Arriba

Drones y Accesorios > Accesorios y Repuestos > Antenas

Mostrar: 
Mostrar del 1 al 24 (de 72 productos)
Páginas de Resultados:  1  2  3  [Siguiente >>] 
  • 2 Piezas Flysky Fs-gr3e Receptor, Largo Alcance 2.4g 3ch Receptor Para Fs-gt2 Fs-gt2b Fs-gt3b Fs-gt3c Fz-it4s Transmisor
    Precio:  $3,891.00

    2 Piezas Flysky Fs-gr3e Receptor, Largo Alcance 2.4g 3ch Receptor Para Fs-gt2 Fs-gt2b Fs-gt3b Fs-gt3c Fz-it4s Transmisor

    -Titulo Original : 2Pcs Flysky FS-GR3E Receiver, Long Range 2.4G 3CH Receiver for FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S RC Car Boat Transmitter-Fabricante : RCMALL-Descripcion Original: Compatible with FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S. // This 3CH receiver is very easy to bind very fast link-up, strong signal distance. // Reliable, interference free 2.4GHz AFHDS signal operation. Long range over 1000 yard. // If you need the FS-GR3E Receiver with waterproof function, please check the link: https://www.amazon.com/dp/B077N5TQTB // Package included: 2 X Flysky FS-GR3E, 2 X Antenna tube, 2 X Bind plug. 30 days money back and 2 years warranty. Any question please contact us feel free. Thanks. // The Standard 2.4Ghz 3-Channel Receiver for RC car and boat Compatible with FS 2.4Ghz Surface Transmitter, very easy to bind Channels: 3 channels Model type: RC Car/boat Modulation: GFSK Code type: PPM Frequency:2.4G Certificate: CE FCC Power:5V DC(1.5AAA x 4)(not included) System type: AFHDS Sensitivity: 1024 Failsafe: yes (channel 2) Bind port: yes (channel 3) Power port: yes (VCC) Specifications: Original box: NO Size:35.5 x 22 x 13mm Ant lenght :180mm Color : Black Net Weight:2g Package weight:8g Matching(Code) A. Install the battery to 2.4G transmitter and shut it down. B. Insert the matching lines to the channel BIND/CH3 port of the receiver. C. Connect the receiver battery to VCC port of the receiver, on the same time the two LED are flashing and this means the receiver are going to the matching status. D. Press and hold the button on the transmitter, and then switch on the power supply. E. Observe the LED on the receiver, if find that the LED is not flash anymore and that means successful Matched. (This process about 5s) F. Release the match button on the transmitter, take out the match line. G. Install the server and then test. H. If the tests fail, please repeat the action above. G. If the tests success, then insert the power supply port into VCC, match complete. (The above ways of match is only suitable for FLYSKY 2.4G products...
  • Frsky Xm Plus Mini Receptor De Hasta 16 Canales 1.6 G De Rango Completo Apto Para Micro Drone
    Precio:  $3,780.00

    Frsky Xm Plus Mini Receptor De Hasta 16 Canales 1.6 G De Rango Completo Apto Para Micro Drone

    -Titulo Original : FrSky XM Plus Mini Receiver up to 16CH 1.6g Full Range fit for Micro Drone-Fabricante : FRSKY-Descripcion Original: This insanely tiny 2.4GHz diversity receiver available from FrSky is the next big thing in miniaturization of racing craft.Perfect for those racers who are looking to lower their AUW. FULL RANGE, so identical to your X4R and D4R setups. // XM Plus Receiver supports failsage function for all channels. Protect your perfectly henever the control signal is lost for a period of time // Up to 16CH from SBUS ( CH1-CH15 for PWM, CH16 RSSI for FC,such as F3, Naze32 flight controller ). Compatible ------ Compatible with Frsky X9D Plus X9E X12S transmitter. // weight:1.6g, Dimension: 21.5*12*3.5mm(L x W x H).Frsky XM Plus mini receiver is perfect for those racers who are looking to lower their AUW, especially for FPV racing drone, mini drone, such as 130 110 drone . // FrSky XM Plus is dual antenna ( Frsky XM is only one), with dual antenna, it has strong anti-interference, make sure you can control your drone anytime. //...
  • Wolfwhoop Wr832 5.8ghz 40ch Receptor Inalambrico Fpv Para Racing Drone Y Multicopter
    Precio:  $3,541.00

    Wolfwhoop Wr832 5.8ghz 40ch Receptor Inalambrico Fpv Para Racing Drone Y Multicopter

