Arriba

Componentes Electrónicos > Arduino

Mostrar: 
Mostrar del 1 al 24 (de 199 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Adafruit ADS1015 12-Bit ADC - 4 Channel with Programmable...
    Precio:  $1,922.00

    Adafruit ADS1015 12-Bit ADC - 4 Channel with Programmable...

    -Titulo Original : Adafruit ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier [ADA1083]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1083 // Stock Type: Breakout Boards // In Stock & Ready to Ship // For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range. We like this ADC because it can run from 2V to 5V power/logic, can measure a large range of signals and its super easy to use. It is a great general purpose 12 bit converter. The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1015's connected on a single 2-wire I2C bus for 16 single ended inputs. To get you started, we have example code for both the Raspberry Pi ( in our Adafruit Pi Python library ) and Arduino ( in our ADS1X15 Arduino library repository ) Simply connect GND to ground, VDD to your logic power supply, and SCL/SDA to your microcontroller's I2C port and run the example code to start reading data...
  • Adafruit GPIO Stacking Header for Pi A+/B+/Pi 2/Pi 3...
    Precio:  $956.00

    Adafruit GPIO Stacking Header for Pi A+/B+/Pi 2/Pi 3...

    -Titulo Original : Adafruit GPIO Stacking Header for Pi A+/B+/Pi 2/Pi 3 [ADA2223]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2223 // Stock Type: Raspberry Pi >> Raspberry Pi B+, Pi 2, & Pi 3 >> Prototyping // In Stock & Ready to Ship // Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has extra long 10mm pins, compared with our plain version which is the same base height but has 3mm header pins instead. With 10mm you can have a HAT that has extra pins to stack another HAT on top!You'll get one header per order. Note: The Raspberry Pi Model A+, Raspberry Pi 2 and Raspberry Pi 3 are also compatible with this product...
  • M5Stack Official CardKB Mini unidad de teclado MEGA328P Grove I2C USB ISP Programmer para ESP32 Arduino Development Boar
    Precio:  $1,940.00

    M5Stack Official CardKB Mini unidad de teclado MEGA328P Grove I2C USB ISP Programmer para ESP32 Arduino Development Boar

    -Titulo Original : RF Wireless Transmission Module 868 MHZ LoRa Spread-Spectrum Communication, 20dBm 100mW Measured Distance 3000M UART SX1276 Chip RF Receiver Transmitter, Super Anti-Interference Performance-Fabricante : MAKERFOCUS-Descripcion Original: User manual: https://drive.google.com/open?id=1boFZAoJ0MlykF7u_zhK6QC6vdvs94Zgo; This is a 100mW UART transparent and transmission wireless transceiver module, operates at 862893MHz, based on original imported RFIC SX1276 from SEMTECH. The module integrates the function of receiving and sending information, adopts LoRa spread-spectrum technology, which means the transmitting distance and penetration capacity are one time more than that of traditional Frequency-shift Keying // Using the FEC forward error correction algorithm, it can actively correct the interfered data packets, making the communication distance farther, the anti-interference ability stronger, and having the air wake-up function. LoRa Spread-spectrum Communication Super Anti-interference Performance: The RF Wireless Transmission Module adopts LoRa spread-spectrum technology, which means the transmitting distance and penetration capacity are one time more than that of traditional Frequency-shift Keying // Low Power Consumption FEC Forward Error Correction: Working on radio, applicable for battery powered applications. Using the FEC forward error correction algorithm, it can actively correct the interfered data packets, making the communication distance farther, the anti-interference ability stronger, and having the air wake-up function.Professional PCB Design Impedance Control: Reduced the transmission reflection of high frequency signals and improved the effective of signal transmission // Transmission Modes: The users can freely control the disuse and shutdown of the module. The wireless transceiver module support different sleep and stand-by modes. Energy consumption and performance are highly improved. There are four transmission modes: Transparent transmission (Point to Point), transparent transmission (Broadcasting), broadcast transmission and fixed transmission // High Quality Guaranty and Various Applied Occasions: The 868 MHz LoRa wireless transmission module has acquired CE Certificate, FFC Certificate and ROHS Certificate // Color: Mode 0: General mode: M0=0, M1=0;Low power consumptionOccasion (Most occasions) Mode 1:Wake mode:M0=1, M1=0; Using low power consumption, it's the mode of the transmitting party, automatically adding the wake-up code Mode 2:Power saving mode:M0=0, M1=1; Using low power consumption, it's the mode of the receving party, cannottransmit in this mode. Mode 3:Sleep mode:M0=1, M1=1; Using low power consumption, it's the mode of the receving party, cannottransmit in this mode. The module is in a sleep state and can accept parameter setting commands. Chip: SX1276 Model: E32-868T20D Transmit power: 100mW Communication Distance: 3000m RF connector: SMA-K Working frequency:862~893 MHz (Default: 868MHz) Transmitting power:10~20 dBm, Default: 20dBm Receiving sensitivity: -146 dBm Air data rate: 0.3k~19.2kbps(Default: 2.4kbps) Size: 21 * 36 mm(Without SMA) Antenna type: SMA-K (Not inclueded) Communication interface: UART (Baud rate: 1200~115200, default: 9600) Buffer: 512 bytes buffer (Automatically sub-packaging with 58 bytes per package) 1 * 868 MHZ UART SX1276 LoRa RF Receiver Transmitte...
  • Cable de impresora 65 pies, LiuTian USB 2.0 Cable de impresora Conectores chapados en oro de alta velocidad Cable de cab
    Precio:  $4,884.00

