Componentes Electrónicos > Semiconductores > Circuitos Integrados
Mostrar del 73 al 96 (de 190 productos)
-
Expira:
05/02/2024Precio: $32,169.00 -
Precio: $108,169.00
-
Precio: $48,529.00
-
Precio: $51,459.00
-
Expira:
07/10/2023Precio: $34,299.00 -
Precio: $45,709.00
-
Precio: $98,569.00
-
Expira:
09/05/2021Precio: $78,679.00
-
Precio: $70,249.00
-
Precio: $71,169.00
-
Precio: $104,829.00
-
Precio: $55,589.00
-
Precio: $43,739.00
-
Precio: $40,239.00
-
Precio: $60,249.00
-
Precio: $56,719.00
-
Expira:
12/12/2021Precio: $123,019.00 -
Precio: $85,309.00
-
Precio: $128,729.00
-
Expira:
06/04/2023Precio: $84,829.00
-
Precio: $27,639.00
-
Precio: $106,159.00
-
Precio: $46,309.00
-
Precio: $33,049.00
-
Precio: $32,169.00Expira: 05/02/2024
Adafruit 783 2 X 2032 Coin Cell Battery Holder - 6V Output W
-Titulo Original : Adafruit 2 X 2032 Coin Cell Battery Holder - 6V Output With On/Off Switch [ADA783]-Fabricante : Adafruit-Descripcion Original: 2 x 2032 Coin Cell Battery Holder - 6V output with On/Off switch [ADA783... -
Precio: $108,169.00
Adafruit 790 Ultimate GPS Module - 66 Channel W/10 Hz Update
-Titulo Original : Adafruit Ultimate GPS Module - 66 Channel W/10 Hz Updates [ADA790]-Fabricante : Adafruit-Descripcion Original: For those who want to integrate our awesome Ultimate GPS module into their own projects, we now have the raw sub-module available. Don't be fooled by it's small size, this is a very sensitive, high quality GPS module with all the extras you could want and more at under 6 grams! It's got everything you want and more: -165 dBm sensitivity, 10 Hz updates, 66 channels Ultra low power usage: 20mA current draw while tracking 3.3V operation, RTC battery-compatible Built-in datalogging PPS output on fix We have received reports that it works up to ~32Km altitude (the GPS theoretically does not have a limit until 40Km) Internal patch antenna + connection for optional external active antenna Fix status output Ultra small size: only 16mm x 16mm x 5mm and 4 grams This module is built around the MTK3339 chipset, a no-nonsense, high-quality GPS module that can track up to 22 satellites on 66 channels, has an excellent high-sensitivity receiver (-165 dB tracking!), and a built in antenna. It can do up to 10 location updates a second for high speed, high sensitivity logging or tracking. Power usage is incredibly low, only 20 mA during navigation. Two features that really stand out about version 3 MTK3339-based module is the external antenna functionality and the the built in data-logging capability. The module has a standard ceramic patch antenna that gives it -165 dB sensitivity, but when you want to have a bigger antenna, you can attach an active antenna to the ANT pad. The module will automatically detect the active antenna and switch over! The other cool feature of the new MTK3339-based module (which we have tested with great success) is the built in datalogging ability. Since there is a microcontroller inside the module, with some empty FLASH memory, the newest firmware now allows sending commands to do internal logging to that FLASH. The only thing is that you do need to have a microcontroller send the Start Logging command. However, after that message is sent... -
Precio: $48,529.00
Adafruit 8 x AA battery holder with 5.5mm/2.1mm Plug and On/
-Titulo Original : Adafruit 8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch [ADA875]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 875 // Stock Type: Power >> Battery Holders >> AA // In Stock & Ready to Ship // Make a portable power brick with plenty of juice! Use Alkaline AA's for a 12V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 9.6V supply. Either one is good for running electronics that have a 5V voltage regulator (thus requiring a 7V+ supply) or perhaps some motors or solenoids. Perfect for portable Arduinos, motors, solenoids, 12V LED strips, etc. An On/Off switch lets you control the power right at the source without unplugging. Batteries not included, may or may not include screws... -
Precio: $51,459.00
Adafruit 8-channel Bi-directional Logic Level Converter [ad
