Arriba

Componentes Electrónicos > Raspberry Pi

Mostrar: 
Mostrar del 1 al 24 (de 46 productos)
Páginas de Resultados:  1  2  [Siguiente >>] 
  • PiTFT Plus 480x320 3.5 TFT+Touchscreen for Raspberry Pi - Pi
    Precio:  $12,719.00

    PiTFT Plus 480x320 3.5 TFT+Touchscreen for Raspberry Pi - Pi

    -Titulo Original : PiTFT Plus 480x320 3.5 TFT+Touchscreen for Raspberry Pi - Pi 2 and Model A+ / B+-Fabricante : ADAFRUIT-Descripcion Original: This PiTFT 3.5" is designed to fit nicely onto the Raspberry Pi 2 or Model A+ / B+, not compatible with original Model A and Model B // Comes fully assembled and ready to plug into your Pi! (See not below) // You can also have an HDMI display separately connected.(This may be required during initial setup) // Features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay // Important Note: This product requires configuration and driver setup to work correctly on the PI and is not "plug and play". Many users report a "white" screen indicating the PI has not been configured correctly. Please see Adafruit Documentation or contact the seller if you experience this issue. Raspberry Pi Not included // Color: Is this not the cutest, little display for the Raspberry Pi? It features a 3.5 display with 480x320 16-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered specifically to work with the Raspberry Pi 2 and the Model A+ / B+. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top! This PiTFT 3.5 is designed to fit nicely onto the Raspberry Pi 2 or Model A+ / B+. If you'd like to use a 3.5 display with the original Pi A or Pi B, check out this version The display uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. GPIO #18 can be used to PWM dim the backlight if you like. All other GPIO are unused. There's a 2x16 'classic Pi' connection GPIO header on the bottom, you can connect a 26-pin Pi GPIO cable to it to use any of the other pins as you like. The other GPIO are broken out into solder pads at the bottom, in case you want to use more of the GPIO. Best of all, it comes fully assembled and ready to plug into your Pi! You can use this as a display for running the X interface, or pygame. You can also have an HDMI display seperately connected. There's four mounting ears that can be used to attach the display & Pi to a bezel, or snap them off with pliers (they're perforated) for a slick exactly-the-same-size-as-a-Pi look. Adafruit created a custom kernel package based of off Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. Adafruit's tutorial shows you how to install the software, as well as calibrate the touchscreen, display images such as from your PiCam and more! Please visit Adafruit for more informatio...
  • Zebra Zero Heatsink Case in Black Ice for Raspberry Pi Zero
    Precio:  $2,619.00
    Expira: 05/04/2021

    Zebra Zero Heatsink Case in Black Ice for Raspberry Pi Zero

    -Titulo Original : Zebra Zero Heatsink Case in Black Ice for Raspberry Pi Zero 1.3 and Wireless C4Labs -Fabricante : Zebra -Descripcion Original: Cable adaptador de corriente para conector D-Tap a batería simulada NP-FZ100 para cámara Sony A7III A7RIII A7SIII A9 ILCE-9 Trabaja con batería Sony y batería Anton con salida D-tap. Batería simulada NP-FZ100, adecuada para cámara Sony A7III A7RIII A7SIII A9 Entrada: 10V-20V, Salida: 7.6V / 2A. Longitud del cable: 35 cm - 110 cm El paquete incluye: 1 x cable de alimentación extensible para D-Tap a batería ficticia NP-FZ10...
  • Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30
    Precio:  $7,829.00

    Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30

    -Titulo Original : Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30-Fabricante : RASPBERRY PI-Descripcion Original: Computer accessories, Computers | Electronics, Electronics | Peripherals and spares // Color:Multicolor Link to blog - how to get started with the camera module - with sample script ...
  • Raspberry Pi 3 Starter Kit [official Raspberry]
    Precio:  $47,369.00

    Raspberry Pi 3 Starter Kit [official Raspberry]

