Arriba

Componentes Electrónicos > Raspberry Pi

Mostrar: 
Mostrar del 1 al 24 (de 47 productos)
Páginas de Resultados:  1  2  [Siguiente >>] 
  • Adafruit DPI TFT Kippah for Raspberry Pi [ADA2454]
    Precio:  $4,199.00

    Adafruit DPI TFT Kippah for Raspberry Pi [ADA2454]

    -Titulo Original : Adafruit DPI TFT Kippah for Raspberry Pi [ADA2454]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2454 // Stock Type: Raspberry Pi >> Pi HATs & Plates >> Plates // In Stock & Ready to Ship // A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit ! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what  normally  would go out the HDMI port come up on a nice little flat screen. * Its not technically a HAT due to the lack of an on-board EEPROM, but its the same shape as a Pi HAT and its a covering of sorts, so we call it a kippah This is the Kippah with no touchscreen support . We have a version with touchscreen capabilities if that's your thing! Compared to our lovely HDMI backpacks, you don't have the extra cost or expense of an HDMI encoder/decoder. And you get a nice ultra-fast 18-bit color display with optional touch support. We tested it and it works great with our 5 and 7 displays at 800x480. This display is 'native' so it gets all the graphics accelleration capabilities, instant refresh, etc. you would get from an HDMI displayOK so, exciting right? But, what's the catch? The catch is  this add on board uses nearly every pin available on the Raspberry Pi and those pins are hardcoded, they cannot be moved or rearranged . The pins used are GPIO 2 through 21 inclusive. That means you don't get the UART RX/TX pins (no console cable) and you don't get the standard user I2C pins, the EEPROM I2C pins, or hardware SPI pins. You do get to use pins #22, #23, #24, #25, #26 and #27, and the USB ports are fine to use too. The other catch is that this display replaces the HDMI/NTSC output , so you can't have the DPI HAT and HDMI working at once, nor can you 'flip' between the two. Also, there's no PWM's available so you can't have precision backlight control unless you somehow rig up an external PWM generator with a 555 or something. Finally, we did test this setup with ...
  • 2 Player Controller USB  Joystick MAME Raspberry Pi 1/2/3
    Precio:  $4,969.00

    2 Player Controller USB Joystick MAME Raspberry Pi 1/2/3

    -Titulo Original : Easyget 2 Player Zero Delay Generic Game Controller Usb To Joystick For Mame & Raspberry Pi 1/2/3 Retropie Diy Projects Support For Sanwa Parts-Fabricante : Easyget-Descripcion Original: Fan Included No Memory Series VENGEANCE RGB PRO Memory Type DDR4 Memory Size 128GB Kit (4 x 32GB) Tested Latency 16-20-20-38 Tested Voltage 1.35V Tested Speed 3200MHz Memory Color BLACK LED Lighting RGB Single Zone / Multi-Zone Lighting Individually Addressable SPD Latency 15-15-15-36 SPD Speed 2133MHz SPD Voltage 1.2V Speed Rating PC4-25600 (3200MHz) Compatibility Intel Z390,Intel X299 Heat Spreader Anodized Aluminum Package Memory Format DIMM Performance Profile XMP 2.0 Package Memory Pin 28...
  • Official Raspberry Pi 3 Case - Red/White
    Precio:  $1,909.00

    Official Raspberry Pi 3 Case - Red/White

    -Titulo Original : Official Raspberry Pi 3 Case - Red/White-Fabricante : RASPBERRY PI-Descripcion Original: Official case for the Raspberry Pi from the Raspberry Pi Foundation // Removable Lid provides easy access to the camera and display ports // Removable Side Panels with easy access to the GPIO port // Removable Top Frame // Designed with Pi HAT's in mind // Color: The Official Case of the Raspberry Pi Foundation has been refreshed for the Pi 3. Designed with HATs in mind and featuring multiple removable panels. Enclose your board as much or as little as necessary to best suit your latest project...
  • Adafruit Raspberry Pi B+ Case - Smoke Base w/ Clear Top
    Precio:  $2,569.00

