Arriba

Componentes Electrónicos > Raspberry Pi

Mostrar: 
Mostrar del 1 al 24 (de 40 productos)
Páginas de Resultados:  1  2  [Siguiente >>] 
  • Adafruit Flex Cable for Raspberry Pi Camera - 2 meters...
    Precio:  $2,869.00

    Adafruit Flex Cable for Raspberry Pi Camera - 2 meters...

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 2 meters [ADA2144]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2144 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 2 meters long. We have cables in  a ton of sizes  so you can have the perfect fit. Each order comes with one cable,  Pi Camera  not included (but we have those in the shop as well) Please note, we did test this length cable with our Pi Model B/B+ and a Pi Camera and it worked great but 2 meters is really long for this kind of camera protocol, so if you have a very electrically noisy environment (inside a tesla coil?) you may have corrupted images...
  • Adafruit Flex Cable for Raspberry Pi Camera - 24 / 610mm
    Precio:  $2,289.00

    Adafruit Flex Cable for Raspberry Pi Camera - 24 / 610mm

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 24 / 610mm-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1731 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 24 / 610mm long We have cables in 2, 4, 8, 12, and 18 long so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well)...
  • Raspberry Pi 32gb Preloaded (noobs) Sd Card
    Precio:  $4,619.00

    Raspberry Pi 32gb Preloaded (noobs) Sd Card

    -Titulo Original : Raspberry Pi 32GB Preloaded (NOOBS) SD Card-Fabricante : RASPBERRY PI-Descripcion Original: Official 32GB MicroSD Card and Full-Size Adapter // Fully Qualified by the Raspberry Pi Foundation for Optimum Performance // Preloaded with the NOOBS Operating System // Works with all Raspberry Pi Models // Raspberry Pi Foundation Official 32GB MicroSD Card with Full-Size Adapter. Fully Qualified by the Raspberry Pi Foundation for Optimum Performance. Preloaded with the NOOBS Operating System. Works with all Raspberry Pi Models. SanDisk Ultra Class 10 MicroSD Card in OEM (black color) packaging...
  • Arduino Due sin encabezados A000056
    Precio:  $10,929.00

    Arduino Due sin encabezados A000056

    -Titulo Original : Arduino Due Without Headers A000056 -Fabricante : Arduino -Descripcion Original: ¡Arduino genuino! La Arduino Due es la primera placa Arduino basada en un microcontrolador de núcleo ARM de 32 bits. Con 54 pines de entrada / salida digital, 12 entradas analógicas, es la placa perfecta para proyectos de Arduino potentes a gran escala. 512 KB de memoria flash El Arduino Due es una placa de microcontrolador basada en la CPU Atmel SAM3X8E ARM Cortex-M3. Es la primera placa Arduino basada en un microcontrolador de núcleo ARM de 32 bits. Tiene 54 pines de entrada / salida digital (de los cuales 12 se pueden usar como salidas PWM), 12 entradas analógicas, 4 UART (puertos serie de hardware), un reloj de 84 MHz, una conexión USB OTG capaz, 2 DAC (digital a analógico) , 2 TWI, un conector de alimentación, un encabezado SPI, un encabezado JTAG, un botón de reinicio y un botón de borrado. Advertencia: a diferencia de la mayoría de las placas Arduino, la placa Arduino Due funciona a 3,3 V. El voltaje máximo que pueden tolerar los pines de E / S es de 3,3 V. La aplicación de voltajes superiores a 3,3 V a cualquier pin de E / S podría dañar la placa. La placa contiene todo lo necesario para soportar el microcontrolador; simplemente conéctelo a una computadora con un cable micro-USB o enciéndalo con un adaptador de CA a CC o una batería para comenzar. El Due es compatible con todos los protectores Arduino que funcionan a 3.3V y son compatibles con el pinout 1.0 Arduino. El Due sigue el pinout 1.0: TWI: pines SDA y SCL que están cerca del pin AREF. IOREF: permite un blindaje adjunto con la configuración adecuada para adaptarse a la tensión proporcionada por la placa. Esto permite la compatibilidad del escudo con una placa de 3,3 V como las placas basadas en Due y AVR que funcionan a 5 V. Un pin no conectado, reservado para uso futuro. ...
  • Raspberry Pi Sense HAT - AstroPi
    Precio:  $12,159.00