    Cable de impresora 65 pies, LiuTian USB 2.0 Cable de impresora Conectores chapados en oro de alta velocidad Cable de cab

    -Titulo Original : Printer Cable 65ft, LiuTian USB 2.0 Printer Cable High Speed Gold-Plated Connectors Printer Scanner Cable Cord A Male to B Male for HP, Canon, Lexmark, Epson, Dell, Xerox, Samsung etc-Fabricante : LiuTian-Descripcion Original: Ideal for connecting your keyboard, mouse, scanner, hard drive, printer, server, camera and more, to a laptop, computer (Mac/PC) or other USB-enabled device. // Corrosion-resistant gold-plated connectors and foil/braid shielding for long-term performance (without noise or signal loss). Full USB 2.0 capability; including 480 Mbps data transfer speed and backwards compatibility with older versions. // A tough, yet flexible PVC jacket and durable connector mold ensures secure fits and easy cable handling. // Supports up to 127 devices on a daisy-chain configuration. Transfer files, print documents, connect a mouse/keyboard, share images, or sync devices in general. // Wide use:Plug and play.The Printer Cable is compatible with common devices with USB type B connector like Arduino, Blue, Brother, Canon, CyberPower, Dell, Epson, Fujitsu, HP, IOGEAR, Lexmark, M-Audio, and Samsung // Size:  This USB 2.0 high speed cable can be used to connect computer to peripheral devices such as printers, scanners, external hard drives etc.  - High quality USB 2.0 high speed cable  - Supports data transfer rate at up to 480Mbps  - Supports plug & play  - Compatible with USB1.0, 1.1, 2.0.  - PC and Mac compatible.  - One Connector End: Type A USB 2.0 USB.  - Other Connector End: Type B USB 2.0 USB.  - Foil and braid shielding reduces EMI/RFI interference and twisted-pair construction helps reduce cross talk thus ensuring high-speed, error-free data transfer.  - Cable Length: 65feet/(20 meters).  1 x 65FT USB 2.0 Printer Cable...
  • M5Stack ESP32 Kit de desarrollo básico básico Micro contr...
    Precio:  $25,823.00

    M5Stack ESP32 Kit de desarrollo básico básico Micro contr...

    -Titulo Original : M5Stack ESP32 Basic Core Development Kit Extensible Micro Control WiFi BLE IoT Prototype Board for Arduino (5pcs/1lot) (5piece)-Fabricante : M5STACK-Descripcion Original: Description: 1. Using ESP32 Chip. Compatible with Wi-Fi & Blurtooth features. 2. With 2.0 Inch 320x240 Colorful TFT LCD, 1W Speaker and high performance 3D antenna. 3. The bottom base integrates 150mAh Lithium battery, bus I/O extension and magnet adsorption. Shipping Method: Default to use epacket Parcel (Above $190 will use DHL/ FedEx/ UPS) Handle Time: Orders will be shipped out within 48 hours in business day. Delivery Time: It generally takes 5-15 business days to deliver packages to most destinations. In peak reason, there could be 5-15 days delay. Package Included: Core*1 Battery Bottom*1 Type-c Cable*1 Dupont Cable*10 User Manual*1 Sticker*...
  • Arduino Robot Kit DFROBOT (7QFYHQ6Z)
    Precio:  $7,865.00

    Arduino Robot Kit DFROBOT (7QFYHQ6Z)

    -Titulo Original : DFRobot Gravity: Starter Kit for Arduino (KIT0111)-Fabricante : DFROBOT-Descripcion Original: Gravity Arduino Starter kit  is a plug&play electronics toolkit that provides Arduino beginners and makers with the easiest experience of learning and playing with the Arduino platform. // Gravity Starter Kit includes a DFRduino UNO R3 microcontroller, which functions exactly the same as Arduino UNO, and 12 most popular and interesting electric components and sensors // With the IO expansion shield, sensors can be connected directly onto the board without jumper wires or bread board // Gravity Arduino Starter kit  is a plug&play electronics toolkit that provides Arduino beginners and makers with the easiest experience of learning and playing with the Arduino platform...
  • Teensy LC with pins, plus breadboard and usb cable
    Precio:  $4,121.00