    -Titulo Original : Raspberry Pi 3 Starter Kit [official Raspberry]-Fabricante : RASPBERRY PI-Descripcion Original: Offical & Original Raspberry Pi 3 Starter Kit // To celebrate the sale of their ten millionth Raspberry Pi, the Raspberry Pi Foundation for the first time has put together their own idea of what the perfect bundle would look like, creating the official Raspberry Pi Starter Kit. This kit provides you with a keyboard, mouse, power supply, Pi enclosure, HDMI cable, and an SD card with the necessary operating system out of which you can operate. Great for setting you on the path to building your own computer -- all you'd need to wrap it up is an HDMI monitor or television! Kit includes: A Raspberry Pi 3 Model B An 8GB NOOBS SD card An official case An official 2.5A multi-region power supply An official 1m HDMI cable An optical mouse and a keyboard (QWERTY) with high-quality scissor-switch action A copy of Adventures in Raspberry Pi Foundation Edition The Pi Foundation has called this an unashamedly premium product: the latest Raspberry Pi, official accessories, the best USB peripherals we could find, and a copy of the highest-rated Raspberry Pi book. It doesn't get any more official than that...
  • Set De 2 Joystick Arcade Mame Raspberry Pi / Usb Pc
    Precio:  $15,389.00

    Set De 2 Joystick Arcade Mame Raspberry Pi / Usb Pc

    -Titulo Original : Fosiya 2 Player Arcade Games Ellipse Oval Style 8 Ways Joystick + 20 x LED Chrome Arcade Buttons for Video Games Standard Controllers All Windows PC MAME Raspberry Pi (Mixed Colors Chrome Buttons)-Fabricante : Fosiya-Descripcion Original: Excellent Control USB Encoder. High Quality Ellipse Oval Style 8 way joystick. LED Buttons Good lighting effects. Perfect LED illuminated parts for 2 player Arcade MAME Jamma and other fighting game DIY Project! Made with highest quality materials! Heat resistant plastic! Environmentally friendly metal! Includes: 2 x 5Pin Arcade Joystick + 2 x USB Encoder + 20 x Chrome plated LED button (1 Player + 2 Player + 2x Coin button). Chrome LED Illuminated push buttons with build-in Blue switch inside, excellent electronic performance, long life, reliability tested to 3,000,000 cycles...
  • Adafruit Flex Cable for Raspberry Pi Camera - 2 meters...
    Precio:  $2,929.00

    Adafruit Flex Cable for Raspberry Pi Camera - 2 meters...

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 2 meters [ADA2144]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2144 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 2 meters long. We have cables in  a ton of sizes  so you can have the perfect fit. Each order comes with one cable,  Pi Camera  not included (but we have those in the shop as well) Please note, we did test this length cable with our Pi Model B/B+ and a Pi Camera and it worked great but 2 meters is really long for this kind of camera protocol, so if you have a very electrically noisy environment (inside a tesla coil?) you may have corrupted images...
  • RS Raspberry Pi 7-Inch LCD Touch Screen Case, White
    Precio:  $5,529.00

    RS Raspberry Pi 7-Inch LCD Touch Screen Case, White

    -Titulo Original : RS Raspberry Pi 7-Inch LCD Touch Screen Case, White-Fabricante : RASPBERRY PI-Descripcion Original: Color: Note: Raspberry Pi Board and Raspberry Pi LCD Touch Screen are sold separately. Case compatible only with the Official Raspberry Pi 7 LCD Touch Screen. This case is designed to house your Raspberry Pi board and the Official Raspberry Pi 7 LCD Touch Screen providing protection to the board and the display. The case also acts as a bezel to the display, improving its appearance while housing the board neatly behind it...
  • Raspberry Pi 16GB Preloaded (Noobs) SD Card …
    Precio:  $4,249.00

    Raspberry Pi 16GB Preloaded (Noobs) SD Card …

    -Titulo Original : Raspberry Pi 16GB Preloaded (Noobs) SD Card …-Fabricante : RASPBERRY PI-Descripcion Original: Genuine 16GB SanDisk Ultra Class 10 MicroSD Card (Red/White) with adapter // Works with all Raspberry Pi Models // Fully Qualified by the Raspberry Pi Foundation for Optimum Performance // Preloaded with the NOOBS Operating System // Raspberry Pi 16GB Preloaded (NOOBS) SD Card &hellip...
  • Set De 4 Joystick Arcade oval  Mame Raspberry Pi / Usb Pc
    Precio:  $30,739.00