    Raspberry Pi Sense HAT - AstroPi

    -Titulo Original : 2483095 - Raspberry Pi Sense HAT - AstroPi-Fabricante : RASPBERRY PI-Descripcion Original: Works With All Raspberry PI boards // Accelerometer , Gyroscope , Thermometer // Humidity & Pressure Sensor All in One! // If you own a Raspberry Pi 1, 2 or a 3, you need this add-on! This fantastic shield has so much packed into such a small foot print. No need for external power input, as the shield pulls power from the Pi its self. Not only do you get an amazingly bright programmable 8x8 RGB matrix but you also get: -Accelerometer. -Gyroscope. -Magnetometer. -Pressure sensor. -Thermometer. -Humidity sensor. -Small multi-directional joystick. Product condition: Ne...
  • Adafruit Flex Cable for Raspberry Pi Camera - 1 meter...
    Precio:  $2,959.00

    Adafruit Flex Cable for Raspberry Pi Camera - 1 meter...

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 1 meter [ADA2143]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2143 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is 1 meter long. We have cables in a ton of sizes  so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well) Please note, we did test this length cable with our Pi Model B/B+ and a Pi Camera and it worked great but 1 meter is really long for this kind of camera protocol, so if you have a very electrically noisy environment (inside a tesla coil?) you may have corrupted images...
  • Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB.
    Precio:  $10,089.00

    Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB.

    -Titulo Original : Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB RAM, Linux)-Fabricante : RASPBERRY PI-Descripcion Original: Quad-core ARM Cortex-A7 CPU 0.9 GHz // 1GB SDRAM // Audio: 3.5 mm jack, Storage: microSD card slot, Network: 10/100 Mb/s // Power: Micro USB DC 5 V 800 mA for the Pi board // Style: The latest addition to the Raspberry Pi family, the Raspberry Pi 2 Model B takes the platform to a completely new level. Combining a six fold increase in processing power and a doubling of memory capacity with complete backward compatibility with the existing Model B Plus, Raspberry Pi 2 Model B is the perfect board for professionals and hobbyists alike. The new Raspberry Pi 2 Model B is jam packed with features. With a new quad core processor and twice the memory with a massive 1GB RAM. It's a whopping 6x faster than its predecessor. The ultra-low-cost, deck-of-cards sized Linux computer has had a makeover, and it's a good one at that. Required items to get up and running are: MicroSD card, Power Supply, Keyboard, Mouse, and HDMI compatible display. Note: The Raspberry Pi 2 boards by element14/Premier Farnell are Made in China (PRC) as well as United Kingdom...
  • Raspberry Pi 3 Model B Motherboard
    Precio:  $9,099.00

    Raspberry Pi 3 Model B Motherboard

    -Titulo Original : Raspberry Pi 3 Model B Motherboard-Fabricante : RASPBERRY PI-Descripcion Original: ✔ Modular Design: Modular designed Half cage for Fujifilm X-T3 and X-T2 Camera with battery grip // ✔ Dovetail Plate for Arca-Type: Compatible dovetail plate for Arca-Type with center marks on both axis // ✔ 2 Using Ways: The top plate can be removed, and the top plate and half cage can be used separately // ✔ Built-in Slot: Features a slot on the bottom allows to extend camera for tethering or cable release // ✔ Built-in Flat Screw Driver: Built-in flat screw driver on the bottom for quick adjustment // Color: A professional company specializing in camera accessories. A comprehensive enterprise integrating product design, research and development, sales and maintenance of camera accessories. Products are sold in the United States, China, Germany, France, Japan, Canada, Australia and other countries. We take high-quality products as the core and excellent customer service as our tenet.is a modular designed half cage with anti-twist flanges to keep the camera from twisting and provide multiple mounting points. Optional top plate is locked via a M4 screw and a shoe lock to prevent twisting.The top plate can be removed.The top plate and the half cage can be used separately.✔ The top plate comes with an arri 3/8”hole and integrate with a cold shoe for more accessories attachment if needed.✔ It features multiple 1/4-20 threaded holes on the side and bottom for accessory attachment, such as cold shoe 1593 for microphone.✔ Design for Fujifilm X-T3 with VG-XT3 Vertical Battery Grip✔ Design for Fujifilm X-T2 with VPB-XT2 Vertical Battery Grip✔ Product Dimensions: 108X 64X155mm✔ Package Dimensions: 143 x 100 x55mm✔ Net Weight: 190g✔ Package Weight: 235g✔ Material(s): Aluminum Alloy✔ 1 x Bottom Plate✔ 1 x Side Plate✔ 1 x Top Plate✔ 3 x M4 Screw✔ 1x Hex SpannerAt SMALLRIG, not only we offer high quality products,we back them up with 18-month warranty and a 30-day money back guarant...
  • Set De 4 Joystick Arcade Mame Raspberry Pi / Usb Pc
    Precio:  $28,489.00