-Titulo Original : Adafruit 8-Channel Bi-Directional Logic Level Converter [ADA395]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 395 // Stock Type: Breakout Boards >> Level Shifters & Expanders // In Stock & Ready to Ship // Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V. Although one can use resistors to make a divider, for high speed transfers, the resistors can add a lot of slew and cause havoc that is tough to debug. For that reason, we like using 4050/74LVX245 series and similar logic to perform proper level shifting. Only problem is that they are only good in one direction which can be a problem for some specialty bi-diectional interfaces and also makes wiring a little hairy. That's where this lovely chip, the TXB0108 bi-directional level converter comes in! This chip perform bidirectional level shifting from pretty much any voltage to any voltage and will auto-detect the direction . Only thing that doesn't work well with this chip is i2c (because it uses strong pullups which confuse auto-direction sensor). If you need to use pullups, you can but they should be at least 50K ohm - the ones internal to AVRs/Arduino are about 100K ohm so those are OK! Its a little more luxurious than a 74LVX245 but if you just don't want to worry about directional pins this is a life saver! Since this chip is a special bi-directional level shifter it does not have strong output pins that can drive LEDs or long cables, it's meant to sit on a breadboard between two logic chips! If you do not need instant bi-directional support, we suggest the 74LVX245 as below which has strong output drive. This breakout saves you from having to solder the very fine pitch packages that this chip comes with. We also add 0.1uF caps onto both sides and a 10K pull-up resistor on the output enable pin so you can use it right out of the box...
-
Precio: $34,299.00Expira: 07/10/2023
Adafruit 977 Accessories TO-220 Clip-On Heatsink 1 Piece
-Titulo Original : Adafruit Accessories TO-220 Clip-On Heatsink (1 Piece)-Fabricante : Adafruit-Descripcion Original: Get the most out of your regulators, transistors and other TO-220 packaged chips by clipping on a heat-sink. Your transistor or regulator may advertise it can handle high currents but when multiplied by the drop voltage, the Wattage may be too high for the bare chip! Most TO-220's can disipate about 2W's worth without a sink... -
Precio: $45,709.00
Adafruit AC, DC & Servo Motors Sub-Micro Servo SG51R (1 piec
-Titulo Original : AC, DC & Servo Motors Sub-Micro Servo SG51R (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2201 // Stock Type: Robotics & CNC >> Robotics // In Stock & Ready to Ship // This is just about the cutest, tiniest little micro servo we could find, even smaller than the 9 gram micro servos we love so much. It can rotate approximately 180 degrees (90 in each direction) and works just like the standard kind you're used to but much smaller . You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. Of course, its not nearly as strong as a standard servo. Works great with the Motor Shield for Arduino or by just wiring up with the Servo library. Comes with a few horns and hardware. To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE ( see here for an example sketch ). Position 0 (1.5ms pulse) is middle, 90 (~2ms pulse) is all the way to the right, -90 (~1ms pulse) is all the way to the left... -
Precio: $98,569.00
Adafruit Adxl326 - 5v Ready Triple-axis Accelerometer (+-16
-Titulo Original : Adafruit ADXL326 - 5V ready triple-axis accelerometer (+-16g analog out) [ADA1018]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1018 // Stock Type: Sensors >> Motion // In Stock & Ready to Ship // We've now got a wider range version of favorite triple-axis accelerometer - it even has an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the Arduino. This breakout comes with 3 analog outputs for X, Y and Z axis measurements on a 0.75x0.75 breakout board. The ADXL326 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. The VCC takes up to 5V in and regulates it to 3.3V with an output pin. The analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -16g is at 0v and 16g is at 3.3V with full scaling in between. Fully assembled and tested. Comes with 8 pin 0.1 standard header in case you want to use it with a breadboard or perfboard. Two 2mm (0.08) mounting holes for easy attachment. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth See the ADXL326 webpage for datasheets and mor... -
Precio: $78,679.00Expira: 09/05/2021
Adafruit Adxl335-5v Ready Triple-axis Accelerometer (+-3g A
-Titulo Original : Adafruit ADXL335-5V Ready Triple-axis Accelerometer (+-3g Analog Out) [ADA163]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 163 // Stock Type: Sensors >> Motion // In Stock & Ready to Ship // We've updated our favorite triple-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the Arduino. This breakout comes with 3 analog outputs for X, Y and Z axis measurements on a 0.75x0.75 breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. The VCC takes up to 5V in and regulates it to 3.3V with an output pin. The analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between. Fully assembled and tested. Comes with 8 pin 0.1 standard header in case you want to use it with a breadboard or perfboard. Two 2mm (0.08) mounting holes for easy attachment. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidt...
