Arriba

Componentes Electrónicos > Raspberry Pi

Mostrar: 
Mostrar del 1 al 24 (de 45 productos)
Páginas de Resultados:  1  2  [Siguiente >>] 
  • Adafruit Flex Cable for Raspberry Pi Camera - 1 meter...
    Precio:  $1,999.00

    Adafruit Flex Cable for Raspberry Pi Camera - 1 meter...

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 1 meter [ADA2143]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2143 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is 1 meter long. We have cables in a ton of sizes  so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well) Please note, we did test this length cable with our Pi Model B/B+ and a Pi Camera and it worked great but 1 meter is really long for this kind of camera protocol, so if you have a very electrically noisy environment (inside a tesla coil?) you may have corrupted images...
  • Raspberry Pi Foundation Case For Model B+ & Raspberry Pi 2.
    Precio:  $3,209.00

    Raspberry Pi Foundation Case For Model B+ & Raspberry Pi 2.

    -Titulo Original : Raspberry Pi Foundation Case For Model B+ & Raspberry Pi 2 Model B Case For Raspberry Pi 3 Model B/B+-Fabricante : RASPBERRY PI-Descripcion Original: Official case for the Raspberry Pi from the Raspberry Pi Foundation // Removable Lid provides easy access to the camera and display ports // Removable Side Panels with easy access to the GPIO port // Removable Top Frame // Designed with Pi HAT's in mind // Official case for the Raspberry Pi from the Raspberry Pi Foundation 5 part enclosure Removable Lid for easy access to the camera and display ports Removable Top Frame Removable Side Panels with easy access to the GPIO port Designed with Pi HAT's in mind Dimensions: 96mm x 70mm x 25mm Compatible with the Raspberry Pi 2 Model B and Raspberry Pi Model B+ Note: Model A+ Boards will fit in this case however the USB port is recessed inside the case...
  • Raspberry Pi Zero W (Wireless) ( 2017 model)
    Precio:  $4,409.00

    Raspberry Pi Zero W (Wireless) ( 2017 model)

    -Titulo Original : Raspberry Pi Zero W (Wireless) ( 2017 model)-Fabricante : RASPBERRY PI-Descripcion Original: Raspberry Pi Zero W // SoC: Broadcom BCM2835--CPU: ARM11 running at 1GHz--RAM: 512MB // Wireless: 2.4GHz 802.11n wireless LAN (WiFi) // Bluetooth: Bluetooth Classic 4.1 and Bluetooth LE // Dimensions: 65mm × 30mm × 5mm // Dimensions: 65mm × 30mm × 5mm SoC: Broadcom BCM2835 CPU: ARM11 running at 1GHz RAM: 512MB Wireless: 2.4GHz 802.11n wireless LAN Bluetooth: Bluetooth Classic 4.1 and Bluetooth LE Power: 5V, supplied via micro USB connector Video & Audio: 1080P HD video & stereo audio via mini-HDMI connector Storage: MicroSD card Output: Micro USB GPIO: 40-pin GPIO, unpopulated Pins: Run mode, unpopulated; RCA composite, unpopulated Camera Serial Interface (CSI...
  • Game Hat Para Raspberry Pi A+/b+/2b/3b/3b+ 3.5 Ips 480x320
    Precio:  $14,299.00

    Game Hat Para Raspberry Pi A+/b+/2b/3b/3b+ 3.5 Ips 480x320

    -Titulo Original : Waveshare Game HAT for Raspberry Pi A+/B+/2B/3B/3B+ 3.5inch IPS Screen 480x320 Resolution 60 Frame Experience Make Your Own Game Console-Fabricante : Waveshare-Descripcion Original: Este GAME HAT convertirá tu Raspberry Pi en una consola de juegos clásica en un segundo, te recuerda todos los placeres de los juegos en la memoria. Pantalla IPS de 3.5 pulgadas, resolución 480 × 320, experiencia de 60 cuadros, visualización fluida, no más pérdida de cuadros Compatible con Raspberry Pi A + / B + / 2B / 3B / 3B + (Raspberry Pi Zero / Zero W / Zero WH requiere otro cable HDMI) Integra el circuito de carga de la batería, alimentado por una batería de litio 18650 (NO incluida), se reproduce en cualquier lugar en cualquier momento Indicador de capacidad de la batería Altavoz a bordo y conector para auriculares, escuche el BGM familiar de los viejos tiempo...
  • RASPBERRY - Box for Raspberry Pi RASPBERRY 10874
    Precio:  $4,169.00