    Adafruit Raspberry Pi B+ Case - Smoke Base w/ Clear Top

    -Titulo Original : Adafruit Raspberry Pi B+ Case - Smoke Base w/ Clear Top-Fabricante : ADAFRUIT-Descripcion Original: The Pi snaps into the base and the lid fits snugly onto the top. If you want to break out your Pi you can use your case without the lid and add hats to your B+ with ease. // This case works for the Raspberry Pi Model B+ only. // It does work with the model A+ but there will be a bit of empty space of course, and you'll need to snake your USB cable or connector through the front holes which may not work if the cable is bulky // It does not work for the Raspberry Pi Model A or B. // No Pi, cables, or Pi Camera included. This product is just the case! // This enclosure was designed by Mike Doell - just like our elegant, beautiful, and functional Pi Case for Raspberry Pi Model B. Made of ultra-durable, super-glossy polycarbonate, it is both good looking and tough enough to toss into your bookbag or toolbox. It has slim openings for all your cables, an easy-to-remove beveled slot for your Micro SD card, slots for both your Pi Camera and upcoming Display, and a space for your GPIO cable to extend out from the Pi. The Pi snaps into the base and the lid fits snugly onto the top. If you want to break out your Pi you can use your case without the lid and add hats to your B+ with ease. This is the basic, classic enclosure with a smoke base and a clear top. More colors are coming soon and we'll have packs to mix and match for ultimate Raspberry Pi B+ enclosure fun, but we'll be starting out with this very neutral gray/clear combo. This case works for the Raspberry Pi Model B+ only. It does not work for the Raspberry Pi Model A or B. It does work with the model A+ but there will be a bit of empty space of course, and you'll need to snake your USB cable or connector through the front holes which may not work if the cable is bulky No Pi, cables, or Pi Camera included. This product is just the case...
  • Adafruit Flex Cable For Raspberry Pi Camsra O Display 300mm
    Precio:  $1,709.00

    Adafruit Flex Cable For Raspberry Pi Camsra O Display 300mm

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera or Display - 300mm / 12-Fabricante : ADAFRUIT-Descripcion Original: Dimensions: 50mm x 16mm (2" x 0.6") // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. // This cable is 50mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well) // Available in 50mm (2"), 100mm (4"), 200mm (8"), 300mm (12") Lengths // Raspberry Pi & Camera Board NOT included // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 50mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well...
  • RS Raspberry Pi 7-Inch LCD Touch Screen Case, White
    Precio:  $4,409.00

    RS Raspberry Pi 7-Inch LCD Touch Screen Case, White

    -Titulo Original : RS Raspberry Pi 7-Inch LCD Touch Screen Case, White-Fabricante : RASPBERRY PI-Descripcion Original: Color: Note: Raspberry Pi Board and Raspberry Pi LCD Touch Screen are sold separately. Case compatible only with the Official Raspberry Pi 7 LCD Touch Screen. This case is designed to house your Raspberry Pi board and the Official Raspberry Pi 7 LCD Touch Screen providing protection to the board and the display. The case also acts as a bezel to the display, improving its appearance while housing the board neatly behind it...
  • Raspberry Pi Camera Module V2-8 Megapixel,1080p
    Precio:  $5,389.00

    Raspberry Pi Camera Module V2-8 Megapixel,1080p

    -Titulo Original : Raspberry Pi Camera Module V2-8 Megapixel,1080p-Fabricante : RASPBERRY PI-Descripcion Original: Second Generation Raspberry Pi Camera Module with Fixed Focus Lens // Sony Exmor IMX219 Sensor Capable of 4K30, 1080P60, 720P180, 8MP Still // 3280 (H) x 2464 (V) Active Pixel Count // Maximum of 1080P30 and 8MP Stills in Raspberry Pi Board // 2A Power Supply Highly Recommended // Color: The Raspberry Pi Camera V2 features the same, tiny footprint (25mm x 23mm x 9mm) as the original Pi Camera module, but features an upgraded Sony IMX219 image sensor which has a native resolution of 8 megapixels. The fixed-focus lens can capture 3280 x 2464 pixel images and 1080p30, 720p60 and 640x480p90 video. The Raspberry Pi Camera V2 connects to the CSi connector of your Raspberry Pi via a 15cm long flexible ribbon cable. It is plug-and-play compatible latest version of the Raspbian operating system making it perfect for time-lapse photography, recording video, motion detection, and security applications...
  • Set De 4 Joystick Arcade Mame Raspberry Pi / Usb Pc
    Precio:  $24,699.00

