Arriba

Componentes Electrónicos > Arduino

Mostrar: 
Mostrar del 1 al 24 (de 137 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • KIT Luces LED 3mm y 5mm (300 unidades) para arduino
    Precio:  $2,259.00

    KIT Luces LED 3mm y 5mm (300 unidades) para arduino

    -Titulo Original : 3mm and 5mm LED Lights Emitting Diodes Assortment Set Kit for Arduino Bright White Red Blue Green Yellow, 300-Pack -Fabricante : CO RODE-Descripcion Original: Compatible con Compatible with: Suunto 3 Fitness, Suunto 5, Traverse, Kailash, Spartan Trainer, Ambit 1 2 3 Smartwatch...
  • Adafruit (PID 3387) 9-DOF Accel/Mag/Gyro+Temp Breakout Board
    Precio:  $2,839.00

    Adafruit (PID 3387) 9-DOF Accel/Mag/Gyro+Temp Breakout Board

    -Titulo Original : Adafruit (PID 3387) 9-DOF Accel/Mag/Gyro+Temp Breakout Board - LSM9DS1-Fabricante : ADAFRUIT-Descripcion Original: LSM9DS1 9-DOF Accel/Mag/Gyro+Temp Breakout Board // Accelerometer: ±2/±4/±8/±16 g (no ±6 g range). // Magnetometer: ±4/±8/±12/±16 gauss ranges. // Gyroscope: ±245/±500/±2000 dps ranges. // i2c and SPI interface. 3-5VDC // Add motion, direction and orientation sensing to your Arduino project with this all-in-one 9-DOF sensor. Inside the chip are three sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The other is a 3-axis magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. The third is a 3-axis gyroscope that can measure spin and twist. By combining this data you can REALLY orient yourself. Characteristics: Accelerometer: ±2/±4/±8/±16 g (no ±6 g range). Magnetometer: ±4/±8/±12/±16 gauss ranges. Gyroscope: ±245/±500/±2000 dps ranges. The breakout board version of this sensor has both I2C and SPI interfaces. Attaching it to the Arduino is simple, power Vin and GND with 3-5VDC, and wire up I2C data on SCL and SDA, and you're ready to go! More advanced users can use SPI, our library has support for both. The breakout comes fully assembled and tested, with some extra header so you can use it on a breadboard. Four mounting holes make for a secure connection, and we put the popular power+data pins on one side, and the interrupt pins on the other side for a nice & compact breakout...
  • Teensy 3.6 (without Pins)
    Precio:  $5,509.00

    Teensy 3.6 (without Pins)

    -Titulo Original : Teensy 3.6 (Without Pins)-Fabricante : PJRC-Descripcion Original: 180 MHz ARM Cortex-M4 with Floating Point Unit // 1M Flash, 256K RAM, 4K EEPROM // Microcontroller Chip MK66FX1M0VMD18 // 180 MHz ARM Cortex-M4 with Floating Point Unit 1M Flash, 256K RAM, 4K EEPROM Microcontroller Chip MK66FX1M0VMD18 USB High Speed (480 Mbit/sec) Port 2 CAN Bus Ports 32 General Purpose DMA Channels 22 PWM Outputs 4 I2C Ports 11 Touch Sensing Inputs 62 I/O Pins (42 breadboard friendly) 25 Analog Inputs to 2 ADCs with 13 bits resolution 2 Analog Outputs (DACs) with 12 bit resolution 22 PWM Outputs USB Full Speed (12 Mbit/sec) Port Ethernet mac, capable of full 100 Mbit/sec speed Native (4 bit SDIO) micro SD card port I2S Audio Port, 4 Channel Digital Audio Input & Output 14 Hardware Timers Cryptographic Acceleration Unit Random Number Generator CRC Computation Unit 6 Serial Ports (2 with FIFO & Fast Baud Rates) 3 SPI Ports (1 with FIFO) 4 I2C Ports Real Time Cloc...
  • LOLIN D32 Pro V2.0.0 - WiFi y Bluetooth basado en placa ESP-32 ESP32 Rev1 ESP32-WROVER 16MB Flash 8MB PSRAM MicroPython
    Precio:  $3,399.00