    -Titulo Original : Wolfwhoop WR832 5.8GHz 40CH Wireless FPV Receiver for Racing Drone and Multicopter-Fabricante : WOLFWHOOP-Descripcion Original: Long range more than 2km range in the open area - Plug and play // Power off memory: Replay the very last frequency band and channel // Two switching buttons: easy to change frequency channels and bands // 40 channels: 5 bands and all frequencies compatible, Cover A, b, E, F, r bands // Universal video transmitter and receiver for all, compatible with various kinds of remote control toys (RC helicopter, quadcopter, airplane and boat etc.) // This 40 Channel 5.8GHz AV wireless receiver has high power, designed for all kinds of drones. Power Supply: DC 12V Working Frequency: 5.8GHz Sensitivity: >90 dBm Type Standard: NTSC/PAL Consumption Current: 200mA, Max Receiver connector: RP SMA female Antenna connector: RP SMA male Available Channel: 40CH Antenna Gain: 2dbi Audio Carrier: 6.5MHz Audio Output Level: 1.0 Vp-p Typ 10 K Ohm Antenna impedance: 50 Ohm Antenna Input Impedance: 50 Ohm TYP Video impedance: 75 Ohm Video Format : NTSC/PAL Video Output Level: 1.0 Vp-p Typ 75 Ohm Dimension: 80x65x15mm Weight: 85g Dimension (LXWXH): 3.15X2.56X0.59 inches 1 x WR832 5.8GHz 40CH FPV Receiver 1 x Antenna 1 x Power cable 1 x AV cable 1 x User manual Please get a 12V lipo battery for the receiver. We do not suggest over-voltage battery or car battery. Please plug antenna before powering up, otherwise static electricity will damage the product. Wolfwhoop is never good at brand promotion, the only thing we do is manufacturering. Wolfwhoop promise that every piece of product you bought from our store is made by Wolfwhoop self-owned factory. Keep real, keep factory direct. Save money, fly better. Please feel free to contact us if you have new ideas for fpv products...
  • Fpvdrone M8n Modulo Gps Brujula Incorporada + Gps Escudo De Proteccion Contra Interferencias Soporte De Antena Para Apm
    Precio:  $5,694.00

    Fpvdrone M8n Modulo Gps Brujula Incorporada + Gps Escudo De Proteccion Contra Interferencias Soporte De Antena Para Apm

    -Titulo Original : FPVDrone M8N GPS Module Built-in Compass+GPS Anti-interference Shield Stand Antenna Mount for APM 2.6 APM 2.8 Pixhawk Flight Controller-Fabricante : FPVDRONE-Descripcion Original: ★M8N GPS Module for APM2.6 APM2.8 Flight Controller and GPS Antenna Mount to protect the GPS preventing electromagnetic interference. // ★A new generation M8N GPS Module,with low power consumption and high precision. // ★The M8N and ceramic antenna make this a very accurate receiver,fast locks & lots of satellites. // ★★★Note:it is default for APM flight controller,if you use with Pixhawk flight controller,you need to change the connector by yourself. // ★★★Note:When use 2.8 boards with our GPS module must remove the jumper,if you need to calibrate,make the control and GPS compass direction same and keep the two position fixed(cannot make any move,must fix them on quadcopter and then calibrate,or it will be failed.) // Receiver type 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 SBAS L1 C/A: WAAS, EGNOS, MSAS Galileo-ready E1B/C (GPS M8N) Nav. update rate1 Single GNSS: up to 18 HZ Concurrent GNSS: up to 10 Hz Position accuracy2 2.0 m CEP Acquisition2 Cold starts: 26 s Aided starts: 2 s Reacquisition: 1.5 s Sensitivity2 Tracking & Nav: –167 dBm Cold starts: –148 dBm Hot starts: –156 dBm Assistance AssistNow GNSS Online AssistNow GNSS Offline (up to 35 days)3 AssistNow Autonomous (up to 6 days) OMA SUPL & 3GPP compliant Oscillator TCXO (GPS M8N/Q), Crystal (GPS M8M) RTC crystal Built-In Noise figure On-chip LNA (GPS M8M). Extra LNA for lowest noise figure (GPS M8N/Q) Anti jamming Active CW detection and removal. Extra onboard SAW band pass filter (GPS M8N/Q) Memory ROM (GPS M8M/Q) or Flash (GPS M8N) Supported antennas Active and passive Odometer Travelled distance Data-logger For position, velocity, and time (GPS M8N) Operating temp. –40° C to 85° C Storage temp. –40° C to 85° C (GPS M8N/Q) –40° C to 105° C (GPS M8M) RoHS compliant (lead-free) Qualification according to ISO 16750 Manufactured and fully tested in ISO/TS 16949 certified production sites Uses u-blox M8 chips qualified according to AEC-Q100 Supply voltage 1.65 V to 3.6 V (GPS M8M) 2.7 V to 3.6 V (GPS M8N/Q) Power consumption4 23 mA @ 3.0 V (continuous) 5 mA @ 3.0 V Power Save Mode (1 Hz, GPS mode only) Backup Supply 1.4 to 3.6 V GPS M8N-0 GPS M8 Concurrent GNSS LCC Module, TCXO, flash, SAW, LNA, Timepulse Configurable 0.25 Hz to 10 MHz - 1 x M8N GPS Module for APM Flight Controller 1x Black GPS Anti-interference Antenna Mount Holder Stand Cas...
  • 2 Piezas Foxeer Fpv Antena Lollipop 5.8ghz Rhcp 2.5dbi Stubby Antena Sma Para Fpv Racing Drone Fatshark Goggles Tx Rx
    Precio:  $4,102.00