    Set De 4 Joystick Arcade Mame Raspberry Pi / Usb Pc

    -Titulo Original : 4 Player LED Arcade DIY Kit for USB MAME PC Game DIY & Raspberry Pi Retro Controller DIY Including 4X Arcade Joystick, 40x LED Chrome Arcade Buttons 2X Zero Delay USB Encoder-Fabricante : EG STARTS-Descripcion Original: Este es un juego de piezas de bricolaje LED para proyectos de bricolaje para 2 jugadores. ¡El codificador admite todos los sistemas de Windows! Todas las partes no son originales de Sanwa. Recién hecho en piezas de China, todos los botones no son de metal. Si el LED no se enciende. Luego, cambie la interfaz del LED de ubicación. ¡Cada codificador tiene su propio cable USB para asegurarse de que el modo multijugador puede jugar en las mismas condiciones! ¡El Joystick es un joystick profesional de 8 vías! Los botones son botones LED de 5V iluminados con microinterruptores incorporados en el interior. Los botones predeterminados están iluminados todo el tiempo. Si compra uno de este artículo, ¿Qué incluirá en el paquete? Codificador USB 4x Zero Delay LED 4x cable USB 4x cables de 5 pines para Joystick 40x cables de 3 pines para botones LED Joystick 4x 5 pines de 8 vías (1x rojo, 1x amarillo, 1x azul, 1x verde) 1x 1 jugador más grande 5V LED cromo pulsadores (blanco) con lámpara LED y micro interruptor 1x 2 jugadores más grandes 5V LED botones de cromo (blanco) con lámpara LED y micro interruptor 1x 3 jugadores más grandes botones de cromo LED de 5V (blanco) con lámpara LED y micro interruptor 1x 4 jugadores más grandes 5V LED botones de cromo (blanco) con lámpara LED y micro interruptor 4x Coin Botones de cromo LED de 5V más grandes (blanco) con lámpara LED y micro interruptor 32x botones LED cromados de 5V más grandes con LED y micro interruptor (8x rojo, 8x amarillo, 8x azul, 8x verde) 1x instrucciones Consejos para la instalación. 1. Por favor lea nuestro manual de usuario antes de comenzar sus acciones de bricolaje. 2. ¡Es muy importante! Conecte el cable de 5 pines del Joystick a la ranura de 5 pines que se encuentra frente al terminal USB-B. Mucha gente conecta el joystick a la ranura incorrecta de 5 pines. 3. No es necesario separar las funciones del botón cuando conectas el cable a los botones y al panel de codificador, excepto que deseas agregar las funciones Auto-Fire, Tubro, Clear y Mode. Todas las funciones del botón de lucha pueden ser establecido en MAME o RetroPie. Las funciones Auto-Fire, Tubro, Clear y Mode tienen su propia ranura en la placa del codificador. 4. Para jugadores profesionales. Sugerimos que cambie todos los botones y joysticks a SANWA Brand o SEIMITSU Brand. Consejos para nuevos usuarios: 1. El artículo necesita trabajar con el emulador MAME. Entonces, antes de construir su propio proyecto, descargue uno para trabajar con las piezas. 2. Si usa este kit para construir sus propios proyectos de frambuesa Pi Retropie. Busque los pasos antes de su bricolaje...
  • ContempoViews Intermediate Starter Kit para Raspberry Pi B + 2 & 3 RPi Learning Kit 1210
    Precio:  $5,099.00

    ContempoViews Intermediate Starter Kit para Raspberry Pi B + 2 & 3 RPi Learning Kit 1210