    LOLIN D32 Pro V2.0.0 - WiFi y Bluetooth basado en placa ESP-32 ESP32 Rev1 ESP32-WROVER 16MB Flash 8MB PSRAM MicroPython

    -Titulo Original : Genuine/Original LOLIN D32 Pro V2.0.0 - WiFi & Bluetooth Board Based ESP-32 ESP32 Rev1 ESP32-WROVER 16MB Flash 8MB PSRAM MicroPython-Fabricante : STAR MARS-Descripcion Original: Genuine/Original LOLIN D32 Pro V2.0.0 16MB Flash 8MB PSRAM // New Logo - LOLIN (previous WeMos) // Upgraded from previous version (V1.1.0,V1.0.0) // Further optimize the circuit // Compatible with MicroPython, Arduino, Nodemcu // Capacity:  |  Color: Espressif official ESP32-WROVER module Lastest ESP32 Version: REV1 16MB FLASH 8MB PSRAM Lithium battery interface, 500mA Max charging current LOLIN I2C port LOLIN TFT port TF (Micro SD) Card slot, support SPI mode. Compatible with Arduino, MicroPython Default firmware: lastest MicroPython Board Power Supply (USB):5VSupported Batteries            Lipo Battery 3.7VOperating Voltage                3.3VDigital I/O Pins                     22Analog Input Pins                6 (VP, VN, 32, 33, 34, 35)Analog Output Pins             2 (25, 26)LED_BUILTIN                     5Clock Speed(Max)              240MhzFlash                                  4M bytesNote: All of the IO pins run at 3.3V.1x Genuine/Original LOLIN D32 Pro V2.0.0 Development Board 16MB Flash 8MB PSRA...
  • Adafruit Electret Microphone Amplifier - Max4466 With...
    Precio:  $1,639.00

    Adafruit Electret Microphone Amplifier - Max4466 With...

    -Titulo Original : Adafruit Electret Microphone Amplifier - MAX4466 with Adjustable Gain [ADA1063]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1063 // Stock Type: Sensors >> Sound/Noise // In Stock & Ready to Ship // Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use the Maxim MAX4466, an op-amp specifically designed for this delicate task! The amplifier has excellent power supply noise rejection, so this amplifier sounds really good and isn't nearly as noisy or scratchy as other mic amp breakouts we've tried! This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. On the back, we include a small trimmer pot to adjust the gain. You can set the gain from 25x to 125x. That's down to be about 200mVpp (for normal speaking volume about 6 away) which is good for attaching to something that expects 'line level' input without clipping, or up to about 1Vpp, ideal for reading from a microcontroller ADC. The output is rail-to-rail so if the sounds gets loud, the output can go up to 5Vpp! Using it is simple: connect GND to ground, VCC to 2.4-5VDC. For the best performance, use the quietest supply available (on an Arduino, this would be the 3.3V supply). The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled). If the audio equipment you're using requires AC coupled audio, place a 100uF capacitor between the output pin and the input of your device. If you're connecting to an audio amplifier that has differential inputs or includes decoupling capacitors, the 100uF cap is not required. The output pin is not designed to drive speakers or anything but the smallest in-ear headphones - you'll need an audio amplifier (such as our 3.7W stereo amp) if you want to connect the amp directly to speakers . If you're connecting to a microcontroller pin, you don&...
  • W65C134SXB - Sistema de desarrollo de ingeniería WDC Xxcelr8r - Placa con la microcomputadora W65C134S de 8 bits
    Precio:  $8,049.00

    W65C134SXB - Sistema de desarrollo de ingeniería WDC Xxcelr8r - Placa con la microcomputadora W65C134S de 8 bits