    2 Piezas Foxeer Fpv Antena Lollipop 5.8ghz Rhcp 2.5dbi Stubby Antena Sma Para Fpv Racing Drone Fatshark Goggles Tx Rx

    -Titulo Original : 2pcs FOXEER FPV Antenna Lollipop 5.8GHz RHCP 2.5Dbi Stubby Antenna SMA for FPV Racing Drone Fatshark Goggles TX RX-Fabricante : FOXEER-Descripcion Original: [Updated Version]: 5.8GHz center frequency and 500MHz (5.5 - 6.0 GHz) bandwidth range, FOXEER FPV Antenn have exquisite workmanship, best in class range and signal quality // [IRoot reinfircement design]:FOXEER lollipop antenna can be bent at any angle maintain,360°protection low feeder loss, easy to install // [Imported PC+ABS Material]: FOXEER RHCP antenna for 5.8GHz FPV racing,can withstand high strength impact,support you better range and performance in any orientation // [Longer Transmission Range]:Exquisive workmanship, manufactured and tested to highest standards.Best in class range and signal quality // [Mini size & light weight]:22.7mm height/ 17.4mm Diameter,4.8g / pc // Brand name: Foxeer Item number: Lollipop 3 Shell material: Imported PC + ABS Weight: 4.8g Antenna length: 22.7mm Center frequency: 5.8 GHz Gain: 2.5 Dbi Bandwidth: 500 MHz (5.5-6.0 GHz) Matching: VSWR Axial ratio: Center Frequency: 5750MHz Radiation efficiency: 98% Polarization: LHCP/ RHCP (Optional) Connector: SMA Color: Red 2 x Lollipop 3 re...
  • Transmisor FPV AKK KC02 (xam)
    Precio:  $7,709.00

    Transmisor FPV AKK KC02 (xam)

    -Titulo Original : AKK KC02 40CH 600mW Transmisor FPV con 600TVL 2.8MM 120 Grados de Alta Calidad de Imagen Cámara Sony CCD para Multicoptero FPV-Fabricante : AKK-Descripcion Original: Combination of TPU and Polycarbonate for dual protection from drops and scratches // Reinforced kickstand with raised lips to protect screen and camera // Tactile buttons with precise cutouts raised lips to protect screen and camera // Certified [MIL-STD 810G-516.6] protection and Air Cushion Technology for anti-shock protection // Galaxy S20 Ultra Case Compatible with Samsung Galaxy S20 Ultra //...
  • Akk A2 5.8ghz 200mw Fpv Transmisor Raceband 600tvl 1/4 Cmos Mini Camara Fpv Micro Aio Con Antena Clover Para Fpv Drone
    Precio:  $3,440.00

    Akk A2 5.8ghz 200mw Fpv Transmisor Raceband 600tvl 1/4 Cmos Mini Camara Fpv Micro Aio Con Antena Clover Para Fpv Drone

    -Titulo Original : AKK A2 5.8Ghz 200mW FPV Transmitter Raceband 600TVL 1/4 Cmos Mini FPV Micro AIO Camera with Clover Antenna for FPV Drone-Fabricante : AKK-Descripcion Original: All in one vtx + camera + antenna, plug and play, ready to fly. // Super light weight:4.7g, Small size: 18.7*13mm(L*W) // Clover antenna for better signal transmission, easy to install. Installs in seconds // Requires 1S LiPo battery, Push button operation, single press to change channel,long press to change FR band. // Signal Range Suitable for Ultra Micro RC Aircraft, good quality image with zero latency, Button control instead of switches to change channels //...
  • FOXEER Lollipop 2pcs FPV U.FL Antena 5.8G 2.3dBi Super Mini RHCP Antena UFL para RC Drone FPV Quadcopeter Multicopter TX
    Precio:  $4,010.00

    FOXEER Lollipop 2pcs FPV U.FL Antena 5.8G 2.3dBi Super Mini RHCP Antena UFL para RC Drone FPV Quadcopeter Multicopter TX

    -Titulo Original : FOXEER Lollipop 2pcs FPV U.FL Antenna 5.8G 2.3dBi Super Mini RHCP Antenna UFL for RC Drone FPV Quadcopeter Multicopter TX/RX (85mm)-Fabricante : FOXEER-Descripcion Original: New Foxeer Antenna Lollipop 5.8G 2.3dBi RHCP FPV Antenna UFL Interface // Exquisive workmanship, manufactured and tested to highest standards.Best in class range and signal quality // IRoot reinforcement design 360°protection // Low feeder loss,easy to install, can be bent at any angle maintain // Body adopt imported PC+ABS material, can withstand high strength impact // Color:  |  Size: Shell material: Imported PC+ABS Weight: 2.6g Antenna length:85mm Gain : 2.3 DBi Center frequency: 5.8 GHz Bandwidth: 500 MHz (5.5 – 6.0GHz) Matching: VSWR Axial ratio: Radiation efficiency: 98% Polarization: RHCP Connector: UFL Color:Red 2 x Foxeer Lollipop 5.8G 2.3dBi RHCP FPV Antenna UF...
  • Extensor De Rango De Antena De Radar Parabolico De Cobre Rcstyle Para Dji Phantom 3 Estandar / Se Controlador Transmisor
    Precio:  $1,683.00

    Extensor De Rango De Antena De Radar Parabolico De Cobre Rcstyle Para Dji Phantom 3 Estandar / Se Controlador Transmisor

