single-board computer, through which we can learn relevant knowledge about Linux operating systems as well as C and python language based on Raspberry Pi debian (based on linux) system, not to mention sensor/module applications on Raspberry Pi. Arduino and Raspberry Pi are a great match for each other. - 10MM Full color high-brightness sensor x 1 - Home appliances control module x 1 - Raspberry Pi GPIO V2 shield x 1 - High-quality 830 hole breadboard x 1 - MAX7219 dot matrix module x 1 - 9g servo x 1 - ULN2003 driving board x 1 - Black remote control x 1 - 5V step motor x 1 - 50K adjustable potentiometer x 1 - 801S vibration sensor x 1 - PS2 game rocker module x 1 - Four-bit digital tube x 1 - One-bit digital tube x 1 - 74H595 IC x 1 - Red LED x 5 - Blue LED x 5 - Yellow LED x 5 - 1K resistor x 5 - 10K resistor x 5 - 220R resistor x 8 - DHT11 Humiture sensor x 1 - DS3231 clock x 1 - PCF8591 AD/DA conversion module x1 - Yellow button cap x 4 - Infrared receiver component x 1 - LM35 component x 1 - Flame component x 1 - Ball component x 2 - Light-sensitive component x 3 - Mini LCD screen x 1 - 40Pin colorful flat cable x 1 - Membrane keypad x 1 - Dupont Cable x 30 - Male to female dupont cable/20-row x 1 - SR04 ultrasonic x ...
  • Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2...
    Precio:  $7,893.00

    Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2...

    -Titulo Original : Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2 [ADA2324]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2324 // Stock Type: Raspberry Pi >> Pi HATs & Plates >> Hats // In Stock & Ready to Ship // It's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+, B+, or Pi 2. Does not work with the Pi 3 at this time Here's the low-down on the GPS module:-165 dBm sensitivity, 10 Hz updates, 66 channelsOnly 20mA current drawBuilt in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off!PPS output on fix, by default connected to pin #4Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky viewFix status LED blinks to let you know when the GPS has determined the current coordinatesWe spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more. Please note, this HAT takes over the Raspberry Pi's hardware UART to send/receive data to and from the GPS module . So, if you need to use the RX/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi. Read up on our tutorial for more information on how to use this fine HAT Comes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder.  You can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top  or a  slim ultra-low-profile header...
  • PiTFT Plus 480x320 3.5 TFT+Touchscreen for Raspberry Pi - Pi
    Precio:  $6,540.00

    PiTFT Plus 480x320 3.5 TFT+Touchscreen for Raspberry Pi - Pi

    -Titulo Original : PiTFT Plus 480x320 3.5 TFT+Touchscreen for Raspberry Pi - Pi 2 and Model A+ / B+-Fabricante : ADAFRUIT-Descripcion Original: This PiTFT 3.5" is designed to fit nicely onto the Raspberry Pi 2 or Model A+ / B+, not compatible with original Model A and Model B // Comes fully assembled and ready to plug into your Pi! (See not below) // You can also have an HDMI display separately connected.(This may be required during initial setup) // Features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay // Important Note: This product requires configuration and driver setup to work correctly on the PI and is not "plug and play". Many users report a "white" screen indicating the PI has not been configured correctly. Please see Adafruit Documentation or contact the seller if you experience this issue. Raspberry Pi Not included // Color: Is this not the cutest, little display for the Raspberry Pi? It features a 3.5 display with 480x320 16-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered specifically to work with the Raspberry Pi 2 and the Model A+ / B+. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top! This PiTFT 3.5 is designed to fit nicely onto the Raspberry Pi 2 or Model A+ / B+. If you'd like to use a 3.5 display with the original Pi A or Pi B, check out this version The display uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. GPIO #18 can be used to PWM dim the backlight if you like. All other GPIO are unused. There's a 2x16 'classic Pi' connection GPIO header on the bottom, you can connect a 26-pin Pi GPIO cable to it to use any of the other pins as you like. The other GPIO are broken out into solder pads at the bottom, in case you want to use more of the GPIO. Best of all, it comes fully assembled and ready to plug into your Pi! You can use this as a display for running the X interface, or pygame. You can also have an HDMI display seperately connected. There's four mounting ears that can be used to attach the display & Pi to a bezel, or snap them off with pliers (they're perforated) for a slick exactly-the-same-size-as-a-Pi look. Adafruit created a custom kernel package based of off Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. Adafruit's tutorial shows you how to install the software, as well as calibrate the touchscreen, display images such as from your PiCam and more! Please visit Adafruit for more informatio...
  • Set De 4 Joystick Arcade Mame Raspberry Pi / Usb Pc
    Precio:  $18,574.00

