Arriba

Componentes Electrónicos > Raspberry Pi

Mostrar: 
Mostrar del 1 al 24 (de 42 productos)
Páginas de Resultados:  1  2  [Siguiente >>] 
  • Raspberry Pi HAT Enclosure
    Precio:  $2,479.00

    Raspberry Pi HAT Enclosure

    -Titulo Original : Raspberry Pi HAT Enclosure-Fabricante : RASPBERRY PI-Descripcion Original: 3-Part Enclosure: Removable Cover, Top, and Base Frame // Fits standard-size Raspberry Pi HATs // All ports are accessible // Compatible with the Raspberry Pi 3 Model B, Raspberry Pi 2, and Raspberry Pi B+. // NOTE: SenseHAT NOT Included. // This clever enclosure features a removable top cover that allows full access to standard-size Pi HATS. It's a great way to keep your Pi safe while experimenting and expanding it's capabilities...
  • Raspberry Pi Foundation Case For Model B+ & Raspberry Pi 2.
    Precio:  $1,699.00

    Raspberry Pi Foundation Case For Model B+ & Raspberry Pi 2.

    -Titulo Original : Raspberry Pi Foundation Case For Model B+ & Raspberry Pi 2 Model B Case For Raspberry Pi 3 Model B/B+-Fabricante : RASPBERRY PI-Descripcion Original: Official case for the Raspberry Pi from the Raspberry Pi Foundation // Removable Lid provides easy access to the camera and display ports // Removable Side Panels with easy access to the GPIO port // Removable Top Frame // Designed with Pi HAT's in mind // Official case for the Raspberry Pi from the Raspberry Pi Foundation 5 part enclosure Removable Lid for easy access to the camera and display ports Removable Top Frame Removable Side Panels with easy access to the GPIO port Designed with Pi HAT's in mind Dimensions: 96mm x 70mm x 25mm Compatible with the Raspberry Pi 2 Model B and Raspberry Pi Model B+ Note: Model A+ Boards will fit in this case however the USB port is recessed inside the case...
  • Raspberry Pi 32gb Preloaded (noobs) Sd Card
    Precio:  $2,949.00

    Raspberry Pi 32gb Preloaded (noobs) Sd Card

    -Titulo Original : Raspberry Pi 32GB Preloaded (NOOBS) SD Card-Fabricante : RASPBERRY PI-Descripcion Original: Official 32GB MicroSD Card and Full-Size Adapter // Fully Qualified by the Raspberry Pi Foundation for Optimum Performance // Preloaded with the NOOBS Operating System // Works with all Raspberry Pi Models // Raspberry Pi Foundation Official 32GB MicroSD Card with Full-Size Adapter. Fully Qualified by the Raspberry Pi Foundation for Optimum Performance. Preloaded with the NOOBS Operating System. Works with all Raspberry Pi Models. SanDisk Ultra Class 10 MicroSD Card in OEM (black color) packaging...
  • Mini Aluminum Heat Sink for Raspberry Pi - 13 x 13 x 3mm
    Precio:  $1,009.00

    Mini Aluminum Heat Sink for Raspberry Pi - 13 x 13 x 3mm

    -Titulo Original : Mini Aluminum Heat Sink for Raspberry Pi - 13 x 13 x 3mm-Fabricante : ADAFRUIT-Descripcion Original: This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi but is best paired with a Raspberry Pi 3 since it can run a little hot. // Looking for an ultra-thin heat sink for your Raspberry Pi 3? Check out this nice and slim 13x13x3mm Heat Sink! This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi but is best paired with a Raspberry Pi 3 since it can run a little hot. It comes with thermal adhesive already applied to the back making installation super easy. Clean the surface of the chip of any dust or grease then peel off the protective film and press the heat sink firmly onto the chip. You can use this heatsink with any of our injection molded Adafruit Pi Enclosures, but it may not work with other enclosures and some HATs may not fit on top with the heat sink installed. We don't have formal specs for this heat sink, but when we ran 'stress -c 4' on the Pi 3 to run all 4 CPUs, a heat-sink-less Pi quickly dropped down to 0.96 GHz to maintain thermal equilibrium. With this heat sink installed, it could run at 1.02 GHz (so, 6% higher performance). It's a very minimal heatsink! Note that you do not need a heatsink for the Pi 3, it will automatically adjust its speed to avoid overheating! It can also, of course, be used for other processors and chips...
  • Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2...
    Precio:  $7,929.00

    Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2...