    -Titulo Original : ContempoViews Intermediate Starter Kit for Raspberry Pi B+ 2 & 3 RPi Learning Kit 1210-Fabricante : Contempo Views-Descripcion Original: Advanced learning kit intended for those with some experience with RPi or Arduino // Over 35 different components // Nearly 100pcs in total // Numerous electronic components to enhance your Raspberry Pi experience // This is an advanced learning kit for Raspberry Pi. It is equipped with more interesting and powerful functional modules than the basic starter kit, and so it is more suitable for those who have already had some relevant knowledge. This advanced version provides more abundant learning materials and more space for creating some interesting interactive projects. Raspberry Pi is a credit card sized single-board computer, through which we can learn relevant knowledge about Linux operating systems as well as C and python language based on Raspberry Pi debian (based on linux) system, not to mention sensor/module applications on Raspberry Pi. Arduino and Raspberry Pi are a great match for each other. - 10MM Full color high-brightness sensor x 1 - Home appliances control module x 1 - Raspberry Pi GPIO V2 shield x 1 - High-quality 830 hole breadboard x 1 - MAX7219 dot matrix module x 1 - 9g servo x 1 - ULN2003 driving board x 1 - Black remote control x 1 - 5V step motor x 1 - 50K adjustable potentiometer x 1 - 801S vibration sensor x 1 - PS2 game rocker module x 1 - Four-bit digital tube x 1 - One-bit digital tube x 1 - 74H595 IC x 1 - Red LED x 5 - Blue LED x 5 - Yellow LED x 5 - 1K resistor x 5 - 10K resistor x 5 - 220R resistor x 8 - DHT11 Humiture sensor x 1 - DS3231 clock x 1 - PCF8591 AD/DA conversion module x1 - Yellow button cap x 4 - Infrared receiver component x 1 - LM35 component x 1 - Flame component x 1 - Ball component x 2 - Light-sensitive component x 3 - Mini LCD screen x 1 - 40Pin colorful flat cable x 1 - Membrane keypad x 1 - Dupont Cable x 30 - Male to female dupont cable/20-row x 1 - SR04 ultrasonic x ...
  • Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2...
    Precio:  $12,079.00

    Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2...

    -Titulo Original : Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2 [ADA2324]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2324 // Stock Type: Raspberry Pi >> Pi HATs & Plates >> Hats // In Stock & Ready to Ship // It's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+, B+, or Pi 2. Does not work with the Pi 3 at this time Here's the low-down on the GPS module:-165 dBm sensitivity, 10 Hz updates, 66 channelsOnly 20mA current drawBuilt in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off!PPS output on fix, by default connected to pin #4Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky viewFix status LED blinks to let you know when the GPS has determined the current coordinatesWe spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more. Please note, this HAT takes over the Raspberry Pi's hardware UART to send/receive data to and from the GPS module . So, if you need to use the RX/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi. Read up on our tutorial for more information on how to use this fine HAT Comes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder.  You can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top  or a  slim ultra-low-profile header...
  • Raspberry Pi HAT Enclosure
    Precio:  $3,119.00

    Raspberry Pi HAT Enclosure

    -Titulo Original : Raspberry Pi HAT Enclosure-Fabricante : RASPBERRY PI-Descripcion Original: 3-Part Enclosure: Removable Cover, Top, and Base Frame // Fits standard-size Raspberry Pi HATs // All ports are accessible // Compatible with the Raspberry Pi 3 Model B, Raspberry Pi 2, and Raspberry Pi B+. // NOTE: SenseHAT NOT Included. // This clever enclosure features a removable top cover that allows full access to standard-size Pi HATS. It's a great way to keep your Pi safe while experimenting and expanding it's capabilities...
  • Raspberry Pi 3 Model B+ Board (3b+)
    Precio:  $8,259.00

    Raspberry Pi 3 Model B+ Board (3b+)