    Set De 4 Joystick Arcade Mame Raspberry Pi / Usb Pc

    -Titulo Original : 4 Player LED Arcade DIY Kit for USB MAME PC Game DIY & Raspberry Pi Retro Controller DIY Including 4X Arcade Joystick, 40x LED Chrome Arcade Buttons 2X Zero Delay USB Encoder-Fabricante : EG STARTS-Descripcion Original: Este es un juego de piezas de bricolaje LED para proyectos de bricolaje para 2 jugadores. ¡El codificador admite todos los sistemas de Windows! Todas las partes no son originales de Sanwa. Recién hecho en piezas de China, todos los botones no son de metal. Si el LED no se enciende. Luego, cambie la interfaz del LED de ubicación. ¡Cada codificador tiene su propio cable USB para asegurarse de que el modo multijugador puede jugar en las mismas condiciones! ¡El Joystick es un joystick profesional de 8 vías! Los botones son botones LED de 5V iluminados con microinterruptores incorporados en el interior. Los botones predeterminados están iluminados todo el tiempo. Si compra uno de este artículo, ¿Qué incluirá en el paquete? Codificador USB 4x Zero Delay LED 4x cable USB 4x cables de 5 pines para Joystick 40x cables de 3 pines para botones LED Joystick 4x 5 pines de 8 vías (1x rojo, 1x amarillo, 1x azul, 1x verde) 1x 1 jugador más grande 5V LED cromo pulsadores (blanco) con lámpara LED y micro interruptor 1x 2 jugadores más grandes 5V LED botones de cromo (blanco) con lámpara LED y micro interruptor 1x 3 jugadores más grandes botones de cromo LED de 5V (blanco) con lámpara LED y micro interruptor 1x 4 jugadores más grandes 5V LED botones de cromo (blanco) con lámpara LED y micro interruptor 4x Coin Botones de cromo LED de 5V más grandes (blanco) con lámpara LED y micro interruptor 32x botones LED cromados de 5V más grandes con LED y micro interruptor (8x rojo, 8x amarillo, 8x azul, 8x verde) 1x instrucciones Consejos para la instalación. 1. Por favor lea nuestro manual de usuario antes de comenzar sus acciones de bricolaje. 2. ¡Es muy importante! Conecte el cable de 5 pines del Joystick a la ranura de 5 pines que se encuentra frente al terminal USB-B. Mucha gente conecta el joystick a la ranura incorrecta de 5 pines. 3. No es necesario separar las funciones del botón cuando conectas el cable a los botones y al panel de codificador, excepto que deseas agregar las funciones Auto-Fire, Tubro, Clear y Mode. Todas las funciones del botón de lucha pueden ser establecido en MAME o RetroPie. Las funciones Auto-Fire, Tubro, Clear y Mode tienen su propia ranura en la placa del codificador. 4. Para jugadores profesionales. Sugerimos que cambie todos los botones y joysticks a SANWA Brand o SEIMITSU Brand. Consejos para nuevos usuarios: 1. El artículo necesita trabajar con el emulador MAME. Entonces, antes de construir su propio proyecto, descargue uno para trabajar con las piezas. 2. Si usa este kit para construir sus propios proyectos de frambuesa Pi Retropie. Busque los pasos antes de su bricolaje...
  • Raspberry Pi Foundation Case For Model B+ & Raspberry Pi 2.
    Precio:  $1,784.00

    Raspberry Pi Foundation Case For Model B+ & Raspberry Pi 2.