    RASPBERRY - Box for Raspberry Pi RASPBERRY 10874

    -Titulo Original : RASPBERRY - Box for Raspberry Pi RASPBERRY 10874-Fabricante : RASPBERRY PI-Descripcion Original: Material: Plastic // Color: White/Red // Quantity: Single Pack // Made for Raspberry Pi 3 // Beautifully crafted, this red and white snap-together case is designed to protect your Raspberry Pi Model B. This 5-part enclosure has removable side panels to enable access to the GPIO...
  • Raspberry Pi Zero V1.3 Development Board - Camera Ready
    Precio:  $3,649.00

    Raspberry Pi Zero V1.3 Development Board - Camera Ready

    -Titulo Original : Raspberry Pi Zero v1.3 Development Board - Camera Ready-Fabricante : RASPBERRY PI-Descripcion Original: Unbelievably the super-small and super-affordable VERSION 1.3 WITH CAMERA ADAPTER! Raspberry Pi just got even smaller and even cheaper! Pi Zero is the heart of a Raspberry Pi on a tiny 65mm x 30mm board. With mini-HDMI, micro-B OTG USB, and the same 40-pin GPIO it has great connectivity. Pi Zero Features: BCM 2835 SOC @ 1GHz 1GHz 512MB of RAM micro-SD mini-HDMI micro-B USB for data micro-B USB for power Unpopulated 40-pin GPIO connector Compatible with existing HAT addons Dimensions: 65mm x 30mm x 5m...
  • Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB.
    Precio:  $9,439.00

    Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB.

    -Titulo Original : Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB RAM, Linux)-Fabricante : RASPBERRY PI-Descripcion Original: Quad-core ARM Cortex-A7 CPU 0.9 GHz // 1GB SDRAM // Audio: 3.5 mm jack, Storage: microSD card slot, Network: 10/100 Mb/s // Power: Micro USB DC 5 V 800 mA for the Pi board // Style: The latest addition to the Raspberry Pi family, the Raspberry Pi 2 Model B takes the platform to a completely new level. Combining a six fold increase in processing power and a doubling of memory capacity with complete backward compatibility with the existing Model B Plus, Raspberry Pi 2 Model B is the perfect board for professionals and hobbyists alike. The new Raspberry Pi 2 Model B is jam packed with features. With a new quad core processor and twice the memory with a massive 1GB RAM. It's a whopping 6x faster than its predecessor. The ultra-low-cost, deck-of-cards sized Linux computer has had a makeover, and it's a good one at that. Required items to get up and running are: MicroSD card, Power Supply, Keyboard, Mouse, and HDMI compatible display. Note: The Raspberry Pi 2 boards by element14/Premier Farnell are Made in China (PRC) as well as United Kingdom...
  • 2 Player Controller USB  Joystick MAME Raspberry Pi 1/2/3
    Precio:  $5,149.00

    2 Player Controller USB Joystick MAME Raspberry Pi 1/2/3

    -Titulo Original : Easyget 2 Player Zero Delay Generic Game Controller Usb To Joystick For Mame & Raspberry Pi 1/2/3 Retropie Diy Projects Support For Sanwa Parts-Fabricante : Easyget-Descripcion Original: Fan Included No Memory Series VENGEANCE RGB PRO Memory Type DDR4 Memory Size 128GB Kit (4 x 32GB) Tested Latency 16-20-20-38 Tested Voltage 1.35V Tested Speed 3200MHz Memory Color BLACK LED Lighting RGB Single Zone / Multi-Zone Lighting Individually Addressable SPD Latency 15-15-15-36 SPD Speed 2133MHz SPD Voltage 1.2V Speed Rating PC4-25600 (3200MHz) Compatibility Intel Z390,Intel X299 Heat Spreader Anodized Aluminum Package Memory Format DIMM Performance Profile XMP 2.0 Package Memory Pin 28...
  • ContempoViews Intermediate Starter Kit para Raspberry Pi B + 2 & 3 RPi Learning Kit 1210
    Precio:  $5,479.00

