Arriba

Componentes Electrónicos > Raspberry Pi

Mostrar: 
Mostrar del 1 al 24 (de 40 productos)
Páginas de Resultados:  1  2  [Siguiente >>] 
  • Adafruit Smt Gpio Header For Raspberry Pi Hat - 2x20 Short.
    Precio:  $2,749.00

    Adafruit Smt Gpio Header For Raspberry Pi Hat - 2x20 Short.

    -Titulo Original : Adafruit SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header [ADA2187]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2187 // Stock Type: Raspberry Pi >> Raspberry Pi B+, Pi 2, & Pi 3 >> Prototyping // In Stock & Ready to Ship // For super-slim SMT designs, this custom-made, 2x20 short SMT female header can be used to plug a Raspberry Pi HAT onto a B+ or A+ or Pi 2. It's harder to use than the Thru-Hole type headers, but for the slickest, slimmest fit, this header is recommended...
  • Adafruit Flex Cable for Raspberry Pi Camera - 1 meter...
    Precio:  $2,919.00

    Adafruit Flex Cable for Raspberry Pi Camera - 1 meter...

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 1 meter [ADA2143]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2143 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is 1 meter long. We have cables in a ton of sizes  so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well) Please note, we did test this length cable with our Pi Model B/B+ and a Pi Camera and it worked great but 1 meter is really long for this kind of camera protocol, so if you have a very electrically noisy environment (inside a tesla coil?) you may have corrupted images...
  • Raspberry Pi 16GB Preloaded (Noobs) SD Card …
    Precio:  $4,949.00

    Raspberry Pi 16GB Preloaded (Noobs) SD Card …

    -Titulo Original : Raspberry Pi 16GB Preloaded (Noobs) SD Card …-Fabricante : RASPBERRY PI-Descripcion Original: Genuine 16GB SanDisk Ultra Class 10 MicroSD Card (Red/White) with adapter // Works with all Raspberry Pi Models // Fully Qualified by the Raspberry Pi Foundation for Optimum Performance // Preloaded with the NOOBS Operating System // Raspberry Pi 16GB Preloaded (NOOBS) SD Card &hellip...
  • Lente Arducam Para Camara Raspberry Pi Hq 8mm CS Lens
    Precio:  $6,959.00

    Lente Arducam Para Camara Raspberry Pi Hq 8mm CS Lens

    -Titulo Original : Arducam CS-Mount Lens For Raspberry Pi HQ Camera, 8mm Focal Length With Manual Focus-Fabricante : Arducam-Descripcion Original: Simplemente funciona: hemos probado este objetivo entre los muchos otros seleccionados en la cámara RPi HQ de 12 MP. Sin sombras de lentes, sin esquinas oscuras, calidad de imagen decente, simplemente funciona. - La alternativa inteligente: otra opción rentable que se suma a su módulo de cámara de alta calidad Raspberry Pi, con una distancia focal de 8 mm y enfoque manual - Arducam calificada: Arducam ha estado seleccionando y probando lentes CS en las cámaras Raspberry Pi desde la era de la cámara V1. Marque B012ETE75I si desea una cámara Pi de 5MP con lente CS y contáctenos para cámaras Pi de 8MP personalizadas con lentes CS. - Otras especificaciones: campo de visión horizontal de 50 grados (HFoV), formato óptico de lente de 1 / 2.3 , F / 1.4, dimensión: diam. 28 y # 215; 23 mm, peso: 40 g - Busque **** B088BGN5HC B088CQW11P para obtener el trípode y el cable de la cámara para la cámara de alta calidad Raspberry P...
  • 2 Player Controller USB  Joystick MAME Raspberry Pi 1/2/3
    Precio:  $8,239.00

    2 Player Controller USB Joystick MAME Raspberry Pi 1/2/3

    -Titulo Original : Easyget 2 Player Zero Delay Generic Game Controller Usb To Joystick For Mame & Raspberry Pi 1/2/3 Retropie Diy Projects Support For Sanwa Parts-Fabricante : Easyget-Descripcion Original: Fan Included No Memory Series VENGEANCE RGB PRO Memory Type DDR4 Memory Size 128GB Kit (4 x 32GB) Tested Latency 16-20-20-38 Tested Voltage 1.35V Tested Speed 3200MHz Memory Color BLACK LED Lighting RGB Single Zone / Multi-Zone Lighting Individually Addressable SPD Latency 15-15-15-36 SPD Speed 2133MHz SPD Voltage 1.2V Speed Rating PC4-25600 (3200MHz) Compatibility Intel Z390,Intel X299 Heat Spreader Anodized Aluminum Package Memory Format DIMM Performance Profile XMP 2.0 Package Memory Pin 28...
  • RASPBERRY - Box for Raspberry Pi RASPBERRY 10874
    Precio:  $3,199.00