    -Titulo Original : Raspberry Pi 3 Model B Board (3B)-Fabricante : Raspberry Pi-Descripcion Original: MARCADOR DE PUNTAS DOBLES: puntas gemelas amplias y finas para resaltar, dibujar y subrayar con precisión. Los marcadores finos se pueden usar para escribir y enganchar líneas, mientras que los marcadores gruesos son adecuados para dibujar y colorear. 88 COLORES VIBRANTES: los marcadores a base de agua tienen colores brillantes y buena transparencia. El marcador nunca se desvanecerá con el tiempo. Cada color es atractivo, lo que puede agregarle un toque de creatividad y diversión. 88 colores vivos pueden satisfacer todas sus necesidades. REGALO PERFECTO: el juego de rotuladores está equipado con un hermoso estuche negro que es fácil de transportar, viajar y almacenar. También es un regalo de Navidad ideal para niños, adolescentes, adultos, estudiantes, maestros, etc. USOS ILIMITADOS: los marcadores a menudo se usan para pintar en papel de cartulina más apretado o papel recubierto. Además, se puede utilizar en expresiones de arquitectura, interiorismo, diseño industrial y diseño de productos pintados a mano. SEGURO Y NO TÓXICO: 100% seguro para niños a partir de 3 años. Cada marcador no es tóxico. Los marcadores de alcohol de color Vigorfun 88 son permanentes y coloridos con puntas de doble cara. Los rotuladores son atractivos, los colores son brillantes y nunca se desvanecen. Los marcadores se pueden utilizar ampliamente, como papel para tarjetas, papel recubierto, diseño industrial, diseño de productos, etc. No solo pueden dibujar y colorear, sino también resaltar, dibujar y subrayar. Además, son seguros y no tóxicos, un gran regalo para niños, adolescentes y adultos. Caracteristicas Puntas de cincel ancho y punta fina Forma cuadrada del barril Fluido suave Cada marcador tiene su nombre y número de color El juego viene con una tarjeta de color. Todo viene en una hermosa bolsa negra con soporte Especificaciones 1.Marca: Vigorfun 2.Tamaño de los marcadores: 6.9 x 5.5 x 6.7 pulgadas (17.5 x 14 x 17 cm) 3.Marcadores de peso: 3,4 libras (1,56 kg) 4.Color: 88 colores. 5.Paquete: bolsa negra con soporte 6.Ingredientes: 64% de etanol anhidro, 18% de resina, 10% de disolvente negro, 8% de propilenglicol monometiléter 7.Usos: papel, tela, zapatos, artesanías, paredes, vidrio, piedra, madera, etc. CONSEJOS 1. Retirar la tapa no más de una hora. 2. Se recomienda cubrir la tapa inmediatamente después del uso: los marcadores no estarán secos; el color no se mezclará; larga vida útil 3. Si el marcador está seco, cubra la tapa y espere más de diez minutos...
  • Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30
    Precio:  $5,929.00

    Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30

    -Titulo Original : Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30-Fabricante : RASPBERRY PI-Descripcion Original: Computer accessories, Computers | Electronics, Electronics | Peripherals and spares // Color:Multicolor Link to blog - how to get started with the camera module - with sample script ...
  • Raspberry Pi Zero W (Wireless) ( 2017 model)
    Precio:  $4,409.00

    Raspberry Pi Zero W (Wireless) ( 2017 model)

    -Titulo Original : Raspberry Pi Zero W (Wireless) ( 2017 model)-Fabricante : RASPBERRY PI-Descripcion Original: Raspberry Pi Zero W // SoC: Broadcom BCM2835--CPU: ARM11 running at 1GHz--RAM: 512MB // Wireless: 2.4GHz 802.11n wireless LAN (WiFi) // Bluetooth: Bluetooth Classic 4.1 and Bluetooth LE // Dimensions: 65mm × 30mm × 5mm // Dimensions: 65mm × 30mm × 5mm SoC: Broadcom BCM2835 CPU: ARM11 running at 1GHz RAM: 512MB Wireless: 2.4GHz 802.11n wireless LAN Bluetooth: Bluetooth Classic 4.1 and Bluetooth LE Power: 5V, supplied via micro USB connector Video & Audio: 1080P HD video & stereo audio via mini-HDMI connector Storage: MicroSD card Output: Micro USB GPIO: 40-pin GPIO, unpopulated Pins: Run mode, unpopulated; RCA composite, unpopulated Camera Serial Interface (CSI...
  • Adafruit Smt Gpio Header For Raspberry Pi Hat - 2x20 Short.
    Precio:  $1,859.00

    Adafruit Smt Gpio Header For Raspberry Pi Hat - 2x20 Short.

