Arriba

Componentes Electrónicos > Raspberry Pi

Mostrar: 
Mostrar del 1 al 24 (de 48 productos)
Páginas de Resultados:  1  2  [Siguiente >>] 
  • PiTFT Plus 480x320 3.5 TFT+Touchscreen for Raspberry Pi - Pi
    Precio:  $8,789.00

    PiTFT Plus 480x320 3.5 TFT+Touchscreen for Raspberry Pi - Pi

    -Titulo Original : PiTFT Plus 480x320 3.5 TFT+Touchscreen for Raspberry Pi - Pi 2 and Model A+ / B+-Fabricante : ADAFRUIT-Descripcion Original: This PiTFT 3.5" is designed to fit nicely onto the Raspberry Pi 2 or Model A+ / B+, not compatible with original Model A and Model B // Comes fully assembled and ready to plug into your Pi! (See not below) // You can also have an HDMI display separately connected.(This may be required during initial setup) // Features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay // Important Note: This product requires configuration and driver setup to work correctly on the PI and is not "plug and play". Many users report a "white" screen indicating the PI has not been configured correctly. Please see Adafruit Documentation or contact the seller if you experience this issue. Raspberry Pi Not included // Color: Is this not the cutest, little display for the Raspberry Pi? It features a 3.5 display with 480x320 16-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered specifically to work with the Raspberry Pi 2 and the Model A+ / B+. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top! This PiTFT 3.5 is designed to fit nicely onto the Raspberry Pi 2 or Model A+ / B+. If you'd like to use a 3.5 display with the original Pi A or Pi B, check out this version The display uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. GPIO #18 can be used to PWM dim the backlight if you like. All other GPIO are unused. There's a 2x16 'classic Pi' connection GPIO header on the bottom, you can connect a 26-pin Pi GPIO cable to it to use any of the other pins as you like. The other GPIO are broken out into solder pads at the bottom, in case you want to use more of the GPIO. Best of all, it comes fully assembled and ready to plug into your Pi! You can use this as a display for running the X interface, or pygame. You can also have an HDMI display seperately connected. There's four mounting ears that can be used to attach the display & Pi to a bezel, or snap them off with pliers (they're perforated) for a slick exactly-the-same-size-as-a-Pi look. Adafruit created a custom kernel package based of off Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. Adafruit's tutorial shows you how to install the software, as well as calibrate the touchscreen, display images such as from your PiCam and more! Please visit Adafruit for more informatio...
  • Joystick Para Pc Xbox 360 Ps2 Juegos Ps3 Arcade (0h1t)
    Precio:  $2,959.00

    Joystick Para Pc Xbox 360 Ps2 Juegos Ps3 Arcade (0h1t)

    -Titulo Original : EG STARTS Red Arcade Classic Competition 5 Pin Stick 5P Rocker 4 - 8 Ways Joystick for PC Xbox 360 PS2 PS3 Games Arcade DIY Kit Parts Mame Jamma Machine Gaming-Fabricante : EG STARTS-Descripcion Original: Nuevo diseño de interfaz. Corrija la conexión incorrecta. Posicionamiento preciso y de alta calidad. Fácil de quitar la parte superior de la bola (rojo). Incluye: Red Ball Top + 5Pin Cable + Ontología independiente. Fácil de cambiar el modo de 4 vías y 8 vías (el valor predeterminado es cuadrado de 8 vías...
  • Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30
    Precio:  $5,729.00

    Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30

    -Titulo Original : Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30-Fabricante : RASPBERRY PI-Descripcion Original: Computer accessories, Computers | Electronics, Electronics | Peripherals and spares // Color:Multicolor Link to blog - how to get started with the camera module - with sample script ...
  • Raspberry Pi Zero W (Wireless) ( 2017 model)
    Precio:  $4,249.00

    Raspberry Pi Zero W (Wireless) ( 2017 model)

