289,183 ventas concretadas desde abril 2017.
011-3221-3652 
+54-911-2290-6553
Componentes Electrónicos > Semiconductores > Circuitos Integrados
-
Precio: $46,459.00 -
Expira:
16/01/2024Precio: $32,809.00 -
Precio: $70,539.00 -
Precio: $46,919.00
-
Expira:
04/01/2023Precio: $27,389.00 -
Precio: $121,059.00 -
Precio: $70,289.00 -
Expira:
10/08/2023Precio: $34,299.00
-
Precio: $47,919.00 -
Expira:
18/11/2021Precio: $57,349.00 -
Precio: $33,049.00 -
Precio: $46,669.00
-
Precio: $72,299.00 -
Precio: $114,629.00 -
![Adafruit 12mm Coin Cell Breakout w/On-Off Switch [ADA1867]](https://images-na.ssl-images-amazon.com/images/I/61DCRpysyvL.jpg "Adafruit 12mm Coin Cell Breakout w/On-Off Switch [ADA1867]")
Expira:
16/01/2022Precio: $38,309.00 -
![Adafruit Small Enclosed Piezo w/Wires [ADA1740]](https://images-na.ssl-images-amazon.com/images/I/51KIFAjRG0L.jpg "Adafruit Small Enclosed Piezo w/Wires [ADA1740]")
Expira:
08/09/2023Precio: $25,019.00
-
Expira:
04/04/2021Precio: $69,639.00 -
Precio: $94,989.00 -
Precio: $94,989.00 -
Precio: $105,229.00
-
Precio: $41,929.00 -
Precio: $38,959.00 -
Precio: $50,089.00 -
Precio: $114,189.00
-
Precio: $46,459.00
Adafruit Assembled Pi Cobbler Plus - Breakout Cable - for Pi
-Titulo Original : Adafruit Assembled Pi Cobbler Plus - Breakout Cable - for Pi B+/A+/Pi 2/Pi 3-Fabricante : ADAFRUIT-Descripcion Original: - //... -
Precio: $32,809.00Expira: 16/01/2024
Adafruit Premium Female/Male 'Extension' Jumper Wires - 20 x
-Titulo Original : Adafruit Premium Female/Male 'Extension' Jumper Wires - 20 x 3 [ADA1953]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1953 // Stock Type: Prototyping >> Jumper Wiring >> Female/Male // In Stock & Ready to Ship // These Female/Male 'extension' jumper wires for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3 (75mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbow colors). They have 0.1 male header contacts on one end and 0.1 female header contacts on the other. They fit cleanly next to each other on standard-pitch 0.1 (2.54mm) header. The best part is they come in a 20-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses. We have tons of different Jumper Wires available, in all shapes and sizes! The length of the jumper wires is sometimes a bit longer than what is listed. For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than 0.... -
Precio: $70,539.00
Cable lcd For Dell G3 3500 G5 5500 G5 5505 01f2kr 1f2kr
-Titulo Original : Suyitai LCD LVDS LED EDP 144Hz 40PIN Ribbon Video Screen Video Display Cable Wire Line Replacement For Dell G3 3500 G5 5500 G5 5505 01F2KR 1F2KR 450.0K702.0001-Fabricante : Suyitai-Descripcion Original: - Solo necesita el precio razonable, puede obtener un juego de ajedrez hecho de madera real. Nuestros productos también son respetuosos con el medio ambiente, por lo que no se tiñen con ningún proceso químico y tienen un alto nivel de seguridad. - A y A es actualmente el escaso ajedrez del mercado que cumple con las dimensiones estándar. 15 incrustaciones de tablero con cuadrados de 1,65 (fresno europeo/arce), mientras se equipa con piezas Staunton de 3 king y 1,15 de diámetro de base. (el rey mide el doble de la altura de los cuadrados y el diámetro de la base es el 75 por ciento de los cuadrados). - El uso de piezas premium de triple peso brinda comodidad y tranquilidad al usar la tabla, al mismo tiempo que hace que sea menos probable que se vuelque. La almohadilla de vellón en la parte inferior de la pieza de ajedrez protege la superficie del tablero y mejora la resistencia al deslizamiento. El diseño del cajón mantiene el polvo fuera de las piezas de ajedrez y permite un fácil almacenamiento. - Tanto la practicidad como la estética, nuestro juego de ajedrez, pero también tiene una mano de obra meticulosa y detalles sorprendentes, no solo es una colección, sino también una opción perfecta para regalos navideños... -
Precio: $46,919.00
Adafruit Mini Lipo w/Mini-B USB Jack - USB LiIon/LiPoly Char
-Titulo Original : Adafruit Mini Lipo w/Mini-B USB Jack - USB LiIon/LiPoly Charger - v1-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1905 // Stock Type: Power >> LiIon & LiPoly >> Chargers // In Stock & Ready to Ship // Adafruit Mini Lipo w/Mini-B USB Jack - USB LiIon/LiPoly charger - v1 Adafruit Product ID: 1905. Battery not included...