    ContempoViews Intermediate Starter Kit para Raspberry Pi B + 2 & 3 RPi Learning Kit 1210

    -Titulo Original : ContempoViews Intermediate Starter Kit for Raspberry Pi B+ 2 & 3 RPi Learning Kit 1210-Fabricante : Contempo Views-Descripcion Original: Advanced learning kit intended for those with some experience with RPi or Arduino // Over 35 different components // Nearly 100pcs in total // Numerous electronic components to enhance your Raspberry Pi experience // This is an advanced learning kit for Raspberry Pi. It is equipped with more interesting and powerful functional modules than the basic starter kit, and so it is more suitable for those who have already had some relevant knowledge. This advanced version provides more abundant learning materials and more space for creating some interesting interactive projects. Raspberry Pi is a credit card sized single-board computer, through which we can learn relevant knowledge about Linux operating systems as well as C and python language based on Raspberry Pi debian (based on linux) system, not to mention sensor/module applications on Raspberry Pi. Arduino and Raspberry Pi are a great match for each other. - 10MM Full color high-brightness sensor x 1 - Home appliances control module x 1 - Raspberry Pi GPIO V2 shield x 1 - High-quality 830 hole breadboard x 1 - MAX7219 dot matrix module x 1 - 9g servo x 1 - ULN2003 driving board x 1 - Black remote control x 1 - 5V step motor x 1 - 50K adjustable potentiometer x 1 - 801S vibration sensor x 1 - PS2 game rocker module x 1 - Four-bit digital tube x 1 - One-bit digital tube x 1 - 74H595 IC x 1 - Red LED x 5 - Blue LED x 5 - Yellow LED x 5 - 1K resistor x 5 - 10K resistor x 5 - 220R resistor x 8 - DHT11 Humiture sensor x 1 - DS3231 clock x 1 - PCF8591 AD/DA conversion module x1 - Yellow button cap x 4 - Infrared receiver component x 1 - LM35 component x 1 - Flame component x 1 - Ball component x 2 - Light-sensitive component x 3 - Mini LCD screen x 1 - 40Pin colorful flat cable x 1 - Membrane keypad x 1 - Dupont Cable x 30 - Male to female dupont cable/20-row x 1 - SR04 ultrasonic x ...
  • Adafruit Raspberry Pi B+ Case - Smoke Base w/ Clear Top
    Precio:  $1,669.00

    Adafruit Raspberry Pi B+ Case - Smoke Base w/ Clear Top

    -Titulo Original : Adafruit Raspberry Pi B+ Case - Smoke Base w/ Clear Top-Fabricante : ADAFRUIT-Descripcion Original: The Pi snaps into the base and the lid fits snugly onto the top. If you want to break out your Pi you can use your case without the lid and add hats to your B+ with ease. // This case works for the Raspberry Pi Model B+ only. // It does work with the model A+ but there will be a bit of empty space of course, and you'll need to snake your USB cable or connector through the front holes which may not work if the cable is bulky // It does not work for the Raspberry Pi Model A or B. // No Pi, cables, or Pi Camera included. This product is just the case! // This enclosure was designed by Mike Doell - just like our elegant, beautiful, and functional Pi Case for Raspberry Pi Model B. Made of ultra-durable, super-glossy polycarbonate, it is both good looking and tough enough to toss into your bookbag or toolbox. It has slim openings for all your cables, an easy-to-remove beveled slot for your Micro SD card, slots for both your Pi Camera and upcoming Display, and a space for your GPIO cable to extend out from the Pi. The Pi snaps into the base and the lid fits snugly onto the top. If you want to break out your Pi you can use your case without the lid and add hats to your B+ with ease. This is the basic, classic enclosure with a smoke base and a clear top. More colors are coming soon and we'll have packs to mix and match for ultimate Raspberry Pi B+ enclosure fun, but we'll be starting out with this very neutral gray/clear combo. This case works for the Raspberry Pi Model B+ only. It does not work for the Raspberry Pi Model A or B. It does work with the model A+ but there will be a bit of empty space of course, and you'll need to snake your USB cable or connector through the front holes which may not work if the cable is bulky No Pi, cables, or Pi Camera included. This product is just the case...
  • Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
    Precio:  $5,489.00

    Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit

    -Titulo Original : Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit-Fabricante : ADAFRUIT-Descripcion Original: 4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC // Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) // Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping. // Big terminal block connectors to easily hook up wires (18-26AWG) and power // Works best with Raspberry Pi model A+, B+, or Pi 2, but can be used with a model A or B if you purchase a 2x13 extra-tall header and solder that instead of the 2x20 // Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins. In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include. Motors are controlled by TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time), a big improvement over L293D drivers and there are built-in flyback diodes as well. We even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit so all you have to do is solder on the included 2x20 plain header and the terminal blocks. Install the easy-to-use Python library, check out the examples and you're ready to go! Comes with an assembled & tested HAT, terminal blocks, and 2x20 plain header. Some soldering is required to assemble the headers o...
  • Adafruit Flex Cable for Raspberry Pi Camera - 24 / 610mm
    Precio:  $3,199.00

    Adafruit Flex Cable for Raspberry Pi Camera - 24 / 610mm

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 24 / 610mm-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1731 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 24 / 610mm long We have cables in 2, 4, 8, 12, and 18 long so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well)...
  • Raspberry Pi 32gb Preloaded (noobs) Sd Card
    Precio:  $4,299.00

    Raspberry Pi 32gb Preloaded (noobs) Sd Card

    -Titulo Original : Raspberry Pi 32GB Preloaded (NOOBS) SD Card-Fabricante : RASPBERRY PI-Descripcion Original: Official 32GB MicroSD Card and Full-Size Adapter // Fully Qualified by the Raspberry Pi Foundation for Optimum Performance // Preloaded with the NOOBS Operating System // Works with all Raspberry Pi Models // Raspberry Pi Foundation Official 32GB MicroSD Card with Full-Size Adapter. Fully Qualified by the Raspberry Pi Foundation for Optimum Performance. Preloaded with the NOOBS Operating System. Works with all Raspberry Pi Models. SanDisk Ultra Class 10 MicroSD Card in OEM (black color) packaging...
  • Set De 4 Joystick Arcade Mame Raspberry Pi / Usb Pc
    Precio:  $26,549.00

