Arriba

Inicio » Catalogo » Electrónica, Audio y Video » Componentes Electrónicos > Semiconductores > Circuitos Integrados

Componentes Electrónicos > Semiconductores > Circuitos Integrados

Mostrar: 
Mostrar del 1 al 24 (de 229 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Adafruit Bluetooth 4.0 USB Module (v2.1 Back-Compatible) [AD
    Precio:  $10,229.00
    Agregar al Carrito   Vista

    Adafruit Bluetooth 4.0 USB Module (v2.1 Back-Compatible) [AD

    -Titulo Original : Adafruit Bluetooth 4.0 USB Module (v2.1 Back-Compatible) [ADA1327]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1327 // Stock Type: Wireless >> Bluetooth // In Stock & Ready to Ship // Add Bluetooth capability to your computer super fast with a USB BT 4.0 adapter. This adapter is backwards compatible with v2.1 and earlier, but also supports the latest v4.0/Bluetooth Low Energy. Inside lies a CSR8510 Bluetooth USB host. We've used this with great success on a Windows 7 computer, installing as a 'generic' Bluetooth device, but we expect it to work just fine with any modern computer as this chipset is very common. So far we've tested it to communicate with Bluetooth data modules only. Revision note: As of Friday, August 28th, 2015 these now have unique MAC addresses! That's great because now you don't have to worry about using two or more of them at once, handy for people turning these into beacons. Drivers for CSR Bluetooth modules are built into Windows XP/7/8/10 so you do not need to install any software or download anything: other bluetooth drivers or 'stacks' such as BlueSoleil are not as good as the Windows stack and will cause problems. Just plug it in and let windows auto-install the BT driver, it may take a few minutes! For Linux, use Bluez which works great, our Pi tutorial will be similar to your favorite distro Bluetooth 4.0 USB Module (v2.1 Back-Compatible) ( 3:32 ...
  • Adafruit 3692 Panel Mount 1/8 / 3.5mm TRS Audio Jack Connect
    Precio:  $5,069.00
    Expira: 04/10/2022
    Agregar al Carrito   Vista

    Adafruit 3692 Panel Mount 1/8 / 3.5mm TRS Audio Jack Connect

    -Titulo Original : Adafruit 3692 Panel Mount 1/8 / 3.5mm TRS Audio Jack Connector-Fabricante : Adafruit-Descripcion Original: Gold plated for superior connection // Ideal for chassis or panel mounting // Completely sealed jack, non-switching // Mounts in 1/4" hole in panels up to 0.075" thick, comes with matching hex-nut // Approximate dimensions: 7/8" long x 3/8" diameter // What is this TRS bit? Turtle Rock Studios? Transmission Raman Spectroscopy? Not quite, more like Tip-Ring-Sleeve. This nifty, gold-plated connector is known by many names, phone plug, phone jack, headphone jack, jack plug, etc. Used to transmit stereo audio signals, these connectors are a mainstay in audio equipment, especially speakers and microphones. For audio, tip is left channel, and ring is right channel, and the sleeve is ground. Each jack comes with a slim, gold-plated body with three contacts to solder to and a panel mounting hex-nut. TRS jack connectors don't have to be used only for audio! They make great general-purpose connectors where you need 2 or 3 signals and cheap, common cables. For example, in accessibility tech, these are often used to connect buttons or low voltage actuators...
  • Adafruit 8-channel Bi-directional Logic Level Converter [ad
    Precio:  $8,149.00
    Agregar al Carrito   Vista

    Adafruit 8-channel Bi-directional Logic Level Converter [ad

    -Titulo Original : Adafruit 8-Channel Bi-Directional Logic Level Converter [ADA395]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 395 // Stock Type: Breakout Boards >> Level Shifters & Expanders // In Stock & Ready to Ship // Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V. Although one can use resistors to make a divider, for high speed transfers, the resistors can add a lot of slew and cause havoc that is tough to debug. For that reason, we like using 4050/74LVX245 series and similar logic to perform proper level shifting. Only problem is that they are only good in one direction which can be a problem for some specialty bi-diectional interfaces and also makes wiring a little hairy. That's where this lovely chip, the TXB0108 bi-directional level converter comes in! This chip perform bidirectional level shifting from pretty much any voltage to any voltage and will auto-detect the direction . Only thing that doesn't work well with this chip is i2c (because it uses strong pullups which confuse auto-direction sensor). If you need to use pullups, you can but they should be at least 50K ohm - the ones internal to AVRs/Arduino are about 100K ohm so those are OK! Its a little more luxurious than a 74LVX245 but if you just don't want to worry about directional pins this is a life saver! Since this chip is a special bi-directional level shifter it does not have strong output pins that can drive LEDs or long cables, it's meant to sit on a breadboard between two logic chips! If you do not need instant bi-directional support, we suggest the 74LVX245 as below which has strong output drive. This breakout saves you from having to solder the very fine pitch packages that this chip comes with. We also add 0.1uF caps onto both sides and a 10K pull-up resistor on the output enable pin so you can use it right out of the box...
  • Adafruit 771 Accessories Waterproof 3xAA Battery Holder 1 Pi
    Precio:  $6,799.00
    Agregar al Carrito   Vista