    RASPBERRY - Box for Raspberry Pi RASPBERRY 10874

    -Titulo Original : RASPBERRY - Box for Raspberry Pi RASPBERRY 10874-Fabricante : RASPBERRY PI-Descripcion Original: Material: Plastic // Color: White/Red // Quantity: Single Pack // Made for Raspberry Pi 3 // Beautifully crafted, this red and white snap-together case is designed to protect your Raspberry Pi Model B. This 5-part enclosure has removable side panels to enable access to the GPIO...
  • ContempoViews Intermediate Starter Kit para Raspberry Pi B + 2 & 3 RPi Learning Kit 1210
    Precio:  $13,279.00

    ContempoViews Intermediate Starter Kit para Raspberry Pi B + 2 & 3 RPi Learning Kit 1210

    -Titulo Original : ContempoViews Intermediate Starter Kit for Raspberry Pi B+ 2 & 3 RPi Learning Kit 1210-Fabricante : Contempo Views-Descripcion Original: Advanced learning kit intended for those with some experience with RPi or Arduino // Over 35 different components // Nearly 100pcs in total // Numerous electronic components to enhance your Raspberry Pi experience // This is an advanced learning kit for Raspberry Pi. It is equipped with more interesting and powerful functional modules than the basic starter kit, and so it is more suitable for those who have already had some relevant knowledge. This advanced version provides more abundant learning materials and more space for creating some interesting interactive projects. Raspberry Pi is a credit card sized single-board computer, through which we can learn relevant knowledge about Linux operating systems as well as C and python language based on Raspberry Pi debian (based on linux) system, not to mention sensor/module applications on Raspberry Pi. Arduino and Raspberry Pi are a great match for each other. - 10MM Full color high-brightness sensor x 1 - Home appliances control module x 1 - Raspberry Pi GPIO V2 shield x 1 - High-quality 830 hole breadboard x 1 - MAX7219 dot matrix module x 1 - 9g servo x 1 - ULN2003 driving board x 1 - Black remote control x 1 - 5V step motor x 1 - 50K adjustable potentiometer x 1 - 801S vibration sensor x 1 - PS2 game rocker module x 1 - Four-bit digital tube x 1 - One-bit digital tube x 1 - 74H595 IC x 1 - Red LED x 5 - Blue LED x 5 - Yellow LED x 5 - 1K resistor x 5 - 10K resistor x 5 - 220R resistor x 8 - DHT11 Humiture sensor x 1 - DS3231 clock x 1 - PCF8591 AD/DA conversion module x1 - Yellow button cap x 4 - Infrared receiver component x 1 - LM35 component x 1 - Flame component x 1 - Ball component x 2 - Light-sensitive component x 3 - Mini LCD screen x 1 - 40Pin colorful flat cable x 1 - Membrane keypad x 1 - Dupont Cable x 30 - Male to female dupont cable/20-row x 1 - SR04 ultrasonic x ...
  • Game Hat Para Raspberry Pi A+/b+/2b/3b/3b+ 3.5 Ips 480x320
    Precio:  $23,909.00

    Game Hat Para Raspberry Pi A+/b+/2b/3b/3b+ 3.5 Ips 480x320

    -Titulo Original : Waveshare Game HAT for Raspberry Pi A+/B+/2B/3B/3B+ 3.5inch IPS Screen 480x320 Resolution 60 Frame Experience Make Your Own Game Console-Fabricante : Waveshare-Descripcion Original: Este GAME HAT convertirá tu Raspberry Pi en una consola de juegos clásica en un segundo, te recuerda todos los placeres de los juegos en la memoria. Pantalla IPS de 3.5 pulgadas, resolución 480 × 320, experiencia de 60 cuadros, visualización fluida, no más pérdida de cuadros Compatible con Raspberry Pi A + / B + / 2B / 3B / 3B + (Raspberry Pi Zero / Zero W / Zero WH requiere otro cable HDMI) Integra el circuito de carga de la batería, alimentado por una batería de litio 18650 (NO incluida), se reproduce en cualquier lugar en cualquier momento Indicador de capacidad de la batería Altavoz a bordo y conector para auriculares, escuche el BGM familiar de los viejos tiempo...
  • Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
    Precio:  $7,429.00

    Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit

    -Titulo Original : Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit-Fabricante : ADAFRUIT-Descripcion Original: 4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC // Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) // Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping. // Big terminal block connectors to easily hook up wires (18-26AWG) and power // Works best with Raspberry Pi model A+, B+, or Pi 2, but can be used with a model A or B if you purchase a 2x13 extra-tall header and solder that instead of the 2x20 // Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins. In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include. Motors are controlled by TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time), a big improvement over L293D drivers and there are built-in flyback diodes as well. We even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit so all you have to do is solder on the included 2x20 plain header and the terminal blocks. Install the easy-to-use Python library, check out the examples and you're ready to go! Comes with an assembled & tested HAT, terminal blocks, and 2x20 plain header. Some soldering is required to assemble the headers o...
  • Lente Arducam Para Camara Raspberry Pi Hq 12mm CS Lens
    Precio:  $10,039.00

    Lente Arducam Para Camara Raspberry Pi Hq 12mm CS Lens

    -Titulo Original : Arducam CS-Mount Lens For Raspberry Pi HQ Camera, 12mm Focal Length With Manual Focus And Adjustable Aperture-Fabricante : Arducam-Descripcion Original: Simplemente funciona: hemos probado este objetivo entre los muchos otros seleccionados en la cámara RPi HQ de 12 MP. Sin sombras de lentes, sin esquinas oscuras, calidad de imagen decente, simplemente funciona. - La alternativa sabia: otra opción rentable que se suma a su módulo de cámara de alta calidad Raspberry Pi, con una distancia focal de 12 mm, enfoque manual y apertura ajustable. - Arducam calificada: Arducam ha estado seleccionando y probando lentes CS en las cámaras Raspberry Pi desde la era de la cámara V1. Marque B012ETE75I si desea una cámara Pi de 5MP con lente CS y contáctenos para cámaras Pi de 8MP personalizadas con lentes CS. - Otras especificaciones: campo de visión horizontal de 30 grados (HFoV), formato óptico de lente de 1 / 2.3 , F / 1.6, dimensión: diam. 30 y # 215; 29 mm, peso: 53 g - Busque **** B088BGN5HC B088CQW11P para obtener el trípode y el cable de la cámara para la cámara de alta calidad Raspberry P...
  • Arduino Due sin encabezados A000056
    Precio:  $13,999.00

    Arduino Due sin encabezados A000056

    -Titulo Original : Arduino Due Without Headers A000056 -Fabricante : Arduino -Descripcion Original: ¡Arduino genuino! La Arduino Due es la primera placa Arduino basada en un microcontrolador de núcleo ARM de 32 bits. Con 54 pines de entrada / salida digital, 12 entradas analógicas, es la placa perfecta para proyectos de Arduino potentes a gran escala. 512 KB de memoria flash El Arduino Due es una placa de microcontrolador basada en la CPU Atmel SAM3X8E ARM Cortex-M3. Es la primera placa Arduino basada en un microcontrolador de núcleo ARM de 32 bits. Tiene 54 pines de entrada / salida digital (de los cuales 12 se pueden usar como salidas PWM), 12 entradas analógicas, 4 UART (puertos serie de hardware), un reloj de 84 MHz, una conexión USB OTG capaz, 2 DAC (digital a analógico) , 2 TWI, un conector de alimentación, un encabezado SPI, un encabezado JTAG, un botón de reinicio y un botón de borrado. Advertencia: a diferencia de la mayoría de las placas Arduino, la placa Arduino Due funciona a 3,3 V. El voltaje máximo que pueden tolerar los pines de E / S es de 3,3 V. La aplicación de voltajes superiores a 3,3 V a cualquier pin de E / S podría dañar la placa. La placa contiene todo lo necesario para soportar el microcontrolador; simplemente conéctelo a una computadora con un cable micro-USB o enciéndalo con un adaptador de CA a CC o una batería para comenzar. El Due es compatible con todos los protectores Arduino que funcionan a 3.3V y son compatibles con el pinout 1.0 Arduino. El Due sigue el pinout 1.0: TWI: pines SDA y SCL que están cerca del pin AREF. IOREF: permite un blindaje adjunto con la configuración adecuada para adaptarse a la tensión proporcionada por la placa. Esto permite la compatibilidad del escudo con una placa de 3,3 V como las placas basadas en Due y AVR que funcionan a 5 V. Un pin no conectado, reservado para uso futuro. ...
  • Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2...
    Precio:  $17,779.00

    Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2...