    -Titulo Original : W65C134SXB - WDC Xxcelr8r Engineering Development System - Board featuring the W65C134S 8-bit Microcomputer-Fabricante : The Western Design Center, Inc.-Descripcion Original: 8-bit 6502 based Microcomputer (3.6864 MHz) on board with WatchDog Timer, 1x UART, IO, Serial Interface Bus // 40 pin XBUS Expansion Connector with Address, Data, and Microprocessor control signals // 3x8 IO Expansion Port Connectors // Serial Interface Bus connectors for Token Passing Local Area Network // Powered by USB (5V) for ease of connection to PC, MAC, Android Smartphone // The W65C134SXB is based around the W65C134S which is a feature rich 8–bit microcomputer based on the W65C02 microprocessor with an advanced (originally designed for life support) Serial Interface Bus (SIB) token passing local area network for multi–W65C134S microcontroller systems. The full external memory bus (8–bit data and 16–bit address bus) allows for flexible system design. This MCU has an embedded debug monitor ROM with computer terminal interface a library of routines that can help you reduce development time and optimized for designing human exo and endo robotic functions, for examples of microcontrollers that can be developed from the W65C134S microcomputer. Designed and Developed in the US...
  • MELIFE 2 Pack ESP32 ESP-32S Placa de desarrollo 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontrolador Procesador
    Precio:  $2,779.00

    MELIFE 2 Pack ESP32 ESP-32S Placa de desarrollo 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontrolador Procesador

    -Titulo Original : MELIFE 2 Pack ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA for Arduino IDE-Fabricante : MELIFE-Descripcion Original: 2 PACK 2.4GHz Dual Mode WiFi + Bluetooth Development Board // Ultra-Low power consumption, works perfectly with the Arduino IDE // Support LWIP protocol, Freertos // SupportThree Modes: AP, STA, and AP+STA // ESP32 is a safe, reliable, and scalable to a variety of applications // Color: ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module. The entire solution takes up the least amount of printed circuit board area. This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology, power and RF properties best, which is safe, reliable, and scalable to a variety of applications. High performance-price ratio Small volume, easily embeded to other products Strong function with support LWIP protocol, Freertos Supporting three modes: AP, STA, and AP+STA Supporting Lua program, easily to develop https://github.com/espressif/arduino-esp32 https://github.com/nodemcu/nodemcu-firmware/tree/dev-esp32 https://github.com/Nicholas3388/LuaNode If it cann't get bluetooth working? Using Node32s as the Board selection. To reference GPIO pins in code use just the number, for example digitalWrite(13, HIGH) sets GPIO13 high. The built-in LED to GPIO2. 2 x ESP3...
  • Arduino Kit ELEGOO (1ERP6WL4)
    Precio:  $2,409.00

    Arduino Kit ELEGOO (1ERP6WL4)

    -Titulo Original : ELEGOO Electronic Fun Kit Bundle with Breadboard Cable Resistor, Capacitor, LED, Potentiometer (235 Items) for Arduino, Respberry Pi-Fabricante : ELEGOO-Descripcion Original: This kit has all the components you need to start your projects for Arduino or Raspberry Pi and other microcontrollers // With more than 200Pcs components // With a precision potentiometer, better quality, power supply module and breadboard // With jumper wire and f-m DuPont wire // Not including the controller board // Color: Established in 2011, ELEGOO is a thriving technology company dedicated to open-source hardware research & development, production and marketing. Our own Quality Management Team will secure the premium quality of our products and we would like to receive your valuable suggestions for our products and make your idea come true listing: 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs 400 tie-points Breadboard 1pcs 65 Jumper Wire 20pcs Female-to-male DuPont Wire 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs Precision Potentiometer 1pcs IC 4N35 1pcs IC 74HC595 5pcs Diode Rectifier (1N4007) 5pcs NPN Transistor (PN2222) 2pcs Photoresist or 1pcs Thermistor 10pcs Button (small) 10pcs White LED 10pcs Yellow LED 10pcs Blue LED 10pcs Green LED 10pcs Red LED 1pcs RGB LED 2pcs Pin header (40pin) 10pcs 22pf Ceramic Capacitor 10pcs 104 Ceramic Capacitor 5pcs Electrolytic Capacitor (10UF 50V) 5pcs Electrolytic Capacitor (100UF 50V) 10pcs Resistor (10R) 10pcs Resistor (100R) 30pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M)...
  • Resolución 200x200 Módulo de pantalla de tinta electrónica de 1.54 pulgadas Papel electrónico electrónico Sreen con cont
    Precio:  $3,829.00

    Resolución 200x200 Módulo de pantalla de tinta electrónica de 1.54 pulgadas Papel electrónico electrónico Sreen con cont