    -Titulo Original : Raspberry Pi Zero W (Wireless) ( 2017 model)-Fabricante : RASPBERRY PI-Descripcion Original: Raspberry Pi Zero W // SoC: Broadcom BCM2835--CPU: ARM11 running at 1GHz--RAM: 512MB // Wireless: 2.4GHz 802.11n wireless LAN (WiFi) // Bluetooth: Bluetooth Classic 4.1 and Bluetooth LE // Dimensions: 65mm × 30mm × 5mm // Dimensions: 65mm × 30mm × 5mm SoC: Broadcom BCM2835 CPU: ARM11 running at 1GHz RAM: 512MB Wireless: 2.4GHz 802.11n wireless LAN Bluetooth: Bluetooth Classic 4.1 and Bluetooth LE Power: 5V, supplied via micro USB connector Video & Audio: 1080P HD video & stereo audio via mini-HDMI connector Storage: MicroSD card Output: Micro USB GPIO: 40-pin GPIO, unpopulated Pins: Run mode, unpopulated; RCA composite, unpopulated Camera Serial Interface (CSI...
  • PiTFT Plus 3.2in Touchscreen for Raspberry Pi
    Precio:  $9,169.00

    PiTFT Plus 3.2in Touchscreen for Raspberry Pi

    -Titulo Original : 2616 - PiTFT Plus 3.2in Touchscreen for Raspberry Pi-Fabricante : ADAFRUIT-Descripcion Original: Touch screen for Raspberry Pi // Comes fully assembled // Great example code at Adafruit // Easy to use // Raspberry Pi _not_ included // This dipslay features a 3.2 display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top! This display is functionally the same as our classic PiTFT 2.8 and PiTFT Plus 2.8 - same pins used, same resolution, same drivers, but is just a bit bigger. It also has a 26- pins GPIO pins brought out so you can connect a 26-pin Raspberry Pi GPIO cable underneath. It's the same outline as a Pi 2/B+ it fits well on top of a Pi in our Raspberry Pi Enclosure base. The display and touchscreen uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since we had a tiny bit of space, there's 4 spots for optional slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button. See below for the link to get the optional tact switches, they're not included. Use it for console access or easily pop up X11 onto the PiTFT for a mini monitor, although its rather small at 320x240. Instead, we recommend using PyGame or other SDL-drawing programs to write onto the frame buffer. Raspberry Pi computer and enclosure not included! This display comes fully assembled, just plug it onto your Raspberry Pi and install our software to rock out. Check out our detailed tutorial on how to play videos, display images, and otherwise customize your PiTFT (the tutorial is identical to the 2.8 PiTFT...
  • Adafruit Flex Cable for Raspberry Pi Camera - 2 meters...
    Precio:  $2,049.00

    Adafruit Flex Cable for Raspberry Pi Camera - 2 meters...

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 2 meters [ADA2144]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2144 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 2 meters long. We have cables in  a ton of sizes  so you can have the perfect fit. Each order comes with one cable,  Pi Camera  not included (but we have those in the shop as well) Please note, we did test this length cable with our Pi Model B/B+ and a Pi Camera and it worked great but 2 meters is really long for this kind of camera protocol, so if you have a very electrically noisy environment (inside a tesla coil?) you may have corrupted images...
  • Element14 Raspberry Pi 3 B+ Motherboard
    Precio:  $8,499.00

    Element14 Raspberry Pi 3 B+ Motherboard

    -Titulo Original : Element14 Raspberry Pi 3 B+ Motherboard-Fabricante : ELEMENT-Descripcion Original: 1.4GHz 64-bit quad-core ARMv8 CPU, 1 GB RAM // 802.11n Wireless LAN, 10/100Mbps Lan Speed // Bluetooth 4.2, Bluetooth Low Energy // 4 USB ports, 40 GPIO pins, Full HDMI port, Combined 3.5mm audio jack and composite video // Camera interface (CSI),Display interface (DSI), Micro SD card slot (now push-pull rather than push-push), VideoCore IV 3D graphics core // New Original Raspberry Pi 3 Model B+ Built-in Broadcom 1.4GHz quad-core 64 bit processor with Low Energy On-Board Wifi Bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity. To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2.5A adapter is required. Technical Specifications: - Broadcom BCM2837BO 64 bit ARMv8 QUAD Core A53 64bit Processor powered Single Board Computer run at 1.4GHz - 1GB RAM - BCM43143 WiFi on board - Bluetooth Low Energy (BLE) on board - 40 pin extended GPIO - 4 x USB2 ports - 4 pole Stereo output and Composite video port - Full size HDMI - CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - MicroSD port for loading your operating system and storing data - Upgraded switched Micro USB power source (now supports up to 2.5 Amps. Package Contents : - 1x Raspberry Pi 3 Model B...
  • Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB.
    Precio:  $13,929.00

    Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB.