    -Titulo Original : Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2 [ADA2324]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2324 // Stock Type: Raspberry Pi >> Pi HATs & Plates >> Hats // In Stock & Ready to Ship // It's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+, B+, or Pi 2. Does not work with the Pi 3 at this time Here's the low-down on the GPS module:-165 dBm sensitivity, 10 Hz updates, 66 channelsOnly 20mA current drawBuilt in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off!PPS output on fix, by default connected to pin #4Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky viewFix status LED blinks to let you know when the GPS has determined the current coordinatesWe spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more. Please note, this HAT takes over the Raspberry Pi's hardware UART to send/receive data to and from the GPS module . So, if you need to use the RX/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi. Read up on our tutorial for more information on how to use this fine HAT Comes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder.  You can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top  or a  slim ultra-low-profile header...
  • Adafruit Flex Cable for Raspberry Pi Camera - 24 / 610mm
    Precio:  $2,439.00

    Adafruit Flex Cable for Raspberry Pi Camera - 24 / 610mm

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 24 / 610mm-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1731 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 24 / 610mm long We have cables in 2, 4, 8, 12, and 18 long so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well)...
  • Adafruit 1115 Blue White 16x2 LCDKeypad Kit For Raspberry Pi
    Precio:  $7,789.00

    Adafruit 1115 Blue White 16x2 LCDKeypad Kit For Raspberry Pi

    -Titulo Original : Adafruit Blue&White 16x2 LCDKeypad Kit For Raspberry Pi [ADA1115]-Fabricante : Adafruit-Descripcion Original: Unfortunately, LCDs require quite a few digital pins, 6 to control the LCD and then another 1 to control the backlight for a total of 7 pins. That's nearly all the GPIO available on a Pi! With this in mind, Adafruit devised a Pi plate that lets you control a 16x2 Character LCD, up to 3 backlight pins AND 5 keypad pins using only the two I2C pins on the R-Pi! The best part is you don't really lose those two pins either, since you can stick i2c-based sensors, RTCs, etc and have them share the I2C bus. This is a super slick way to add a display without all the wiring hassle. This Pi plate has been updated so the buttons on on the right side, which makes it a little more mechanically stable. It is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer. Item Specifics Dimensions: 2.2 x 3.35 Plug and play with any Raspberry Pi Uses only the I2C (SDA/SCL) pins This board/chip uses I2C 7-bit address 0x20. Kit Includes: Hight quality PCB 16x2 Blue and White LCD All components (buttons, headers, etc...
  • Set De 4 Joystick Arcade Mame Raspberry Pi / Usb Pc
    Precio:  $38,449.00