    -Titulo Original : Raspberry Pi Foundation Case For Model B+ & Raspberry Pi 2 Model B Case For Raspberry Pi 3 Model B/B+-Fabricante : RASPBERRY PI-Descripcion Original: Official case for the Raspberry Pi from the Raspberry Pi Foundation // Removable Lid provides easy access to the camera and display ports // Removable Side Panels with easy access to the GPIO port // Removable Top Frame // Designed with Pi HAT's in mind // Official case for the Raspberry Pi from the Raspberry Pi Foundation 5 part enclosure Removable Lid for easy access to the camera and display ports Removable Top Frame Removable Side Panels with easy access to the GPIO port Designed with Pi HAT's in mind Dimensions: 96mm x 70mm x 25mm Compatible with the Raspberry Pi 2 Model B and Raspberry Pi Model B+ Note: Model A+ Boards will fit in this case however the USB port is recessed inside the case...
  • Raspberry Pi 3 Model B Motherboard (Element 14)
    Precio:  $6,384.00

    Raspberry Pi 3 Model B Motherboard (Element 14)

    -Titulo Original : Raspberry Pi 3 Model B Motherboard (Element 14)-Fabricante : RASPBERRY PI-Descripcion Original: 1.2GHz 64-bit quad-core ARMv8 CPU, 1 GB RAM // 802.11n Wireless LAN, 10/100Mbps Lan Speed // Bluetooth 4.1, Bluetooth Low Energy // 4 USB ports, 40 GPIO pins, Full HDMI port, Combined 3.5mm audio jack and composite video // Camera interface (CSI),Display interface (DSI), Micro SD card slot (now push-pull rather than push-push), VideoCore IV 3D graphics core // Raspberry Pi 3 Model B Motherboar...
  • Adafruit Raspberry Pi B+ Case - Smoke Base w/ Clear Top
    Precio:  $1,931.00

    Adafruit Raspberry Pi B+ Case - Smoke Base w/ Clear Top

    -Titulo Original : Adafruit Raspberry Pi B+ Case - Smoke Base w/ Clear Top-Fabricante : ADAFRUIT-Descripcion Original: The Pi snaps into the base and the lid fits snugly onto the top. If you want to break out your Pi you can use your case without the lid and add hats to your B+ with ease. // This case works for the Raspberry Pi Model B+ only. // It does work with the model A+ but there will be a bit of empty space of course, and you'll need to snake your USB cable or connector through the front holes which may not work if the cable is bulky // It does not work for the Raspberry Pi Model A or B. // No Pi, cables, or Pi Camera included. This product is just the case! // This enclosure was designed by Mike Doell - just like our elegant, beautiful, and functional Pi Case for Raspberry Pi Model B. Made of ultra-durable, super-glossy polycarbonate, it is both good looking and tough enough to toss into your bookbag or toolbox. It has slim openings for all your cables, an easy-to-remove beveled slot for your Micro SD card, slots for both your Pi Camera and upcoming Display, and a space for your GPIO cable to extend out from the Pi. The Pi snaps into the base and the lid fits snugly onto the top. If you want to break out your Pi you can use your case without the lid and add hats to your B+ with ease. This is the basic, classic enclosure with a smoke base and a clear top. More colors are coming soon and we'll have packs to mix and match for ultimate Raspberry Pi B+ enclosure fun, but we'll be starting out with this very neutral gray/clear combo. This case works for the Raspberry Pi Model B+ only. It does not work for the Raspberry Pi Model A or B. It does work with the model A+ but there will be a bit of empty space of course, and you'll need to snake your USB cable or connector through the front holes which may not work if the cable is bulky No Pi, cables, or Pi Camera included. This product is just the case...
  • RASPBERRY - Box for Raspberry Pi RASPBERRY 10874
    Precio:  $2,915.00

    RASPBERRY - Box for Raspberry Pi RASPBERRY 10874

    -Titulo Original : RASPBERRY - Box for Raspberry Pi RASPBERRY 10874-Fabricante : RASPBERRY PI-Descripcion Original: Material: Plastic // Color: White/Red // Quantity: Single Pack // Made for Raspberry Pi 3 // Beautifully crafted, this red and white snap-together case is designed to protect your Raspberry Pi Model B. This 5-part enclosure has removable side panels to enable access to the GPIO...
  • Raspberry Pi 3 A+ Computer Board
    Precio:  $5,611.00

    Raspberry Pi 3 A+ Computer Board

    -Titulo Original : Raspberry Pi 3 A+ Computer Board-Fabricante : RASPBERRY-Descripcion Original: Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz // 512MB LPDDR2 SDRAM // 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE // Extended 40-pin GPIO header // Full-size HDMI // 1.4GHz 64-bit quad-core processor, dual-band wireless LAN, Bluetooth 4.2/BLE in the same mechanical format as the Raspberry Pi 1 Model A...
  • Adafruit Smt Gpio Header For Raspberry Pi Hat - 2x20 Short.
    Precio:  $1,397.00

    Adafruit Smt Gpio Header For Raspberry Pi Hat - 2x20 Short.