    Set De 4 Joystick Arcade Mame Raspberry Pi / Usb Pc

    -Titulo Original : 4 Player LED Arcade DIY Kit for USB MAME PC Game DIY & Raspberry Pi Retro Controller DIY Including 4X Arcade Joystick, 40x LED Chrome Arcade Buttons 2X Zero Delay USB Encoder-Fabricante : EG STARTS-Descripcion Original: Este es un juego de piezas de bricolaje LED para proyectos de bricolaje para 2 jugadores. ¡El codificador admite todos los sistemas de Windows! Todas las partes no son originales de Sanwa. Recién hecho en piezas de China, todos los botones no son de metal. Si el LED no se enciende. Luego, cambie la interfaz del LED de ubicación. ¡Cada codificador tiene su propio cable USB para asegurarse de que el modo multijugador puede jugar en las mismas condiciones! ¡El Joystick es un joystick profesional de 8 vías! Los botones son botones LED de 5V iluminados con microinterruptores incorporados en el interior. Los botones predeterminados están iluminados todo el tiempo. Si compra uno de este artículo, ¿Qué incluirá en el paquete? Codificador USB 4x Zero Delay LED 4x cable USB 4x cables de 5 pines para Joystick 40x cables de 3 pines para botones LED Joystick 4x 5 pines de 8 vías (1x rojo, 1x amarillo, 1x azul, 1x verde) 1x 1 jugador más grande 5V LED cromo pulsadores (blanco) con lámpara LED y micro interruptor 1x 2 jugadores más grandes 5V LED botones de cromo (blanco) con lámpara LED y micro interruptor 1x 3 jugadores más grandes botones de cromo LED de 5V (blanco) con lámpara LED y micro interruptor 1x 4 jugadores más grandes 5V LED botones de cromo (blanco) con lámpara LED y micro interruptor 4x Coin Botones de cromo LED de 5V más grandes (blanco) con lámpara LED y micro interruptor 32x botones LED cromados de 5V más grandes con LED y micro interruptor (8x rojo, 8x amarillo, 8x azul, 8x verde) 1x instrucciones Consejos para la instalación. 1. Por favor lea nuestro manual de usuario antes de comenzar sus acciones de bricolaje. 2. ¡Es muy importante! Conecte el cable de 5 pines del Joystick a la ranura de 5 pines que se encuentra frente al terminal USB-B. Mucha gente conecta el joystick a la ranura incorrecta de 5 pines. 3. No es necesario separar las funciones del botón cuando conectas el cable a los botones y al panel de codificador, excepto que deseas agregar las funciones Auto-Fire, Tubro, Clear y Mode. Todas las funciones del botón de lucha pueden ser establecido en MAME o RetroPie. Las funciones Auto-Fire, Tubro, Clear y Mode tienen su propia ranura en la placa del codificador. 4. Para jugadores profesionales. Sugerimos que cambie todos los botones y joysticks a SANWA Brand o SEIMITSU Brand. Consejos para nuevos usuarios: 1. El artículo necesita trabajar con el emulador MAME. Entonces, antes de construir su propio proyecto, descargue uno para trabajar con las piezas. 2. Si usa este kit para construir sus propios proyectos de frambuesa Pi Retropie. Busque los pasos antes de su bricolaje...
  • Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2...
    Precio:  $12,989.00

    Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2...

    -Titulo Original : Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2 [ADA2324]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2324 // Stock Type: Raspberry Pi >> Pi HATs & Plates >> Hats // In Stock & Ready to Ship // It's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+, B+, or Pi 2. Does not work with the Pi 3 at this time Here's the low-down on the GPS module:-165 dBm sensitivity, 10 Hz updates, 66 channelsOnly 20mA current drawBuilt in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off!PPS output on fix, by default connected to pin #4Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky viewFix status LED blinks to let you know when the GPS has determined the current coordinatesWe spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more. Please note, this HAT takes over the Raspberry Pi's hardware UART to send/receive data to and from the GPS module . So, if you need to use the RX/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi. Read up on our tutorial for more information on how to use this fine HAT Comes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder.  You can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top  or a  slim ultra-low-profile header...
  • Adafruit DPI TFT Kippah for Raspberry Pi [ADA2454]
    Precio:  $2,549.00

    Adafruit DPI TFT Kippah for Raspberry Pi [ADA2454]

    -Titulo Original : Adafruit DPI TFT Kippah for Raspberry Pi [ADA2454]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2454 // Stock Type: Raspberry Pi >> Pi HATs & Plates >> Plates // In Stock & Ready to Ship // A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit ! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what  normally  would go out the HDMI port come up on a nice little flat screen. * Its not technically a HAT due to the lack of an on-board EEPROM, but its the same shape as a Pi HAT and its a covering of sorts, so we call it a kippah This is the Kippah with no touchscreen support . We have a version with touchscreen capabilities if that's your thing! Compared to our lovely HDMI backpacks, you don't have the extra cost or expense of an HDMI encoder/decoder. And you get a nice ultra-fast 18-bit color display with optional touch support. We tested it and it works great with our 5 and 7 displays at 800x480. This display is 'native' so it gets all the graphics accelleration capabilities, instant refresh, etc. you would get from an HDMI displayOK so, exciting right? But, what's the catch? The catch is  this add on board uses nearly every pin available on the Raspberry Pi and those pins are hardcoded, they cannot be moved or rearranged . The pins used are GPIO 2 through 21 inclusive. That means you don't get the UART RX/TX pins (no console cable) and you don't get the standard user I2C pins, the EEPROM I2C pins, or hardware SPI pins. You do get to use pins #22, #23, #24, #25, #26 and #27, and the USB ports are fine to use too. The other catch is that this display replaces the HDMI/NTSC output , so you can't have the DPI HAT and HDMI working at once, nor can you 'flip' between the two. Also, there's no PWM's available so you can't have precision backlight control unless you somehow rig up an external PWM generator with a 555 or something. Finally, we did test this setup with ...
  • Raspberry Pi 3 Model B+ Board (3b+)
    Precio:  $10,479.00