    -Titulo Original : 200x200 Resolution 1.54inch E-Ink Display Module Electronic E-paper Sreen with Embedded Controller SPI Interface Support Partial Refresh for Raspberry Pi/Arduino/Nucleo-Fabricante : Waveshare-Descripcion Original: 200x200, 1.54inch E-Ink display module, SPI interface // Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. // No backlight, keeps displaying last content for a long time even when power down // Ultra low power consumption, basically power is only required for refreshing // Development Resources: www.waveshare.com/wiki/1.54inch_e-Paper_Module // Color: 200x200, 1.54inch E-Ink display module, SPI interface Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Operating voltage: 3.3V Interface: 3-wire SPI, 4-wire SPI Outline dimension: 48mm × 33mm Display size: 27.6mm × 27.6mm Dot pitch: 0.138 × 0.138 Resolution: 200 × 200 Display color: black, white Grey level: 2 Partial refresh time: 0.3s Full refresh time: 2s Refresh power: 26.4mV(typ.) Standby power: Viewing angle: >170° 1.54inch e-Paper Module x1 XH2.54 20cm 8Pin x1 100% original gurantee, technical support always available...
  • Case Para Raspberry Pi 4 Con Ventilador Y Disipadores
    Precio:  $2,179.00

    Case Para Raspberry Pi 4 Con Ventilador Y Disipadores

    -Titulo Original : MazerPi Raspberry Pi 4 Case, Raspberry Pi Case with Cooling Fan, Raspberry Pi 4 Heatsink for Raspberry Pi 4 Model B, Pi 4B, Pi 4-Fabricante : MazerPi -Descripcion Original: 1. Esta funda protectora está diseñada específicamente para el Raspberry Pi 4 Modelo B 2. La caja es de dos piezas moldeada por inyección y está hecha de material ABS, soporte de nueva versión Ventilador instalado 3. Proporciona la mejor protección / accesibilidad disponible para su placa Raspberry Pi. 4. Este estuche es fácil de instalar y tiene buena ventilación. Embalaje incluido: 1x caso 1x ventilador de enfriamiento 1x juegos de disipador térmico 1x juegos de tornillo...
  • Hiletgo Esp-wroom-32 Esp32 Esp-32s Placa De Desarrollo 2.4ghz Dual-mode Wifi + Bluetooth Dual Cores Microcontrolador Pro
    Precio:  $2,079.00

    Hiletgo Esp-wroom-32 Esp32 Esp-32s Placa De Desarrollo 2.4ghz Dual-mode Wifi + Bluetooth Dual Cores Microcontrolador Pro

    -Titulo Original : HiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE-Fabricante : HILETGO-Descripcion Original: 2.4GHz Dual Mode WiFi + Bluetooth Development Board // Ultra-Low power consumption, works perfectly with the Arduino IDE // Support LWIP protocol, Freertos // SupportThree Modes: AP, STA, and AP+STA // ESP32 is a safe, reliable, and scalable to a variety of applications // The ESP32 integrated with Antenna switches, RF Balun, power amplifiers, low-noise amplifiers, filters, and management modules, and the entire solution occupies the least area of PCB. 2.4 GHz Wi-Fi plus Bluetooth dual-mode chip, with TSMC Ultra-low power consumption 40nm technology, power dissipation performance and RF performance is the best, safe and reliable, easy to extend to a variety of applications. https://github.com/espressif/arduino-esp32 https://github.com/nodemcu/nodemcu-firmware/tree/dev-esp32 1 * ESP-WROOM-32 ESP32 ESP-32S Development Board Using Node32s as the Board selection. To reference GPIO pins in code use just the number, for example digitalWrite(13, HIGH) sets GPIO13 high. The built-in LED to GPIO2...
  • Arduino Kit ELEGOO (1ERPEMAC)
    Precio:  $3,309.00

    Arduino Kit ELEGOO (1ERPEMAC)