    Set De 4 Joystick Arcade oval Mame Raspberry Pi / Usb Pc

    -Titulo Original : Fosiya 4 Player LED Arcade Kit Ellipse Oval Style Joystick USB Encoder To PC Games DIY Controllers Bat Joystick 4 Colors LED Arcade Buttons For All Windows PC MAME Raspberry Pi-Fabricante : Fosiya-Descripcion Original: alidad: Codificador USB de excelente control. Joystick de 8 vías de estilo elipse ovalado de alta calidad. Botones LED Buenos efectos de iluminación. ¡Piezas iluminadas con LED perfectas para 4 jugadores Arcade MAME Jamma y otro juego de lucha DIY Project Fabricado con materiales de primera calidad , Plástico resistente al calor! ¡Metal ecológico Incluye: Joystick Arcade de 4 x 5 pines + 4 x Codificador USB + Botones LED más grandes de 32 x 28 mm + Botones LED pequeños de 8 x 24 mm. Botones pulsadores iluminados por LED de 5 V con interruptor incorporado en el interior, excelente rendimiento electrónico, larga vida útil, confiabilidad probada a 3.000.000 de ciclos...
  • ContempoViews Intermediate Starter Kit para Raspberry Pi B + 2 & 3 RPi Learning Kit 1210
    Precio:  $11,249.00

    ContempoViews Intermediate Starter Kit para Raspberry Pi B + 2 & 3 RPi Learning Kit 1210

    -Titulo Original : ContempoViews Intermediate Starter Kit for Raspberry Pi B+ 2 & 3 RPi Learning Kit 1210-Fabricante : Contempo Views-Descripcion Original: Advanced learning kit intended for those with some experience with RPi or Arduino // Over 35 different components // Nearly 100pcs in total // Numerous electronic components to enhance your Raspberry Pi experience // This is an advanced learning kit for Raspberry Pi. It is equipped with more interesting and powerful functional modules than the basic starter kit, and so it is more suitable for those who have already had some relevant knowledge. This advanced version provides more abundant learning materials and more space for creating some interesting interactive projects. Raspberry Pi is a credit card sized single-board computer, through which we can learn relevant knowledge about Linux operating systems as well as C and python language based on Raspberry Pi debian (based on linux) system, not to mention sensor/module applications on Raspberry Pi. Arduino and Raspberry Pi are a great match for each other. - 10MM Full color high-brightness sensor x 1 - Home appliances control module x 1 - Raspberry Pi GPIO V2 shield x 1 - High-quality 830 hole breadboard x 1 - MAX7219 dot matrix module x 1 - 9g servo x 1 - ULN2003 driving board x 1 - Black remote control x 1 - 5V step motor x 1 - 50K adjustable potentiometer x 1 - 801S vibration sensor x 1 - PS2 game rocker module x 1 - Four-bit digital tube x 1 - One-bit digital tube x 1 - 74H595 IC x 1 - Red LED x 5 - Blue LED x 5 - Yellow LED x 5 - 1K resistor x 5 - 10K resistor x 5 - 220R resistor x 8 - DHT11 Humiture sensor x 1 - DS3231 clock x 1 - PCF8591 AD/DA conversion module x1 - Yellow button cap x 4 - Infrared receiver component x 1 - LM35 component x 1 - Flame component x 1 - Ball component x 2 - Light-sensitive component x 3 - Mini LCD screen x 1 - 40Pin colorful flat cable x 1 - Membrane keypad x 1 - Dupont Cable x 30 - Male to female dupont cable/20-row x 1 - SR04 ultrasonic x ...
  • Adafruit Smt Gpio Header For Raspberry Pi Hat - 2x20 Short.
    Precio:  $2,329.00

    Adafruit Smt Gpio Header For Raspberry Pi Hat - 2x20 Short.

    -Titulo Original : Adafruit SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header [ADA2187]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2187 // Stock Type: Raspberry Pi >> Raspberry Pi B+, Pi 2, & Pi 3 >> Prototyping // In Stock & Ready to Ship // For super-slim SMT designs, this custom-made, 2x20 short SMT female header can be used to plug a Raspberry Pi HAT onto a B+ or A+ or Pi 2. It's harder to use than the Thru-Hole type headers, but for the slickest, slimmest fit, this header is recommended...
  • Adafruit Flex Cable for Raspberry Pi Camera - 1 meter...
    Precio:  $2,589.00

    Adafruit Flex Cable for Raspberry Pi Camera - 1 meter...