    Teensy LC with pins, plus breadboard and usb cable

    -Titulo Original : Teensy LC with pins, plus breadboard and usb cable-Fabricante : SPORTS INTERNET SOLUTIONS LLC-Descripcion Original: Includes Teensy LC with pins, breadboard and USB cable // Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cortex-M0+ processor at 48 MHz, 62K Flash, 8K RAM, 12 bit analog input & output, hardware Serial, SPI & I2C, USB, and a total of 27 I/O pins. Teensy-LC maintains the same form-factor as Teensy 3.2, with most pins offering similar peripheral features...
  • Tarjeta de desarrollo del módulo de cámara ESP32 Cam WiFi y Bluetooth con módulo de cámara OV2640 - Paquete de 2
    Precio:  $2,382.00

    Tarjeta de desarrollo del módulo de cámara ESP32 Cam WiFi y Bluetooth con módulo de cámara OV2640 - Paquete de 2

    -Titulo Original : MakerFocus 2pcs nRF24L01P+PA+LNA RF Wireless Transmission Module 2.4GHz ML01DP5 22dBm 100mW 2300M Measured Distance SPI Interface with Antenna Anti Theft Anti-Interference-Fabricante : MAKERFOCUS-Descripcion Original: ★Instruction: https://drive.google.com/drive/folders/1Ujn_24yEq7LEECZaUXEs2dlr0RzBdEhK // ML01DP5 is based on original imported nRF24L01P for the worldwide 2.4 - 2.5 GHz ISM band; With a FREE 2.4G SMA Antenna which can measured 2300m, shielding function and low-radiation.Frequency:2.4GHz; Max Power:100mW // Equipped with 20dBm power amplifier chip which makes the transmitting power achieves 100mW (20dBm) while the receiving sensitivity enhanced by 10dB. Those features make the transmitting distance 10 times longer than nRF24L01P itself. // The anti-interference shielding cover on the module makes the anti-interference performance better; This Product has passed CE and ISO9001 Certification. // We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation! // Color: Power Supply: 2.0V3.6VDC Communication interface: Standard SPI mode Operating frequency: 2400MHz-2525MHz(1MHz step ) Maximum power: 20dBm (about 100mW) Gbps: 250k,1M,2M, Adjustable Antenna Type: SMA Recommended Measured distance: 2000M(Actual measurement distance: 2300M) Working Humidity: <90% RH Connector:2*4*2.54mm Size:18 * 33.4mm Transmitting Current: 20dBm Operating Temperature: -40℃ ~ +85℃ Storage Temperature: -55℃~ +125℃ Working Humidity: <90% RH Communications levels: 0.7VDD5.2VDC Emission current: 95mA Sinks current: 20mA Transceiver length:single packet: 1—32 bytes, 3 FIFO buffer RSSI support: Only support packet loss statistics Receiving Sensitivity: -106dBm250Kbps -96dbm1Mbps -92dbm2Mbps 2 * nRF24L01P+PA+LNA RF Wireless Transmission Module 2 * Antenn...
  • (Paquete de 2) ESP8266 microcontrolador NodeMCU Lua V3 WiFi con CH340G
    Precio:  $1,655.00

    (Paquete de 2) ESP8266 microcontrolador NodeMCU Lua V3 WiFi con CH340G

    -Titulo Original : (2 Pack) ESP8266 microcontroller NodeMCU Lua V3 WiFi with CH340G-Fabricante : Debaser Electronics-Descripcion Original: (2 pack) ESP8266 microcontroller NodeMCU Lua V3 WIFI with CH340G // Great for IOT projects // Compatible with the Arduino IDE when you add the ESP8266 family through the Boards Manager and select ESP-12E. // (2 pack) ESP8266 microntroller with WIFI and CH340G USB. Great for IOT projects. Can be used with the Arduino IDE by adding the ESP8266 board through the Boards Manager and then selecting ESP-12E...
  • MakerFocus M5Stack ESP32 Módulo de bus oficial para Arduino M5Stack ESP32 Kit de desarrollo de IoT con placa de prototip
    Precio:  $5,160.00

    MakerFocus M5Stack ESP32 Módulo de bus oficial para Arduino M5Stack ESP32 Kit de desarrollo de IoT con placa de prototip

    -Titulo Original : RISC-V AI Camera AIOT(AI+IOT) Dual-core M5Stick-V(Without WiFi) with OmniVision OV7740 Sensor, Speaker and LCD Screen Display for Face Recognition, Logistics Sorting Robot-Fabricante : MAKERFOCUS-Descripcion Original: ★Document: https://drive.google.com/open?id=1QQFv2dBAt8qOTxdpgJyvMpp8EfwABP28; ★ User guide: https://docs.m5stack.com/#/en/quick_start/m5stickv/m5stickv_quick_start; ★MaixPy Links--Web page,Quick Start Guide: https://maixpy.sipeed.com/en/. NOTE: this M5stick V come without WIFI and bluetooth. // ★M5Stack recently launched the new AIOT(AI+IOT) Camera powered by Kendryte K210 -an edge computing system-on-chip(SoC) with dual-core 64bit RISC-V CPU and state-of-art neural network processor. M5stick-V AI Camera features its integration with machine vision capabilities, featuring the unprocessed acceptability to AI Visioning with high energy efficiency and low cost. We co-oped with Sipeed providing the MicroPython environment makes programming onM5stick-V easier. // ★The module comes with the OmniVision OV7740 sensor, using the OmniPixel3-HS technology, providing a best-in-class low light sensitivity, making it ideal for machine vision. In addition to an OV7740 sensor, M5stick-V features more hardware resources such as a speaker with built-in I2S Class-D DAC, IPS screen, 6-axis IMU, 200mAh Li-po battery, and more. // ★More than the visioning, M5stick-V also features the embedded APU - Audio Processor. With its hardware beam-forming support and dual 512-point FFT units, the M5stick-V is also capable of a series of machine hearing works like voice wake-up to speech recognition. // ★Applications/What can M5Stick-V do? -- Face recognition/detection, Object detection/classification, Obtaining size and coordinates of the target in real-time, Obtaining the type of detected target in real-time, Shape recognition, Video/Audio Record/Display, Game simulator. //...
  • Arduino Uno R3 Kit KOOKYE (1FNT8MFC)
    Precio:  $5,878.00