-
Precio: $27,389.00Expira: 04/01/2023
Adafruit 1935Wired Miniature Electret Microphone ADA1935
-Titulo Original : Adafruit Wired Miniature Electret Microphone [ADA1935]-Fabricante : Adafruit-Descripcion Original: That's one tiny microphone! At about the size of a mature aphid, this wired Electret Microphone is perfect for your FONA. This microphone's very similar to our PCB-mount Elecret Microphone but is significantly smaller and has pre-attached 65mm long wires. We don't have a specific datasheet for it but it can be biased with 2V and 2K impedence. You do need an electret microphone amplifier to boost the millivolt-signal up to line level. The FONA has this amplifier part built into it but something like an Arduino does not. We tested it with the FONA and it works great for voice purposes, you may also be able to use it with our other microphone amplifiers (like #1713 and #1063) and if you desolder the onboard microphones... -
Precio: $121,059.00
Adafruit 1559 Flora RGB Smart NeoPixel Version 2 - Sheet Of
-Titulo Original : Adafruit Flora RGB Smart NeoPixel Version 2 - Sheet Of 20-Fabricante : Adafruit-Descripcion Original: Designed specifically for wearables // Ultra-bright LEDs with a constant-current driver // Easy to sew and can be daisy-chained // Item Package Quantity: 1 //... -
Precio: $70,289.00
Adafruit Power Management IC Development Tools Precision LM4
-Titulo Original : Adafruit Power Management IC Development Tools Precision LM4040 Voltage Reference Breakout - 2.048V and 4.096V (1 Piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2200 // Stock Type: Breakout Boards >> Batteries/Power // In Stock & Ready to Ship // How good is your multimeter really ? Or maybe your analog converter needs a good reference? Or lets say you want to test your microcontroller's conversion accuracy & precision. If only you had a dependable, high precision, rock-solid voltage reference. Now you know why we made this very cute and useful little breakout board. It has two very high precision shunt-type voltage references with 750 ohm biasing resistors. One is 2.048V (great for 3.3V reference systems) and the other is 4.096 (great for 5V). Both are 0.1% accuracy!Using is easy, just power with about 5V-12V, or 3V if you want only the 2V reference to work. Then measure the voltage on the output. Note that these are not regulators - you can't power anything off the output. They are for measurements only. For more details, check the LM4040 Datasheet for more information... -
Precio: $34,299.00Expira: 10/08/2023
Adafruit 2136 2.54mm/0.1 Pitch Terminal Block - 3-pin
-Titulo Original : Adafruit 2136 2.54mm/0.1 Pitch Terminal Block - 3-pin-Fabricante : Adafruit-Descripcion Original: Dimensions (w/o pins): 9mm x 8mm x 6mm / 0.4" x 0.3" x 0.2" // Pin Length: 3mm / 0.1" // Weight: 0.8g // Wire gauge: 26-20AWG // Distance btwn terminal blocks: 2.5mm // After a long day out harvesting in the terminal block fields, we've returned with a veritable bounty of these very nice and compact 2.54mm/0.1 terminal blocks in a variety of sizes. Our harvest of terminal blocks is great news since nothing makes a project harder to maintain than a lot of loose wiring. That's why we like to use terminal blocks whenever making PCB-to-wire connections. These are 2.54mm spaced blocks so they fit easily into perf or protoboards. They don't fit well into solderless breadboards since the legs are not very long, and they don't snap together or fit side-by-side on a 0.1 grid - but that's okay since we've got a bunch of sizes to choose from. These terminal blocks are also big enough for a range of wire gauges and easy to adjust with a screwdriver. They're not too chunky - so won't take up too much space on your protoboard - and found them pretty ideal for projects where you need a specific number of pins...