    Raspberry Pi 3 Model B+ Board (3b+)

    -Titulo Original : Raspberry Pi 3 Model B Board (3B)-Fabricante : Raspberry Pi-Descripcion Original: MARCADOR DE PUNTAS DOBLES: puntas gemelas amplias y finas para resaltar, dibujar y subrayar con precisión. Los marcadores finos se pueden usar para escribir y enganchar líneas, mientras que los marcadores gruesos son adecuados para dibujar y colorear. 88 COLORES VIBRANTES: los marcadores a base de agua tienen colores brillantes y buena transparencia. El marcador nunca se desvanecerá con el tiempo. Cada color es atractivo, lo que puede agregarle un toque de creatividad y diversión. 88 colores vivos pueden satisfacer todas sus necesidades. REGALO PERFECTO: el juego de rotuladores está equipado con un hermoso estuche negro que es fácil de transportar, viajar y almacenar. También es un regalo de Navidad ideal para niños, adolescentes, adultos, estudiantes, maestros, etc. USOS ILIMITADOS: los marcadores a menudo se usan para pintar en papel de cartulina más apretado o papel recubierto. Además, se puede utilizar en expresiones de arquitectura, interiorismo, diseño industrial y diseño de productos pintados a mano. SEGURO Y NO TÓXICO: 100% seguro para niños a partir de 3 años. Cada marcador no es tóxico. Los marcadores de alcohol de color Vigorfun 88 son permanentes y coloridos con puntas de doble cara. Los rotuladores son atractivos, los colores son brillantes y nunca se desvanecen. Los marcadores se pueden utilizar ampliamente, como papel para tarjetas, papel recubierto, diseño industrial, diseño de productos, etc. No solo pueden dibujar y colorear, sino también resaltar, dibujar y subrayar. Además, son seguros y no tóxicos, un gran regalo para niños, adolescentes y adultos. Caracteristicas Puntas de cincel ancho y punta fina Forma cuadrada del barril Fluido suave Cada marcador tiene su nombre y número de color El juego viene con una tarjeta de color. Todo viene en una hermosa bolsa negra con soporte Especificaciones 1.Marca: Vigorfun 2.Tamaño de los marcadores: 6.9 x 5.5 x 6.7 pulgadas (17.5 x 14 x 17 cm) 3.Marcadores de peso: 3,4 libras (1,56 kg) 4.Color: 88 colores. 5.Paquete: bolsa negra con soporte 6.Ingredientes: 64% de etanol anhidro, 18% de resina, 10% de disolvente negro, 8% de propilenglicol monometiléter 7.Usos: papel, tela, zapatos, artesanías, paredes, vidrio, piedra, madera, etc. CONSEJOS 1. Retirar la tapa no más de una hora. 2. Se recomienda cubrir la tapa inmediatamente después del uso: los marcadores no estarán secos; el color no se mezclará; larga vida útil 3. Si el marcador está seco, cubra la tapa y espere más de diez minutos...
  • Raspberry Pi 3 Case - Black/Grey
    Precio:  $2,779.00