    -Titulo Original : ELEGOO Upgraded Electronics Fun Kit w/Power Supply Module, Jumper Wire, Precision Potentiometer, 830 tie-Points Breadboard for Arduino, STM32-Fabricante : ELEGOO-Descripcion Original: The highest cost performance kit with more than 300pcs components // Datasheet and tutorial is available to download from our official website // Better improvement on product quality and durablity // You will need a UNO R3 board to follow our tutorial and if you don't have one you can search B01EWOE0UU on Amazon // Safe and secure pakcage: all components are well-stored in a sturdy plastic box // Color: Arduino is an open-source hardware and software platform where users can create tremendous electronic projects using programming via Arduino IDE, which users need to download directly from Arduino.cc. Since Arduino is open source, ELEGOO got the chance to make the same UNO R3 board which is fully compatible with Arduino. The Upgraded Electronic Fun Kit is used as an extension kit for ELEGOO UNO R3 board or MEGA 2560 board and if you dont have one you can buy one from our store. Component listing: 1pcs Power Supply Module 1pcs 830 tie-points Breadboard 1pcs 65 Jumper Wire 140pcs Solderless Jumper Wire 20pcs Female-to-male Dupont Wire 2pcs Pin header (40pin) 1pcs Precision Potentiometer 2pcs Photoresistor 1pcs Thermistor 5pcs Diode Rectifier (1N4007) 5pcs NPN Transistor (PN2222) 1pcs IC 4N35 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Passive Buzzer 10pcs Button (small) 10pcs 22pf Ceramic Capacitor 10pcs 104 Ceramic Capacitor 5pcs Electrolytic Capacitor (10UF 50V) 5pcs Electrolytic Capacitor (100UF 50V) 10pcs White LED 10pcs Yellow LED 10pcs Blue LED 10pcs Green LED 10pcs Red LED 1pcs RGB LED 10pcs Resistor (10R) 10pcs Resistor (100R) 30pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M...
  • Adafruit 2028 Assembled Pi T-Cobbler Plus - GPIO Breakout...
    Precio:  $2,099.00

    Adafruit 2028 Assembled Pi T-Cobbler Plus - GPIO Breakout...

    -Titulo Original : Adafruit 2028 Assembled Pi T-Cobbler Plus - GPIO Breakout for-Fabricante : ADAFRUIT-Descripcion Original: 73mm x 20mm x 11mm / 2.9" x 0.8" x 0.4" // Height with pins: 19mm / 0.8" // Width at top of T: 58mm / 2.3" // Assembled Pi T-Cobbler Plus - GPIO Breakout for Raspberry Pi This is the assembled version of the Pi T-Cobbler Plus. It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2,Pi 3! (Any Pi with 2x20 connector) The Raspberry Pi has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. Now is a good time to upgrade your set up and accessorize using all of the 40 pins. That's why we now carry the Adafruit's Assembled Pi T-Cobbler Plus (Breakout + Cable) for Raspberry Pi. This Cobbler is in a fancy T-shape, which is not as compact, but is a little easier to read the labels. The T-Cobbler Plus is an add on prototyping board specifically designed for the 2x20 connector-type Raspberry Pi and can break out all the power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This set will make cobbling together prototypes with the Pi that much easier. Each order comes with a 40 pin ribbon cable and assembled T-Cobbler Plus. You can plug the 40-pin GPIO cable between the Pi computer and the T-Cobbler breakout. The T-Cobbler can plug into any solderless breadboard. The T-Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it. Designed for use with any 2x20 connector Raspberry Pi. No soldering required! The Raspberry Pi, solderless breadboard, bread boarding wires, cables, components, power supply, etc are not included! We stock many of those items, so check those out as well! Specifications 73mm x 20mm x 11mm / 2.9 x 0.8 x 0.4 Height with pins: 19mm / 0.8 Width at top of T: 58mm / 2.3 Weight: 14g EagleCAD PCB files on GitHub Fritzing object in Adafruit Fritzing library . Made in China...
  • M5StackPSRAM 2.0! FIRE IoT Kit Dual Core ESP32 16M-Flash + 4M-PSRAM Placa de desarrollo MIC / BLE MPU9250 de Micropython
    Precio:  $9,629.00

    M5StackPSRAM 2.0! FIRE IoT Kit Dual Core ESP32 16M-Flash + 4M-PSRAM Placa de desarrollo MIC / BLE MPU9250 de Micropython