    -Titulo Original : Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB RAM, Linux)-Fabricante : RASPBERRY PI-Descripcion Original: Quad-core ARM Cortex-A7 CPU 0.9 GHz // 1GB SDRAM // Audio: 3.5 mm jack, Storage: microSD card slot, Network: 10/100 Mb/s // Power: Micro USB DC 5 V 800 mA for the Pi board // Style: The latest addition to the Raspberry Pi family, the Raspberry Pi 2 Model B takes the platform to a completely new level. Combining a six fold increase in processing power and a doubling of memory capacity with complete backward compatibility with the existing Model B Plus, Raspberry Pi 2 Model B is the perfect board for professionals and hobbyists alike. The new Raspberry Pi 2 Model B is jam packed with features. With a new quad core processor and twice the memory with a massive 1GB RAM. It's a whopping 6x faster than its predecessor. The ultra-low-cost, deck-of-cards sized Linux computer has had a makeover, and it's a good one at that. Required items to get up and running are: MicroSD card, Power Supply, Keyboard, Mouse, and HDMI compatible display. Note: The Raspberry Pi 2 boards by element14/Premier Farnell are Made in China (PRC) as well as United Kingdom...
  • Game Hat Para Raspberry Pi A+/b+/2b/3b/3b+ 3.5 Ips 480x320
    Precio:  $12,839.00

    Game Hat Para Raspberry Pi A+/b+/2b/3b/3b+ 3.5 Ips 480x320

    -Titulo Original : Waveshare Game HAT for Raspberry Pi A+/B+/2B/3B/3B+ 3.5inch IPS Screen 480x320 Resolution 60 Frame Experience Make Your Own Game Console-Fabricante : Waveshare-Descripcion Original: Este GAME HAT convertirá tu Raspberry Pi en una consola de juegos clásica en un segundo, te recuerda todos los placeres de los juegos en la memoria. Pantalla IPS de 3.5 pulgadas, resolución 480 × 320, experiencia de 60 cuadros, visualización fluida, no más pérdida de cuadros Compatible con Raspberry Pi A + / B + / 2B / 3B / 3B + (Raspberry Pi Zero / Zero W / Zero WH requiere otro cable HDMI) Integra el circuito de carga de la batería, alimentado por una batería de litio 18650 (NO incluida), se reproduce en cualquier lugar en cualquier momento Indicador de capacidad de la batería Altavoz a bordo y conector para auriculares, escuche el BGM familiar de los viejos tiempo...
  • ContempoViews Intermediate Starter Kit para Raspberry Pi B + 2 & 3 RPi Learning Kit 1210
    Precio:  $4,899.00

    ContempoViews Intermediate Starter Kit para Raspberry Pi B + 2 & 3 RPi Learning Kit 1210

    -Titulo Original : ContempoViews Intermediate Starter Kit for Raspberry Pi B+ 2 & 3 RPi Learning Kit 1210-Fabricante : Contempo Views-Descripcion Original: Advanced learning kit intended for those with some experience with RPi or Arduino // Over 35 different components // Nearly 100pcs in total // Numerous electronic components to enhance your Raspberry Pi experience // This is an advanced learning kit for Raspberry Pi. It is equipped with more interesting and powerful functional modules than the basic starter kit, and so it is more suitable for those who have already had some relevant knowledge. This advanced version provides more abundant learning materials and more space for creating some interesting interactive projects. Raspberry Pi is a credit card sized single-board computer, through which we can learn relevant knowledge about Linux operating systems as well as C and python language based on Raspberry Pi debian (based on linux) system, not to mention sensor/module applications on Raspberry Pi. Arduino and Raspberry Pi are a great match for each other. - 10MM Full color high-brightness sensor x 1 - Home appliances control module x 1 - Raspberry Pi GPIO V2 shield x 1 - High-quality 830 hole breadboard x 1 - MAX7219 dot matrix module x 1 - 9g servo x 1 - ULN2003 driving board x 1 - Black remote control x 1 - 5V step motor x 1 - 50K adjustable potentiometer x 1 - 801S vibration sensor x 1 - PS2 game rocker module x 1 - Four-bit digital tube x 1 - One-bit digital tube x 1 - 74H595 IC x 1 - Red LED x 5 - Blue LED x 5 - Yellow LED x 5 - 1K resistor x 5 - 10K resistor x 5 - 220R resistor x 8 - DHT11 Humiture sensor x 1 - DS3231 clock x 1 - PCF8591 AD/DA conversion module x1 - Yellow button cap x 4 - Infrared receiver component x 1 - LM35 component x 1 - Flame component x 1 - Ball component x 2 - Light-sensitive component x 3 - Mini LCD screen x 1 - 40Pin colorful flat cable x 1 - Membrane keypad x 1 - Dupont Cable x 30 - Male to female dupont cable/20-row x 1 - SR04 ultrasonic x ...
  • Raspberry Pi Zero 1.3 Camera Version
    Precio:  $5,439.00