    Set De 4 Joystick Arcade Mame Raspberry Pi / Usb Pc

    -Titulo Original : 4 Player LED Arcade DIY Kit for USB MAME PC Game DIY & Raspberry Pi Retro Controller DIY Including 4X Arcade Joystick, 40x LED Chrome Arcade Buttons 2X Zero Delay USB Encoder-Fabricante : EG STARTS-Descripcion Original: Este es un juego de piezas de bricolaje LED para proyectos de bricolaje para 2 jugadores. ¡El codificador admite todos los sistemas de Windows! Todas las partes no son originales de Sanwa. Recién hecho en piezas de China, todos los botones no son de metal. Si el LED no se enciende. Luego, cambie la interfaz del LED de ubicación. ¡Cada codificador tiene su propio cable USB para asegurarse de que el modo multijugador puede jugar en las mismas condiciones! ¡El Joystick es un joystick profesional de 8 vías! Los botones son botones LED de 5V iluminados con microinterruptores incorporados en el interior. Los botones predeterminados están iluminados todo el tiempo. Si compra uno de este artículo, ¿Qué incluirá en el paquete? Codificador USB 4x Zero Delay LED 4x cable USB 4x cables de 5 pines para Joystick 40x cables de 3 pines para botones LED Joystick 4x 5 pines de 8 vías (1x rojo, 1x amarillo, 1x azul, 1x verde) 1x 1 jugador más grande 5V LED cromo pulsadores (blanco) con lámpara LED y micro interruptor 1x 2 jugadores más grandes 5V LED botones de cromo (blanco) con lámpara LED y micro interruptor 1x 3 jugadores más grandes botones de cromo LED de 5V (blanco) con lámpara LED y micro interruptor 1x 4 jugadores más grandes 5V LED botones de cromo (blanco) con lámpara LED y micro interruptor 4x Coin Botones de cromo LED de 5V más grandes (blanco) con lámpara LED y micro interruptor 32x botones LED cromados de 5V más grandes con LED y micro interruptor (8x rojo, 8x amarillo, 8x azul, 8x verde) 1x instrucciones Consejos para la instalación. 1. Por favor lea nuestro manual de usuario antes de comenzar sus acciones de bricolaje. 2. ¡Es muy importante! Conecte el cable de 5 pines del Joystick a la ranura de 5 pines que se encuentra frente al terminal USB-B. Mucha gente conecta el joystick a la ranura incorrecta de 5 pines. 3. No es necesario separar las funciones del botón cuando conectas el cable a los botones y al panel de codificador, excepto que deseas agregar las funciones Auto-Fire, Tubro, Clear y Mode. Todas las funciones del botón de lucha pueden ser establecido en MAME o RetroPie. Las funciones Auto-Fire, Tubro, Clear y Mode tienen su propia ranura en la placa del codificador. 4. Para jugadores profesionales. Sugerimos que cambie todos los botones y joysticks a SANWA Brand o SEIMITSU Brand. Consejos para nuevos usuarios: 1. El artículo necesita trabajar con el emulador MAME. Entonces, antes de construir su propio proyecto, descargue uno para trabajar con las piezas. 2. Si usa este kit para construir sus propios proyectos de frambuesa Pi Retropie. Busque los pasos antes de su bricolaje...
  • RPI2-MODB-V1.2 - SBC, Raspberry PI 2 Model B V1.2
    Precio:  $11,219.00