-
Precio: $47,919.00
Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charg
-Titulo Original : Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charger - v1 [ADA1904]-Fabricante : ADAFRUIT-Descripcion Original: Battery not included // Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charger - v1 Adafruit Product ID: 1904. Battery not included... -
Precio: $57,349.00Expira: 18/11/2021
Adafruit 2045 Si5351A Clock Generator Breakout Board - 8KHz
-Titulo Original : Adafruit Si5351A Clock Generator Breakout Board - 8KHz To 160MHz [ADA2045]-Fabricante : Adafruit-Descripcion Original: Si5351A clock generator (from 8KHz to 150+ MHz) // i2c interface // 3 independent outputs // Outputs are 3Vpp // Includes 3.3V LDO regulator and level shifting circuitry // Never hunt around for another crystal again, with the Si5351A clock generator breakout from Adafruit! This chip has a precision 25MHz crystal reference and internal PLL and dividers so it can generate just about any frequency, from... -
Precio: $33,049.00
Adafruit Conductive Fiber - Stainless Steel 20um - 10 grams
-Titulo Original : Adafruit Conductive Fiber - Stainless Steel 20um - 10 grams [ADA1088]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1088 // Stock Type: Wearables >> Materials >> Other // In Stock & Ready to Ship // This conductive fiber is super interesting! It's great for felting and could also be spun into yarn if that's your thing. We tested many different fiber thicknesses for needle felting and found that this one (20um fiber thickness) is the most pleasurable to work with. Use about 0.2g of the stuff to make a felt touch button suitable for use with the MaKey MaKey or capacitive touch sensing circuit. Make felt controllers or felt buttons onto an existing wool sweater! You can also make a squeeze/pressure sensor with this fiber, as it becomes less resistive the more you squeeze the fibers together. Make sure to combine this fiber with a natural animal fiber (which have scales) for best results. We think 10g is the perfect amount and will get you through several projects. MaKey MaKey and alligator clips not included... -
Precio: $46,669.00
Adafruit AC, DC & Servo Motors Sub-Micro Servo SG51R (1 piec
-Titulo Original : AC, DC & Servo Motors Sub-Micro Servo SG51R (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2201 // Stock Type: Robotics & CNC >> Robotics // In Stock & Ready to Ship // This is just about the cutest, tiniest little micro servo we could find, even smaller than the 9 gram micro servos we love so much. It can rotate approximately 180 degrees (90 in each direction) and works just like the standard kind you're used to but much smaller . You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. Of course, its not nearly as strong as a standard servo. Works great with the Motor Shield for Arduino or by just wiring up with the Servo library. Comes with a few horns and hardware. To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE ( see here for an example sketch ). Position 0 (1.5ms pulse) is middle, 90 (~2ms pulse) is all the way to the right, -90 (~1ms pulse) is all the way to the left...
-
Precio: $72,299.00
Adafruit 259 , USB Li-Ion/LiPoly Charger, v1.2
-Titulo Original : Adafruit 259 , USB Li-Ion/LiPoly Charger, v1.2-Fabricante : ADAFRUIT-Descripcion Original: Comes assembled and tested with a free bonus jst cable // For charging single lithium ion/lithium polymer // Weight: 5.7G ( 0.2Oz) // Chip supports a 10K ntc thermistor which we have stuffed as a plain 10K. For people who require temperature monitors (using high charge rates), remove the 10K and solder in the thermistor in its place // 0.1 inch // This is a lithium ion and lithium polymer battery charger based on the MCP73833. It uses a USB mini-b for connection to any computer or 'USB wall adapter'. charging is done in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up. The fast-charge current is 500MA by default, but is easily adjustable from 100MA up to 1000MA by soldering a through-hole resistor on-board. This board is great for DIY projects because it has 3 indicator LEDs - one for power, one for charging status and a third that indicates when charging is complete. You may also keep the battery connected to the charger and pass power through the additional jst connector using the included cable... -
Precio: $114,629.00
Adafruit 3505 Metro M0 Express - Designed For CircuitPython