    Adafruit 771 Accessories Waterproof 3xAA Battery Holder 1 Pi

    -Titulo Original : Adafruit Accessories Waterproof 3xAA Battery Holder (1 Piece)-Fabricante : Adafruit-Descripcion Original: Keep your power source safe and toasty in these waterproof 3xAA battery holders. They're just like classic switched battery holders, but designed for survival! The case has a rubber gasket around the edge of the case (its black and hard to see in the photos but it is there) and attaches together with 4 machine screws. What we like about this design is that the hexnuts are captive in one side and you can assemble/disassemble as many times as you need. There's a potted power switch and a rubber-boot on-off switch (press to turn on/off). Use with any alkaline or rechargeable batteries for about 4.5V output. Would work great with our waterproof DC power plugs (just use heatshrink to waterproof the solder connections) The power cable wires are not polarity marked, use any multimeter to verify the polarity during use. We also have a 2xAA version when you need a smaller & lighter bo...
  • Adafruit Mini Pan-Tilt Kit - Assembled with Micro Servos
    Precio:  $13,899.00
    Agregar al Carrito   Vista

    Adafruit Mini Pan-Tilt Kit - Assembled with Micro Servos

    -Titulo Original : Adafruit Mini Pan-Tilt Kit - Assembled with Micro Servos-Fabricante : ADAFRUIT-Descripcion Original: Service will take place at the customer's location // Removal of existing CPU from desktop // Installation of one customer-supplied CPU // Installing new drivers // Component test and cleanup // This fully-assembled pan-tilt kit is the perfect way to give your project full range motion with two micro servos. The pan-tilt can rotate roughly 180° from side-to-side and can tilt up&downwards around 150°. It also comes fully assembled with two Micro Servos (SG-90 or SG-92 type) included and a 38mm x 36mm space to mount a camera or sensor or whatever you like. Since the motors are plain, every-day analog servos, you can use any microcontroller or driver. They're good for beginners who want to make stuff move and the pan-tilt is an easy way to give whatever you're making both left-right and up-down motion. In our demo, we hooked this up with a Trinket Pro and made it do a little dance with the Arduino Servo library...
  • Adafruit 3403 Feather M0 Express - Designed For CircuitPytho
    Precio:  $14,389.00
    Agregar al Carrito   Vista

    Adafruit 3403 Feather M0 Express - Designed For CircuitPytho

    -Titulo Original : Adafruit (PID 3403 Feather M0 Express - Designed For CircuitPython - ATSAMD21 Cortex M0-Fabricante : Adafruit-Descripcion Original: ATSAMD21G18 ARM Cortex M0+ processor with 256K Flash and 32K RAM // CircuitPython is still in beta // Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in. 5 grams // 20 GPIO pins. Hardware Serial, hardware I2C, hardware SPI support. PWM outputs on all pins. 6 x 12-bit analog inputs. 1 x 10-bit analog ouput (DAC) // Comes fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE or for loading CircuitPython. We also toss in some header so you can solder it in and plug into a solderless breadboard. // CircuitPython is our beginner-oriented flavor of MicroPython - and as the name hints at, its a small but full-featured version of the popular Python programming language specifically for use with circuitry and electronics. Please note, CircuitPython is still in beta and we're working hard to make it awesome! Please pick up one of these Feather M0 Expresses if you want to try it out - maybe even help us find bugs and make improvements! That doesn't mean you cant also use it with Arduino IDE! At the Feather M0's heart is an ATSAMD21G18 ARM Cortex M0+ processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. Here's some handy specs! ATSAMD21G18 @ 48MHz with 3.3V logic/power 256KB of FLASH + 32KB of RAM. No EEPROM 32.768 KHz crystal for clock generation & RTC 3.3V regulator with 500mA peak current output USB native support, comes with USB bootloader and serial port debugging Built in 100mA lipoly charger with charging status indicator LED Pin #13 red LED for general purpose blinking Power/enable pin 4 mounting holes Reset button The Feather M0 Express uses the extra space left over to add a Mini NeoPixel, 2 MB SPI Flash storage and a little prototyping space. You can use the SPI Flash storage like a very tiny hard drive. When used in CircuitPython, the 2 MB flash acts as storage for all your scripts, libraries and files. When used in Arduino, you can read/write files to it, like a little datalogger or SD card, and then with our helper program, access the files over USB...
  • Adafruit Green 7-segment clock display - 0.56 digit height [
    Precio:  $7,179.00
    Agregar al Carrito   Vista