    Set De 4 Joystick Arcade Mame Raspberry Pi / Usb Pc

    -Titulo Original : 4 Player LED Arcade DIY Kit for USB MAME PC Game DIY & Raspberry Pi Retro Controller DIY Including 4X Arcade Joystick, 40x LED Chrome Arcade Buttons 2X Zero Delay USB Encoder-Fabricante : EG STARTS-Descripcion Original: Este es un juego de piezas de bricolaje LED para proyectos de bricolaje para 2 jugadores. ¡El codificador admite todos los sistemas de Windows! Todas las partes no son originales de Sanwa. Recién hecho en piezas de China, todos los botones no son de metal. Si el LED no se enciende. Luego, cambie la interfaz del LED de ubicación. ¡Cada codificador tiene su propio cable USB para asegurarse de que el modo multijugador puede jugar en las mismas condiciones! ¡El Joystick es un joystick profesional de 8 vías! Los botones son botones LED de 5V iluminados con microinterruptores incorporados en el interior. Los botones predeterminados están iluminados todo el tiempo. Si compra uno de este artículo, ¿Qué incluirá en el paquete? Codificador USB 4x Zero Delay LED 4x cable USB 4x cables de 5 pines para Joystick 40x cables de 3 pines para botones LED Joystick 4x 5 pines de 8 vías (1x rojo, 1x amarillo, 1x azul, 1x verde) 1x 1 jugador más grande 5V LED cromo pulsadores (blanco) con lámpara LED y micro interruptor 1x 2 jugadores más grandes 5V LED botones de cromo (blanco) con lámpara LED y micro interruptor 1x 3 jugadores más grandes botones de cromo LED de 5V (blanco) con lámpara LED y micro interruptor 1x 4 jugadores más grandes 5V LED botones de cromo (blanco) con lámpara LED y micro interruptor 4x Coin Botones de cromo LED de 5V más grandes (blanco) con lámpara LED y micro interruptor 32x botones LED cromados de 5V más grandes con LED y micro interruptor (8x rojo, 8x amarillo, 8x azul, 8x verde) 1x instrucciones Consejos para la instalación. 1. Por favor lea nuestro manual de usuario antes de comenzar sus acciones de bricolaje. 2. ¡Es muy importante! Conecte el cable de 5 pines del Joystick a la ranura de 5 pines que se encuentra frente al terminal USB-B. Mucha gente conecta el joystick a la ranura incorrecta de 5 pines. 3. No es necesario separar las funciones del botón cuando conectas el cable a los botones y al panel de codificador, excepto que deseas agregar las funciones Auto-Fire, Tubro, Clear y Mode. Todas las funciones del botón de lucha pueden ser establecido en MAME o RetroPie. Las funciones Auto-Fire, Tubro, Clear y Mode tienen su propia ranura en la placa del codificador. 4. Para jugadores profesionales. Sugerimos que cambie todos los botones y joysticks a SANWA Brand o SEIMITSU Brand. Consejos para nuevos usuarios: 1. El artículo necesita trabajar con el emulador MAME. Entonces, antes de construir su propio proyecto, descargue uno para trabajar con las piezas. 2. Si usa este kit para construir sus propios proyectos de frambuesa Pi Retropie. Busque los pasos antes de su bricolaje...
  • Adafruit Flex Cable For Raspberry Pi Camsra O Display 300mm
    Precio:  $2,289.00
    Expira: 16/01/2022

    Adafruit Flex Cable For Raspberry Pi Camsra O Display 300mm

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera or Display - 300mm / 12-Fabricante : ADAFRUIT-Descripcion Original: Dimensions: 50mm x 16mm (2" x 0.6") // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. // This cable is 50mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well) // Available in 50mm (2"), 100mm (4"), 200mm (8"), 300mm (12") Lengths // Raspberry Pi & Camera Board NOT included // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 50mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well...
  • Official Raspberry Pi 3 Case - Red/White
    Precio:  $3,499.00
    Expira: 07/08/2021

    Official Raspberry Pi 3 Case - Red/White

    -Titulo Original : Official Raspberry Pi 3 Case - Red/White-Fabricante : RASPBERRY PI-Descripcion Original: Official case for the Raspberry Pi from the Raspberry Pi Foundation // Removable Lid provides easy access to the camera and display ports // Removable Side Panels with easy access to the GPIO port // Removable Top Frame // Designed with Pi HAT's in mind // Color: The Official Case of the Raspberry Pi Foundation has been refreshed for the Pi 3. Designed with HATs in mind and featuring multiple removable panels. Enclose your board as much or as little as necessary to best suit your latest project...
  • Pantalla modulo lcd 20 x 4 - Raspberry Pi Arduino Uno
    Precio:  $4,399.00