-Titulo Original : Adafruit (PID 3505 Metro M0 Express - Designed For CircuitPython - ATSAMD21G18-Fabricante : Adafruit-Descripcion Original: ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328) and 32K of RAM (16x as much)! // This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. // Power the METRO with 7-9V polarity protected DC or the micro USB connector to any 5V USB source. The 2.1mm DC jack has an on/off switch next to it so you can turn off your setup easily. The METRO will automagically switch between USB and DC. // METRO has 25 GPIO pins, 12 of which are analog in, and one of which is a true analog out. There's a hardware SPI port, hardware I2C port and hardware UART. Logic level is 3.3V // Easy reprogramming, comes pre-loaded with the UF2 bootloader, which looks like a USB storage key. Simply drag firmware on to program, no special tools or drivers needed! It can be used to load up CircuitPython, PXT MakeCode or Arduino IDE (it is bossa-compatible) // Metro is our series of microcontroller boards for use with the Arduino IDE. This new Metro M0 Express board looks a whole lot like our original Metro 328, but with a huge upgrade. Instead of the ATmega328, this Metro features a ATSAMD21G18 chip, an ARM Cortex M0+. It's our first Metro that is designed for use with CircuitPython! CircuitPython is our beginner-oriented flavor of MicroPython - and as the name hints at, its a small but full-featured version of the popular Python programming language specifically for use with circuitry and electronics. Not only can you use CircuitPython, but the Metro M0 is also usable in the Arduino IDE. Native USB, there's no need for a hardware USB to Serial converter as the Metro M0 has built in USB support. When used to act like a serial device, the USB interface can be used by any computer to listen/send data to the METRO, and can also be used to launch and update code via the bootloader. It can also act like a keyboard, mouse or MIDI device as well. Four indicator LEDs and one NeoPixel, on the front edge of the PCB, for easy debugging. One green power LED, two RX/TX LEDs for data being sent over USB, and a red LED connected. Next to the reset button there is an RGB NeoPixel that can be used for any purpose. 2 MB SPI Flash storage chip is included on board. You can use the SPI Flash storage like a very tiny hard drive. When used in Circuit Python, the 2 MB flash acts as storage for all your scripts, libraries and files. When used in Arduino, you can read/write files to it, like a little datalogger or SD card, and then with our helper program, access the files over USB. Comes fully assembled with headers, tested, and with the UF2 bootloader loaded on. We also include 4 rubber bumpers to keep it from slipping off your desk. No soldering required to use, plug and play... -
Precio: $38,309.00Expira: 16/01/2022
Adafruit 12mm Coin Cell Breakout w/On-Off Switch [ADA1867]
-Titulo Original : Adafruit 12mm Coin Cell Breakout w/On-Off Switch [ADA1867]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1867 // Stock Type: Breakout Boards >> Batteries/Power // In Stock & Ready to Ship // Simple but effective - this breakout board has a CR1220 coin cell battery holder soldered on, an on/off switch and 0.1 pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar. There's two ground pins, one 'switched' power pin, and one pin that is always on. Comes with one fully assembled and tested breakout plus a small stick of 0.1 header so you can solder it on and plug into a breadboard. We also have a version without a switc... -
Precio: $25,019.00Expira: 08/09/2023
Adafruit Small Enclosed Piezo w/Wires [ADA1740]
-Titulo Original : Adafruit Small Enclosed Piezo w/Wires [ADA1740]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1740 // Stock Type: Sensors >> Sound/Noise // In Stock & Ready to Ship // This small (14mm diameter) piezo element is nicely enclosed so you can attach easily. Piezo elements convert vibration to voltage or voltage to vibration. That means you can use this as a buzzer for making beeps, tones and alerts AND you can use it as a sensor, to detect fast movements like knocks. You can also use it under a drum pad to make a drum/crash sensor It's rated for up to 9Vpp use but you can also use 3V square waves and its plenty loud. For music use with an Arduino, check out the Tone tutorial . For sensing, the Knock tutorial is your guide! There are thin wires attached, we plugged them into a solderless breadboard, but they might too thin to plug in directly into the Arduino socket headers...