    Raspberry Pi 3 Case - Black/Grey

    -Titulo Original : Raspberry Pi 3 Case - Black/Grey-Fabricante : RASPBERRY PI-Descripcion Original: Official case for the Raspberry Pi from the Raspberry Pi Foundation // Removable Lid provides easy access to the camera and display ports // Removable Side Panels with easy access to the GPIO port // Removable Top Frame // Designed with Pi HAT's in mind // The Official Case of the Raspberry Pi Foundation has been refreshed for the Pi 3. Designed with HATs in mind and featuring multiple removable panels. Enclose your board as much or as little as necessary to best suit your latest project...
  • Raspberry Pi 3 Model B Motherboard
    Precio:  $8,699.00

    Raspberry Pi 3 Model B Motherboard

    -Titulo Original : Raspberry Pi 3 Model B Motherboard-Fabricante : RASPBERRY PI-Descripcion Original: ✔ Modular Design: Modular designed Half cage for Fujifilm X-T3 and X-T2 Camera with battery grip // ✔ Dovetail Plate for Arca-Type: Compatible dovetail plate for Arca-Type with center marks on both axis // ✔ 2 Using Ways: The top plate can be removed, and the top plate and half cage can be used separately // ✔ Built-in Slot: Features a slot on the bottom allows to extend camera for tethering or cable release // ✔ Built-in Flat Screw Driver: Built-in flat screw driver on the bottom for quick adjustment // Color: A professional company specializing in camera accessories. A comprehensive enterprise integrating product design, research and development, sales and maintenance of camera accessories. Products are sold in the United States, China, Germany, France, Japan, Canada, Australia and other countries. We take high-quality products as the core and excellent customer service as our tenet.is a modular designed half cage with anti-twist flanges to keep the camera from twisting and provide multiple mounting points. Optional top plate is locked via a M4 screw and a shoe lock to prevent twisting.The top plate can be removed.The top plate and the half cage can be used separately.✔ The top plate comes with an arri 3/8”hole and integrate with a cold shoe for more accessories attachment if needed.✔ It features multiple 1/4-20 threaded holes on the side and bottom for accessory attachment, such as cold shoe 1593 for microphone.✔ Design for Fujifilm X-T3 with VG-XT3 Vertical Battery Grip✔ Design for Fujifilm X-T2 with VPB-XT2 Vertical Battery Grip✔ Product Dimensions: 108X 64X155mm✔ Package Dimensions: 143 x 100 x55mm✔ Net Weight: 190g✔ Package Weight: 235g✔ Material(s): Aluminum Alloy✔ 1 x Bottom Plate✔ 1 x Side Plate✔ 1 x Top Plate✔ 3 x M4 Screw✔ 1x Hex SpannerAt SMALLRIG, not only we offer high quality products,we back them up with 18-month warranty and a 30-day money back guarant...
  • Adafruit Flex Cable for Raspberry Pi Camera - 50mm / 2...
    Precio:  $1,669.00

    Adafruit Flex Cable for Raspberry Pi Camera - 50mm / 2...

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera - 50mm / 2 [ADA1645]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1645 // Stock Type: Raspberry Pi >> Cables >> Camera // In Stock & Ready to Ship // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 50mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well) Flex Cable for Raspberry Pi Camera - 50mm / 2 ( 7:45 ...
  • Adafruit Flex Cable For Raspberry Pi Camsra O Display 300mm
    Precio:  $1,389.00

    Adafruit Flex Cable For Raspberry Pi Camsra O Display 300mm

    -Titulo Original : Adafruit Flex Cable for Raspberry Pi Camera or Display - 300mm / 12-Fabricante : ADAFRUIT-Descripcion Original: Dimensions: 50mm x 16mm (2" x 0.6") // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. // This cable is 50mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well) // Available in 50mm (2"), 100mm (4"), 200mm (8"), 300mm (12") Lengths // Raspberry Pi & Camera Board NOT included // This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 50mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well...
  • Raspberry Pi PWM Servo Hat Development Board
    Precio:  $3,909.00