    Raspberry Pi Zero 1.3 Camera Version

    -Titulo Original : Raspberry Pi Zero 1.3 Camera Version-Fabricante : RASPBERRY PI-Descripcion Original: Powerful processor, Tiny form factor // The Pi Zero packs a sizzling 1GHz single-core ARM 11 CPU with 512MB RAM. Despite its diminutive size, it’s 40 percent faster than the original Raspberry Pi model...
  • Adafruit Flex Cable for Raspberry Pi Camera - 1 meter...
    Precio:  $1,949.00

    Adafruit Flex Cable for Raspberry Pi Camera - 1 meter...

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 1 meter [ADA2143]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2143 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is 1 meter long. We have cables in a ton of sizes  so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well) Please note, we did test this length cable with our Pi Model B/B+ and a Pi Camera and it worked great but 1 meter is really long for this kind of camera protocol, so if you have a very electrically noisy environment (inside a tesla coil?) you may have corrupted images...
  • 2 Player Controller USB  Joystick MAME Raspberry Pi 1/2/3
    Precio:  $4,879.00

    2 Player Controller USB Joystick MAME Raspberry Pi 1/2/3

    -Titulo Original : Easyget 2 Player Zero Delay Generic Game Controller Usb To Joystick For Mame & Raspberry Pi 1/2/3 Retropie Diy Projects Support For Sanwa Parts-Fabricante : Easyget-Descripcion Original: Fan Included No Memory Series VENGEANCE RGB PRO Memory Type DDR4 Memory Size 128GB Kit (4 x 32GB) Tested Latency 16-20-20-38 Tested Voltage 1.35V Tested Speed 3200MHz Memory Color BLACK LED Lighting RGB Single Zone / Multi-Zone Lighting Individually Addressable SPD Latency 15-15-15-36 SPD Speed 2133MHz SPD Voltage 1.2V Speed Rating PC4-25600 (3200MHz) Compatibility Intel Z390,Intel X299 Heat Spreader Anodized Aluminum Package Memory Format DIMM Performance Profile XMP 2.0 Package Memory Pin 28...
  • Raspberry Pi Foundation Case For Model B+ & Raspberry Pi 2.
    Precio:  $2,289.00

    Raspberry Pi Foundation Case For Model B+ & Raspberry Pi 2.

    -Titulo Original : Raspberry Pi Foundation Case For Model B+ & Raspberry Pi 2 Model B Case For Raspberry Pi 3 Model B/B+-Fabricante : RASPBERRY PI-Descripcion Original: Official case for the Raspberry Pi from the Raspberry Pi Foundation // Removable Lid provides easy access to the camera and display ports // Removable Side Panels with easy access to the GPIO port // Removable Top Frame // Designed with Pi HAT's in mind // Official case for the Raspberry Pi from the Raspberry Pi Foundation 5 part enclosure Removable Lid for easy access to the camera and display ports Removable Top Frame Removable Side Panels with easy access to the GPIO port Designed with Pi HAT's in mind Dimensions: 96mm x 70mm x 25mm Compatible with the Raspberry Pi 2 Model B and Raspberry Pi Model B+ Note: Model A+ Boards will fit in this case however the USB port is recessed inside the case...
  • Raspberry Pi 3 Model B Motherboard (element 14)
    Precio:  $8,209.00

    Raspberry Pi 3 Model B Motherboard (element 14)

    -Titulo Original : Raspberry Pi 3 Model B Motherboard (Element 14)-Fabricante : RASPBERRY PI-Descripcion Original: 1.2GHz 64-bit quad-core ARMv8 CPU, 1 GB RAM // 802.11n Wireless LAN, 10/100Mbps Lan Speed // Bluetooth 4.1, Bluetooth Low Energy // 4 USB ports, 40 GPIO pins, Full HDMI port, Combined 3.5mm audio jack and composite video // Camera interface (CSI),Display interface (DSI), Micro SD card slot (now push-pull rather than push-push), VideoCore IV 3D graphics core // Raspberry Pi 3 Model B Motherboar...
  • Adafruit Aluminum Heat Sink for Raspberry Pi 3 - 15 x 15 x..
    Precio:  $1,519.00

    Adafruit Aluminum Heat Sink for Raspberry Pi 3 - 15 x 15 x..