    Arduino Uno R3 Kit KOOKYE (1FNT8MFC)

    -Titulo Original : KOOKYE Universal Starter Kits for Arduino (UNO R3 Board Included), NodeMCU IoT (ESP8266 WiFi Modules Not Included),Graphical Programming-Fabricante : KOOKYE-Descripcion Original: DETAILED TUTORIAL--This sensor modules in this universal kit not only can be used for arduino( UNO R3 Board Included), but also for raspberry pi and nodemcu esp8266 (Raspberry pi board and nodemcu esp8266 modules not included).You would find the detailed tutorials instruction in our KOOKYE website.Arduino universial kit tutorial:http://kookye.com/?p=1058; NodeMCU ESP8266 wifi kit tutorial:http://kookye.com/?p=3545; // UNIVERSAL ACCESSORIES--You can learn the basic concepts of buttons, resistors, sensors, IR remote control and receivers, how to use sensors to detect environment(i.e. light, temperature), and how to use 74HC595 Shifting Register IC to extend Arduino Digital Ports. // CREATIVE PROJECTS--The kit has 19 projects and 26 items in high quality for the beginners.Every project in this starter kit has detailed circuit graph, step-by-step tutorial and fully-tested Arduino sample codes which can save lots of your research time and speed up your learning progress. // SUPER KITS--This kit walks you through the very basics of using the UNO R3 board in a hands-on way. You'll learn through building several creative projects. Starting from the basics of electronics, to more complex projects, the kit will help you control the physical world with components. // PERFECT FOR BEGINNERS & PROS--This Kit includes the KOOKYE UNO R3 Board (fully compatible with Arduino UNO R3),developed specially for those beginners who are interested in Arduino. You could separately buy a raspberry pi board or nodemcu esp8266 wifi modules separately to continue to learn these universal sensor modules. // 1* KOOKYE UNO R3 Board 24* LED(6* white/Red/Yellow/Green) 1* 8*8 Dot matrix LED display Modules 1* 4-Digit 7 segment LED display modules 1* 1-Digit 7 segment LED display modules 3* Photoressitor Modules 1* Potentionmeter Modules 1* 74HC595 Shifting register 1* I2c display modules(16*2) 1* Stepper Motor+Bridge 1* Piezo Buzzer Modules 1* micro servo motor 1* Tilt Sensor modules 1* DHT11 Humidity sensor modules 1* Temperature sensor modules TMP36 1* Ultrasonic module HC-SR04 1* Obstacle avoidance sensor modules 1* Infrared remote controller and receiver 5* Push buttons 1* Battery snap 1* Acrylic base plate 1* Plastic box 1* Breadboard Resistors: 15* Resistors(200 ohm) 15* Resistors(470 ohm) 15* Resistors(10K ohm) 15* Resistors(1K ohm) Jumper Wires: 49*12cm male-male 4*20cm male-male 4*25cm male-male 8*16cm female-femal...
  • Display Development Tools TFP401 HDMI/DVI Breakout w/touch
    Precio:  $5,510.00