-
Precio: $70,249.00
Adafruit Analog 2-axis Thumb Joystick with Select Button + B
-Titulo Original : Adafruit Analog 2-axis Thumb Joystick with Select Button + Breakout Board [ADA512]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 512 // Stock Type: Sensors >> Touch // In Stock & Ready to Ship // This mini-kit makes it easy to mount a PSP/Xbox-like thumb joystick to your project. The thumbstick is an analog joystick - more accurate and sensitive than just 'directional' joysticks - with a 'press in to select' button. Since it's analog, you'll need two analog reading pins on your microcontroller to determine X and Y. Having an extra digital input will let you read the switch. The pack comes in three parts - the joystick itself, a soft-touch rubber 'hat' and a nicely designed breakout board. We designed the breakout so that you can attach the joystick to a panel easily - every other breakout we wanted to carry had the mounting holes so they were in the way of the joystick movement! A 5 pin 0.1 spaced header makes it easy to connect either in a perfboard/breadboard setting or free wiring. You'll need to solder the joystick into the PCB using a soldering iron and solder, but its very simple and will only take a minute... -
Precio: $71,169.00
Adafruit Analog Output K-Type Thermocouple Amplifier - AD849
-Titulo Original : Adafruit Analog Output K-Type Thermocouple Amplifier - AD8495 Breakout [ADA1778]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1778 // Stock Type: Sensors >> Temperature // In Stock & Ready to Ship // Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. We have a couple digital thermocouple amplifiers in the shop already from Maxim. Now we're happy to introduce an excellent analog-output amplifier. This is a very simple sensor to use, and if your microcontroller has analog input capability, you'll be ready to go really fast! The AD8495 K-type thermocouple amplifier from Analog Devices is so easy to use, we documented the whole thing on the back of the tiny PCB. Power the board with 3-18VDC and measure the output voltage on the OUT pin. You can easily convert the voltage to temperature with the following equation: Temperature = (Vout - 1.25) / 0.005 V. So for example, if the voltage is 1.5VDC, the temperature is (1.5 - 1.25) / 0.005 = 50°C Each order comes with a 2 pin terminal block (for connecting to the thermocouple), a fully assembled PCB with the AD8495 + TLVH431 1.25V precision voltage reference, and pin header (to plug into any breadboard or perfboard). Goes great with our 1m K-type thermocouple (not included) . Not for use with any other kind of thermocouple, K type only!Works with any K type thermocoupleWill not work with any other kind of thermocouple other than K typeEasy to use analog outputTemp range with 5V power: -250°C to +750°C output (0 to 5VDC) as long as the thermocouple can handle that rangeTemp range with 3.3V power: -250°C to +410°C output (0 to 3.3VDC) as long as the thermocouple can handle that rang... -
Precio: $104,829.00
Adafruit Antennas GPS Antenna 3-5V 28dB 5 meter SMA
-Titulo Original : Antennas GPS Antenna 3-5V 28dB 5 meter SMA-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 960 // Stock Type: Wireless >> Antennas // In Stock & Ready to Ship // Give your Ultimate GPS V3 a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 5 meter long cable so it will easily reach wherever you need it to. The antenna is magnetic so it will stick to the top of a car or truck (or any other steel structure) Comes with a standard SMA connector on the end. If you want to connect to our Ultimate GPS V3 module, be sure to pick up a uFL to SMA adapter! GPS not included... -
Precio: $55,589.00
Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor
-Titulo Original : Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor-Fabricante : ADAFRUIT-Descripcion Original: This breakout is chock full o' sensors! Add basic gesture sensing, RGB color sensing, proximity sensing, or ambient light sensing to your project with the Adafruit APDS9960 Proximity, Light, RGB and Gesture Sensor. When connected to your microcontroller (running our library code) it can detect simple gestures (left to right, right to left, up to down, down to up are currently supported), return the amount of red, blue, green, and clear light, or return how close an object is to the front of the sensor. This device uses an I2C interface so it's easy to wire up and use. The APDS9960 from Avago Technologies has an integrated IR LED and driver, along with four directional photodiodes that sense reflected IR energy from the LED. It's proximity detection feature allows it to measure the distance an object is from the front of the sensor (up to a few centimeters) with 8 bit resolution...