    -Titulo Original : Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2 [ADA2324]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2324 // Stock Type: Raspberry Pi >> Pi HATs & Plates >> Hats // In Stock & Ready to Ship // It's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+, B+, or Pi 2. Does not work with the Pi 3 at this time Here's the low-down on the GPS module:-165 dBm sensitivity, 10 Hz updates, 66 channelsOnly 20mA current drawBuilt in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off!PPS output on fix, by default connected to pin #4Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky viewFix status LED blinks to let you know when the GPS has determined the current coordinatesWe spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more. Please note, this HAT takes over the Raspberry Pi's hardware UART to send/receive data to and from the GPS module . So, if you need to use the RX/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi. Read up on our tutorial for more information on how to use this fine HAT Comes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder.  You can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top  or a  slim ultra-low-profile header...
  • Element14 Raspberry Pi 3 B+ Motherboard
    Precio:  $6,709.00

    Element14 Raspberry Pi 3 B+ Motherboard

    -Titulo Original : Element14 Raspberry Pi 3 B+ Motherboard-Fabricante : ELEMENT-Descripcion Original: 1.4GHz 64-bit quad-core ARMv8 CPU, 1 GB RAM // 802.11n Wireless LAN, 10/100Mbps Lan Speed // Bluetooth 4.2, Bluetooth Low Energy // 4 USB ports, 40 GPIO pins, Full HDMI port, Combined 3.5mm audio jack and composite video // Camera interface (CSI),Display interface (DSI), Micro SD card slot (now push-pull rather than push-push), VideoCore IV 3D graphics core // New Original Raspberry Pi 3 Model B+ Built-in Broadcom 1.4GHz quad-core 64 bit processor with Low Energy On-Board Wifi Bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity. To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2.5A adapter is required. Technical Specifications: - Broadcom BCM2837BO 64 bit ARMv8 QUAD Core A53 64bit Processor powered Single Board Computer run at 1.4GHz - 1GB RAM - BCM43143 WiFi on board - Bluetooth Low Energy (BLE) on board - 40 pin extended GPIO - 4 x USB2 ports - 4 pole Stereo output and Composite video port - Full size HDMI - CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - MicroSD port for loading your operating system and storing data - Upgraded switched Micro USB power source (now supports up to 2.5 Amps. Package Contents : - 1x Raspberry Pi 3 Model B...
  • Raspberry Pi 3 Case - Black/Grey
    Precio:  $1,229.00

    Raspberry Pi 3 Case - Black/Grey

    -Titulo Original : Raspberry Pi 3 Case - Black/Grey-Fabricante : RASPBERRY PI-Descripcion Original: Official case for the Raspberry Pi from the Raspberry Pi Foundation // Removable Lid provides easy access to the camera and display ports // Removable Side Panels with easy access to the GPIO port // Removable Top Frame // Designed with Pi HAT's in mind // The Official Case of the Raspberry Pi Foundation has been refreshed for the Pi 3. Designed with HATs in mind and featuring multiple removable panels. Enclose your board as much or as little as necessary to best suit your latest project...
  • 2 Player Controller USB  Joystick MAME Raspberry Pi 1/2/3
    Precio:  $3,749.00

    2 Player Controller USB Joystick MAME Raspberry Pi 1/2/3

    -Titulo Original : Easyget 2 Player Zero Delay Generic Game Controller Usb To Joystick For Mame & Raspberry Pi 1/2/3 Retropie Diy Projects Support For Sanwa Parts-Fabricante : Easyget-Descripcion Original: Fan Included No Memory Series VENGEANCE RGB PRO Memory Type DDR4 Memory Size 128GB Kit (4 x 32GB) Tested Latency 16-20-20-38 Tested Voltage 1.35V Tested Speed 3200MHz Memory Color BLACK LED Lighting RGB Single Zone / Multi-Zone Lighting Individually Addressable SPD Latency 15-15-15-36 SPD Speed 2133MHz SPD Voltage 1.2V Speed Rating PC4-25600 (3200MHz) Compatibility Intel Z390,Intel X299 Heat Spreader Anodized Aluminum Package Memory Format DIMM Performance Profile XMP 2.0 Package Memory Pin 28...
  • ContempoViews Intermediate Starter Kit para Raspberry Pi B + 2 & 3 RPi Learning Kit 1210
    Precio:  $4,829.00