    -Titulo Original : RCstyle Copper Parabolic Radar Antenna Range Extender for DJI Phantom 3 Standard/SE Controller Transmitter Signal Booster-Fabricante : RCSTYLE-Descripcion Original: Antenna Amplifier / Signal Booster for DJI // Compatible with: DJI Phantom 2, Phantom 3 Standard/SE Remote Control // In the process of flying, it can not frequently lose touch with the DJI phantom 3 standard se // Parabolic reflector is made of metal, usually a metal frame covered with wire mesh on the inside. The metal coating is formed to act as a mirror reflector radar energy. // Boosters are attached so they will not cause the antennas to fall to the side like other products. They will stay in the perfect recommended upright position for maximum signal. // Edition: Our products are affordable not because of product quality problems, but because the majority of our company to make low-cost UAV enthusiasts are able to experience our quality products, we are a manufacturer with its own brand RCstyle, we have the best quality products and service experience for the drone enthusiasts. RCstyle copper antenna signal range booster for DJI Phantom 3 Standard/SE This product is designed for extending the range of transmitter signal, which makes you enjoy much more flying fun. More flying remote control distance means less chance of aircraft lost contact and low risk of the plane crash. Package included: 1 * Copper antenna signal range booster (remote controller and dji phantom are not included...
  • Wolfwhoop PA00 2pcs 5.8GHz 5dBi RHCP Antena omnidireccional de pagoda con anillo protector de goma Set de círculo - RP S
    Precio:  $1,959.00

    Wolfwhoop PA00 2pcs 5.8GHz 5dBi RHCP Antena omnidireccional de pagoda con anillo protector de goma Set de círculo - RP S

    -Titulo Original : Wolfwhoop PA00 2pcs 5.8GHz 5dBi RHCP Omnidirectional Pagoda Antenna with Rubber Protector Ring Circle Set- RP SMA Male-Fabricante : WOLFWHOOP-Descripcion Original: Less flash, stronger signal // Omnidirectional, no dead corner // Highest gain and highest sensibility // Perfect for any tx and rx, goggles, monitors // With rubber protector ring circle for fpv pagoda antenna // A must-have fpv antenna set, born for fpv racing. It features the unrivaled radiation. They can be widely used in racing drones, multirotor like QAV250, which requires highest gain and most stable sensitivity. Item: Pagoda Omnidirectional Antenna Gain : 5dBi Max. Power : 50w Connector : RP SMA male Color : Black Weight : 8.6g Length : 78±3mm Max. Dia. : 22.4±1mm Min. Dia. : 11.8±1mm Frequency : 5.8G Impedance : 50Ω VSWR : Polarization : Circular Polarized Radiation : Omni Item Name : Ring Protector Material : Rubber Color : Black Diameter: 17mm/22mm(big), 9mm/13mm(small) Thickness : 2.5mm(big),2mm(small) Height : 8mm(big), 3mm(small) Weight : 1g 2 x Black RP-SMA Male Antenna 2 x Big rubber protector ringCircle 2 x Small rubber protector ringCircle Thanks to the designer Maarten baert, who gives the idea of pagoda antenna. Wolfwhoop is never good at brand promotion, the only thing we do is manufacturering. Wolfwhoop promise that every piece of product you bought from our store is made by Wolfwhoop self-owned factory. Keep real, keep factory direct. Save money, fly better. Please feel free to contact us if you have new ideas for fpv products...
  • 5.8g Fpv Antena De Parche De Alimentacion Triple Alta Precision 9.4dbi Adaptador De Cable Sma Macho A Sma Macho Antena D
    Precio:  $3,127.00

    5.8g Fpv Antena De Parche De Alimentacion Triple Alta Precision 9.4dbi Adaptador De Cable Sma Macho A Sma Macho Antena D

    -Titulo Original : 5.8G FPV Triple Feed Patch Antenna High Accuracy 9.4dBi SMA Male to SMA Male Cable Adapter Directional Circularly Polarized Antenna for FPV Racing Drone-Fabricante : YOUNGRC-Descripcion Original: ★The FPV Triple Feed Patch antenna is a directional circularly polarized antenna.Connector type is SMA Male to SMA Male. // ★Center frequency: 5.8 GHz,with more better signal transmission,good radiation efficiency. // ★Good axial ratio,not just directly perpendicular to the patch but also off-center. // ★Cheap and easy to manufacture with high accuracy, even for a hobbyist. // ★★Package included: 1 x Triple Feed Patch Antenna, 1 x semi-rigid coax (SMA male to SMA male). 30 days money back and 2 year warranty. If there is any problem please contact us feel free. //   The Triple Feed Patch antenna is a directional circularly polarized antenna. Good radiation efficiency. Most FR4-based patches have terrible efficiency because FR4 is very lossy at 5.8 GHz. Good axial ratio, not just directly perpendicular to the patch but also off-center. Cheap and easy to manufacture with high accuracy, even for a hobbyist.   Cheap and easy to manufacture with high accuracy, even for a hobbyist.   Center frequency: 5.8 GHz Bandwidth: 660 MHz (5.47 - 6.13 GHz) Matching: S11 Axial ratio: Antenna gain: 9.4 dBi Half power beam width: 55° (horizontal and vertical) Radiation efficiency: 83.5% Weight:20.7g Color: black 1 x 5.8GHz FPV Antenna Triple Feed Patch 1 x semi-rigid coax (SMA male - SMA male...
  • Antena TECHTOO FPV Antena Drone Racing Antena 5.8G 2.3dBi Super Mini RHCP con conector macho SMA para RC Drone Fatshark
    Precio:  $3,127.00