    RPI2-MODB-V1.2 - SBC, Raspberry PI 2 Model B V1.2

    -Titulo Original : RPI2-MODB-V1.2 - SBC, Raspberry PI 2 Model B V1.2-Fabricante : RASPBERRY PI-Descripcion Original: Price For: Each Silicon Manufacturer: Broadcom Silicon Family Name: BCM2xxx Core Architecture: ARM Core Sub-Architecture: ARM8 Silicon Core Number: BCM2837 Kit Contents: Raspberry Pi 2 Model B Product Range: - // RPI2-MODB-V1.2 - SBC, RASPBERRY PI 2 MODEL B V1....
  • Raspberry Pi PWM Servo Hat Development Board
    Precio:  $4,239.00

    Raspberry Pi PWM Servo Hat Development Board

    -Titulo Original : 2327 - Raspberry Pi PWM Servo Hat Development Board-Fabricante : ADAFRUIT-Descripcion Original: The Adafruit 16-Channel 12-bit PWM/Servo HAT will drive up to 16 servos or PWM outputs over I2C with only 2 pins. The on-board PWM controller will drive all 16 channels simultaneously with no additional Raspberry Pi processing overhead. What's more, you can stack up to 62 of them to control up to 992 servos - all with the same 2 pins! // It can also do PWM up to 1.6 KHz with 12 bit precision, all completely free-running. // For use with Raspberry Pi Model A+ or B+, can be used with the Model A or B if you use a tall 2x13 header instead of the included 2x20. // Please note! This kit does not come with Raspberry Pi, servos, or required 5V power supply. // The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these signals, pop on this handy HAT! It adds the capability to control 16 Servos with perfect timing. It can also do PWM up to 1.6 KHz with 12 bit precision, all completely free-running. For use with Raspberry Pi Model A+ or B+, can be used with the Model A or B if you use a tall 2x13 header instead of the included 2x20. The Adafruit 16-Channel 12-bit PWM/Servo HAT will drive up to 16 servos or PWM outputs over I2C with only 2 pins. The on-board PWM controller will drive all 16 channels simultaneously with no additional Raspberry Pi processing overhead. What's more, you can stack up to 62 of them to control up to 992 servos - all with the same 2 pins! Best of all, we even have a Python library you can use, so you'll be up and running instantly, to make your robotic creation com to life. The Adafruit PWM/Servo HAT is the perfect solution for any project that requires a lot of servos or PWM outputs! Each order comes with a Servo HAT, a 2-pin terminal block, four 3x4 headers and a 2x20 socket header. You'll need to do some light through-hole soldering to attach the headers onto the HAT circuit board, but its easy to do with basic soldering tools like a soldering iron and rosin core electronics solder. If you would like to stack multiple HATs onto one Pi, you can also pick up a 2x20 stacking header and a set of right-angle 3x4 headers that should be soldered on instead. Please note! This kit does not come with Raspberry Pi, servos, or required 5V power supply...
  • Raspberry Pi 3 Model B Motherboard (element 14)
    Precio:  $14,519.00

    Raspberry Pi 3 Model B Motherboard (element 14)

    -Titulo Original : Raspberry Pi 3 Model B Motherboard (Element 14)-Fabricante : RASPBERRY PI-Descripcion Original: 1.2GHz 64-bit quad-core ARMv8 CPU, 1 GB RAM // 802.11n Wireless LAN, 10/100Mbps Lan Speed // Bluetooth 4.1, Bluetooth Low Energy // 4 USB ports, 40 GPIO pins, Full HDMI port, Combined 3.5mm audio jack and composite video // Camera interface (CSI),Display interface (DSI), Micro SD card slot (now push-pull rather than push-push), VideoCore IV 3D graphics core // Raspberry Pi 3 Model B Motherboar...
  • Dorhea Raspberry Pi 3 Model B+ Camera Module Automatic...
    Precio:  $7,139.00

    Dorhea Raspberry Pi 3 Model B+ Camera Module Automatic...