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 1 meter [ADA2143]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2143 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is 1 meter long. We have cables in a ton of sizes  so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well) Please note, we did test this length cable with our Pi Model B/B+ and a Pi Camera and it worked great but 1 meter is really long for this kind of camera protocol, so if you have a very electrically noisy environment (inside a tesla coil?) you may have corrupted images...
  • Adafruit Ultimate GPS HAT for Raspberry Pi A+ or B+ Mini Kit
    Precio:  $13,389.00

    Adafruit Ultimate GPS HAT for Raspberry Pi A+ or B+ Mini Kit

    -Titulo Original : Adafruit Ultimate GPS HAT for Raspberry Pi A+ or B+ Mini Kit-Fabricante : ADAFRUIT-Descripcion Original: 165 dBm sensitivity, 10 Hz updates, 66 channels // Built in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off! // Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky view // Fix status LED blinks to let you know when the GPS has determined the current coordinates // Raspberry Pi *not* included // This new HAT from Adafruit adds their celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+ or B+ We spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more. Please note, this HAT takes over the Raspberry Pi's hardware UART to send/receive data to and from the GPS module. So, if you need to use the RX/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi. Read up on Adafruit's tutorial for more information on how to use this fine HAT. Comes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder. This HAT does not come with a 12mm coin battery! A CR1220 will let you use the real-time-clock capability of the GPS HAT...
  • Raspberry Pi Zero W (Wireless) ( 2017 model)
    Precio:  $6,299.00

    Raspberry Pi Zero W (Wireless) ( 2017 model)

    -Titulo Original : Raspberry Pi Zero W (Wireless) ( 2017 model)-Fabricante : RASPBERRY PI-Descripcion Original: Raspberry Pi Zero W // SoC: Broadcom BCM2835--CPU: ARM11 running at 1GHz--RAM: 512MB // Wireless: 2.4GHz 802.11n wireless LAN (WiFi) // Bluetooth: Bluetooth Classic 4.1 and Bluetooth LE // Dimensions: 65mm × 30mm × 5mm // Dimensions: 65mm × 30mm × 5mm SoC: Broadcom BCM2835 CPU: ARM11 running at 1GHz RAM: 512MB Wireless: 2.4GHz 802.11n wireless LAN Bluetooth: Bluetooth Classic 4.1 and Bluetooth LE Power: 5V, supplied via micro USB connector Video & Audio: 1080P HD video & stereo audio via mini-HDMI connector Storage: MicroSD card Output: Micro USB GPIO: 40-pin GPIO, unpopulated Pins: Run mode, unpopulated; RCA composite, unpopulated Camera Serial Interface (CSI...
  • Joystick Para Pc Xbox 360 Ps2 Juegos Ps3 Arcade (0h1t)
    Precio:  $3,839.00

    Joystick Para Pc Xbox 360 Ps2 Juegos Ps3 Arcade (0h1t)

    -Titulo Original : EG STARTS Red Arcade Classic Competition 5 Pin Stick 5P Rocker 4 - 8 Ways Joystick for PC Xbox 360 PS2 PS3 Games Arcade DIY Kit Parts Mame Jamma Machine Gaming-Fabricante : EG STARTS-Descripcion Original: Nuevo diseño de interfaz. Corrija la conexión incorrecta. Posicionamiento preciso y de alta calidad. Fácil de quitar la parte superior de la bola (rojo). Incluye: Red Ball Top + 5Pin Cable + Ontología independiente. Fácil de cambiar el modo de 4 vías y 8 vías (el valor predeterminado es cuadrado de 8 vías...
  • Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2...
    Precio:  $14,349.00

    Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2...

    -Titulo Original : Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2 [ADA2324]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2324 // Stock Type: Raspberry Pi >> Pi HATs & Plates >> Hats // In Stock & Ready to Ship // It's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+, B+, or Pi 2. Does not work with the Pi 3 at this time Here's the low-down on the GPS module:-165 dBm sensitivity, 10 Hz updates, 66 channelsOnly 20mA current drawBuilt in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off!PPS output on fix, by default connected to pin #4Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky viewFix status LED blinks to let you know when the GPS has determined the current coordinatesWe spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more. Please note, this HAT takes over the Raspberry Pi's hardware UART to send/receive data to and from the GPS module . So, if you need to use the RX/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi. Read up on our tutorial for more information on how to use this fine HAT Comes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder.  You can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top  or a  slim ultra-low-profile header...
  • Element14 Raspberry Pi 3 B+ Motherboard
    Precio:  $10,139.00