    Display Development Tools TFP401 HDMI/DVI Breakout w/touch

    -Titulo Original : Display Development Tools TFP401 HDMI/DVI Breakout w/touch-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2219 // Stock Type: LCDs & Displays >> HDMI/DVI Decoders // In Stock & Ready to Ship // It's a mini HDMI decoder board! So small and simple, you can use this board as an all-in-one display driver for TTL displays, or perhaps decoding HDMI/DVI video for some other project. This breakout features the TFP401 for decoding video, and for the touch version, an AR1100 USB resistive touch screen driver.The TFP401 is a beefy DVI/HDMI decoder from TI. It can take unencrypted video and pipe out the raw 24-bit color pixel data - HDCP not supported! It will decode any resolution from 25-165MHz pixel clock, basically up to 1080p. We've used this breakout with 800x480 displays, so we have not specifically tested it with higher resolutions. We added a bunch of supporting circuitry like a backlight driver and configured it for running basic TTL display panels such as the ones we have in the shopYou can even power the display and decoder from a USB port. For example, with a 5 800x480 display and 50mA backlight current, the current draw is 500mA total. You can reduce that down  370mA by running the backlight at half-brightness (25mA). With the backlight off, the decoder and display itself draws 250mA. If you want more backlight control, there's a PWM input, connect that to your microcontroller or other PWM output and you can continuously dim the backlight as desiredWe have two versions, one is video only and one is video+touch. This is the version with touch! Pair it with a screen that has a resistive touch overlay. The USB port then acts as both power and data, with the touch screen appearing like a USB mouse. We've tested it sucessfully on Mac, Windows, and Debian Linux (Raspbian on a Raspberry Pi). Other Linux distributions may or may not work, but if you're running Linux you're probably used to that.This driver is designed specifically as a small and easy to use display driver for our 40-pin TTL displays. In particular, we suggest it for use with single board computers (or desktop/laptops!) w...
  • Gikfun Pro Mini Atmega328 5V 16Mhz para Arduino (paquete de 3 piezas) EK6013x3
    Precio:  $1,655.00

    Gikfun Pro Mini Atmega328 5V 16Mhz para Arduino (paquete de 3 piezas) EK6013x3

    -Titulo Original : Gikfun Pro Mini Atmega328 5V 16Mhz For Arduino (Pack of 3pcs) EK6013x3-Fabricante : Esooho-Descripcion Original: Arduino Pro Mini // 3PCS RED Pro Mini Atmega328P board // 5V Arduino running the 16MHz bootloader // ATmega328 running at 16MHz with external resonator (0.5% tolerance) // USB connection off board // It's RED! It's the Pro Mini! This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board. Features: ATmega328 running at 16MHz with external resonator (0.5% tolerance) USB connection off board 5V regulator Max 150mA output Over current protected DC input 5V up 12V On board Power and Status LEDs Analog Pins: 8 Digital I/Os: 14 Packing List: 3 x Pro Mini Atmega328P board Note: 1.The product is used for learning. It's Prohibited for any other purpose. 2.Suit for people above 18 year's old with 1 year electronic diy experience. Or use it correctly under the guidance of electronic specializer. 3.Please wear anti-static gloves or bracelet when operate electronic products...
  • 100 unidades luces led 5 mm transparentes (luz color azul)
    Precio:  $1,241.00

    100 unidades luces led 5 mm transparentes (luz color azul)

    -Titulo Original : 100 Pieces Clear LED Light Emitting Diodes Bulb LED Lamp, 5 mm (Blue) -Fabricante : eBoot-Descripcion Original: Compatible con Compatible with: Suunto 3 Fitness, Suunto 5, Traverse, Kailash, Spartan Trainer, Ambit 1 2 3 Smartwatch...
  • Arduino Uno R3 Kit SUNFOUNDER (7PKSWQJQ)
    Precio:  $6,494.00

    Arduino Uno R3 Kit SUNFOUNDER (7PKSWQJQ)

    -Titulo Original : SunFounder Mega 2560 R3 Project Super Starter Kit for Arduino UNO R3 Mega2560 Mega328 Nano,25 Tutorials Included-Fabricante : SUNFOUNDER-Descripcion Original: Super Kit and Affordable Price - This is a complete arduino mega 2560 kit with more than 200pcs components for learners, the most economical way to learn Arduino, electronics and programming with the good price. // Detailed Instructions - With detailed pdf tutorial in the CD, you can learn to code and program faster and easier with all the components. // 25 Projects Provided - As an upgraded Starter kit for arduino mega ,more than 20 interesting lessons are included. Allowing for a dynamic creative learning experience. // Excellent package - A nice plastic packaging box is included for easy and neat storage, being a surprise when you receiving the product. // Professonal Support - Sunfounder customer service team are always willing to solve any question from our customers, please refer to the URL and after-sales service email on the CD if you have any question, it will ultimately aid us in continually improving our products and services. //...
  • Adafruit Ultimate GPS FeatherWing
    Precio:  $7,405.00

    Adafruit Ultimate GPS FeatherWing

    -Titulo Original : Adafruit Ultimate GPS FeatherWing-Fabricante : ADAFRUIT-Descripcion Original: This FeatherWing plugs right into your Feather board and gives it a precise, sensitive, and low power GPS module for location identifcation anywhere in the world. As a bonus, the GPS can also keep track of time once it is synced with the satellites. // The Wing is built around the MTK3339 chipset, a no-nonsense, high-quality GPS module that can track up to 22 satellites on 66 channels, has an excellent high-sensitivity receiver (-165 dB tracking!), and a built in antenna. It can do up to 10 location updates a second for high speed, high sensitivity logging or tracking. Power usage is incredibly low, only 20 mA during navigation. // The MTK3339-based module has external antenna functionality. The module has a standard ceramic patch antenna that gives it -165 dB sensitivity, but when you want to have a bigger antenna, you can snap on any 3V active GPS antenna via the uFL connector. The module will automatically detect the active antenna and switch over! // We added some extra goodies to make this GPS FeatherWing better than a breakout: a FET-driven ENABLE pin so you can turn off the module using any microcontroller pin for low power use, a CR1220 coin cell holder to keep the RTC running and allow warm starts and a tiny bright red LED. The LED blinks at about 1Hz while it's searching for satellites and blinks once every 15 seconds when a fix is found to conserve power. // Comes as a fully assembled FeatherWing with GPS module and a coin cell holder. However, the 12mm coin cell is not included - it isn't required but if you would like a battery backup, a CR1220 coin battery must be purchased seperately. We also toss in some header so you can solder it in and plug into your Feather. // Satellites: 22 tracking, 66 searching Patch Antenna Size: 15mm x 15mm x 4mm Update rate: 1 to 10 Hz Position Accuracy...
  • Arduino Robot Kit (soporta arduino IDE, Mixly y Scratch)
    Precio:  $14,783.00