    Adafruit Green 7-segment clock display - 0.56 digit height [

    -Titulo Original : Adafruit Green 7-segment clock display - 0.56 digit height [ADA813]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 813 // Stock Type: LEDs >> Segmented // In Stock & Ready to Ship // Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal points on each digit and an extra wire for colon-dots in the center (good for time-based projects). These are ultra bright 125mcd! You can drive these with less current to get the same brightness to save power, or crank them up to 20mA and have them really bright. These displays are multiplexed, common-cathode. What that means it that you can use a 74HC595 or just 8 microcontroller pins if you can spare them to control the 8 anodes (7-seg + decimal) at about ~15mA each, and then connect NPN transistors or a TPIC6B595 to the cathodes to sink the 8*20mA = ~120mA maximum per digit. These come in a bright green color, we also have many other sizes and colors...
  • Adafruit FONA - Mini Cellular GSM Breakout - SMA Version [AD
    Precio:  $27,589.00
    Agregar al Carrito   Vista

    Adafruit FONA - Mini Cellular GSM Breakout - SMA Version [AD

    -Titulo Original : Adafruit FONA - Mini Cellular GSM Breakout - SMA Version [ADA1963]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1963 // Stock Type: Wireless >> Cellular // In Stock & Ready to Ship // Ring, Ring! Who's that callin'? It's your breadboard! Introducing Adafruit FONA MiniGSM, an adorable all-in-one cellular phone module that lets you add voice, text, SMS and data to your project in an adorable little package. This module measures only 1.75x1.25 but packs a surprising amount of technology into its little frame. At the heart is a GSM cellular module (we use the latest SIM800) the size of a postage stamp. This module can do just about everything. This version has an SMA connector. For the uFL version, click here! Quad-band 850/900/1800/1900MHz - connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested)Make and receive voice calls using a headset OR an external 8Ω speaker + electret microphoneSend and receive SMS messagesSend and receive GPRS data (TCP/IP, HTTP, etc.)Scan and receive FM radio broadcasts (yeah, we don't exactly know why this was included but it works really well)PWM/Buzzer vibrational motor controlAT command interface with auto baud detectionSounds delicious, right? So we plated this fine module onto a little breakout with all the extras you need to make your next project shineOnboard LiPoly battery charging circuitry so you can take your project on the go. Use any 500mAh+ LiPoly or LiIon battery and recharge over the MicroUSB when necessary. Two LEDs let you know when its charging and doneStandard 4-pole TRRS headphone jack. Use any 'Android' or 'iPhone'-compatible headset with micBreakouts for external 8Ω speaker and electret mic if you don't want to use a headphoneLevel shifting circuitry so you can run it with 2.8V to 5V logic.Vibrational motor (buzzer) driver so you can have noiseless notificationsSMA connection for external antennaIndicator LEDs for power and network connectivity Standard SIM slides into the bac...
  • Adafruit 2748 ALS-PT19 Analog Light Sensor Breakout ADA2748
    Precio:  $4,939.00
    Expira: 10/04/2022
    Agregar al Carrito   Vista

    Adafruit 2748 ALS-PT19 Analog Light Sensor Breakout ADA2748

    -Titulo Original : Adafruit ALS-PT19 Analog Light Sensor Breakout [ADA2748]-Fabricante : Adafruit-Descripcion Original: Add a teeny analog light sensor, the ALS PT19 analog light sensor is a great way to upgrade a project that uses a photocell and needs RoHS compliance. Due to the high rejection ratio of infrared radiation, the spectral response of the ambient light sensor is close to that of human eyes. It's a pretty simple sensor - connect - to ground, + to 2.5V-5.5V or so to power it. Now measure the analog voltage on the OUT pin. That's it! The voltage will increase when the sensor detects more light...
  • Adafruit Trinket M0 - for use with CircuitPython & Arduino I
    Precio:  $8,129.00
    Agregar al Carrito   Vista