-
Precio: $43,739.00
Adafruit Assembled Pi Cobbler Plus - Breakout Cable - for Pi
-Titulo Original : Adafruit Assembled Pi Cobbler Plus - Breakout Cable - for Pi B+/A+/Pi 2/Pi 3-Fabricante : ADAFRUIT-Descripcion Original: - //... -
Precio: $40,239.00
Adafruit Audio Ic Development Tools Mono 2.5w Class D Audio
-Titulo Original : Audio IC Development Tools Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302 (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2130 // Stock Type: Breakout Boards >> Amplifiers/Sound // In Stock & Ready to Ship // This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.0V-5.5VDC. Since the amp is a class D, its very efficient (over 90% efficient when driving an 8Î speaker at over half a Watt) - making it perfect for portable and battery-powered projects. It has built in thermal and over-current protection but we could barely tell it got hot. There's even a volume trim pot so you can adjust the volume on the board down from the default 24dB gain. This board is a welcome upgrade to basic LM386 amps! The A+ and A- inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply tie the Audio- pin to ground. The output is Bridge Tied - that means the output pins connect directly to the speaker pins, no connection to ground. The output is a high frequency 250KHz square wave PWM that is then 'averaged out' by the speaker coil - the high frequencies are not heard. All the above means that you can't connect the output into another amplifier, it should drive the speakers directly. Comes with a fully assembled and tested breakout board. We also include header to plug it into a breadboard and a 3.5mm screw-terminal blocks so you can easily attach/detach your speaker. You will be ready to rock in 15 minutes! Output Power: 2.5W at 4Î, 10% THD, 1.5W at 8Î, 10% THD, with 5.5V Supply50dB PSRR at 1KHzFilterless design, with ferrite bead + capacitors on output.Fixed 24dB gain, onboard trim potentiometer for adjusting input volume.Thermal and short-circuit/over-current protectionLow current draw: 4mA quiescent and 1uA in shutdown mod... -
Precio: $60,249.00
Adafruit Audio IC Development Tools Stereo 2.8W Class D Audi
-Titulo Original : Audio IC Development Tools Stereo 2.8W Class D Audio Amplifier - I2C Control AGC - TPA2016 (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1712 // Stock Type: Breakout Boards >> Amplifiers/Sound // In Stock & Ready to Ship // A mini class D with AGC and I2C control? Yes please! This incredibly small stereo amplifier is surprisingly powerful. It is able to deliver 2 x 2.8W channels into 4 ohm impedance speakers (@ 10% THD) and it has a i2c control interface as well as an AGC (automatic gain control) system to keep your audio from clipping or distorting. If you don't want to use I2C to control it, it does start up on with 6dB gain by default and the AGC set up for most music playing. We do suggest using it with a microcontroller to configure it, however, since its quite powerful. Settings are not stored in the chip, so you'll need to adjust any gain & AGC amplification settings every time the amp is powered up. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, it's incredibly efficient (89% efficient when driving an 8Ω speaker at 1.5 Watt) - making it perfect for portable and battery-powered projects. It has built in thermal and over-current protection but we could barely tell if it got hot. This board is a welcome upgrade to basic LM386 amps! The inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply tie the R- and L- to ground. The outputs are Bridge Tied - that means they connect directly to the outputs, no connection to ground. The output is a ~300KHz square wave PWM that is then 'averaged out' by the speaker coil - the high frequencies are not heard. All the above means that you can't connect the output into another amplifier, it should drive the speakers directly. Comes with a fully assembled and tested breakout board with 1.0uF input capacitors. We also include 3.5mm screw-terminal blocks so you can easily attach/detach your speakers, and some header in case you want to plug it into a breadboard. Speakers are not includ... -