    Antena TECHTOO FPV Antena Drone Racing Antena 5.8G 2.3dBi Super Mini RHCP con conector macho SMA para RC Drone Fatshark

    -Titulo Original : TECHTOO FPV Antenna Racing Drone Antenna 5.8G 2.3dBi Super Mini RHCP Antenna w/SMA Male Connector for RC Drone Fatshark Goggles FPV Quadcopeter Multicopter TX/RX (Red-2Pack)-Fabricante : TECHTOO-Descripcion Original: TECHTOO Lollipop FPV Antenna,Llow Feeder Loss, Easy to Install, Can be Bent at Any Angle and Maintain // The Lollipop Antenna Support 5.8G 2.3dBi RHCP FPV Antenna / SMA (with Pin inside connector) // The Pagoda Antenna Body Adopt PC+ABS Material, Can Withstand High Strength Impact // TECHTOO Drone Antenna with Reinforcement Design 360° Protection // Double-Jacket Semi-Rigid Cable for Heavy Impact Resistance for RC Drone FPV Racing Quadcopeter Multicopter // Style: TECHTOO Lollipop Antenna, Drone FPV Antenna 5.8G RHCP 5.8GHz Circular Polarized Omni Cloud Spirit Tx Rx Mini RHCP Antenna for Drone FPV Racing Quadcopeter Multicopter. : Antenna type: Ommi Shell material: PC + ABS Weight: 7.4g/pcs Antenna length: 60mm Center frequency: 5.8GHz Gain: 2.3 Dbi Bandwidth: 500MHz(5.5-6.0GHz) Matching: VSWR Axial ratio: Radiation efficiency: 98% Polarization: RHCP Connector: SMA (with Pin inside connector) Color: Red : 2 x Lollipop FPV SMA Male FPV Antenna (Inner pin...
  • 5.8g 48ch Ts832 Fpv Transmisor 600mw 5km De Largo Alcance Modulo De Transmisor De Video Inalambrico De Audio Para Racing
    Precio:  $3,495.00

    5.8g 48ch Ts832 Fpv Transmisor 600mw 5km De Largo Alcance Modulo De Transmisor De Video Inalambrico De Audio Para Racing

    -Titulo Original : 5.8G 48Ch TS832 FPV Transmitter 600mw 5km Long Range Audio Wireless Video Transmitter Module for Racing Drone-Fabricante : FPVDRONE-Descripcion Original: New version upgrade to 48 channels:cover A,B,C,D,E,F band,and will be more stable and better heat dispersion. // 600mW long range AV wireless system,about 5km range in the open area. // Two switching buttons: CH button for frequencies channels switching, FR button for frequencies bands switching; // Frequency control:built-in frequency and phase lock loop.(Note: Please connect the antenna before powering on) // Independent video and audio signal outputs,real-time positioning which frequency band and which channel received; Power off memory: Replay the very last frequency band and channel; // * Transmitter 600mW/48CH >5km(open area) * Frequency control:built-in frequency and phase lock loop * AV input:analog AV signal input output : 5V * Power supply:7-16V, 220mA *ANT connector:SMA(inside the needle) * Size:54x32x10mm, Weight:22g New version upgrade to the 48 channels 1 x TS832 VTX transmitter 1 x Power cable for TS83...
  • Makerfire 2pcs 5.8GHz Antena FPV Circular Polarizada TX RX RHCP RPSMA para FPV Racing Drone como QAV250
    Precio:  $3,320.00

    Makerfire 2pcs 5.8GHz Antena FPV Circular Polarizada TX RX RHCP RPSMA para FPV Racing Drone como QAV250

    -Titulo Original : Makerfire 2pcs 5.8GHz FPV Antenna Circular Polarized TX RX RHCP RPSMA for FPV Racing Drone Like QAV250-Fabricante : MAKERFIRE-Descripcion Original: Connector: RPSMA // Gain: 3DBi,Frequency range: 5600-5950 MHz // Material: Cu, Weight: 12g // 5.8 GHz Circular Polarized Antenna Set for transmitter and receiver // Omnidirectional: 3dB horizontal lobe width: 360°,3dB verticle lobe width: 120° // Size: 5.8G FPV Antenna Circular Polarized Omni Cloud Spirit Tx Rx RPSMA for FPV Multicopter This circular polarized omni antenna can be used both at VTx antenna andVRxantenna Frequency range: 5600-5950 MHz Gain : 3DBi SWR: andlt;1.5 3dB horizontal lobe width: 360° 3dB verticle lobe width: 120° Max power: 50W Resistance: 50Ω Lightning protection: DC Grounded Polarization: RHCP Connector: RPSMA Size: 105×35mm (feeder line 75mm) Weight: 12g Material: Cu -------------------------------------------------------- Package Including 2 * 5.8G Circular Polarized Omni Antenna RPSM...
  • Monitor Receptor Camara Drone 4.3 480x320px 48ch Readytosky
    Precio:  $8,776.00