    Adafruit Trinket M0 - for use with CircuitPython & Arduino I

    -Titulo Original : Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE-Fabricante : ADAFRUIT-Descripcion Original: Same size, form-factor, and pinout as classic Trinket // ATSAMD21E18 32-bit Cortex M0+, 48 MHz processor, 6x as fast as original Trinket! // 256KB Flash - 32x as much as 8 KB on ATtiny85 // 32 KB RAM - 64x as much as 512 bytes on ATtiny85 // Header pins require soldering // The Adafruit Trinket M0 is a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot of power. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's Adafruit's lowest-cost CircuitPython programmable board! It is the same form factor as the original ATtiny85-based Trinket. The Trinket M0 has swapped out the lightweight ATtiny85 for a ATSAMD21E18 powerhouse. It's just as small, and it's easier to use, so you can do more. The most exciting part of the Trinket M0 is that while you can use it with the Arduino IDE, it is shipped with CircuitPython on board. When you plug it in, it will show up as a very small disk drive with main.py on it. Edit main.py with your favorite text editor to build your project using Python, the most popular programming language. No installs, IDE or compiler needed, so you can use it on any computer, even ChromeBooks or computers you can't install software on. When you're done, unplug the Trinket M0 and your code will go with you. Five GPIO pins with digital input/output with internally connected pullups or pulldowns Three of the I/O pins can be used for 12-bit analog input True analog output on one I/O pin - can be used to play 10-bit quality audio clip...
  • Adafruit Pro Trinket 5v 16mhz (1 Unidad)
    Precio:  $8,279.00
    Agregar al Carrito   Vista

    Adafruit Pro Trinket 5v 16mhz (1 Unidad)

    -Titulo Original : Adafruit Pro Trinket 5V 16MHz (1 Piece)-Fabricante : Adafruit -Descripcion Original: Chip integrado ATmega328P en paquete QFN Velocidad de reloj de 16MHz, FLASH de 28K disponible El cargador de arranque USB con un buen indicador LED se parece a un USBtinyISP para que pueda programarlo con AVRdude y / o Arduino IDE (con algunas modificaciones simples de configuración). También tiene encabezados para un puerto FTDI para reprogramación Conector micro-USB para alimentación y / o carga USB, puede colocarlo en una caja o pegarlo con cinta adhesiva y usar cualquier cable USB para cuando desee reprogramar. Regulador de potencia incorporado de 5.0V con capacidad de salida de 150mA y caída ultra baja. Entrada de hasta 16 V, protección de polaridad inversa, protección térmica y de límite de corriente. Trinket tiene una hermana mayor en la ciudad: ¡Pro Trinket 5V! Pro Trinket combina todo lo que te gusta de Trinket con la familiaridad del chip Arduino de núcleo común, el ATmega328. Es como un Arduino Pro Mini con más pines y USB, tan delicioso. Trinket ya tiene un año, y aunque ha sido genial ver toneladas de pequeños proyectos, a veces solo necesitas más pines, más FLASH y más RAM. Es por eso que diseñamos Pro Trinket, con 18 GPIO, 2 entradas analógicas adicionales, 28K de flash y 2K de RAM. Al igual que el Trinket, tiene soporte de carga de arranque USB integrado: esta vez optamos por un conector MicroUSB. También agregamos el soporte Optiboot, para que pueda programar su Pro Trinket a través de USB o con un cable FTDI al igual que el Pro Mini y sus amigos. El Pro Trinket PCB mide solo 1.5 x 0.7 x 0.2 (sin encabezados) pero tiene casi la misma capacidad que un Arduino UNO. Por lo tanto, es excelente una vez que haya terminado un prototipo en un Arduino UNO oficial y quiera hacer el proyecto es más pequeño. El Pro Trinket 5V usa el chip Atmega328P, que es el mismo chip central en el Arduino UNO / Duemilanove / Mini / etc. a la misma velocidad y voltaje. Por lo tanto, le alegrará saber que no solo es Pro Trinket programable usando el IDE de Arduino como ya configuró, ¡pero el 99% de los proyectos de Arduino funcionarán de inmediato! Aquí hay algunas cosas que debe tener en cuenta al adaptar los bocetos de Arduino: los pines # 2 y # 7 no están disponibles (están exclusivamente para USB) El regulador de 5 V integrado puede proporcionar una salida de 150 mA, no una salida de 800 mA. No puede enchufar los protectores directamente en Pro Trinket. No hay un chip de serie a USB integrado. Esto es para mantener el Pro Trinket pequeño y económico, puede usar cualquier cable FTDI para conectar al puerto FTDI para una conexión en serie. nnection es solo para cargar código nuevo. El gestor de arranque en Pro Trinket usa 4KB de FLASH, por lo que el tamaño máximo de boceto es de 28,672 bytes. El gestor de arranque no afecta el uso de RAM...
  • Adafruit Resistive Touch Screen to USB Mouse Controller - AR
    Precio:  $11,069.00
    Agregar al Carrito   Vista