    ContempoViews Intermediate Starter Kit para Raspberry Pi B + 2 & 3 RPi Learning Kit 1210

    -Titulo Original : ContempoViews Intermediate Starter Kit for Raspberry Pi B+ 2 & 3 RPi Learning Kit 1210-Fabricante : Contempo Views-Descripcion Original: Advanced learning kit intended for those with some experience with RPi or Arduino // Over 35 different components // Nearly 100pcs in total // Numerous electronic components to enhance your Raspberry Pi experience // This is an advanced learning kit for Raspberry Pi. It is equipped with more interesting and powerful functional modules than the basic starter kit, and so it is more suitable for those who have already had some relevant knowledge. This advanced version provides more abundant learning materials and more space for creating some interesting interactive projects. Raspberry Pi is a credit card sized single-board computer, through which we can learn relevant knowledge about Linux operating systems as well as C and python language based on Raspberry Pi debian (based on linux) system, not to mention sensor/module applications on Raspberry Pi. Arduino and Raspberry Pi are a great match for each other. - 10MM Full color high-brightness sensor x 1 - Home appliances control module x 1 - Raspberry Pi GPIO V2 shield x 1 - High-quality 830 hole breadboard x 1 - MAX7219 dot matrix module x 1 - 9g servo x 1 - ULN2003 driving board x 1 - Black remote control x 1 - 5V step motor x 1 - 50K adjustable potentiometer x 1 - 801S vibration sensor x 1 - PS2 game rocker module x 1 - Four-bit digital tube x 1 - One-bit digital tube x 1 - 74H595 IC x 1 - Red LED x 5 - Blue LED x 5 - Yellow LED x 5 - 1K resistor x 5 - 10K resistor x 5 - 220R resistor x 8 - DHT11 Humiture sensor x 1 - DS3231 clock x 1 - PCF8591 AD/DA conversion module x1 - Yellow button cap x 4 - Infrared receiver component x 1 - LM35 component x 1 - Flame component x 1 - Ball component x 2 - Light-sensitive component x 3 - Mini LCD screen x 1 - 40Pin colorful flat cable x 1 - Membrane keypad x 1 - Dupont Cable x 30 - Male to female dupont cable/20-row x 1 - SR04 ultrasonic x ...
  • Raspberry Pi 5mp 1080p Modulo Night Vision - No Infrarrojo
    Precio:  $3,109.00

    Raspberry Pi 5mp 1080p Modulo Night Vision - No Infrarrojo

    -Titulo Original : Raspberry Pi 5MP 1080P Camera NoIR (No IR Filter) Night Vision Module-Fabricante : RASPBERRY PI-Descripcion Original: Ideal for night-vision photos and video recording // 5 megapixel sensor // Supports 1080p, 720p and 640x480p HD video // Shoots still images with resolutions up to 2592 x 1944 // Supported by Raspbian, Raspberry Pi's preferred operating system // The Raspberry Pi NoIR Camera Module is a custom designed night vision camera module for Raspberry Pi. Unlike the regular Pi camera, the NoIR does not have an IR cut filter, making it sensitive to IR illumination...
  • Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
    Precio:  $3,749.00

    Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit

    -Titulo Original : Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit-Fabricante : ADAFRUIT-Descripcion Original: 4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC // Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) // Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping. // Big terminal block connectors to easily hook up wires (18-26AWG) and power // Works best with Raspberry Pi model A+, B+, or Pi 2, but can be used with a model A or B if you purchase a 2x13 extra-tall header and solder that instead of the 2x20 // Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins. In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include. Motors are controlled by TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time), a big improvement over L293D drivers and there are built-in flyback diodes as well. We even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit so all you have to do is solder on the included 2x20 plain header and the terminal blocks. Install the easy-to-use Python library, check out the examples and you're ready to go! Comes with an assembled & tested HAT, terminal blocks, and 2x20 plain header. Some soldering is required to assemble the headers o...
  • Adafruit Ultimate GPS HAT for Raspberry Pi A+ or B+ Mini Kit
    Precio:  $9,469.00