Precio: $56,719.00
Adafruit Audio IC Development Tools Stereo 3.7W Class D Audi
-Titulo Original : Audio IC Development Tools Stereo 3.7W Class D Audio Amplifier (1 Piece)-Fabricante : ADAFRUIT-Descripcion Original: Price For: Pack of 1 Manufacturer: Adafruit Product Category: Audio IC Development Tools RoHS: Brand: Adafruit Packaging: Bulk // This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, its incredibly efficient (over 90% efficient when driving an 8Ω speaker at over a Watt) - making it perfect for portable and battery-powered projects. It has built in thermal and over-current protection but we could barely tell it got hot. This board is a welcome upgrade to basic LM386 amps! The inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply tie the R- and L- to ground. The outputs are Bridge Tied - that means they connect directly to the outputs, no connection to ground. The output is a 360KHz square wave PWM that is then 'averaged out' by the speaker coil - the high frequencies are not heard. All the above means that you can't connect the output into another amplifier, it should drive the speakers directly. Comes with a fully assembled and tested breakout board with 1.0uF input capacitors. We also include header to plug it into a breadboard, 3.5mm screw-terminal blocks so you can easily attach/detach your speakers, and a 2x4 header + jumper to change the amplifier gain on the fly. You will be ready to rock in 15 minutes! Speakers are not included, use any 3ohm or greater impedance speakers...
-
Precio: $123,019.00Expira: 12/12/2021
Adafruit Bluefruit Le Sniffer - Bluetooth Low Energy (ble 4
-Titulo Original : Adafruit Bluefruit LE Sniffer - Bluetooth Low Energy (BLE 4.0) - nRF51822 - v2.0 [ADA2269]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2269 // Stock Type: Wireless >> Bluetooth // In Stock & Ready to Ship // Interested in learning how Bluetooth Low Energy works down to the packet level? Debugging your own BLE hardware, and trying to spot where something is going wrong? Or maybe you're writing a custom application for your phone or tablet that needs to talk to existing BLE hardware, but you don't know how it works beneath the surface? We have the perfect tool for you!This Bluefruit LE Friend is programmed with a special firmware image that turns it into an easy to use Bluetooth Low Energy sniffer. You can passively capture data exchanges between two BLE devices, pushing the data into Wireshark, the open source network analysis tool, where you can visualize things on a packet level, with useful descriptors to help you make sense of the values without having to crack open the 2000 page Bluetooth 4.0 Core Specification every time.Plug it into your development machine, fire up the special sniffer bridge SW, select the device you want to sniff, and it will fire up Wireshark for you and start pushing data in via a live stream (using Nordic's Windows software), or save to a pcap file that you can analyze with Wireshark later. Please Note : You can only use this device to listen on Bluetooth Low Energy devices! It will not work on Bluetooth (classic) devices. The Nordic Wireshark-streaming sniffer software is currently Windows only. We have example code using the python API that will work on any OS to log the sniffed data to a pcap file for analysis so you can use this sniffer with any OS with python.The sniffer firmware cannot be used with the the Nordic DFU bootloader firmware, which means that if you want to reprogram this devices you must use a J-Link (and, likely, a SWD adapter + SWD Breakout ) You cannot over-the-air reprogram it. Check out our tutorial for more details and software downloads... -
Precio: $85,309.00
Adafruit Bluefruit LE UART Friend - Bluetooth Low Energy (BL