    Adafruit Resistive Touch Screen to USB Mouse Controller - AR

    -Titulo Original : Adafruit Resistive Touch Screen to USB Mouse Controller - AR1100-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1580 // Stock Type: Breakout Boards >> Touch // In Stock & Ready to Ship // Getting touchy performance with your screen's touch screen? Resistive touch screens are incredibly popular as overlays to TFT and LCD displays. If you want to connect one to a computer you need something to handle the analog to digital conversion. Most converters we've found are not very easy to use, and are 'fixed' - making them difficult to calibrate. The AR1100 is a nice chip that solves this problem by acting as a touch->USB converter and also comes with calibration software. The calibration software is Windows only, but once you've calibrated you can use the screen on any OS. The AR1100 shows up as a regular Mouse or Digitizer HID device so no drivers are required. We've tested it sucessfully on Mac, Windows, and Debian Linux (Raspbian on a Raspberry Pi). Other Linux distributions may or may not work, but if you're running Linux you're probably used to that.This breakout board features the AR1100, which has both USB and UART interfaces available. 99% of the time, you'll want to use the USB interface but there is some functionality for getting TTL UART data out (see the datasheet for details) There is also a red LED that lights up to indicate when a touch has been detected. For the screens that have 1mm pitch FPC cables, you can plug the cable right into the connector. The majority of medium/large touchscreens have that kind of connector. If you have another kind of touch screen, the four X/Y contacts are available on 0.1 pitch breakouts so you can hand-solder or wire them. We set this breakout up for 4-wire sensing only. You can pretty much just plug and play to get started, for more details including calibration software, check out the AR1100 page . Plug any 1mm-pitch 4-wire resistive touchscreen to the on-board FPC connector, when you plug into a computer's USB port you should see a new device and touching the screen will cause the mouse cursor to move around...
  • Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2 (3
    Precio:  $15,699.00
    Agregar al Carrito   Vista

    Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2 (3

    -Titulo Original : Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2 (3709)-Fabricante : ADAFRUIT-Descripcion Original: fully integrated MOX gas sensor // output signals with a typical accuracy of 15% // This part will measure eCO2 // Breathe easy with the SGP30 Multi-Pixel Gas Sensor, a fully integrated MOX gas sensor. This is a very fine air quality sensor from the sensor experts at Sensirion, with I2C interfacing and fully calibrated output signals with a typical accuracy of 15% within measured values. The SGP combines multiple metal-oxide sensing elements on one chip to provide more detailed air quality signals. This is a gas sensor that can detect a wide range of Volatile Organic Compounds (VOCs) and H2 and is intended for indoor air quality monitoring. When connected to your microcontroller (running our library code) it will return a Total Volatile Organic Compound (TVOC) reading and an equivalent carbon dioxide reading (eCO2) over I2C. The SGP30 has a 'standard' hot-plate MOX sensor, as well as a small microcontroller that controls power to the plate, reads the analog voltage, tracks the baseline calibration, calculates TVOC and eCO2 values, and provides an I2C interface to read from. Unlike the CCS811, this sensor does not require I2C clock stretching. This part will measure eCO2 (equivalent calculated carbon-dioxide) concentration within a range of 0 to 60,000 parts per million (ppm), and TVOC (Total Volatile Organic Compound) concentration within a range of 0 to 60,000 parts per billion (ppb). Please note, this sensor, like all VOC/gas sensors, has variability and to get precise measurements you will want to calibrate it against known sources! That said, for general environmental sensors, it will give you a good idea of trends and comparison. The SGP30 does have built in calibration capabilities, note that eCO2 is calculated based on H2 concentration, it is not a 'true' CO2 sensor for laboratory use. Another nice element to this sensor is the ability to set humidity compensation for better accuracy. An external humidity sensor is required and then the RH% is written over I2C to the sensor, so it can better calculate the TVOC/eCO2 values...
  • Adafruit 1699 Accessories Breadboard-Friendly 3.5mm Stereo H
    Precio:  $4,229.00
    Expira: 20/11/2022
    Agregar al Carrito   Vista