    Adafruit Ultimate GPS HAT for Raspberry Pi A+ or B+ Mini Kit

    -Titulo Original : Adafruit Ultimate GPS HAT for Raspberry Pi A+ or B+ Mini Kit-Fabricante : ADAFRUIT-Descripcion Original: 165 dBm sensitivity, 10 Hz updates, 66 channels // Built in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off! // Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky view // Fix status LED blinks to let you know when the GPS has determined the current coordinates // Raspberry Pi *not* included // This new HAT from Adafruit adds their celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+ or B+ We spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more. Please note, this HAT takes over the Raspberry Pi's hardware UART to send/receive data to and from the GPS module. So, if you need to use the RX/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi. Read up on Adafruit's tutorial for more information on how to use this fine HAT. Comes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder. This HAT does not come with a 12mm coin battery! A CR1220 will let you use the real-time-clock capability of the GPS HAT...
  • RASPBERRY PI-SENSEHAT Raspberry Pi Sense HAT...
    Precio:  $5,959.00

    RASPBERRY PI-SENSEHAT Raspberry Pi Sense HAT...

    -Titulo Original : RASPBERRY-PI RASPBERRYPI-SENSEHAT Raspberry Pi Sense HAT with Orientation, Pressure, Humidity and Temperature Sensors-Fabricante : RASPBERRY PI-Descripcion Original: Price For: EachOrder Unit: Each 1 Core Architecture:: AVR Core Sub-Architecture:: - Features:: 8×8 LED Matrix Display, Accelero/Gyro/Magneto/Air Pressure/Temp/Humidity I2C Sensors, Teeny Joystick For Use With:: Raspberry Pi Single Board Computers Kit Contents:: Add-on Board ATtiny88 SVHC:: To Be Advised Silicon Core Number:: ATtiny88 Silicon Family Name:: ATtiny // Silicon Manufacturer:: Atmel // RASPBERRY-PI RASPBERRYPI-SENSEHAT Raspberry Pi Sense HAT with Orientation, Pressure, Humidity and Temperature Sensor...
  • Adafruit Aluminum Heat Sink for Raspberry Pi 3 - 14 x 14 x..
    Precio:  $919.00

    Adafruit Aluminum Heat Sink for Raspberry Pi 3 - 14 x 14 x..

    -Titulo Original : Adafruit Aluminum Heat Sink for Raspberry Pi 3 - 14 x 14 x 8mm [ADA3083]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 3083 // Stock Type: Components & Parts >> Heat Sinks // In Stock & Ready to Ship // Looking for a nice way to cool down your   Raspberry Pi 3 ? Check out this   This heat sink is made from high quality aluminum and will work perfectly with any   Raspberry Pi   but is best paired with a Raspberry Pi 3 since it can run a little hot. It comes with thermal adhesive already applied to the back making installation super easy. Clean the surface of the chip of any dust or grease then peel off the protective film and press the heat sink firmly onto the chip. You can use this heatsink with any of our   injection molded Adafruit Pi Enclosures , but it may not work with other enclosures and most HATs will not fit on top with the heat sink installed.We don't have formal specs for this heat sink, but when we ran 'stress -c 4' on the Pi 3 to run all 4 CPUs, a heat-sink-less Pi quickly dropped down to 0.96 GHz to maintain thermal equilibrium. With this heat sink installed, it could run at 1.1 GHz (so, approx 14% higher performance)Note that you do not   need   a heatsink for the Pi 3, it will automatically adjust its speed to avoid overheating! It can also, of course, be used for other processors and chips...
  • Adafruit Flex Cable for Raspberry Pi Camera - 300mm / 12...
    Precio:  $1,689.00

    Adafruit Flex Cable for Raspberry Pi Camera - 300mm / 12...