-Titulo Original : Adafruit Bluefruit LE UART Friend - Bluetooth Low Energy (BLE)-Fabricante : ADAFRUIT-Descripcion Original: Add bluetooth support to your project easily using this easy to use module from Adafruit // Download the free iOS and Android App by Adafruit to get started quickly // High quality module with custom firmware written by Adafruit. Having issues? This product is fully supported by Adafruit! // Full control over the device // Would you like to add powerful and easy-to-use Bluetooth Low Energy to your robot, art or other electronics project? Heck yeah! With BLE now included in modern smart phones and tablets, its fun to add wireless connectivity. So what you really need is the new Adafruit Bluefruit LE UART Friend! The Bluefruit LE UART Friend makes it easy to add Bluetooth Low Energy connectivity to anything with a hardware or software serial port. We even have nice hardware flow control so you won't have to think about losing data. Connect to your Arduino or other microcontroller or even just a standard FTDI cable for debugging and testing. This multi-function module can do quite a lot! For most people, they'll be very happy to use the standard Nordic UART RX/TX connection profile. In this profile, the Bluefruit acts as a data pipe, that can 'transparently' transmit back and forth from your iOS or Android device. You can use our iOS App or Android App, or write your own to communicate with the UART service. Download Adafruit's free Android/iOS app and you're ready to rock... -
Precio: $128,729.00
Adafruit Bluetooth / 802.15.1 Development Tools Feather M0 B
-Titulo Original : Bluetooth / 802.15.1 Development Tools Adafruit Feather M0 Bluefruit LE-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2995 // Stock Type: Development Boards >> Feather >> Boards // In Stock & Ready to Ship // Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.This is the Adafruit Feather M0 Bluefruit LE - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather M0 with a BTLE module, ready to rock! We have other boards in the Feather family, check'em out here. Bluetooth Low Energy is the hottest new low-power, 2.4GHz spectrum wireless protocol. In particular, its the only wireless protocol that you can use with iOS without needing special certification and it's supported by all modern smart phones. This makes it excellent for use in portable projects that will make use of an iOS or Android phone or tablet. It also is supported in Mac OS X and Windows 8+.At the Feather M0's heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero . This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip.To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. We also tied the battery thru a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge. Here's some handy specs! Like all Feather M0's you get: Measures 2.0 x 0.9... -
Precio: $84,829.00Expira: 06/04/2023
Adafruit Bluetooth 4.0 USB Module (v2.1 Back-Compatible) [AD
-Titulo Original : Adafruit Bluetooth 4.0 USB Module (v2.1 Back-Compatible) [ADA1327]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1327 // Stock Type: Wireless >> Bluetooth // In Stock & Ready to Ship // Add Bluetooth capability to your computer super fast with a USB BT 4.0 adapter. This adapter is backwards compatible with v2.1 and earlier, but also supports the latest v4.0/Bluetooth Low Energy. Inside lies a CSR8510 Bluetooth USB host. We've used this with great success on a Windows 7 computer, installing as a 'generic' Bluetooth device, but we expect it to work just fine with any modern computer as this chipset is very common. So far we've tested it to communicate with Bluetooth data modules only. Revision note: As of Friday, August 28th, 2015 these now have unique MAC addresses! That's great because now you don't have to worry about using two or more of them at once, handy for people turning these into beacons. Drivers for CSR Bluetooth modules are built into Windows XP/7/8/10 so you do not need to install any software or download anything: other bluetooth drivers or 'stacks' such as BlueSoleil are not as good as the Windows stack and will cause problems. Just plug it in and let windows auto-install the BT driver, it may take a few minutes! For Linux, use Bluez which works great, our Pi tutorial will be similar to your favorite distro Bluetooth 4.0 USB Module (v2.1 Back-Compatible) ( 3:32 ...