    -Titulo Original : Adafruit SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header [ADA2187]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2187 // Stock Type: Raspberry Pi >> Raspberry Pi B+, Pi 2, & Pi 3 >> Prototyping // In Stock & Ready to Ship // For super-slim SMT designs, this custom-made, 2x20 short SMT female header can be used to plug a Raspberry Pi HAT onto a B+ or A+ or Pi 2. It's harder to use than the Thru-Hole type headers, but for the slickest, slimmest fit, this header is recommended...
  • Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit
    Precio:  $6,859.00

    Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit

    -Titulo Original : Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit-Fabricante : ADAFRUIT-Descripcion Original: Simple design - plug in power, plug in IDC cable, and run Adafruit's Python code. // Onboard level shifters to convert the RasPi's 3.3V to 5.0V logic for clean matrix driving. // Works with Adafruit 16x32, 32x32 or 32x64 RGB LED Matrices with HUB75 connections. You can even chain multiple matrices together for a longer display. // Included: RGB Matrix HAT controller. NOT Included: RGB LED Matrix (sold separately), Raspberry Pi, 5V power supply, or coin cell battery for Real Time Clock. (Real Time Clock not needed for unit to function) // You can now create a dazzling display with your Raspberry Pi Model A+/B+/Pi 2 or Pi 3 with the Adafruit RGB Matrix HAT. This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those we stock in the shop and create a colorful scrolling display or mini LED wall with ease. Each order comes with a HAT PCB with all surface mount parts assembled, a 2x20 female socket connector, a 2 pin terminal block, and a 2x8 IDC socket connector. A CR1220 coin cell is not included (required for real time clock). A 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A so pick up a 5V 4A power supply...
  • Element14 Raspberry Pi 3 B+ Motherboard
    Precio:  $8,499.00

    Element14 Raspberry Pi 3 B+ Motherboard

    -Titulo Original : Element14 Raspberry Pi 3 B+ Motherboard-Fabricante : ELEMENT-Descripcion Original: 1.4GHz 64-bit quad-core ARMv8 CPU, 1 GB RAM // 802.11n Wireless LAN, 10/100Mbps Lan Speed // Bluetooth 4.2, Bluetooth Low Energy // 4 USB ports, 40 GPIO pins, Full HDMI port, Combined 3.5mm audio jack and composite video // Camera interface (CSI),Display interface (DSI), Micro SD card slot (now push-pull rather than push-push), VideoCore IV 3D graphics core // New Original Raspberry Pi 3 Model B+ Built-in Broadcom 1.4GHz quad-core 64 bit processor with Low Energy On-Board Wifi Bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity. To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2.5A adapter is required. Technical Specifications: - Broadcom BCM2837BO 64 bit ARMv8 QUAD Core A53 64bit Processor powered Single Board Computer run at 1.4GHz - 1GB RAM - BCM43143 WiFi on board - Bluetooth Low Energy (BLE) on board - 40 pin extended GPIO - 4 x USB2 ports - 4 pole Stereo output and Composite video port - Full size HDMI - CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - MicroSD port for loading your operating system and storing data - Upgraded switched Micro USB power source (now supports up to 2.5 Amps. Package Contents : - 1x Raspberry Pi 3 Model B...
  • Set De 2 Joystick Arcade Mame Raspberry Pi / Usb Pc
    Precio:  $12,279.00