    Adafruit 1699 Accessories Breadboard-Friendly 3.5mm Stereo H

    -Titulo Original : Adafruit Accessories Breadboard-Friendly 3.5mm Stereo Headphone Jack (1 Piece)-Fabricante : Adafruit-Descripcion Original: Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. // It's a stereo jack with disconnect-switches on Left and Right channels as well as a center ground pin. // ou can use any 3.5mm stereo cable with this jack. The pins are on 0.1" spacing so it plugs very solidly into a breadboard, perma-proto or perf-board. // Each order comes with one headphone jack, breadboard and audio cable not included! // Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. It's a stereo jack with disconnect-switches on Left and Right channels as well as a center ground pin. You can use any 3.5mm stereo cable with this jack. The pins are on 0.1 spacing so it plugs very solidly into a breadboard, perma-proto or perf-board. Each order comes with one headphone jack, breadboard and audio cable not included...
  • Adafruit Mini Thermal Receipt Printer [ADA597]
    Precio:  $29,199.00
    Agregar al Carrito   Vista

    Adafruit Mini Thermal Receipt Printer [ADA597]

    -Titulo Original : Adafruit Mini Thermal Receipt Printer [ADA597]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 597 // Stock Type: Components & Parts >> Thermal Printing // In Stock & Ready to Ship // Add a mini printer to any microcontroller project with this very cute thermal printer. Thermal printers are also known as receipt printers, they're what you get when you go to the ATM or grocery store. Now you can embed a little printer of your own into an enclosure. This printer is ideal for interfacing with a microcontroller, you simply need a 3.3V-5V TTL serial output from your microcontroller to print text, barcodes, bitmap graphics, even a QR code! This package comes with a thermal printer including the print head (it does not require ink, a set of power and data cables, and two plastic shims for panel mounting. Thermal paper not included! The printer uses very common 2.25 wide thermal paper , available in any office or stationery supply store. It can fit up to 50 ft of paper in the bay at once. You will also need a 5 to 9VDC regulated power supply, that can provide 1.5A or more during the high-current print - our 5V 2A power supply will work very nicely . We also suggest picking up a roll or two of 50' long thermal paper , and also a 2.1mm jack terminal block adapter which will make it easy to connect the power adapter. We really like this printer because its easy to make Bold, underline , inverted text , variable line spacing, left/center/right justification, barcodes in 11 standard formats with adjustable height, and even custom bitmap graphics. Of course, we wouldn't leave you with a datasheet and a good luck! - We have a full tutorial and matching Arduino library that demonstrates the following: Printing with small, medium and large text Bold and underline text Inverted text Variable line spacingLeft, center and right justificationBarcodes in the following standard formats: UPC A, UPC E, ...
  • Adafruit USB Mini-B Breakout Board [ADA1764]
    Precio:  $3,689.00
    Agregar al Carrito   Vista

    Adafruit USB Mini-B Breakout Board [ADA1764]

    -Titulo Original : Adafruit USB Mini-B Breakout Board [ADA1764]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1764 // Stock Type: Breakout Boards >> Batteries/Power // In Stock & Ready to Ship // Simple but effective - this breakout board has a USB Mini-B connector, with all 5 pins broken out. Great for pairing with a microcontroller with USB support, or adding USB 5V power to a project. Comes with one fully assembled and tested mini B breakout PCB and a small stick of 0.1 header so you can solder it on and plug into a breadboard...
  • Adafruit (1095 Keyfob 4 Button RF Remote Control - 315MHz
    Precio:  $5,749.00
    Agregar al Carrito   Vista

    Adafruit (1095 Keyfob 4 Button RF Remote Control - 315MHz

    -Titulo Original : Adafruit (1095 Keyfob 4 Button RF Remote Control - 315MHz-Fabricante : ADAFRUIT-Descripcion Original: Weight: 21.22g // Uses two CR2016 coin cells // A matching RF receiver is not included // This 4-button keyfob remote goes with our three basic 315MHz RF receiver modules. // This 4-button keyfob remote goes with our three basic 315MHz RF receiver modules. It will work with all of them, sending out one of four commands that match up with the four outputs. Its small and light weight and will work up to 25 feet away depending on line-of-sight and obstructions. Since this is just a transmitter, if you have multiple receivers, it will turn all of them on and off at the same time (there is no sub-addressing) A matching RF receiver is not included, you'll need to purchase one in addition...
  • Caja para 3 pilas AAA con On/off Switch pack 1
    Precio:  $4,989.00
    Agregar al Carrito   Vista

    Caja para 3 pilas AAA con On/off Switch pack 1

    -Titulo Original : Adafruit Accessories 3xAAA Battery Holder W/ On/Off Switch (1 Piece)-Fabricante : Adafruit-Descripcion Original: Interruptor encendido / apagado - Úselo con cualquier batería alcalina o recargable para una salida de aproximadamente 4.5V - Conecta 3 pilas AAA - Ideal para proyectos de 3.3...
  • Adafruit Colorful Square Tactile Button Switch Assortment -
    Precio:  $7,729.00
    Agregar al Carrito   Vista