    -Titulo Original : Dorhea For Raspberry Pi 4 B 3 B Camera Module Automatic IR-Cut Switching Day/Night Vision Video Module Adjustable Focus 5MP OV5647 Sensor 1080p HD Webcam For Raspberry Pi 2/3 Model B Model A A-Fabricante : DORHEA-Descripcion Original: High Quality -- 100% brand new and in good condition,with high quality ,great performance, solid construction. // Camera Specifications -- The camera is capable of 2592 x 1944 pixel static images,and also supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording,with 5MP OV5647 1080p webcam sensor // IR-CUT Camera -- It's built-in IR-CUT camera,automatically switch day and night mode for better and clearer image during the day and night. // Compatible with Raspberry Pi camera module kit compatible with Raspberry Pi model B/B+/A+/4/3/2/1 // CSI Interface -- This interface uses the dedicated CSI interface, via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor // Specifications: CCD size: 1/4 inch Aperture(F): 1.8 Focal Length: 3.6 mm (adjustable) Field of View: 72 degrees Preferred Sensor Resolution: 1080p Support 3.3V power output Supports connecting infrared LED or flash LED 4 screw holes whiche are used for a fixed position Dimension: 1.42inch x1.04inch x0.94inch Read more Adjust the focal length : The lens screws in and out to adjust it. The camera is capable of 2592 x 1944 pixel static images,and also supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording,with 5MP OV5647 1080p webcam sensor. The camera is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system. Read more Raspberry Pi computer with a Camera Module port All current models of Raspberry Pi have a port for connecting the Camera Module. Note: If you want to use a Raspberry Pi Zero, you need a Camera Module ribbon cable that fits the Raspberry Pi Zero’s smaller Camera Module port. Read more Ensure your Raspberry Pi is turned off. Locate the Camera Module portGently pull up on the edges of the port’s plastic clipInsert the Camera Module ribbon cable; make sure the cable is the right way roundPush the plastic clip back into place Start up your Raspberry Pi. Go to the main menu and open the Raspberry Pi Configuration tool. Select the Interfaces tab and ensure that the camera is enabled Reboot your Raspberry Pi. Read mor...
  • Adafruit Small-Size Perma-Proto Raspberry Pi Breadboard PCB.
    Precio:  $2,719.00

    Adafruit Small-Size Perma-Proto Raspberry Pi Breadboard PCB.

    -Titulo Original : Adafruit Small-Size Perma-Proto Raspberry Pi Breadboard PCB Kit [ADA1171]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1171 // Stock Type: Raspberry Pi >> Prototyping >> Model A+, B+, & Pi 2 // In Stock & Ready to Ship // We put a PermaProto quarter-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the PermaProto for Pi! It has the Cobbler baked right in. Simply solder the 2x13 pin header in and you get all the labeled breakouts with tons of prototyping space, power rails, mounting holes and that gorgeous silk. Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: its always crummy quality, with pads that flake off and no labeling. Then we thought about how people actually prototype - usually starting with a solderless breadboard and then transferring the parts to a more permanent PCB. That's when we realized what people would really like is a proto board that makes it easy! This proto-board is the PCB you always wish you had, but never realized it! We took the basic layout of a quarter-sized breadboard (the PCB has 17 rows) and turned that into a beautiful PCB. The top side has a white silkscreen, and the same markings you're familiar with, to make transferring components easy. The bottom has a 4-hole pad design that matches a classic breadboard, with 4 power bus lines on the sides, and no mask so you can easily cut traces when necessary. We used 1.2mm diameter drill holes so even parts with big leads will fit. All holes are thru-plated for strength - these wont peel off with rework. The finish is a gold plate - you won't get oxidation like with bare copper perf ! There are also tons of mounting holes so you can attach the PCB to your project box. Comes with one PCB and one box header, you'll need to do a little light soldering to attach the box header to the PCB but its fast and easy to do. To connect it to a Pi, you'll also need a 26-pin GPIO cable if you don't already have one. Adafruit Small-Size Perma-Proto Raspberry Pi Breadboard PCB Kit ( 15:15 ...
  • Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
    Precio:  $6,799.00

    Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit

    -Titulo Original : Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit-Fabricante : ADAFRUIT-Descripcion Original: 4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC // Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) // Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping. // Big terminal block connectors to easily hook up wires (18-26AWG) and power // Works best with Raspberry Pi model A+, B+, or Pi 2, but can be used with a model A or B if you purchase a 2x13 extra-tall header and solder that instead of the 2x20 // Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins. In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include. Motors are controlled by TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time), a big improvement over L293D drivers and there are built-in flyback diodes as well. We even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit so all you have to do is solder on the included 2x20 plain header and the terminal blocks. Install the easy-to-use Python library, check out the examples and you're ready to go! Comes with an assembled & tested HAT, terminal blocks, and 2x20 plain header. Some soldering is required to assemble the headers o...
  • Raspberry Pi 3 Case - Black/Grey
    Precio:  $2,929.00