    Monitor Receptor Camara Drone 4.3 480x320px 48ch Readytosky

    -Titulo Original : Readytosky 4.3 FPV Monitor 48CH 480 x 22 LCD Wireless Receiver Monitor Built-in Battery with Sun Hood LCD Hood Shade for RC FPV Quadcopter-Fabricante : Readytosky-Descripcion Original: ★This FPV monitor is a small sized 4.3 screen with a super bright LCD. ★The monitor features with 48 channel swith easy to use push buttons and an auto search feature. ★The integrated battery keeps your FPV ground station compact and easy to use. ★Low power consumption, stable performance, no radiation, etc. ★4.3 inch screen brings best display of the image. 361/5000 ★ Este monitor FPV es una pantalla pequeña de 4.3 con una pantalla LCD súper brillante. ★ El monitor cuenta con 48 canales con botones fáciles de usar y una función de búsqueda automática. ★ La batería integrada mantiene su estación terrestre FPV compacta y fácil de usar. ★ Bajo consumo de energía, rendimiento estable, sin radiación, etc. ★ La pantalla de 4.3 pulgadas ofrece la mejor visualización de la imagen...
  • Wolfwhoop Pr00 2 Piezas 5.8ghz 5dbi Fpv Panel Plano Rhcp Omnidirectional Pagoda Transmisor Y Receptor Conjunto De Antena
    Precio:  $2,069.00

    Wolfwhoop Pr00 2 Piezas 5.8ghz 5dbi Fpv Panel Plano Rhcp Omnidirectional Pagoda Transmisor Y Receptor Conjunto De Antena

    -Titulo Original : Wolfwhoop PR00 2pcs 5.8GHz 5dBi FPV Flat Panel RHCP Omnidirectional Pagoda Transmitter and Receiver Antenna Set for FPV Multicopter - RP SMA Male (Red)-Fabricante : WOLFWHOOP-Descripcion Original: Omnidirectional radiation pattern, and good axial ratio // With rubber protector ring circle for fpv pagoda antenna // Less flash, stronger signal, Highest gain and highest sensibility // Reasonably small and perfect performance, ideal for racing drones // Nearly full coverage in a certain space, which means the excellent connectivity // A must-have fpv antenna set, born for fpv racing. It features the unrivaled radiation. They can be widely used in racing drones, multirotor like QAV250, which requires highest gain and most stable sensitivity. Item: Pagoda Omnidirectional Antenna Gain : 5dBi Max. Power : 50w Connector : RP SMA male Color : Red Weight : 8.6g Length : 78±3mm Max. Dia. : 22.4±1mm Min. Dia. : 11.8±1mm Frequency : 5.8G Impedance : 50Ω VSWR : Polarization : Circular Polarized Radiation : Omni Item Name : Ring Protector Material : Rubber Color : Red Diameter: 17mm/22mm(big), 9mm/13mm(small) Thickness : 2.5mm(big),2mm(small) Height : 8mm(big), 3mm(small) Weight : 1g 2 x Red RP SMA Male Antenna 2 x Big rubber protector ringCircle 2 x Small rubber protector ringCircle Thanks to the designer Maarten baert, who gives the idea of pagoda antenna. Wolfwhoop is never good at brand promotion, the only thing we do is manufacturering. Wolfwhoop promise that every piece of product you bought from our store is made by Wolfwhoop self-owned factory. Keep real, keep factory direct. Save money, fly better. Please feel free to contact us if you have new ideas for fpv products...
  • Blueproton Montaje En Auto Para Dji Phantom 3 Standard / Se
    Precio:  $3,467.00

    Blueproton Montaje En Auto Para Dji Phantom 3 Standard / Se

    -Titulo Original : BlueProton ARGtek Car Kit Mount for DJI Phantom 3 Standard/SE-Fabricante : BLUEPROTON-Descripcion Original: 1 x 1.5M RG316 Extended Cable Car kit // 1 x Antenna Mount // 1 x Suction Cup // Stay inside your car or house amd fly your Phantom 3 Standard from the comfort of the indoors! This Car kit accessories is For DJI Phantom 3 Standard/SE ARGtek Extender Kit 1 x Suction Cup 1 x Antenna Mount 1 x 1.5M RG316 Extended Cable Car kit The best way to use DJI Intelligent modes with the remote indoor, antenna kit put outdoor, use Omni-Directional Antenna Lightweight, durable, practical and convenient to use in compact design. This package is for the people who have the ARGtek Extender Kit. EXT1 Please make sure you have already installed the ARGtek antennas kit for P3 Standard before you purchase the car kit. The car kit does not include the antennas and remote control mount...
  • Rcgeek Drone Range Extender Amplificador De Señal Antena Plegable Compatible Con Dji Mavic Pro Mavic 2 Pro / Zoom Mavic
    Precio:  $2,179.00

    Rcgeek Drone Range Extender Amplificador De Señal Antena Plegable Compatible Con Dji Mavic Pro Mavic 2 Pro / Zoom Mavic