    Arduino Robot Kit (soporta arduino IDE, Mixly y Scratch)

    -Titulo Original : Keywishbot Smart Robot Car Kit, 4WD Remote Control Car for Arduino DIY Learning Kit,with BLE Development Board,Ultrasonic Sensor,Great Educational STEM Toys Gift, Support Scratch Library -Fabricante : Keywishbot -Descripcion Original: Fit Size: Compatible with Apple Watch 38mm 40mm ALL Models, including: Series 5 / Series 4 / Series 3 / Series 2 / Series 1 / Sport / Edition / Nike+ / Hermes. Fit for 6.32"-8.27"(160mm-210mm) wrist. The Color is Camel Brown Band + Rose Gold Adapter, the adapter match the color of the watch Series 5/4/3 Gold Aluminum Case. Not same as the color of the Watch Series 2 & Series 1 Gold Aluminum Case and Series 5/4 Gold Stainless Steel Case. // Top Leather iWatch Strap: 100% genuine calf leather.skin-friendly, comfortable touch feeling on your wrist.And the interior lining is also made of calf leather. // Upgraded Adapter: Metal Adapter are included for easy installation. We use upgrade screws to lock the band tightly and security. Don't need to worry about the adapters fall apart again. // Security: Band comes with stainless steel adapters on both ends, which lock onto the watch precisely, it is easy to clip on and remove. // What You Get: 1 x Compatible with Apple Watch Band ( Fit for 38mm and 40mm, No Watch included). 18-Month Warranty Guaranty after the date of purchase, unconditionally REFUND or REPLACEMENT with any quality problems, lifelong friendly customer service. //...
  • Teensy 3.5 - 120 Mhz Arm Cortex-m4 - Chip Mk64fx512vmd12
    Precio:  $3,992.00

    Teensy 3.5 - 120 Mhz Arm Cortex-m4 - Chip Mk64fx512vmd12

    -Titulo Original : Teensy 3.5-Fabricante : PJRC-Descripcion Original: 120 MHz ARM Cortex-M4 with Floating Point Unit // 512K Flash, 192K RAM, 4K EEPROM // Microcontroller Chip MK64FX512VMD12 // 120 MHz ARM Cortex-M4 with Floating Point Unit 512K Flash, 192K RAM, 4K EEPROM Microcontroller Chip MK64FX512VMD12 1 CAN Bus Port 16 General Purpose DMA Channels 5 Volt Tolerance On All Digital I/O Pins 62 I/O Pins (42 breadboard friendly) 25 Analog Inputs to 2 ADCs with 13 bits resolution 2 Analog Outputs (DACs) with 12 bit resolution 20 PWM Outputs USB Full Speed (12 Mbit/sec) Port Ethernet mac, capable of full 100 Mbit/sec speed Native (4 bit SDIO) micro SD card port I2S Audio Port, 4 Channel Digital Audio Input & Output 14 Hardware Timers Cryptographic Acceleration Unit Random Number Generator CRC Computation Unit 6 Serial Ports (2 with FIFO & Fast Baud Rates) 3 SPI Ports (1 with FIFO) 3 I2C Ports Real Time Cloc...
  • HiLetgo ESP-WROOM-32 ESP32 ESP-32S Placa de desarroll (4J7N)
    Precio:  $2,087.00

    HiLetgo ESP-WROOM-32 ESP32 ESP-32S Placa de desarroll (4J7N)