    -Titulo Original : Adafruit Aluminum Heat Sink for Raspberry Pi 3 - 15 x 15 x 15mm [ADA3082]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 3082 // Stock Type: Components & Parts >> Heat Sinks // In Stock & Ready to Ship // Looking for the best heat sink for your Raspberry Pi 3 ? Check out this nice and tall This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi   but is best paired with a Raspberry Pi 3 since it can run a little hot. It comes with thermal adhesive already applied to the back making installation super easy. Clean the surface of the chip of any dust or grease then peel off the protective film and press the heat sink firmly onto the chip. You can use this heatsink with any of our injection molded Adafruit Pi Enclosures , but it may not work with other enclosures and most HATs will not fit on top with the heat sink installed.We don't have formal specs for this heat sink, but when we ran 'stress -c 4' on the Pi 3 to run all 4 CPUs, a heat-sink-less Pi quickly dropped down to 0.96 GHz to maintain thermal equilibrium. With this heat sink installed, it could run at 1.16GHz (so, 20% higher performance)Note that you do not need a heatsink for the Pi 3, it will automatically adjust its speed to avoid overheating! It can also, of course, be used for other processors and chips...
  • RASPBERRY - Box for Raspberry Pi RASPBERRY 10874
    Precio:  $3,749.00

    RASPBERRY - Box for Raspberry Pi RASPBERRY 10874

    -Titulo Original : RASPBERRY - Box for Raspberry Pi RASPBERRY 10874-Fabricante : RASPBERRY PI-Descripcion Original: Material: Plastic // Color: White/Red // Quantity: Single Pack // Made for Raspberry Pi 3 // Beautifully crafted, this red and white snap-together case is designed to protect your Raspberry Pi Model B. This 5-part enclosure has removable side panels to enable access to the GPIO...
  • Raspberry Pi 3 A+ Computer Board
    Precio:  $7,799.00

    Raspberry Pi 3 A+ Computer Board

    -Titulo Original : Raspberry Pi 3 A+ Computer Board-Fabricante : RASPBERRY-Descripcion Original: Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz // 512MB LPDDR2 SDRAM // 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE // Extended 40-pin GPIO header // Full-size HDMI // 1.4GHz 64-bit quad-core processor, dual-band wireless LAN, Bluetooth 4.2/BLE in the same mechanical format as the Raspberry Pi 1 Model A...
  • Set De 4 Joystick Arcade Mame Raspberry Pi / Usb Pc
    Precio:  $23,849.00