    Adafruit Colorful Square Tactile Button Switch Assortment -

    -Titulo Original : Adafruit Colorful Square Tactile Button Switch Assortment - 15 Pack [ADA1010]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1010 // Stock Type: Components & Parts >> Switches // In Stock & Ready to Ship // Little clicky switches are standard input buttons on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial . The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. These buttons are bigger than the 6mm ones we carry, and come in a pack of 15. Each button comes with a candy-colored square cap that snaps on. You get three of each color-- blue, grey, yellow, green, and red. The square plastic button tops affix easily to the tactile switch body...
  • Adafruit 4173 Short Male Header Kit For ItsyBitsy
    Precio:  $5,459.00
    Expira: 19/03/2023
    Agregar al Carrito   Vista

    Adafruit 4173 Short Male Header Kit For ItsyBitsy

    -Titulo Original : Adafruit 4173 Short Male Header Kit For ItsyBitsy-Fabricante : Adafruit-Descripcion Original: Short Male Headers // Kit includes two 14-pin and one 5-pin header. // These three Short Male Headers alone are, well, lonely. But pair them with our ItsyBitsy boards, and you're in business! These headers are particularly cute and tiny and are designed to match perfectly with our shorty female header kit for ItsyBitsy. Note that you could use normal header with those headers, but these are short and don't need clipping. Note: Kit includes two 14-pin and one 5-pin header. ItsyBitsy not included. Doesn't come with the matching female headers, you'll want a set of those too...
  • Adafruit Pro Trinket Liion/lipoly Backpack Add-on
    Precio:  $6,399.00
    Agregar al Carrito   Vista

    Adafruit Pro Trinket Liion/lipoly Backpack Add-on

    -Titulo Original : Adafruit Pro Trinket LiIon/LiPoly Backpack Add-On-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2124 // Stock Type: Power >> LiIon & LiPoly >> Accessories // In Stock & Ready to Ship // If you have a Pro Trinket you probably know it's the perfect little size for a portable project. This LiPoly backpack makes it really easy to do! Instead of wiring 2 or 3 boards together to make a charging system, this little PCB sits on top of the Pro Trinket and allows a LiPoly/LiIon battery to plug in. When the Pro Trinket USB port is powered, the battery is recharged automatically. Unplug the USB port and the Pro Trinket will switch over to the rechargeable battery.Ideally, this backpack is for use with the 3.3V Pro Trinket, so that the battery voltage (3.7V-4.2V) will get regulated down to 3.3V on the Pro Trinket board. However, many times, you can run a 5V Pro Trinket + accessories off of the ~4V from the LiPoly battery with no problem. (Technically its overclocking but we've never seen that affect the Pro Trinket itself, AVRs are happy to overclock without complaint).Solder the backpack on with the extra long header so that it can still plug into a breadboard, or clip the long header leads short afterwards for a slim package. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Seriously, it could not get more easy.If you want to add an On/Off switch, we also made that really easy. The two 0.1 holes with a box around them are the battery output line. Carefully cut the trace between them with a hobby knife and replace with two wires from a switch like this slide switch , or this pushbutton one , for example. Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up. The charge current is 100mA by default, so it will work with any size battery and USB port. If you want you can easily change it over to 500mA mode by soldering closed the jumper on the bottom, for when you'l...
  • Adafruit 4279 Ultimate GPS With USB - 66 Channel W/10 Hz Upd
    Precio:  $28,929.00
    Expira: 21/03/2023
    Agregar al Carrito   Vista