    -Titulo Original : ESP32 Camera Module(Arduino Camera, Raspberry Pi Camera), OV2640 2 Mega Pixels Camera, with Type C Port and 3D WiFi Antenna, Mini Camera Board for Arduino, Raspberry Pi 3B/3B+ and Pi 2B+ IOT DIY-Fabricante : MAKERFOCUS-Descripcion Original: ★User Guide: https://docs.m5stack.com/#/en/quick_start/m5camera/m5camera_quick_start; ★IDF development environment, ★Demo: github.com/m5stack/esp32-cam-demo; ★Datasheet:https://github.com/m5stack/esp32-cam-demo/blob/m5cam/M5CAM-ESP32-A1-POWER.pdfMPU6050. // ★M5Stack ESP32 Camera: The M5Stack ESP32 Camera is a tiny module based on ESP32 chip and OV2640 sensor. You can program it through the ESP-IDF. The board reserved the MPU6050,BME280 and an analog MIC.This module with a IP5306 IC chip and it can be used with lithium battery (Standard voltage: 3.7V4.2V). // ★OV2640 Camera Module: The camera is CMOS camera, CMOS size: 1/4", field of view : 65 degree, maxmium Pixel: 200M pixels (Because of the small RAM, the board can’t obtain it. It can output images up to 800*600 JPEG.) // ★OV2640 Sensor​​​​​​'s Parameter:Standard SCCB interface, compatible with I2C interface;Output Formats(8-bit) is YUV(422/420)/YCbCr422; RGB565/555; 8-bit compressed data; 8-/10-bit Raw RGB data; UXGA/SXGA: 15fps; SVGA: 30fps; CIF: 60fps; Scan Mode: Progressive. // ★For people: Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups, educational groups amd Maker groups. // Color: Dual-core Tensilica LX6 microprocessor Up to 240MHz clock frequency 520kB internal SRAM 4MB Flash memory Integrated 802.11 BGN WiFi transceiver Integrated dual-mode Bluetooth (classic and BLE) Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096) CP2104 USB TTL Standard SCCB interface, compatible with I2C interface Output Formats(8-bit): YUV(422/420)/YCbCr422 RGB565/555 8-bit compressed data 8-/10-bit Raw RGB data Maximum Image Transfer Rate UXGA/SXGA: 15fps SVGA: 30fps CIF: 60fps Scan Mode: Progressive CMOS size: 1/4 Field of View : 78° best sensor resolution: 1600 * 1200 IO voltage: 1.7V-3.3V Analog voltage: 2.5-3.0v (internal LDO powers 1.2V to the core) Power Consumption: TBD Sleep andlt;20μA Temperature Operation: -30°C to 70°C Stable work: 0°C to 50°C Maximum rms rate: 15fps SXGA Sensitivity: 1.3V/(Lux-sec) Signal to noise ratio: 40 dB Dynamic range: 50 dB Scan Mode: Progressive Electronic exposure: Line 1 to Line 1247 Pixel area: 2.2μm x 2.2μm Dark current: 15mV/s at 60°C 1 * EESP32 Module Development Board with OV2640 Camer...
  • Adafruit USB Cable with Switch - A/MicroB [ADA2379]
    Precio:  $1,554.00

    Adafruit USB Cable with Switch - A/MicroB [ADA2379]

    -Titulo Original : Adafruit USB Cable with Switch - A/MicroB [ADA2379]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2379 // Stock Type: Cables >> USB Cables // In Stock & Ready to Ship // ON...off...ON...off...ON...off...ON...off...WE CAN'T STOP CLICKING THIS ON-OFF SWITCH! It has such a satisfying click and it works so well.  Plus, it's just about perfect for charging your Raspberry Pi - either Model B, A+, B+, or Pi 2.  Just hook up the standard USB end to a 5V 1A USB port power supply or 5V 2A USB port power supply and the Micro B end to a Raspberry Pi and you have a Pi with a switch. This cable will also work with anything that has a MicroUSB port.   This cable does not transfer data - so it's mostly just good for powering and charging devices - but adding an on/off switch to your power supply is a nice addition and one that we absolutely love clicking...
  • Adafruit Break-away 0.1 2x20-pin Strip Dual Male Header...
    Precio:  $956.00

    Adafruit Break-away 0.1 2x20-pin Strip Dual Male Header...

    -Titulo Original : Adafruit Break-away 0.1 2x20-pin Strip Dual Male Header [ADA2822]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2822 // Stock Type: Raspberry Pi >> Raspberry Pi B+, Pi 2, & Pi 3 >> Prototyping // In Stock & Ready to Ship // If we could eat headers, we'd have them for breakfast, lunch, and dinner.  But we can't :( So we're making the best of it and selling them!This 2x20-pin strip male header is a great way to add pins to 2x20 0.1 holes in a PCB.  They're also perfect companion piece to our 2x20-pin right-angle female header ...
  • M5Stack USB Driver Module Integrated MAX3421E que agr (CXYW)
    Precio:  $2,281.00

    M5Stack USB Driver Module Integrated MAX3421E que agr (CXYW)

    -Titulo Original : Genuine/Original LOLIN D32 V1.0.0 - WiFi & Bluetooth Board Based ESP-32 ESP32 ESP-WROOM-32 4MB Flash Arduino MicroPython Compatible (1 Piece, D32 V1.0.0 LED)-Fabricante : STAR MARS-Descripcion Original: Genuine/Original LOLIN D32 V1.0.0 LED // New Logo - LOLIN (previous WeMos) // Espressif Official ESP32-WROOM-32 Module, Lastest ESP32 Version: REV1 // D32-LED: The red LED is fast flashing when the battery is not connected. // Compatible with MicroPython, Arduino // Capacity:  |  Color: Lastest ESP32 Version: REV1WIFI,Bluetooth  4MB FLASHLithium battery interface, 500mA Max charging currentDefault firmware: lastest MicroPython    Board Power Supply(USB)  5V    Supported Batteries             Lipo Battery 3.7V    Operating Voltage                3.3V    Digital I/O Pins                     22    Analog Input Pins                 6 (VP, VN, 32, 33, 34, 35)    Analog Output Pins              2 (25, 26)    LED_BUILTIN                      5    Clock Speed                        (Max) 240Mhz    Flash                                   4M bytes Note: All of the IO pins run at 3.3V.1x Genuine/Original LOLIN D32 V1.0.0 LED Development Boar...
  • Cable de impresora 40 pies, LiuTian USB 2.0 Cable de impresora Conectores chapados en oro de alta velocidad Cable de cab
    Precio:  $3,421.00