    Set De 4 Joystick Arcade Mame Raspberry Pi / Usb Pc

    -Titulo Original : 4 Player LED Arcade DIY Kit for USB MAME PC Game DIY & Raspberry Pi Retro Controller DIY Including 4X Arcade Joystick, 40x LED Chrome Arcade Buttons 2X Zero Delay USB Encoder-Fabricante : EG STARTS-Descripcion Original: Este es un juego de piezas de bricolaje LED para proyectos de bricolaje para 2 jugadores. ¡El codificador admite todos los sistemas de Windows! Todas las partes no son originales de Sanwa. Recién hecho en piezas de China, todos los botones no son de metal. Si el LED no se enciende. Luego, cambie la interfaz del LED de ubicación. ¡Cada codificador tiene su propio cable USB para asegurarse de que el modo multijugador puede jugar en las mismas condiciones! ¡El Joystick es un joystick profesional de 8 vías! Los botones son botones LED de 5V iluminados con microinterruptores incorporados en el interior. Los botones predeterminados están iluminados todo el tiempo. Si compra uno de este artículo, ¿Qué incluirá en el paquete? Codificador USB 4x Zero Delay LED 4x cable USB 4x cables de 5 pines para Joystick 40x cables de 3 pines para botones LED Joystick 4x 5 pines de 8 vías (1x rojo, 1x amarillo, 1x azul, 1x verde) 1x 1 jugador más grande 5V LED cromo pulsadores (blanco) con lámpara LED y micro interruptor 1x 2 jugadores más grandes 5V LED botones de cromo (blanco) con lámpara LED y micro interruptor 1x 3 jugadores más grandes botones de cromo LED de 5V (blanco) con lámpara LED y micro interruptor 1x 4 jugadores más grandes 5V LED botones de cromo (blanco) con lámpara LED y micro interruptor 4x Coin Botones de cromo LED de 5V más grandes (blanco) con lámpara LED y micro interruptor 32x botones LED cromados de 5V más grandes con LED y micro interruptor (8x rojo, 8x amarillo, 8x azul, 8x verde) 1x instrucciones Consejos para la instalación. 1. Por favor lea nuestro manual de usuario antes de comenzar sus acciones de bricolaje. 2. ¡Es muy importante! Conecte el cable de 5 pines del Joystick a la ranura de 5 pines que se encuentra frente al terminal USB-B. Mucha gente conecta el joystick a la ranura incorrecta de 5 pines. 3. No es necesario separar las funciones del botón cuando conectas el cable a los botones y al panel de codificador, excepto que deseas agregar las funciones Auto-Fire, Tubro, Clear y Mode. Todas las funciones del botón de lucha pueden ser establecido en MAME o RetroPie. Las funciones Auto-Fire, Tubro, Clear y Mode tienen su propia ranura en la placa del codificador. 4. Para jugadores profesionales. Sugerimos que cambie todos los botones y joysticks a SANWA Brand o SEIMITSU Brand. Consejos para nuevos usuarios: 1. El artículo necesita trabajar con el emulador MAME. Entonces, antes de construir su propio proyecto, descargue uno para trabajar con las piezas. 2. Si usa este kit para construir sus propios proyectos de frambuesa Pi Retropie. Busque los pasos antes de su bricolaje...
  • Raspberry Pi 3 Case - Black/Grey
    Precio:  $2,069.00

    Raspberry Pi 3 Case - Black/Grey

    -Titulo Original : Raspberry Pi 3 Case - Black/Grey-Fabricante : RASPBERRY PI-Descripcion Original: Official case for the Raspberry Pi from the Raspberry Pi Foundation // Removable Lid provides easy access to the camera and display ports // Removable Side Panels with easy access to the GPIO port // Removable Top Frame // Designed with Pi HAT's in mind // The Official Case of the Raspberry Pi Foundation has been refreshed for the Pi 3. Designed with HATs in mind and featuring multiple removable panels. Enclose your board as much or as little as necessary to best suit your latest project...
  • Raspberry Pi 3 Model B Board
    Precio:  $8,339.00

    Raspberry Pi 3 Model B Board

    -Titulo Original : Raspberry Pi 3 Model B Board-Fabricante : RASPBERRY PI-Descripcion Original: Raspberry pi 3 model b adds wireless LAN and Bluetooth connectivity making it the ideal solution for powerful connected designs. // Raspberry pi 3 use Processor chipest Boardcom BCM 2837 64 bIT ARMv7 Quad Core processor powered Singel Board Computer running at 1200MHz // Raspberry pi 3 model b RAM : 1GB SDRAM@400MHz //...
  • Adafruit Small-Size Perma-Proto Raspberry Pi Breadboard PCB.
    Precio:  $1,889.00

    Adafruit Small-Size Perma-Proto Raspberry Pi Breadboard PCB.

    -Titulo Original : Adafruit Small-Size Perma-Proto Raspberry Pi Breadboard PCB Kit [ADA1171]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1171 // Stock Type: Raspberry Pi >> Prototyping >> Model A+, B+, & Pi 2 // In Stock & Ready to Ship // We put a PermaProto quarter-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the PermaProto for Pi! It has the Cobbler baked right in. Simply solder the 2x13 pin header in and you get all the labeled breakouts with tons of prototyping space, power rails, mounting holes and that gorgeous silk. Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: its always crummy quality, with pads that flake off and no labeling. Then we thought about how people actually prototype - usually starting with a solderless breadboard and then transferring the parts to a more permanent PCB. That's when we realized what people would really like is a proto board that makes it easy! This proto-board is the PCB you always wish you had, but never realized it! We took the basic layout of a quarter-sized breadboard (the PCB has 17 rows) and turned that into a beautiful PCB. The top side has a white silkscreen, and the same markings you're familiar with, to make transferring components easy. The bottom has a 4-hole pad design that matches a classic breadboard, with 4 power bus lines on the sides, and no mask so you can easily cut traces when necessary. We used 1.2mm diameter drill holes so even parts with big leads will fit. All holes are thru-plated for strength - these wont peel off with rework. The finish is a gold plate - you won't get oxidation like with bare copper perf ! There are also tons of mounting holes so you can attach the PCB to your project box. Comes with one PCB and one box header, you'll need to do a little light soldering to attach the box header to the PCB but its fast and easy to do. To connect it to a Pi, you'll also need a 26-pin GPIO cable if you don't already have one. Adafruit Small-Size Perma-Proto Raspberry Pi Breadboard PCB Kit ( 15:15 ...
  • Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
    Precio:  $4,909.00

    Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit

    -Titulo Original : Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit-Fabricante : ADAFRUIT-Descripcion Original: 4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC // Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) // Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping. // Big terminal block connectors to easily hook up wires (18-26AWG) and power // Works best with Raspberry Pi model A+, B+, or Pi 2, but can be used with a model A or B if you purchase a 2x13 extra-tall header and solder that instead of the 2x20 // Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins. In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include. Motors are controlled by TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time), a big improvement over L293D drivers and there are built-in flyback diodes as well. We even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit so all you have to do is solder on the included 2x20 plain header and the terminal blocks. Install the easy-to-use Python library, check out the examples and you're ready to go! Comes with an assembled & tested HAT, terminal blocks, and 2x20 plain header. Some soldering is required to assemble the headers o...
  • Raspberry Pi 3 Model B+ Board (3b+)
    Precio:  $8,779.00

    Raspberry Pi 3 Model B+ Board (3b+)

    -Titulo Original : Raspberry Pi 3 Model B Board (3B)-Fabricante : Raspberry Pi-Descripcion Original: MARCADOR DE PUNTAS DOBLES: puntas gemelas amplias y finas para resaltar, dibujar y subrayar con precisión. Los marcadores finos se pueden usar para escribir y enganchar líneas, mientras que los marcadores gruesos son adecuados para dibujar y colorear. 88 COLORES VIBRANTES: los marcadores a base de agua tienen colores brillantes y buena transparencia. El marcador nunca se desvanecerá con el tiempo. Cada color es atractivo, lo que puede agregarle un toque de creatividad y diversión. 88 colores vivos pueden satisfacer todas sus necesidades. REGALO PERFECTO: el juego de rotuladores está equipado con un hermoso estuche negro que es fácil de transportar, viajar y almacenar. También es un regalo de Navidad ideal para niños, adolescentes, adultos, estudiantes, maestros, etc. USOS ILIMITADOS: los marcadores a menudo se usan para pintar en papel de cartulina más apretado o papel recubierto. Además, se puede utilizar en expresiones de arquitectura, interiorismo, diseño industrial y diseño de productos pintados a mano. SEGURO Y NO TÓXICO: 100% seguro para niños a partir de 3 años. Cada marcador no es tóxico. Los marcadores de alcohol de color Vigorfun 88 son permanentes y coloridos con puntas de doble cara. Los rotuladores son atractivos, los colores son brillantes y nunca se desvanecen. Los marcadores se pueden utilizar ampliamente, como papel para tarjetas, papel recubierto, diseño industrial, diseño de productos, etc. No solo pueden dibujar y colorear, sino también resaltar, dibujar y subrayar. Además, son seguros y no tóxicos, un gran regalo para niños, adolescentes y adultos. Caracteristicas Puntas de cincel ancho y punta fina Forma cuadrada del barril Fluido suave Cada marcador tiene su nombre y número de color El juego viene con una tarjeta de color. Todo viene en una hermosa bolsa negra con soporte Especificaciones 1.Marca: Vigorfun 2.Tamaño de los marcadores: 6.9 x 5.5 x 6.7 pulgadas (17.5 x 14 x 17 cm) 3.Marcadores de peso: 3,4 libras (1,56 kg) 4.Color: 88 colores. 5.Paquete: bolsa negra con soporte 6.Ingredientes: 64% de etanol anhidro, 18% de resina, 10% de disolvente negro, 8% de propilenglicol monometiléter 7.Usos: papel, tela, zapatos, artesanías, paredes, vidrio, piedra, madera, etc. CONSEJOS 1. Retirar la tapa no más de una hora. 2. Se recomienda cubrir la tapa inmediatamente después del uso: los marcadores no estarán secos; el color no se mezclará; larga vida útil 3. Si el marcador está seco, cubra la tapa y espere más de diez minutos...
Mostrar del 1 al 24 (de 48 productos)
Páginas de Resultados:  1  2  [Siguiente >>]