    Raspberry Pi 3 Case - Black/Grey

    -Titulo Original : Raspberry Pi 3 Case - Black/Grey-Fabricante : RASPBERRY PI-Descripcion Original: Official case for the Raspberry Pi from the Raspberry Pi Foundation // Removable Lid provides easy access to the camera and display ports // Removable Side Panels with easy access to the GPIO port // Removable Top Frame // Designed with Pi HAT's in mind // The Official Case of the Raspberry Pi Foundation has been refreshed for the Pi 3. Designed with HATs in mind and featuring multiple removable panels. Enclose your board as much or as little as necessary to best suit your latest project...
  • Raspberry Pi 3 Model B Board
    Precio:  $9,379.00

    Raspberry Pi 3 Model B Board

    -Titulo Original : Raspberry Pi 3 Model B Board-Fabricante : RASPBERRY PI-Descripcion Original: Raspberry pi 3 model b adds wireless LAN and Bluetooth connectivity making it the ideal solution for powerful connected designs. // Raspberry pi 3 use Processor chipest Boardcom BCM 2837 64 bIT ARMv7 Quad Core processor powered Singel Board Computer running at 1200MHz // Raspberry pi 3 model b RAM : 1GB SDRAM@400MHz //...
  • Set De 2 Joystick Arcade Mame Raspberry Pi / Usb Pc
    Precio:  $14,159.00

    Set De 2 Joystick Arcade Mame Raspberry Pi / Usb Pc

    -Titulo Original : Fosiya 2 Player Arcade Games Ellipse Oval Style 8 Ways Joystick + 20 x LED Chrome Arcade Buttons for Video Games Standard Controllers All Windows PC MAME Raspberry Pi (Mixed Colors Chrome Buttons)-Fabricante : Fosiya-Descripcion Original: Excellent Control USB Encoder. High Quality Ellipse Oval Style 8 way joystick. LED Buttons Good lighting effects. Perfect LED illuminated parts for 2 player Arcade MAME Jamma and other fighting game DIY Project! Made with highest quality materials! Heat resistant plastic! Environmentally friendly metal! Includes: 2 x 5Pin Arcade Joystick + 2 x USB Encoder + 20 x Chrome plated LED button (1 Player + 2 Player + 2x Coin button). Chrome LED Illuminated push buttons with build-in Blue switch inside, excellent electronic performance, long life, reliability tested to 3,000,000 cycles...
  • Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2...
    Precio:  $13,939.00

    Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2...

    -Titulo Original : Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2 [ADA2324]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2324 // Stock Type: Raspberry Pi >> Pi HATs & Plates >> Hats // In Stock & Ready to Ship // It's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+, B+, or Pi 2. Does not work with the Pi 3 at this time Here's the low-down on the GPS module:-165 dBm sensitivity, 10 Hz updates, 66 channelsOnly 20mA current drawBuilt in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off!PPS output on fix, by default connected to pin #4Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky viewFix status LED blinks to let you know when the GPS has determined the current coordinatesWe spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more. Please note, this HAT takes over the Raspberry Pi's hardware UART to send/receive data to and from the GPS module . So, if you need to use the RX/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi. Read up on our tutorial for more information on how to use this fine HAT Comes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder.  You can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top  or a  slim ultra-low-profile header...
  • Element14 Raspberry Pi 3 B+ Motherboard
    Precio:  $9,329.00