    Cable de impresora 40 pies, LiuTian USB 2.0 Cable de impresora Conectores chapados en oro de alta velocidad Cable de cab

    -Titulo Original : Printer Cable 40ft, LiuTian USB 2.0 Printer Cable High Speed Gold-Plated Connectors Printer Scanner Cable Cord A Male to B Male for HP, Canon, Lexmark, Epson, Dell, Xerox, Samsung etc-Fabricante : LiuTian-Descripcion Original: Ideal for connecting your keyboard, mouse, scanner, hard drive, printer, server, camera and more, to a laptop, computer (Mac/PC) or other USB-enabled device. // Corrosion-resistant gold-plated connectors and foil/braid shielding for long-term performance (without noise or signal loss). Full USB 2.0 capability; including 480 Mbps data transfer speed and backwards compatibility with older versions. // A tough, yet flexible PVC jacket and durable connector mold ensures secure fits and easy cable handling. // Supports up to 127 devices on a daisy-chain configuration. Transfer files, print documents, connect a mouse/keyboard, share images, or sync devices in general. // Wide use:Plug and play.The Printer Cable is compatible with common devices with USB type B connector like Arduino, Blue, Brother, Canon, CyberPower, Dell, Epson, Fujitsu, HP, IOGEAR, Lexmark, M-Audio, and Samsung // Size:  This USB 2.0 high speed cable can be used to connect computer to peripheral devices such as printers, scanners, external hard drives etc.  - High quality USB 2.0 high speed cable  - Supports data transfer rate at up to 480Mbps  - Supports plug & play  - Compatible with USB1.0, 1.1, 2.0.  - PC and Mac compatible.  - One Connector End: Type A USB 2.0 USB.  - Other Connector End: Type B USB 2.0 USB.  - Foil and braid shielding reduces EMI/RFI interference and twisted-pair construction helps reduce cross talk thus ensuring high-speed, error-free data transfer.  - Cable Length: 40 feet/(12 meters).  1 x 40FT USB 2.0 Printer Cable...
  • MakerFocus M5Stack TOF Módulo de unidad Módulo de s (Z5QM)
    Precio:  $2,925.00

    MakerFocus M5Stack TOF Módulo de unidad Módulo de s (Z5QM)

    -Titulo Original : MakerFocus ESP32 OLED WiFi Kit ESP-32 0.96 Inch OLED Display WiFi+Bluetooth CP2102 Internet Development Board for Arduino ESP8266 NodeMCU-Fabricante : MAKERFOCUS-Descripcion Original: Note: This item comes unassembled, soldering of headers is required. Can lithium battery powered, the lithium battery is not included, battery may be purchased here: https://www.amazon.com/dp/B079M2W85C. Link to download English documentation and pinout diagram: https://www.adrive.com/public/drzr3P/datasheet%20F000905.rar; https://drive.google.com/open?id=0B8DSGdAr8_31d19WQmN6SE1fLVE; GitHub: https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series // 2. ESP32 development board, Support arduino IDE, WIFI 802.11 b/g/n/e/i, Transmit power: 19.5 dBm 11b, 16.5 dBm 11g, 15.5 dBm 11n // ESP32 OLED, development board with 0.96inch OLED display; UDP continues to throughput by 135 Mbps, Receiver sensitivity up to - 98 dBm, Supports Sniffer, Station, softAP and Wi-Fi Direct modes // Integrated dual-mode bluetooth( traditional bluetooth and BLE low power bluetooth) // We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking for your consultation! // WIFI Kit series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth). Onboard 4MByte(32M-bit) Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development environment Operating voltage: 3.3V to 7V Operating temperature range: -40 ° C to + 90 ° C Data rate: 150 Mbps 11n HT40,72 Mbps 11n HT20,54 Mbps 11g, 11 Mbps 11b Transmit power: 19.5 dBm 11b, 16.5 dBm 11g, 15.5 dBm 11n Flash Size: 4MByte(32M-bit) Module Size:50*25.4*10.3 mm Lithium battery interface:2Pin-1.25mm interface Receiver sensitivity up to - 98 dBm UDP continues to throughput by 135 Mbps Supports Sniffer, Station, softAP and Wi-Fi Direct modes 1 * ESP32 Development Board with OLED 2 * Pin header...
Mostrar del 1 al 24 (de 199 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]