    Element14 Raspberry Pi 3 B+ Motherboard

    -Titulo Original : Element14 Raspberry Pi 3 B+ Motherboard-Fabricante : ELEMENT-Descripcion Original: 1.4GHz 64-bit quad-core ARMv8 CPU, 1 GB RAM // 802.11n Wireless LAN, 10/100Mbps Lan Speed // Bluetooth 4.2, Bluetooth Low Energy // 4 USB ports, 40 GPIO pins, Full HDMI port, Combined 3.5mm audio jack and composite video // Camera interface (CSI),Display interface (DSI), Micro SD card slot (now push-pull rather than push-push), VideoCore IV 3D graphics core // New Original Raspberry Pi 3 Model B+ Built-in Broadcom 1.4GHz quad-core 64 bit processor with Low Energy On-Board Wifi Bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity. To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2.5A adapter is required. Technical Specifications: - Broadcom BCM2837BO 64 bit ARMv8 QUAD Core A53 64bit Processor powered Single Board Computer run at 1.4GHz - 1GB RAM - BCM43143 WiFi on board - Bluetooth Low Energy (BLE) on board - 40 pin extended GPIO - 4 x USB2 ports - 4 pole Stereo output and Composite video port - Full size HDMI - CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - MicroSD port for loading your operating system and storing data - Upgraded switched Micro USB power source (now supports up to 2.5 Amps. Package Contents : - 1x Raspberry Pi 3 Model B...
  • Cable Flexible Flat 30 Pins 0.5mm Pitch 300mm (tipo A)
    Precio:  $2,469.00

    Cable Flexible Flat 30 Pins 0.5mm Pitch 300mm (tipo A)

    -Titulo Original : uxcell Flexible Flat Cable, 30 Pins 0.5mm Pitch 300mm FPC FFC Flexible Ribbon Cable for LCD TV Car Audio DVD Player Laptop (A Type) -Fabricante : uxcell -Descripcion Original: Reemplazo para el siguiente modelo de batería / números de pieza: CP-HK03. Destinado / Compatible con los siguientes modelos de altavoces Bluetooth: Harman Kardon Esquire 2, HKESQUIRE2BLK, HKESQUIRE2GLD, HKESQUIRE2GR. Paquete de baterías recargables de polímero de litio de 3.7V 2800mAh 10.36Wh...
  • Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB.
    Precio:  $11,159.00

    Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB.

    -Titulo Original : Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB RAM, Linux)-Fabricante : RASPBERRY PI-Descripcion Original: Quad-core ARM Cortex-A7 CPU 0.9 GHz // 1GB SDRAM // Audio: 3.5 mm jack, Storage: microSD card slot, Network: 10/100 Mb/s // Power: Micro USB DC 5 V 800 mA for the Pi board // Style: The latest addition to the Raspberry Pi family, the Raspberry Pi 2 Model B takes the platform to a completely new level. Combining a six fold increase in processing power and a doubling of memory capacity with complete backward compatibility with the existing Model B Plus, Raspberry Pi 2 Model B is the perfect board for professionals and hobbyists alike. The new Raspberry Pi 2 Model B is jam packed with features. With a new quad core processor and twice the memory with a massive 1GB RAM. It's a whopping 6x faster than its predecessor. The ultra-low-cost, deck-of-cards sized Linux computer has had a makeover, and it's a good one at that. Required items to get up and running are: MicroSD card, Power Supply, Keyboard, Mouse, and HDMI compatible display. Note: The Raspberry Pi 2 boards by element14/Premier Farnell are Made in China (PRC) as well as United Kingdom...
  • Raspberry Pi 3 Model B Motherboard
    Precio:  $10,139.00

    Raspberry Pi 3 Model B Motherboard

    -Titulo Original : Raspberry Pi 3 Model B Motherboard-Fabricante : RASPBERRY PI-Descripcion Original: ✔ Modular Design: Modular designed Half cage for Fujifilm X-T3 and X-T2 Camera with battery grip // ✔ Dovetail Plate for Arca-Type: Compatible dovetail plate for Arca-Type with center marks on both axis // ✔ 2 Using Ways: The top plate can be removed, and the top plate and half cage can be used separately // ✔ Built-in Slot: Features a slot on the bottom allows to extend camera for tethering or cable release // ✔ Built-in Flat Screw Driver: Built-in flat screw driver on the bottom for quick adjustment // Color: A professional company specializing in camera accessories. A comprehensive enterprise integrating product design, research and development, sales and maintenance of camera accessories. Products are sold in the United States, China, Germany, France, Japan, Canada, Australia and other countries. We take high-quality products as the core and excellent customer service as our tenet.is a modular designed half cage with anti-twist flanges to keep the camera from twisting and provide multiple mounting points. Optional top plate is locked via a M4 screw and a shoe lock to prevent twisting.The top plate can be removed.The top plate and the half cage can be used separately.✔ The top plate comes with an arri 3/8”hole and integrate with a cold shoe for more accessories attachment if needed.✔ It features multiple 1/4-20 threaded holes on the side and bottom for accessory attachment, such as cold shoe 1593 for microphone.✔ Design for Fujifilm X-T3 with VG-XT3 Vertical Battery Grip✔ Design for Fujifilm X-T2 with VPB-XT2 Vertical Battery Grip✔ Product Dimensions: 108X 64X155mm✔ Package Dimensions: 143 x 100 x55mm✔ Net Weight: 190g✔ Package Weight: 235g✔ Material(s): Aluminum Alloy✔ 1 x Bottom Plate✔ 1 x Side Plate✔ 1 x Top Plate✔ 3 x M4 Screw✔ 1x Hex SpannerAt SMALLRIG, not only we offer high quality products,we back them up with 18-month warranty and a 30-day money back guarant...
  • Mini Aluminum Heat Sink for Raspberry Pi - 13 x 13 x 3mm
    Precio:  $1,499.00