    Adafruit 4279 Ultimate GPS With USB - 66 Channel W/10 Hz Upd

    -Titulo Original : Adafruit 4279 Ultimate GPS With USB - 66 Channel W/10 Hz Updates-Fabricante : Adafruit-Descripcion Original: The Bluefruit can also act like an HID Keyboard (for devices that support BLE HID) // Can become a BLE Heart Rate Monitor (a standard profile for BLE) - you just need to add the pulse-detection circuitry // Turn it into a UriBeacon, the Google standard for Bluetooth LE beacons. Just power it and the 'Friend will bleep out a URL to any nearby devices with the UriBeacon app installed. // Built in over-the-air bootloading capability so we can keep you updated with the hottest new firmware. Use any Android or iOS device to get updates and install them! // Add powerful and easy-to-use Bluetooth Low Energy to your robot, art or other electronics project! With BLE now included in modern smart phones and tablets, its fun to add wireless connectivity. So what you really need is the new Adafruit Bluefruit LE SPI Friend! The Bluefruit LE SPI Friend makes it easy to add Bluetooth Low Energy connectivity to anything with 4 or 5 GPIO pins. With SPI, you don't have to worry about baud rates, flow control, or giving up a hardware UART port. Connect to your Arduino or other microcontroller using the common four-pin SPI interface (MISO, MOSI, SCK and CS) plus a 5th GPIO pin for interrupts (to let the Arduino know when data or a response is ready). This multi-function module can do quite a lot! For most people, they'll be very happy to use the standard Nordic UART RX/TX connection profile. In this profile, the Bluefruit acts as a data pipe, that can 'transparently' transmit back and forth from your iOS or Android device. You can use Adafruit's iOS App or Android App, or write your own to communicate with the UART service. If you like Serial communication more than SPI, we also have a version that can talk UART The board is capable of much more than just sending strings over the air! Thanks to an easy to learn AT command set, you have full control over how the device behaves, including the ability to define and manipulate your own GATT Services and Characteristics, or change the way that the device advertises itself for other Bluetooth Low Energy devices to see. You can also use the AT commands to query the die temperature, check the battery voltage, and more, check the connection RSSI or MAC address, and tons more. Really, way too long to list here...
  • Adafruit Vibrating Mini Motor Disc [ADA1201]
    Precio:  $4,859.00
    Agregar al Carrito   Vista

    Adafruit Vibrating Mini Motor Disc [ADA1201]

    -Titulo Original : Adafruit Vibrating Mini Motor Disc [ADA1201]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1201 // Stock Type: Robotics & CNC >> Robotics // In Stock & Ready to Ship // *BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs, completely sealed up so they're easy to use and embed. Two wires are used to control/power the vibe. Simply provide power from a battery or microcontroller pin (red is positive, blue is negative) and it will buzz away. Works from 2V up to 5V, higher voltages result in more current draw but also a stronger vibration. If you want to reduce the current draw/strength (for example, to control it directly from an Arduino pin) try putting a resistor (100 to 1000 ohms) in series. For full power control, a small PN2222 transistor can control a motor easily, some experimentation may be required! Vibrating Mini Motor Disc ( 6:47 ...
  • DemkoVIbe Pickleball Set - 2 USAPA Approved DK1 Pickleball P
    Precio:  $47,339.00
    Agregar al Carrito   Vista

    DemkoVIbe Pickleball Set - 2 USAPA Approved DK1 Pickleball P

    -Titulo Original : DemkoVIbe Pickleball Set - 2 USAPA Approved DK1 Pickleball Paddles with Polymer Honeycomb Core & Carbon Fiber Surface with 4 USAPA Regulation Pickleballs & Strong Light Weight Carry Bag-Fabricante : DemkoVIbe-Descripcion Original: 7 PIECE BUNDLE – Take on opponents with this complete pickleball set. Every item in this package has been constructed to allow you to compete and win at the highest level. The package includes 2 USAPA approved polymer honeycomb core pickleball paddles with carbon fiber surfaces, 4 USAPA regulation pickleballs, and a convenient carry bag to keep your paddles and balls organized. // SUPERIOR PADDLE DESIGN – The paddles feature the highest quality polymer honeycomb core and carbon fiber face giving you unmatched feel and control which will benefit your soft game without sacrificing power. Premium materials make it strong yet lightweight. The honeycomb core and carbon fiber surface keeps the paddle durable and long lasting. The 7.7 inch wide face means the paddle has a large sweet spot. This give you a great chance of hitting winning shots and controlling the ball. // COMFORTABLE HANDLE – The 4.9 inch handle is designed to dampen vibration for optimal control and precision play. It also has a 4.1 inch grip circumference for additional comfort feeling great in the hand whether you are a beginner or an experienced professional. // REGULATION PICKLEBALLS – Included pickleballs are USAPA grade with a 75mm diameter. They have 40 holes with 16 small and 24 large making them ideal for casual matches and tournament play. Each ball weighs 27 grams. // ALL IN ONE SET – Pickleball is lots of fun while being easier on the body. Whether you're thinking about trying pickleball or are an experienced player, this set offers a superior design and superb quality you will need to compete. //...
Mostrar del 1 al 24 (de 229 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
Destacados
Revisar todos destacados

Información

Información

Nuestras ofertas

Nuestras ofertas

Su cuenta

Su cuenta

Mantente conectado

Mantente conectado

Contáctenos

Contáctenos

elbazardigital.com   © 2023