-
Precio: $69,639.00Expira: 04/04/2021
Adafruit NeoTrellis RGB Driver PCB for 4x4 Keypad (3954)
-Titulo Original : Adafruit NeoTrellis RGB Driver PCB for 4x4 Keypad (3954)-Fabricante : ADAFRUIT-Descripcion Original: 4x4 button pad boards // Each order comes with one NeoTrellis board with seesaw chip and 16 NeoPixels already soldered in place // Elastomer button pad not included // By popular request, we've upgraded our popular Trellis elastomer button kits to now have a PCB with full color NeoPixel support! You heard that right, no more single-color LEDs, you can now have any color you like under the fantastic rubbery button pads we sell. These 4x4 button pad boards are fully tile-able and communicate over I2C. With 5 address pins, you've got the ability to connect up to 32 together in any arrangement you like. With our trusty seesaw I2C-to-anything chip, you don't even need to manage the NeoPixel driving. That's right! Both the button management and LED driving is completely handled for you all over plain I2C. With both Arduino/C++ and CircuitPython/Python library support, you can use these pads with any and all microcontroller or computer boards. Perfect for your next cool interface, MIDI instrument, control panel...whatever could benefit from beautiful diffused colorful buttons. For fast connection to a single board, we include a JST-PH 4-pin connector that will give you power+data access. It's Grove compatible (the cable fits, even though its not the exact same connector), or you can use a JST-PH 4 pin cable. You can tile up to 32 boards together by soldering them edge-to-edge and soldering closed the I2C address jumpers, then use one I2C connection for all tiled NeoTrellis boards! Each order comes with one NeoTrellis board with seesaw chip and 16 NeoPixels already soldered in place. Elastomer button pad not included, so be sure to pick one up... -
Precio: $94,989.00
Adafruit 3073 RFM96W LoRa Radio Transceiver Breakout - 433 M
-Titulo Original : Adafruit (PID 3073 RFM96W LoRa Radio Transceiver Breakout - 433 MHz-Fabricante : Adafruit-Descripcion Original: Packet radio with ready-to-go Arduino libraries // Uses the license-free ISM band: "European ISM" @ 868MHz or "American ISM" @ 915MHz up to 100 mW Power Output Capability (power output selectable in software) // Use a simple wire antenna or spot for uFL or SMA radio connector // SX1276 LoRa based module with SPI interface // +5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software) // Sending data over long distances is like magic, and now you can be a magician with this range of powerful and easy-to-use radio modules. Most WiFi, Bluetooth, Zigbee and other wireless chipsets use 2.4GHz, which is great for high speed transfers. If you aren't so concerned about streaming a video, you can use a lower license-free frequency such as 433 or 900 MHz. You can't send data as fast but you can send data a lot farther.' The modules do packetization, error correction and can also auto-retransmit so its not like you have worry about everything but less power is wasted on maintaining a link or pairing. These modules are great for use with Arduinos or other microcontrollers, say if you want a sensor node nework or transmit data over a campus or town. The trade off is you need two or more radios, with matching frequencies. This is the LoRa 433 MHz radio version. These are +20dBm LoRa packet radios that have a special radio modulation that is not compatible with the RFM69s but can go much much farther. They can easily go 2 Km line of sight using simple wire antennas, or up to 20Km with directional antennas and settings tweaking Range of approx. 2Km, depending on obstructions, frequency, antenna and power output All radios are sold individually and can only talk to radios of the same part number. E.g. RFM69 900 MHz can only talk to RFM69 900 MHz, LoRa 433 MHz can only talk to LoRa 433, etc. Each radio comes with some header, a 3.3V voltage regulator and levelshifter that can handle 3-5V DC power and logic so you can use it with 3V or 5V devices. You will need to cut and solder on a small piece of wire (any solid or stranded core is fine) in order to create your antenna. Optionally you can pick up a uFL or SMA edge-mount connector and attach an external duck... -
Precio: $94,989.00
Adafruit Electroluminescent (EL) Panel - 10cm x 10cm White (