    -Titulo Original : RCGEEK Drone Range Extender Signal Booster Antenna Foldable Compatible with DJI Mavic Pro Mavic 2 Pro/Zoom Mavic Air DJI Spark Remote Controller, 1 Piece-Fabricante : RCGEEK-Descripcion Original: 【Compatibility】- Compatible with DJI Mavic 2 Pro Mavic 2 Zoom DJI Spark Mavic Pro Mavic Air Remote Controller. Turn on the signal booster, according to the hole position, placing it to the original antenna of the remote control, it start working. No installation tools required. // 【Material】- Made by Copper, Effectively prevent oxidation, Increase the reflection area, Lasting effective and durable. // 【Parabolic reflector】- Using the principle of metal reflection principle, power amplification of high frequency modulated signals. Increase signal transmission distance and range to improves both remote control and Wi-Fi video connection performance for DJI Spark/Mavic Air/Mavic Pro and flight shooting experience. // 【Accurate parabolic】- Parabolic curved booster completely reflects the remote signal to the antenna, Effectively avoid air crash events caused by missing signals. // 【Foldable design】- Convenient to carry and store. Packing: 1 x Signal booster, DJI remote controllers are not included. // Style: Feature: Fit for your DJI Spark Mavic Pro Remote Controller. Made by Copper, Effectively prevent oxidation . Parabolic reflector. No bump or deformation on the reflecting panel, improves both remote control and Wi-Fi video connection performance for DJI Spark /Mavic Pro Accurate parabolic curved booster completely reflects the remote signal to the antenna (the focal point of the reflector) DJI remote controllers are not included. Packing List: 1 x Range Extende...
  • AKK 2pcs 5.8GHz 5dBi FPV Flat Panel RHCP SMA Antena pagoda macho para TX y RX
    Precio:  $2,152.00

    AKK 2pcs 5.8GHz 5dBi FPV Flat Panel RHCP SMA Antena pagoda macho para TX y RX

    -Titulo Original : AKK 2pcs 5.8GHz 5dBi FPV Flat Panel RHCP SMA Male Pagoda Antenna for TX and RX-Fabricante : AKK-Descripcion Original: Connector : SMA male // 2pcs SMA Male Pagoda Antenna kit // Flat Panel RHCP Omnidirectional Pagoda Antenna // Impedance : 50Ω, Polarization : Circular Polarized // Item: Pagoda Omnidirectional AntennaGain : 5dBiMax. Power : 50wConnector : SMA maleWeight : 8.6gLength : 78.3±3mmMax. Dia. : 22.4±1 mmMin. Dia. : 11.8±1mm Frequency : 5.8GImpedance : 50ΩVSWR : 2 x SMA Male Antenna 2 x Big rubber protector ringCircle2 x Small rubber protector ringCircl...
  • FOXEER Thriverline FPV Antena 5.8GHz Pagoda RHCP Antena omnidireccional para FPV Quadcopeter TX / RX (Negro, RP-SMA)
    Precio:  $2,658.00

    FOXEER Thriverline FPV Antena 5.8GHz Pagoda RHCP Antena omnidireccional para FPV Quadcopeter TX / RX (Negro, RP-SMA)

    -Titulo Original : FOXEER Thriverline FPV Antenna 5.8GHz Pagoda RHCP Omnidirectional Antenna for FPV Quadcopeter TX/RX (Black, RP-SMA)-Fabricante : FOXEER-Descripcion Original: Foxeer newest 5.8GHz 2dBi Pagoda antenna for FPV multicopter TX/RX // Omnidirectional, suit for 5.8G AV transmitter and receiver with high efficiency // 5.8GHz working frequency and 500MHz (5.5 - 6.0 GHz) bandwidth range // Matching: Return Loss (S11) -20 dB, VSWR 1.15 (Center Frequency) // 68mm long with light weight 11g // Edition: Specification: Center frequency: 5.8 GHz Bandwidth: 500 MHz (5.55 – 6.05 GHz) Matching: S11 Axial ratio: Gain : 2dBi Radiation efficiency: 95% Polarization: RHCP Connector:RP-SMA for optional Color:Black Length:68mm Weight: 10g Package include: 1 x Foxeer Pagoda Pro 5.8GHz 2dBi RHCP FPV Antenna 68m...
  • Nidici Foxeer Lollipop 3 Fpv U.fl Antena 5.8g 2.5dbi Super Mini Rhcp Antena Ufl Para Rc Drone Fpv Quadcopeter Multicopte
    Precio:  $4,102.00

    Nidici Foxeer Lollipop 3 Fpv U.fl Antena 5.8g 2.5dbi Super Mini Rhcp Antena Ufl Para Rc Drone Fpv Quadcopeter Multicopte