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 300mm / 12 [ADA1648]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1648 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 300mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well) Flex Cable for Raspberry Pi Camera - 300mm / 12 ( 7:45 ...
  • Raspberry Pi 3 A+ Computer Board
    Precio:  $5,539.00

    Raspberry Pi 3 A+ Computer Board

    -Titulo Original : Raspberry Pi 3 A+ Computer Board-Fabricante : RASPBERRY-Descripcion Original: Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz // 512MB LPDDR2 SDRAM // 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE // Extended 40-pin GPIO header // Full-size HDMI // 1.4GHz 64-bit quad-core processor, dual-band wireless LAN, Bluetooth 4.2/BLE in the same mechanical format as the Raspberry Pi 1 Model A...
  • Official Raspberry Pi 3 Case - Red/White
    Precio:  $1,699.00

    Official Raspberry Pi 3 Case - Red/White

    -Titulo Original : Official Raspberry Pi 3 Case - Red/White-Fabricante : RASPBERRY PI-Descripcion Original: Official case for the Raspberry Pi from the Raspberry Pi Foundation // Removable Lid provides easy access to the camera and display ports // Removable Side Panels with easy access to the GPIO port // Removable Top Frame // Designed with Pi HAT's in mind // Color: The Official Case of the Raspberry Pi Foundation has been refreshed for the Pi 3. Designed with HATs in mind and featuring multiple removable panels. Enclose your board as much or as little as necessary to best suit your latest project...
  • Raspberry Pi 3 Model B Board
    Precio:  $6,869.00

    Raspberry Pi 3 Model B Board

    -Titulo Original : Raspberry Pi 3 Model B Board-Fabricante : RASPBERRY PI-Descripcion Original: Raspberry pi 3 model b adds wireless LAN and Bluetooth connectivity making it the ideal solution for powerful connected designs. // Raspberry pi 3 use Processor chipest Boardcom BCM 2837 64 bIT ARMv7 Quad Core processor powered Singel Board Computer running at 1200MHz // Raspberry pi 3 model b RAM : 1GB SDRAM@400MHz //...
  • PiTFT Plus 3.2in Touchscreen for Raspberry Pi
    Precio:  $7,169.00

    PiTFT Plus 3.2in Touchscreen for Raspberry Pi

    -Titulo Original : 2616 - PiTFT Plus 3.2in Touchscreen for Raspberry Pi-Fabricante : ADAFRUIT-Descripcion Original: Touch screen for Raspberry Pi // Comes fully assembled // Great example code at Adafruit // Easy to use // Raspberry Pi _not_ included // This dipslay features a 3.2 display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top! This display is functionally the same as our classic PiTFT 2.8 and PiTFT Plus 2.8 - same pins used, same resolution, same drivers, but is just a bit bigger. It also has a 26- pins GPIO pins brought out so you can connect a 26-pin Raspberry Pi GPIO cable underneath. It's the same outline as a Pi 2/B+ it fits well on top of a Pi in our Raspberry Pi Enclosure base. The display and touchscreen uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since we had a tiny bit of space, there's 4 spots for optional slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button. See below for the link to get the optional tact switches, they're not included. Use it for console access or easily pop up X11 onto the PiTFT for a mini monitor, although its rather small at 320x240. Instead, we recommend using PyGame or other SDL-drawing programs to write onto the frame buffer. Raspberry Pi computer and enclosure not included! This display comes fully assembled, just plug it onto your Raspberry Pi and install our software to rock out. Check out our detailed tutorial on how to play videos, display images, and otherwise customize your PiTFT (the tutorial is identical to the 2.8 PiTFT...
  • Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit
    Precio:  $3,659.00

    Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit

    -Titulo Original : Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit-Fabricante : ADAFRUIT-Descripcion Original: Simple design - plug in power, plug in IDC cable, and run Adafruit's Python code. // Onboard level shifters to convert the RasPi's 3.3V to 5.0V logic for clean matrix driving. // Works with Adafruit 16x32, 32x32 or 32x64 RGB LED Matrices with HUB75 connections. You can even chain multiple matrices together for a longer display. // Included: RGB Matrix HAT controller. NOT Included: RGB LED Matrix (sold separately), Raspberry Pi, 5V power supply, or coin cell battery for Real Time Clock. (Real Time Clock not needed for unit to function) // You can now create a dazzling display with your Raspberry Pi Model A+/B+/Pi 2 or Pi 3 with the Adafruit RGB Matrix HAT. This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those we stock in the shop and create a colorful scrolling display or mini LED wall with ease. Each order comes with a HAT PCB with all surface mount parts assembled, a 2x20 female socket connector, a 2 pin terminal block, and a 2x8 IDC socket connector. A CR1220 coin cell is not included (required for real time clock). A 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A so pick up a 5V 4A power supply...
  • Raspberry Pi 7 Touchscreen Display
    Precio:  $12,939.00