    -Titulo Original : Adafruit SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header [ADA2187]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2187 // Stock Type: Raspberry Pi >> Raspberry Pi B+, Pi 2, & Pi 3 >> Prototyping // In Stock & Ready to Ship // For super-slim SMT designs, this custom-made, 2x20 short SMT female header can be used to plug a Raspberry Pi HAT onto a B+ or A+ or Pi 2. It's harder to use than the Thru-Hole type headers, but for the slickest, slimmest fit, this header is recommended...
  • Raspberry Pi 3 Case - Black/Grey
    Precio:  $1,572.00

    Raspberry Pi 3 Case - Black/Grey

    -Titulo Original : Raspberry Pi 3 Case - Black/Grey-Fabricante : RASPBERRY PI-Descripcion Original: Official case for the Raspberry Pi from the Raspberry Pi Foundation // Removable Lid provides easy access to the camera and display ports // Removable Side Panels with easy access to the GPIO port // Removable Top Frame // Designed with Pi HAT's in mind // The Official Case of the Raspberry Pi Foundation has been refreshed for the Pi 3. Designed with HATs in mind and featuring multiple removable panels. Enclose your board as much or as little as necessary to best suit your latest project...
  • Raspberry Pi 3 Model B Board
    Precio:  $6,687.00

    Raspberry Pi 3 Model B Board

    -Titulo Original : Raspberry Pi 3 Model B Board-Fabricante : RASPBERRY PI-Descripcion Original: Raspberry pi 3 model b adds wireless LAN and Bluetooth connectivity making it the ideal solution for powerful connected designs. // Raspberry pi 3 use Processor chipest Boardcom BCM 2837 64 bIT ARMv7 Quad Core processor powered Singel Board Computer running at 1200MHz // Raspberry pi 3 model b RAM : 1GB SDRAM@400MHz //...
  • Adafruit Flex Cable for Raspberry Pi Camera - 300mm / 12...
    Precio:  $1,775.00

    Adafruit Flex Cable for Raspberry Pi Camera - 300mm / 12...

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 300mm / 12 [ADA1648]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1648 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 300mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well) Flex Cable for Raspberry Pi Camera - 300mm / 12 ( 7:45 ...
  • Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
    Precio:  $4,029.00

    Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit

    -Titulo Original : Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit-Fabricante : ADAFRUIT-Descripcion Original: 4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC // Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) // Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping. // Big terminal block connectors to easily hook up wires (18-26AWG) and power // Works best with Raspberry Pi model A+, B+, or Pi 2, but can be used with a model A or B if you purchase a 2x13 extra-tall header and solder that instead of the 2x20 // Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins. In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include. Motors are controlled by TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time), a big improvement over L293D drivers and there are built-in flyback diodes as well. We even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit so all you have to do is solder on the included 2x20 plain header and the terminal blocks. Install the easy-to-use Python library, check out the examples and you're ready to go! Comes with an assembled & tested HAT, terminal blocks, and 2x20 plain header. Some soldering is required to assemble the headers o...
  • Adafruit Ultimate GPS HAT for Raspberry Pi A+ or B+ Mini Kit
    Precio:  $6,844.00

    Adafruit Ultimate GPS HAT for Raspberry Pi A+ or B+ Mini Kit

    -Titulo Original : Adafruit Ultimate GPS HAT for Raspberry Pi A+ or B+ Mini Kit-Fabricante : ADAFRUIT-Descripcion Original: 165 dBm sensitivity, 10 Hz updates, 66 channels // Built in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off! // Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky view // Fix status LED blinks to let you know when the GPS has determined the current coordinates // Raspberry Pi *not* included // This new HAT from Adafruit adds their celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+ or B+ We spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more. Please note, this HAT takes over the Raspberry Pi's hardware UART to send/receive data to and from the GPS module. So, if you need to use the RX/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi. Read up on Adafruit's tutorial for more information on how to use this fine HAT. Comes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder. This HAT does not come with a 12mm coin battery! A CR1220 will let you use the real-time-clock capability of the GPS HAT...
Mostrar del 1 al 24 (de 47 productos)
Páginas de Resultados:  1  2  [Siguiente >>]