-Titulo Original : Adafruit Electroluminescent (EL) Panel - 10cm x 10cm White (625)-Fabricante : ADAFRUIT-Descripcion Original: Glow Size: 10 cm x 10 cm (3.95" x 3.95") // Plastic Size: 10.4 cm x 10.4 cm (4.1" x 4.1"), about 0.5mm thick // Panel lifetime: >25000 hours // Operating voltage: 60-250VAC // Operating Frequency: 50-5000HZ // DESCRIPTION EL panel is the big sister to EL wire - it has the same glow effect but with a flat shape instead of a round shape. This is a big sheet of flexible plastic coated with EL material so its like one big glowing square. It emits an even glow over the entire shape. The glowing part of the panel is 10 cm x 10 cm (approx: 4 x 4).There's a plastic coating is about 10.4cm x 10.4cm. Its covered in what seems to be PVC, the tape is thus weather-proof - but note that the connectors are NOT waterproof, just a bit of heatshrink. This isn't something we would suggest leaving outdoors for extended periods. You can attach it by sewing through the clear plastic edging, or gluing the back to a flat surface. It is flexible but will crease and damage if folded. You can cut the panel up as long as the shape you cut out is continuous and has the JST cable attached. This panel is a slightly blue-tinted white color when lit and appears pink when off. Like all EL products, an inverter is REQUIRED to operate the panel Because EL tape has more surface area than wire, it requires a more powerful inverter. We suggest you use our 4xAAA inverter which is strong enough to power a single panel at once - plug it in and turn it on! For more permanent installations, the 12V EL inverter can also power a single panel and run off 8xAA batteries or a wall adapter. Please note! EL tape, EL wire and EL panel are made with different processes and so the color and brightness will not be consistent between the two: white tape, white wire and white panels will not necessarily match... -
Precio: $105,229.00
Adafruit Antennas GPS Antenna 3-5V 28dB 5 meter SMA
-Titulo Original : Antennas GPS Antenna 3-5V 28dB 5 meter SMA-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 960 // Stock Type: Wireless >> Antennas // In Stock & Ready to Ship // Give your Ultimate GPS V3 a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 5 meter long cable so it will easily reach wherever you need it to. The antenna is magnetic so it will stick to the top of a car or truck (or any other steel structure) Comes with a standard SMA connector on the end. If you want to connect to our Ultimate GPS V3 module, be sure to pick up a uFL to SMA adapter! GPS not included...
-
Precio: $41,929.00
Adafruit Pro Trinket Liion/lipoly Backpack Add-on
-Titulo Original : Adafruit Pro Trinket LiIon/LiPoly Backpack Add-On-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2124 // Stock Type: Power >> LiIon & LiPoly >> Accessories // In Stock & Ready to Ship // If you have a Pro Trinket you probably know it's the perfect little size for a portable project. This LiPoly backpack makes it really easy to do! Instead of wiring 2 or 3 boards together to make a charging system, this little PCB sits on top of the Pro Trinket and allows a LiPoly/LiIon battery to plug in. When the Pro Trinket USB port is powered, the battery is recharged automatically. Unplug the USB port and the Pro Trinket will switch over to the rechargeable battery.Ideally, this backpack is for use with the 3.3V Pro Trinket, so that the battery voltage (3.7V-4.2V) will get regulated down to 3.3V on the Pro Trinket board. However, many times, you can run a 5V Pro Trinket + accessories off of the ~4V from the LiPoly battery with no problem. (Technically its overclocking but we've never seen that affect the Pro Trinket itself, AVRs are happy to overclock without complaint).Solder the backpack on with the extra long header so that it can still plug into a breadboard, or clip the long header leads short afterwards for a slim package. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Seriously, it could not get more easy.If you want to add an On/Off switch, we also made that really easy. The two 0.1 holes with a box around them are the battery output line. Carefully cut the trace between them with a hobby knife and replace with two wires from a switch like this slide switch , or this pushbutton one , for example. Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up. The charge current is 100mA by default, so it will work with any size battery and USB port. If you want you can easily change it over to 500mA mode by soldering closed the jumper on the bottom, for when you'l... -
Precio: $38,959.00
Adafruit 419 Membrane 3x4 Matrix Keypad Extras ADA419
-Titulo Original : Adafruit Membrane 3x4 Matrix Keypad Extras [ADA419]-Fabricante : Adafruit-Descripcion Original: Punch in your secret key into this numeric matrix keypad. This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of a thin, flexible membrane material with an adhesive backing (just remove the paper) so you can attach it to nearly anything. The keys are connected into a matrix, so you only need 7 microcontroller pins (3-columns and 4-rows) to scan through the pad. Check the tutorials tab for links to an Arduino library and example code... -