    Raspberry Pi 7 Touchscreen Display

    -Titulo Original : Raspberry Pi 7 Touchscreen Display-Fabricante : RASPBERRY PI-Descripcion Original: Brand New in box. The product ships with all relevant accessories // Brand New in box. The product ships with all relevant accessorie...
  • Raspberry Pi Camera Module V2-8 Megapixel,1080p
    Precio:  $4,789.00

    Raspberry Pi Camera Module V2-8 Megapixel,1080p

    -Titulo Original : Raspberry Pi Camera Module V2-8 Megapixel,1080p-Fabricante : RASPBERRY PI-Descripcion Original: Second Generation Raspberry Pi Camera Module with Fixed Focus Lens // Sony Exmor IMX219 Sensor Capable of 4K30, 1080P60, 720P180, 8MP Still // 3280 (H) x 2464 (V) Active Pixel Count // Maximum of 1080P30 and 8MP Stills in Raspberry Pi Board // 2A Power Supply Highly Recommended // Color: The Raspberry Pi Camera V2 features the same, tiny footprint (25mm x 23mm x 9mm) as the original Pi Camera module, but features an upgraded Sony IMX219 image sensor which has a native resolution of 8 megapixels. The fixed-focus lens can capture 3280 x 2464 pixel images and 1080p30, 720p60 and 640x480p90 video. The Raspberry Pi Camera V2 connects to the CSi connector of your Raspberry Pi via a 15cm long flexible ribbon cable. It is plug-and-play compatible latest version of the Raspbian operating system making it perfect for time-lapse photography, recording video, motion detection, and security applications...
  • Game Hat Para Raspberry Pi A+/b+/2b/3b/3b+ 3.5 Ips 480x320
    Precio:  $9,939.00

    Game Hat Para Raspberry Pi A+/b+/2b/3b/3b+ 3.5 Ips 480x320

    -Titulo Original : Waveshare Game HAT for Raspberry Pi A+/B+/2B/3B/3B+ 3.5inch IPS Screen 480x320 Resolution 60 Frame Experience Make Your Own Game Console-Fabricante : Waveshare-Descripcion Original: Este GAME HAT convertirá tu Raspberry Pi en una consola de juegos clásica en un segundo, te recuerda todos los placeres de los juegos en la memoria. Pantalla IPS de 3.5 pulgadas, resolución 480 × 320, experiencia de 60 cuadros, visualización fluida, no más pérdida de cuadros Compatible con Raspberry Pi A + / B + / 2B / 3B / 3B + (Raspberry Pi Zero / Zero W / Zero WH requiere otro cable HDMI) Integra el circuito de carga de la batería, alimentado por una batería de litio 18650 (NO incluida), se reproduce en cualquier lugar en cualquier momento Indicador de capacidad de la batería Altavoz a bordo y conector para auriculares, escuche el BGM familiar de los viejos tiempo...
  • Raspberry Pi Sense HAT - AstroPi
    Precio:  $7,969.00

    Raspberry Pi Sense HAT - AstroPi

    -Titulo Original : 2483095 - Raspberry Pi Sense HAT - AstroPi-Fabricante : RASPBERRY PI-Descripcion Original: Works With All Raspberry PI boards // Accelerometer , Gyroscope , Thermometer // Humidity & Pressure Sensor All in One! // If you own a Raspberry Pi 1, 2 or a 3, you need this add-on! This fantastic shield has so much packed into such a small foot print. No need for external power input, as the shield pulls power from the Pi its self. Not only do you get an amazingly bright programmable 8x8 RGB matrix but you also get: -Accelerometer. -Gyroscope. -Magnetometer. -Pressure sensor. -Thermometer. -Humidity sensor. -Small multi-directional joystick. Product condition: Ne...
Mostrar del 1 al 24 (de 42 productos)
Páginas de Resultados:  1  2  [Siguiente >>]