    Raspberry Pi PWM Servo Hat Development Board

    -Titulo Original : 2327 - Raspberry Pi PWM Servo Hat Development Board-Fabricante : ADAFRUIT-Descripcion Original: The Adafruit 16-Channel 12-bit PWM/Servo HAT will drive up to 16 servos or PWM outputs over I2C with only 2 pins. The on-board PWM controller will drive all 16 channels simultaneously with no additional Raspberry Pi processing overhead. What's more, you can stack up to 62 of them to control up to 992 servos - all with the same 2 pins! // It can also do PWM up to 1.6 KHz with 12 bit precision, all completely free-running. // For use with Raspberry Pi Model A+ or B+, can be used with the Model A or B if you use a tall 2x13 header instead of the included 2x20. // Please note! This kit does not come with Raspberry Pi, servos, or required 5V power supply. // The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these signals, pop on this handy HAT! It adds the capability to control 16 Servos with perfect timing. It can also do PWM up to 1.6 KHz with 12 bit precision, all completely free-running. For use with Raspberry Pi Model A+ or B+, can be used with the Model A or B if you use a tall 2x13 header instead of the included 2x20. The Adafruit 16-Channel 12-bit PWM/Servo HAT will drive up to 16 servos or PWM outputs over I2C with only 2 pins. The on-board PWM controller will drive all 16 channels simultaneously with no additional Raspberry Pi processing overhead. What's more, you can stack up to 62 of them to control up to 992 servos - all with the same 2 pins! Best of all, we even have a Python library you can use, so you'll be up and running instantly, to make your robotic creation com to life. The Adafruit PWM/Servo HAT is the perfect solution for any project that requires a lot of servos or PWM outputs! Each order comes with a Servo HAT, a 2-pin terminal block, four 3x4 headers and a 2x20 socket header. You'll need to do some light through-hole soldering to attach the headers onto the HAT circuit board, but its easy to do with basic soldering tools like a soldering iron and rosin core electronics solder. If you would like to stack multiple HATs onto one Pi, you can also pick up a 2x20 stacking header and a set of right-angle 3x4 headers that should be soldered on instead. Please note! This kit does not come with Raspberry Pi, servos, or required 5V power supply...
  • Raspberry Pi 3 Model B Motherboard (element 14)
    Precio:  $9,139.00

    Raspberry Pi 3 Model B Motherboard (element 14)

    -Titulo Original : Raspberry Pi 3 Model B Motherboard (Element 14)-Fabricante : RASPBERRY PI-Descripcion Original: 1.2GHz 64-bit quad-core ARMv8 CPU, 1 GB RAM // 802.11n Wireless LAN, 10/100Mbps Lan Speed // Bluetooth 4.1, Bluetooth Low Energy // 4 USB ports, 40 GPIO pins, Full HDMI port, Combined 3.5mm audio jack and composite video // Camera interface (CSI),Display interface (DSI), Micro SD card slot (now push-pull rather than push-push), VideoCore IV 3D graphics core // Raspberry Pi 3 Model B Motherboar...
  • Set De 2 Joystick Arcade Mame Raspberry Pi / Usb Pc
    Precio:  $13,199.00

    Set De 2 Joystick Arcade Mame Raspberry Pi / Usb Pc

    -Titulo Original : Fosiya 2 Player Arcade Games Ellipse Oval Style 8 Ways Joystick + 20 x LED Chrome Arcade Buttons for Video Games Standard Controllers All Windows PC MAME Raspberry Pi (Mixed Colors Chrome Buttons)-Fabricante : Fosiya-Descripcion Original: Excellent Control USB Encoder. High Quality Ellipse Oval Style 8 way joystick. LED Buttons Good lighting effects. Perfect LED illuminated parts for 2 player Arcade MAME Jamma and other fighting game DIY Project! Made with highest quality materials! Heat resistant plastic! Environmentally friendly metal! Includes: 2 x 5Pin Arcade Joystick + 2 x USB Encoder + 20 x Chrome plated LED button (1 Player + 2 Player + 2x Coin button). Chrome LED Illuminated push buttons with build-in Blue switch inside, excellent electronic performance, long life, reliability tested to 3,000,000 cycles...
Mostrar del 1 al 24 (de 45 productos)
Páginas de Resultados:  1  2  [Siguiente >>]