    Set De 2 Joystick Arcade Mame Raspberry Pi / Usb Pc

    -Titulo Original : Fosiya 2 Player Arcade Games Ellipse Oval Style 8 Ways Joystick + 20 x LED Chrome Arcade Buttons for Video Games Standard Controllers All Windows PC MAME Raspberry Pi (Mixed Colors Chrome Buttons)-Fabricante : Fosiya-Descripcion Original: Excellent Control USB Encoder. High Quality Ellipse Oval Style 8 way joystick. LED Buttons Good lighting effects. Perfect LED illuminated parts for 2 player Arcade MAME Jamma and other fighting game DIY Project! Made with highest quality materials! Heat resistant plastic! Environmentally friendly metal! Includes: 2 x 5Pin Arcade Joystick + 2 x USB Encoder + 20 x Chrome plated LED button (1 Player + 2 Player + 2x Coin button). Chrome LED Illuminated push buttons with build-in Blue switch inside, excellent electronic performance, long life, reliability tested to 3,000,000 cycles...
  • Raspberry Pi 16GB Preloaded (Noobs) SD Card …
    Precio:  $4,009.00

    Raspberry Pi 16GB Preloaded (Noobs) SD Card …

    -Titulo Original : Raspberry Pi 16GB Preloaded (Noobs) SD Card …-Fabricante : RASPBERRY PI-Descripcion Original: Genuine 16GB SanDisk Ultra Class 10 MicroSD Card (Red/White) with adapter // Works with all Raspberry Pi Models // Fully Qualified by the Raspberry Pi Foundation for Optimum Performance // Preloaded with the NOOBS Operating System // Raspberry Pi 16GB Preloaded (NOOBS) SD Card &hellip...
  • Raspberry Pi 3 Model B Motherboard
    Precio:  $8,499.00

    Raspberry Pi 3 Model B Motherboard

    -Titulo Original : Raspberry Pi 3 Model B Motherboard-Fabricante : RASPBERRY PI-Descripcion Original: ✔ Modular Design: Modular designed Half cage for Fujifilm X-T3 and X-T2 Camera with battery grip // ✔ Dovetail Plate for Arca-Type: Compatible dovetail plate for Arca-Type with center marks on both axis // ✔ 2 Using Ways: The top plate can be removed, and the top plate and half cage can be used separately // ✔ Built-in Slot: Features a slot on the bottom allows to extend camera for tethering or cable release // ✔ Built-in Flat Screw Driver: Built-in flat screw driver on the bottom for quick adjustment // Color: A professional company specializing in camera accessories. A comprehensive enterprise integrating product design, research and development, sales and maintenance of camera accessories. Products are sold in the United States, China, Germany, France, Japan, Canada, Australia and other countries. We take high-quality products as the core and excellent customer service as our tenet.is a modular designed half cage with anti-twist flanges to keep the camera from twisting and provide multiple mounting points. Optional top plate is locked via a M4 screw and a shoe lock to prevent twisting.The top plate can be removed.The top plate and the half cage can be used separately.✔ The top plate comes with an arri 3/8”hole and integrate with a cold shoe for more accessories attachment if needed.✔ It features multiple 1/4-20 threaded holes on the side and bottom for accessory attachment, such as cold shoe 1593 for microphone.✔ Design for Fujifilm X-T3 with VG-XT3 Vertical Battery Grip✔ Design for Fujifilm X-T2 with VPB-XT2 Vertical Battery Grip✔ Product Dimensions: 108X 64X155mm✔ Package Dimensions: 143 x 100 x55mm✔ Net Weight: 190g✔ Package Weight: 235g✔ Material(s): Aluminum Alloy✔ 1 x Bottom Plate✔ 1 x Side Plate✔ 1 x Top Plate✔ 3 x M4 Screw✔ 1x Hex SpannerAt SMALLRIG, not only we offer high quality products,we back them up with 18-month warranty and a 30-day money back guarant...
  • Raspberry Pi Zero 1.3 Camera Version
    Precio:  $5,639.00

    Raspberry Pi Zero 1.3 Camera Version

    -Titulo Original : Raspberry Pi Zero 1.3 Camera Version-Fabricante : RASPBERRY PI-Descripcion Original: Powerful processor, Tiny form factor // The Pi Zero packs a sizzling 1GHz single-core ARM 11 CPU with 512MB RAM. Despite its diminutive size, it’s 40 percent faster than the original Raspberry Pi model...
  • PiTFT Plus 480x320 3.5 TFT+Touchscreen for Raspberry Pi - Pi
    Precio:  $9,099.00