    Pantalla modulo lcd 20 x 4 - Raspberry Pi Arduino Uno

    -Titulo Original : GeeekPi LCD 2004 Module With I2C Interface Adapter Blue Backlight 2004 20x4 LCD Module Shield For Raspberry Pi Arduino Uno-Fabricante : GeeekPi-Descripcion Original: - Kit de accesorios de repuesto ILIFE V8s, compatible con el robot aspirador ILIFE V8s y el robot aspirador Ilife V80 Max. Estas piezas no son universales, son solo para ILIFE V8 y Ilife Robot Vacuum v80 Max - El kit de consumibles de buena calidad para la aspiradora robótica ILIFE v8s con trapeador de piso mantiene su aspiradora al máximo rendimiento - Muy fácil de quitar y reemplazar estas piezas de repuesto de ILIFE, no se requieren herramientas para reemplazar las piezas de repuesto de ILIFE v80 Max Pop / ILIFE v80 Max Filter / ILIFE v8s - Piezas de repuesto para aspiradoras ILIFE V8s / ILIFE v80 Las piezas de repuesto deben reemplazarse cada dos meses, también depende de su uso Compatible con: ilife v8s robot aspirador y fregona ilife v80 robot aspirador Estas piezas de repuesto de ilife incluyen, 4 piezas * filtros hepa 4 piezas * ropa de fregona 3 pares * cepillos laterales 1 pieza * regalo gratis - cepillo pequeño Declaración: Nuestros productos son los accesorios de repuesto para ILIFE, no los originales. La marca ILIFE es la marca registrada del propietario respectivo. Cualquier uso de la marca, modelo o designación de pieza de ILIFE en nuestro listado tiene como fin demostrar la compatibilidad...
  • Set De 4 Joystick Arcade oval  Mame Raspberry Pi / Usb Pc
    Precio:  $38,199.00

    Set De 4 Joystick Arcade oval Mame Raspberry Pi / Usb Pc

    -Titulo Original : Fosiya 4 Player LED Arcade Kit Ellipse Oval Style Joystick USB Encoder To PC Games DIY Controllers Bat Joystick 4 Colors LED Arcade Buttons For All Windows PC MAME Raspberry Pi-Fabricante : Fosiya-Descripcion Original: alidad: Codificador USB de excelente control. Joystick de 8 vías de estilo elipse ovalado de alta calidad. Botones LED Buenos efectos de iluminación. ¡Piezas iluminadas con LED perfectas para 4 jugadores Arcade MAME Jamma y otro juego de lucha DIY Project Fabricado con materiales de primera calidad , Plástico resistente al calor! ¡Metal ecológico Incluye: Joystick Arcade de 4 x 5 pines + 4 x Codificador USB + Botones LED más grandes de 32 x 28 mm + Botones LED pequeños de 8 x 24 mm. Botones pulsadores iluminados por LED de 5 V con interruptor incorporado en el interior, excelente rendimiento electrónico, larga vida útil, confiabilidad probada a 3.000.000 de ciclos...
  • Adafruit Flex Cable for Raspberry Pi Camera - 300mm / 12...
    Precio:  $1,969.00

    Adafruit Flex Cable for Raspberry Pi Camera - 300mm / 12...

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 300mm / 12 [ADA1648]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1648 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 300mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well) Flex Cable for Raspberry Pi Camera - 300mm / 12 ( 7:45 ...
  • Raspberry Pi PWM Servo Hat Development Board
    Precio:  $6,739.00

    Raspberry Pi PWM Servo Hat Development Board

    -Titulo Original : 2327 - Raspberry Pi PWM Servo Hat Development Board-Fabricante : ADAFRUIT-Descripcion Original: The Adafruit 16-Channel 12-bit PWM/Servo HAT will drive up to 16 servos or PWM outputs over I2C with only 2 pins. The on-board PWM controller will drive all 16 channels simultaneously with no additional Raspberry Pi processing overhead. What's more, you can stack up to 62 of them to control up to 992 servos - all with the same 2 pins! // It can also do PWM up to 1.6 KHz with 12 bit precision, all completely free-running. // For use with Raspberry Pi Model A+ or B+, can be used with the Model A or B if you use a tall 2x13 header instead of the included 2x20. // Please note! This kit does not come with Raspberry Pi, servos, or required 5V power supply. // The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these signals, pop on this handy HAT! It adds the capability to control 16 Servos with perfect timing. It can also do PWM up to 1.6 KHz with 12 bit precision, all completely free-running. For use with Raspberry Pi Model A+ or B+, can be used with the Model A or B if you use a tall 2x13 header instead of the included 2x20. The Adafruit 16-Channel 12-bit PWM/Servo HAT will drive up to 16 servos or PWM outputs over I2C with only 2 pins. The on-board PWM controller will drive all 16 channels simultaneously with no additional Raspberry Pi processing overhead. What's more, you can stack up to 62 of them to control up to 992 servos - all with the same 2 pins! Best of all, we even have a Python library you can use, so you'll be up and running instantly, to make your robotic creation com to life. The Adafruit PWM/Servo HAT is the perfect solution for any project that requires a lot of servos or PWM outputs! Each order comes with a Servo HAT, a 2-pin terminal block, four 3x4 headers and a 2x20 socket header. You'll need to do some light through-hole soldering to attach the headers onto the HAT circuit board, but its easy to do with basic soldering tools like a soldering iron and rosin core electronics solder. If you would like to stack multiple HATs onto one Pi, you can also pick up a 2x20 stacking header and a set of right-angle 3x4 headers that should be soldered on instead. Please note! This kit does not come with Raspberry Pi, servos, or required 5V power supply...
  • Raspberry Pi 32gb Preloaded (noobs) Sd Card
    Precio:  $5,899.00