Precio: $50,089.00
Adafruit 3296 DS1307 Real Time Clock Breakout Board
-Titulo Original : Adafruit 3296 DS1307 Real Time Clock Breakout Board-Fabricante : Adafruit-Descripcion Original: DS1307 Real Time Clock Breakout Board This real time clock (RTC) with battery backup allows your microcontroller project to keep track of time even if it's reprogrammed or if the power is lost. It's perfect for data logging, clock-building, time stamping, timers, alarms, and more. The DS1307 is the most popular RTC but it requires 5V power to work (although we've used it with 5V power and 3.3V logic successfully). The DS1307 is simple and inexpensive but not a high precision device. It may lose or gain up to 2 seconds a day. For a high-precision, temperature compensated alternative, take a look at the DS3231 precision RTC . It works great with an Arduino using our RTC library or with a Raspberry Pi (or similar single board linux computer) . Note: This product does not come with a CR1220 coin cell battery. We recommend you purchase a CR1220 coin cell battery to use with this product. Features PCB & header are included Plugs into any breadboard, or you can use wires Two mounting holes Will keep time for 5 years or more Specifications Length: 25.8mm/1.02in Width: 21.7mm/0.85in Height: 5mm/0.2in Weight: 2.3g/0.09oz Mounting holes are 2.2mm(0.086in) diameter, 25mm(0.98in) apart This board/chip uses I²C 7-bit address 0x68 . Made in China... -
Precio: $114,189.00
Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51
-Titulo Original : Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51 Cortex M4-Fabricante : ADAFRUIT-Descripcion Original: 512KB Flash and 192KB RAM // ATSAMD51J19 // 120MHz Cortex M4 // It's what you've been waiting for, the Feather M4 Express featuring ATSAMD51. This Feather is fast like a swift, smart like an owl, strong like a ox-bird (it's half ox, half bird, OK?) This feather is powered by our new favorite chip, the ATSAMD51J19 - with its 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this will for sure be your favorite new chipset. And best of all, it's a Feather - so you know it will work with all our FeatherWings! What a great way to quickly get up and running. The most exciting part of the Feather M4 is that while you can use it with the Arduino IDE - and it's bonkers fast when you do, we are shipping it with CircuitPython on board. When you plug it in, it will show up as a very small disk drive with main.py on it. Edit main.py with your favorite text editor to build your project using Python, the most popular programming language. No installs, IDE or compiler needed, so you can use it on any computer, even ChromeBooks or computers you can't install software on. When you're done, unplug the Feather and your code will go with you. The Feather M4 Express uses the extra space left over to add a Mini NeoPixel, 2 MB SPI Flash storage and a little prototyping space. You can use the SPI Flash storage like a very tiny hard drive. When used in CircuitPython, the 2 MB flash acts as storage for all your scripts, libraries and files. When used in Arduino, you can read/write files to it, like a little datalogger or SD card, and then with our helper program, access the files over USB...
-
destacado
Book : Worlds Apart (Story Thieves) - Riley, James (5753)
Precio: $54,109.00-Titulo Original : Worlds Apart (5) (Story Thieves)-Fabricante : Aladdin... -
destacado
Libro : El Poder De Los Mercados (entendiendo Su Mensaje) -
Precio: $116,939.00-Titulo Original : El Poder De Los Mercados: (entendiendo Su Mensaje) (Spanish Editio... -
destacado
5 X Zebra Sarasa Retractable Gel Ink Pens, Medium Point
Precio: $49,389.00-Titulo Original : Zebra Sarasa Retractable Gel Ink Pens, Medium Point 0.7mm, Black R... -
destacado
Vidrio Templado HTC U Ultra Anti Scratch Bu [3un] (1NBYIX5G)
![Vidrio Templado HTC U Ultra Anti Scratch Bu [3un] (1NBYIX5G)](https://images-na.ssl-images-amazon.com/images/I/61pqJDVyN8L.jpg "Vidrio Templado HTC U Ultra Anti Scratch Bu [3un] (1NBYIX5G)")
Precio: $59,209.00-Titulo Original : (3 Pack) Supershieldz for HTC U Ultra Tempered Glass Screen Protec... -
destacado
Libro : La Evaluación como Aprendizaje Cuando la flecha...
Precio: $92,799.00-Titulo Original : La Evaluacion Como Aprendizaje: Cuando La Flecha Impacta En La Dia... -
destacado
Bateria : Beats Studio 2.0
Precio: $104,779.00-Titulo Original : Bateria : Cameron Sino AEC643333 Wireless Headset Battery for Beat...
Contáctenos
- el bazar digital.com SRL
- 011 - 3221-3652
- info@elbazardigital.com
- +54 9 11 2290-6553