    -Titulo Original : nidici Foxeer Lollipop 3 FPV U.FL Antenna 5.8G 2.5DBi Super Mini RHCP Antenna UFL for RC Drone FPV Quadcopeter Multicopter TX/RX (85mm)-Fabricante : FOXEER-Descripcion Original: New Foxeer Antenna Lollipop 5.8G 2.5DBi RHCP FPV Antenna UFL Interface // Exquisive workmanship, manufactured and tested to highest standards.Best in class range and signal quality // IRoot reinforcement design 360°protection // Low feeder loss,easy to install, can be bent at any angle maintain // Body adopt imported PC+ABS material, can withstand high strength impact // Style: Foxeer Antenna Lollipop-3 5.8G 2.5DBi RHCP FPV Antenna Specification: Shell material: Imported PC+ABS Weight: 2.8g Antenna length:85mm Gain : 2.5DBi Center frequency: 5.8 GHz Bandwidth: 500 MHz (5.5 – 6.0GHz) Matching: VSWR Axial ratio: Center frequency:5750MHz Radiation efficiency: 98% Polarization: RHCP Connector: UFL Color:Black Package Included: 2 x Foxeer Lollipop 3 5.8G 2.5DBi RHCP FPV Antenna UF...
  • Cascos para Drone 1024x600 HD 5.8GHZ Flysight View Optix
    Precio:  $35,971.00

    Cascos para Drone 1024x600 HD 5.8GHZ Flysight View Optix

    -Titulo Original : Flysight View Optix HD 5.8ghz Goggles W/HDMI and AV DVR-Fabricante : Flysight-Descripcion Original: USB charger cable built in over charging, over discharging, over temperature protection. Ensure safe charging and using. Specification: Chemistry: Li-Polymer Voltage: 7.4V Capacity: 1600mAh (real capacity,more than 9125 original battery,size and weight both more than original) Discharge: 25C Charge Plug: JST-XH Discharge Plug: T Connector Battery Dimension: Physical 2.8(L)X1.4(W) X0.8(H) inch Package include 1 X Battery 1 X USB Charger Cable 1 X Blomiky Clean Wip...
  • Rcgeek Range Extender Amplificador De Señal Antena Cobre Parabolico Compatible Con Dji Phantom 3 Control Remoto Estanda
    Precio:  $2,152.00

    Rcgeek Range Extender Amplificador De Señal Antena Cobre Parabolico Compatible Con Dji Phantom 3 Control Remoto Estanda

    -Titulo Original : RCGEEK Range Extender Signal Booster Antenna Copper Parabolic Compatible with DJI Phantom 3 Standard Phantom 3 SE Remote Controller-Fabricante : RCGEEK-Descripcion Original: Fit for your DJI Phantom 3 Standard DJI Phantom 3 SE Remote Controller. // Made by Copper, Effectively prevent oxidation . // Parabolic reflector. No bump or deformation on the reflecting panel,improves both remote control and Wi-Fi video connection performance for DJI Phantom 3 SE/Standard // Accurate parabolic curved booster completely reflects the remote signal to the antenna (the focal point of the reflector) // DJI remote controllers are not included. // Feature: Fit for your DJI Phantom 3 Standard Remote Controller. Material: ABS Plastic + Copper, Effectively prevent oxidation . Parabolic reflector. No bump or deformation on the reflecting panel, improves both remote control and Wi-Fi video connection performance for DJI Phantom 3 Standard/SE Accurate parabolic curved booster completely reflects the remote signal to the antenna (the focal point of the reflector) DJI remote controllers are not included. Packing List: 1x DJI Phantom 3/SE Standard Signal Booste...
  • Akk K31 600mw 5v Fuera Para El Transmisor Cam Mini Av Fpv Con Band Race
    Precio:  $2,547.00

    Akk K31 600mw 5v Fuera Para El Transmisor Cam Mini Av Fpv Con Band Race

    -Titulo Original : AKK K31 600mW 5V Out for Cam Mini AV FPV Transmitter with Race Band-Fabricante : AKK-Descripcion Original: 5V Output for Cam, Super mini, lightweight and durable // Connector: RP-SMA Female (Inner needle), Antenna Connector: RP-SMA Male (Inner hole) // 40 CH including raceband, channel cover A, b, E ,F, r bands. // Power off memory: replay the very last frequency band and channel. // Easy to use 2 buttons and 2 LED display to change channels and frequencies conveniently. // Double push buttons for easy changing CH and FR. Channels: Cover A, b, E, F, r bands. Small size and light weight. 2 buttons and 2 LED display to change channels and frequencies Video Format: NTSC/PAL Output Impedance: 50 Ohm Transmitting distance: > 3000m (open area) Antenna connector: RP-SMA connector Output Power: 26-28dBm Operating Voltage: 7-20 V Output Voltage(VOUT): 5 V Supply Current: 280 mA Operating Temperature : -10 +85 ℃ Video Band Width: 0-8.0 MHz Audio carrier Frequency: 6.5 MHz Video Input Level: 0.8,1.0,1.2 Vp-p Video Input Impedance: 75 Ohm Audio Input Level: 0.5 ,2.0 Vp-p Audio Input Impedance: 10K Ohm Size: 31mm*25mm*8mm Weight: 10g 1X5.8G FPV transmitter 1X5.8G antenna 1XConnector and cable set 1X Product manual The VTX can supply 5V output for Camera. Please make sure your camera is less than 300mA Please plug antenna before powering on the vtx to avoid static electricity The line of the manual should be V OUT GND 'VIDEO IN GND 7-24V...
Mostrar del 1 al 24 (de 72 productos)
Páginas de Resultados:  1  2  3  [Siguiente >>]