    Raspberry Pi 32gb Preloaded (noobs) Sd Card

    -Titulo Original : Raspberry Pi 32GB Preloaded (NOOBS) SD Card-Fabricante : RASPBERRY PI-Descripcion Original: Official 32GB MicroSD Card and Full-Size Adapter // Fully Qualified by the Raspberry Pi Foundation for Optimum Performance // Preloaded with the NOOBS Operating System // Works with all Raspberry Pi Models // Raspberry Pi Foundation Official 32GB MicroSD Card with Full-Size Adapter. Fully Qualified by the Raspberry Pi Foundation for Optimum Performance. Preloaded with the NOOBS Operating System. Works with all Raspberry Pi Models. SanDisk Ultra Class 10 MicroSD Card in OEM (black color) packaging...
  • Adafruit 2258 Enclosure For Raspberry Pi 2 & Pi 3 Model B
    Precio:  $3,549.00

    Adafruit 2258 Enclosure For Raspberry Pi 2 & Pi 3 Model B

    -Titulo Original : Adafruit 2258 Enclosure For Raspberry Pi 2 & Pi 3 Model B-Fabricante : Adafruit-Descripcion Original: Lid thickness: 0.2 inch // Not superior, cables, or superior camera included // Case dimensions (without lid): 3.7" x 2.5" x 1.0" // Made in China // Also compatible with the superior 1 b+. this enclosure is made of ultra-durable, super-glossy polycarbonate and is both good looking and tough enough to toss into your Backpack or toolbox. It has slim openings for all your cables, an easy-to-remove beveled slot for your Micro SD card, openings for both your superior camera and the much anticipated display. It also has a space for your gpio cable to extend out from the superior we've also added it to our Raspberry superior 2 starter bundle. The superior board snaps into the base and the lid fits nicely onto the top. If you want to break out your superior, you can use your case without the lid and easily add hats to your b+. this is a basic enclosure with a smoke base and a clear top. This case works for the Raspberry superior 2258 b+ and superior 2/superior 3 2258 b only. It does not work for the Raspberry superior 2258 a or b. It can work with the 2258 a+, but there will be a bit of empty space of course, and you'll need to snake your USB cable or connector through the front holes which may not work If the cable is bulky...
  • Set De 2 Joystick Arcade Mame Raspberry Pi / Usb Pc
    Precio:  $19,309.00

    Set De 2 Joystick Arcade Mame Raspberry Pi / Usb Pc

    -Titulo Original : Fosiya 2 Player Arcade Games Ellipse Oval Style 8 Ways Joystick + 20 x LED Chrome Arcade Buttons for Video Games Standard Controllers All Windows PC MAME Raspberry Pi (Mixed Colors Chrome Buttons)-Fabricante : Fosiya-Descripcion Original: Excellent Control USB Encoder. High Quality Ellipse Oval Style 8 way joystick. LED Buttons Good lighting effects. Perfect LED illuminated parts for 2 player Arcade MAME Jamma and other fighting game DIY Project! Made with highest quality materials! Heat resistant plastic! Environmentally friendly metal! Includes: 2 x 5Pin Arcade Joystick + 2 x USB Encoder + 20 x Chrome plated LED button (1 Player + 2 Player + 2x Coin button). Chrome LED Illuminated push buttons with build-in Blue switch inside, excellent electronic performance, long life, reliability tested to 3,000,000 cycles...
Mostrar del 1 al 24 (de 40 productos)
Páginas de Resultados:  1  2  [Siguiente >>]