-
Precio: $27,639.00
Adafruit Breadboard-friendly Midi Jack (5-pin Din) [ada1134
-Titulo Original : Adafruit Breadboard-friendly MIDI Jack (5-pin DIN) [ADA1134]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1134 // Stock Type: Components & Parts >> Sockets/Connectors // In Stock & Ready to Ship // To celebrate the 30th Anniversary of the invention of MIDI we're carrying these handy 5-pin MIDI jacks. They're what you see on the back of nearly every synthesizer and drum machine. These are nice sturdy jacks, and breadboard-friendly, with all the pins on 0.1 spacing for easy wiring. This handy tutorial and wiring diagram will show you how to easily turn your Arduino into a MIDI controller! Also compatible with DINSYNC cables, if you have a really old drum machine... -
Precio: $106,159.00
Adafruit Circuit Playground Classic
-Titulo Original : Circuit Playground Classic-Fabricante : ADAFRUIT-Descripcion Original: Circuit Playground, featuring ATMega32U4 is designed to be used with Arduino IDE and code.org CS Discoveries // ATmega32u4 Processor, running at 3.3V and 8MHz. MicroUSB port for programming and debugging with Arduino IDE // The Circuit Playground has USB HID support, so it can act like a mouse or keyboard and attach directly to computers. // Green "ON" LED so you know its powered // Red "#13" LED for basic blinking // Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here - and it's the best way to practice programming on real hardware with no soldering or sewing required! This is the Classic version of Circuit Playground, which comes with an ATmega32u4. It's designed to be used with Arduino IDE and code.org CS Discoveries only. It even comes with Firmata already programmed in, so you can use it immediately with code.org Discoveries without any preparation or updates. If you would like to use MakeCode or CircuitPython, check out Circuit Playground Express, which can be used with MakeCode, CircuitPython or Arduino. Circuit Playground features an ATmega32u4 processor (3.3V @ 8MHz), just like our popular Flora. The board's also round and has alligator-clip pads around it so you don't have to solder or sew to make it work. You can power it from USB, a AAA battery pack, or with a Lipoly battery (for advanced users). Just program your code into the board then take it on the go! MicroUSB port for programming and debugging with Arduino IDE USB port can act like serial port, keyboard, mouse, joystick or MIDI Circuit Playground has built-in USB support. Built in USB means you plug it in to program it and it just shows up. All you really need is a Micro-B data/sync USB cable - not included! With the new 1.6.4+ Arduino IDE, it takes only a few seconds to add support. The Circuit Playground has USB HID support, so it can act like a mouse or keyboard and attach directly to computers. Features: 10 x mini NeoPixels, each one can display any color Motion sensor Temperature sensor Light sensor Sound sensor Mini speaker 2 x Push buttons Slide switch 8 x alligator-clip friendly input/output pins I2C, UART, and 4 pins that can do analog inputs/PWM output All 8 pads can act as capacitive touch inputs Reset butto... -
Precio: $46,309.00
Adafruit Colorful Square Tactile Button Switch Assortment -
-Titulo Original : Adafruit Colorful Square Tactile Button Switch Assortment - 15 Pack [ADA1010]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1010 // Stock Type: Components & Parts >> Switches // In Stock & Ready to Ship // Little clicky switches are standard input buttons on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial . The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. These buttons are bigger than the 6mm ones we carry, and come in a pack of 15. Each button comes with a candy-colored square cap that snaps on. You get three of each color-- blue, grey, yellow, green, and red. The square plastic button tops affix easily to the tactile switch body... -
Precio: $33,049.00
Adafruit Conductive Fiber - Stainless Steel 20um - 10 grams
-Titulo Original : Adafruit Conductive Fiber - Stainless Steel 20um - 10 grams [ADA1088]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1088 // Stock Type: Wearables >> Materials >> Other // In Stock & Ready to Ship // This conductive fiber is super interesting! It's great for felting and could also be spun into yarn if that's your thing. We tested many different fiber thicknesses for needle felting and found that this one (20um fiber thickness) is the most pleasurable to work with. Use about 0.2g of the stuff to make a felt touch button suitable for use with the MaKey MaKey or capacitive touch sensing circuit. Make felt controllers or felt buttons onto an existing wool sweater! You can also make a squeeze/pressure sensor with this fiber, as it becomes less resistive the more you squeeze the fibers together. Make sure to combine this fiber with a natural animal fiber (which have scales) for best results. We think 10g is the perfect amount and will get you through several projects. MaKey MaKey and alligator clips not included...
Mostrar del 73 al 96 (de 190 productos)