    Mini Aluminum Heat Sink for Raspberry Pi - 13 x 13 x 3mm

    -Titulo Original : Mini Aluminum Heat Sink for Raspberry Pi - 13 x 13 x 3mm-Fabricante : ADAFRUIT-Descripcion Original: This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi but is best paired with a Raspberry Pi 3 since it can run a little hot. // Looking for an ultra-thin heat sink for your Raspberry Pi 3? Check out this nice and slim 13x13x3mm Heat Sink! This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi but is best paired with a Raspberry Pi 3 since it can run a little hot. It comes with thermal adhesive already applied to the back making installation super easy. Clean the surface of the chip of any dust or grease then peel off the protective film and press the heat sink firmly onto the chip. You can use this heatsink with any of our injection molded Adafruit Pi Enclosures, but it may not work with other enclosures and some HATs may not fit on top with the heat sink installed. We don't have formal specs for this heat sink, but when we ran 'stress -c 4' on the Pi 3 to run all 4 CPUs, a heat-sink-less Pi quickly dropped down to 0.96 GHz to maintain thermal equilibrium. With this heat sink installed, it could run at 1.02 GHz (so, 6% higher performance). It's a very minimal heatsink! Note that you do not need a heatsink for the Pi 3, it will automatically adjust its speed to avoid overheating! It can also, of course, be used for other processors and chips...
  • Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
    Precio:  $5,789.00

    Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit

    -Titulo Original : Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit-Fabricante : ADAFRUIT-Descripcion Original: 4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC // Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) // Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping. // Big terminal block connectors to easily hook up wires (18-26AWG) and power // Works best with Raspberry Pi model A+, B+, or Pi 2, but can be used with a model A or B if you purchase a 2x13 extra-tall header and solder that instead of the 2x20 // Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins. In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include. Motors are controlled by TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time), a big improvement over L293D drivers and there are built-in flyback diodes as well. We even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit so all you have to do is solder on the included 2x20 plain header and the terminal blocks. Install the easy-to-use Python library, check out the examples and you're ready to go! Comes with an assembled & tested HAT, terminal blocks, and 2x20 plain header. Some soldering is required to assemble the headers o...
  • Raspberry Pi 7 Touchscreen Display
    Precio:  $22,169.00

    Raspberry Pi 7 Touchscreen Display

    -Titulo Original : Raspberry Pi 7 Touchscreen Display-Fabricante : RASPBERRY PI-Descripcion Original: Brand New in box. The product ships with all relevant accessories // Brand New in box. The product ships with all relevant accessorie...
  • Raspberry Pi 32gb Preloaded (noobs) Sd Card
    Precio:  $5,009.00

    Raspberry Pi 32gb Preloaded (noobs) Sd Card

    -Titulo Original : Raspberry Pi 32GB Preloaded (NOOBS) SD Card-Fabricante : RASPBERRY PI-Descripcion Original: Official 32GB MicroSD Card and Full-Size Adapter // Fully Qualified by the Raspberry Pi Foundation for Optimum Performance // Preloaded with the NOOBS Operating System // Works with all Raspberry Pi Models // Raspberry Pi Foundation Official 32GB MicroSD Card with Full-Size Adapter. Fully Qualified by the Raspberry Pi Foundation for Optimum Performance. Preloaded with the NOOBS Operating System. Works with all Raspberry Pi Models. SanDisk Ultra Class 10 MicroSD Card in OEM (black color) packaging...
Mostrar del 1 al 24 (de 46 productos)
Páginas de Resultados:  1  2  [Siguiente >>]