    Element14 Raspberry Pi 3 B+ Motherboard

    -Titulo Original : Element14 Raspberry Pi 3 B+ Motherboard-Fabricante : ELEMENT-Descripcion Original: 1.4GHz 64-bit quad-core ARMv8 CPU, 1 GB RAM // 802.11n Wireless LAN, 10/100Mbps Lan Speed // Bluetooth 4.2, Bluetooth Low Energy // 4 USB ports, 40 GPIO pins, Full HDMI port, Combined 3.5mm audio jack and composite video // Camera interface (CSI),Display interface (DSI), Micro SD card slot (now push-pull rather than push-push), VideoCore IV 3D graphics core // New Original Raspberry Pi 3 Model B+ Built-in Broadcom 1.4GHz quad-core 64 bit processor with Low Energy On-Board Wifi Bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity. To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2.5A adapter is required. Technical Specifications: - Broadcom BCM2837BO 64 bit ARMv8 QUAD Core A53 64bit Processor powered Single Board Computer run at 1.4GHz - 1GB RAM - BCM43143 WiFi on board - Bluetooth Low Energy (BLE) on board - 40 pin extended GPIO - 4 x USB2 ports - 4 pole Stereo output and Composite video port - Full size HDMI - CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - MicroSD port for loading your operating system and storing data - Upgraded switched Micro USB power source (now supports up to 2.5 Amps. Package Contents : - 1x Raspberry Pi 3 Model B...
  • RASPBERRY PI-SENSEHAT Raspberry Pi Sense HAT...
    Precio:  $8,599.00

    RASPBERRY PI-SENSEHAT Raspberry Pi Sense HAT...

    -Titulo Original : RASPBERRY-PI RASPBERRYPI-SENSEHAT Raspberry Pi Sense HAT with Orientation, Pressure, Humidity and Temperature Sensors-Fabricante : RASPBERRY PI-Descripcion Original: Price For: EachOrder Unit: Each 1 Core Architecture:: AVR Core Sub-Architecture:: - Features:: 8×8 LED Matrix Display, Accelero/Gyro/Magneto/Air Pressure/Temp/Humidity I2C Sensors, Teeny Joystick For Use With:: Raspberry Pi Single Board Computers Kit Contents:: Add-on Board ATtiny88 SVHC:: To Be Advised Silicon Core Number:: ATtiny88 Silicon Family Name:: ATtiny // Silicon Manufacturer:: Atmel // RASPBERRY-PI RASPBERRYPI-SENSEHAT Raspberry Pi Sense HAT with Orientation, Pressure, Humidity and Temperature Sensor...
  • Cable Flexible Flat 30 Pins 0.5mm Pitch 300mm (tipo A)
    Precio:  $2,239.00

    Cable Flexible Flat 30 Pins 0.5mm Pitch 300mm (tipo A)

    -Titulo Original : uxcell Flexible Flat Cable, 30 Pins 0.5mm Pitch 300mm FPC FFC Flexible Ribbon Cable for LCD TV Car Audio DVD Player Laptop (A Type) -Fabricante : uxcell -Descripcion Original: Reemplazo para el siguiente modelo de batería / números de pieza: CP-HK03. Destinado / Compatible con los siguientes modelos de altavoces Bluetooth: Harman Kardon Esquire 2, HKESQUIRE2BLK, HKESQUIRE2GLD, HKESQUIRE2GR. Paquete de baterías recargables de polímero de litio de 3.7V 2800mAh 10.36Wh...
  • Adafruit Smt Gpio Header For Raspberry Pi Hat - 2x20 Short.
    Precio:  $2,139.00

    Adafruit Smt Gpio Header For Raspberry Pi Hat - 2x20 Short.

    -Titulo Original : Adafruit SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header [ADA2187]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2187 // Stock Type: Raspberry Pi >> Raspberry Pi B+, Pi 2, & Pi 3 >> Prototyping // In Stock & Ready to Ship // For super-slim SMT designs, this custom-made, 2x20 short SMT female header can be used to plug a Raspberry Pi HAT onto a B+ or A+ or Pi 2. It's harder to use than the Thru-Hole type headers, but for the slickest, slimmest fit, this header is recommended...
  • Adafruit Flex Cable For Raspberry Pi Camsra O Display 300mm
    Precio:  $1,619.00

    Adafruit Flex Cable For Raspberry Pi Camsra O Display 300mm

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera or Display - 300mm / 12-Fabricante : ADAFRUIT-Descripcion Original: Dimensions: 50mm x 16mm (2" x 0.6") // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. // This cable is 50mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well) // Available in 50mm (2"), 100mm (4"), 200mm (8"), 300mm (12") Lengths // Raspberry Pi & Camera Board NOT included // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 50mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well...
Mostrar del 1 al 24 (de 40 productos)
Páginas de Resultados:  1  2  [Siguiente >>]