    PiTFT Plus 480x320 3.5 TFT+Touchscreen for Raspberry Pi - Pi

    -Titulo Original : PiTFT Plus 480x320 3.5 TFT+Touchscreen for Raspberry Pi - Pi 2 and Model A+ / B+-Fabricante : ADAFRUIT-Descripcion Original: This PiTFT 3.5" is designed to fit nicely onto the Raspberry Pi 2 or Model A+ / B+, not compatible with original Model A and Model B // Comes fully assembled and ready to plug into your Pi! (See not below) // You can also have an HDMI display separately connected.(This may be required during initial setup) // Features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay // Important Note: This product requires configuration and driver setup to work correctly on the PI and is not "plug and play". Many users report a "white" screen indicating the PI has not been configured correctly. Please see Adafruit Documentation or contact the seller if you experience this issue. Raspberry Pi Not included // Color: Is this not the cutest, little display for the Raspberry Pi? It features a 3.5 display with 480x320 16-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered specifically to work with the Raspberry Pi 2 and the Model A+ / B+. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top! This PiTFT 3.5 is designed to fit nicely onto the Raspberry Pi 2 or Model A+ / B+. If you'd like to use a 3.5 display with the original Pi A or Pi B, check out this version The display uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. GPIO #18 can be used to PWM dim the backlight if you like. All other GPIO are unused. There's a 2x16 'classic Pi' connection GPIO header on the bottom, you can connect a 26-pin Pi GPIO cable to it to use any of the other pins as you like. The other GPIO are broken out into solder pads at the bottom, in case you want to use more of the GPIO. Best of all, it comes fully assembled and ready to plug into your Pi! You can use this as a display for running the X interface, or pygame. You can also have an HDMI display seperately connected. There's four mounting ears that can be used to attach the display & Pi to a bezel, or snap them off with pliers (they're perforated) for a slick exactly-the-same-size-as-a-Pi look. Adafruit created a custom kernel package based of off Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. Adafruit's tutorial shows you how to install the software, as well as calibrate the touchscreen, display images such as from your PiCam and more! Please visit Adafruit for more informatio...
  • Adafruit Ultimate GPS HAT for Raspberry Pi A+ or B+ Mini Kit
    Precio:  $12,499.00

    Adafruit Ultimate GPS HAT for Raspberry Pi A+ or B+ Mini Kit

    -Titulo Original : Adafruit Ultimate GPS HAT for Raspberry Pi A+ or B+ Mini Kit-Fabricante : ADAFRUIT-Descripcion Original: 165 dBm sensitivity, 10 Hz updates, 66 channels // Built in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off! // Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky view // Fix status LED blinks to let you know when the GPS has determined the current coordinates // Raspberry Pi *not* included // This new HAT from Adafruit adds their celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+ or B+ We spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more. Please note, this HAT takes over the Raspberry Pi's hardware UART to send/receive data to and from the GPS module. So, if you need to use the RX/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi. Read up on Adafruit's tutorial for more information on how to use this fine HAT. Comes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder. This HAT does not come with a 12mm coin battery! A CR1220 will let you use the real-time-clock capability of the GPS HAT...
  • Raspberry Pi 32gb Preloaded (noobs) Sd Card
    Precio:  $3,999.00

    Raspberry Pi 32gb Preloaded (noobs) Sd Card

    -Titulo Original : Raspberry Pi 32GB Preloaded (NOOBS) SD Card-Fabricante : RASPBERRY PI-Descripcion Original: Official 32GB MicroSD Card and Full-Size Adapter // Fully Qualified by the Raspberry Pi Foundation for Optimum Performance // Preloaded with the NOOBS Operating System // Works with all Raspberry Pi Models // Raspberry Pi Foundation Official 32GB MicroSD Card with Full-Size Adapter. Fully Qualified by the Raspberry Pi Foundation for Optimum Performance. Preloaded with the NOOBS Operating System. Works with all Raspberry Pi Models. SanDisk Ultra Class 10 MicroSD Card in OEM (black color) packaging...
Mostrar del 1 al 24 (de 47 productos)
Páginas de Resultados:  1  2  [Siguiente >>]