    -Titulo Original : M5Stack New PSRAM 2.0! FIRE IoT Kit Dual Core ESP32 16M-Flash+4M-PSRAM Development Board MIC/BLE MPU9250 of Micropython (FIRE)-Fabricante : M5STACK-Descripcion Original: Brand Name:M5Stack Bundle:None Camera Equipped:No State of Assembly:Almost Ready Compatibility:All Compatible Model Number:M5Stack FIRE IoT Starter Kit Flash:16M Flash + 4M PSRAM Input:5V@500mA Interface:Type-C*1, Grove(I2C+I/O+UART), Pogo Pin*1 LCD:2 inch, 320*210 Colorful TFT LCD, ILI9342 Speaker:1W-0928 MIC:MEMS Analog BSBE3729 Microphone LED:SK6812 3535 RGB LED*10 9DOF:MPU6050+MAG3110 Battery:550mAh 3.7V inside Op.Temp:32'F to 104'F (0'C to 40'C...
  • Adafruit (PID 3201) Ethernet FeatherWing
    Precio:  $4,539.00

    Adafruit (PID 3201) Ethernet FeatherWing

    -Titulo Original : Adafruit (PID 3201) Ethernet FeatherWing-Fabricante : ADAFRUIT-Descripcion Original: WizNet WIZ5500 chip // The Arduino Ethernet2 library works great with this board // Communicates over SPI plus a single CS pin // RJ-45 jack with activity and link lights // Wireless is wonderful, but sometimes you want the strong reliability of a wire. If your Feather board is going to be part of a permanent installation, this Ethernet FeatherWing will let you add quick and easy wired Internet. Just plug in a standard ethernet cable, and run the Ethernet2 library for cross-platform networking. Ethernet is a tried-and-true networking standard. It's supported by every hub and switch, and because there's a physical connection you don't have to noodle around with SSIDs, passwords, authentication schemes or antennas. It works great with any of our Feathers, the WIZ5500 chip communicates over SPI plus a single CS pin. The Arduino Ethernet2 library works great, and within a few seconds after connecting, will do the DHCP setup for you. As a nice extra, the RJ-45 jack has both link and activity lights that will light/blink to let you know the current connection status. This Wing does not support active Power-over-Ethernet (PoE), but you can easily hook up a passive PoE configuration with a passive injector, a 5V power adapter, and a 2.1mm to MicroUSB cable. See the tutorial page for more details Each order comes with one assembled and tested Ethernet FeatherWing, plus some header. You will need to solder in the header yourself but its a quick task...
  • Teensy   2.0
    Precio:  $5,419.00

    Teensy 2.0

    -Titulo Original : Teensy++ 2.0-Fabricante : PJRC-Descripcion Original: 8-Bit AVR Processor (AT90USB1286) // 128K Flash Memory, 8K RAM, 4K EEPROM // USB Can Emulate Any Type of Device // Single Pushbutton Programming // Arduino Compatible // The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy++ breaks out all of the IO available on the AT90USB1286 to breadboard-friendly 0.1 spaced headers so you can hook up a load of peripherals.The Teensy++ comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program the Teensy in your favorite IDE using C you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!  2 x 0.7 (50.8 x 17.8 mm)8-Bit AVR Processor (AT90USB1286)128K Flash Memory, 8K RAM, 4K EEPROMUSB Can Emulate Any Type of DeviceSingle Pushbutton ProgrammingArduino Compatible8 Analog Inputs46 Digital I/O Pins9 PWM outputsSPI and I2...
  • Arduino Vidor Mkr 4000 - Abx00022
    Precio:  $13,649.00

    Arduino Vidor Mkr 4000 - Abx00022

    -Titulo Original : ARDUINO Vidor 4000 [ABX00022]-Fabricante : Vidor-Descripcion Original: SAMD21 + INTEL FPGA (16k elementos lógicos) Salida mini HDMI / entrada de cámara MIPI Ideal para: Industria 4.0, domótica, video, aeroespacial, telecomunicaciones. Parte de la familia de placas Arduino Maker para dispositivos IoT, fácil de configurar con el software Arduin...
  • Adafruit Barcode Reader/Scanner Module - CCD Camera - USB...
    Precio:  $12,429.00

    Adafruit Barcode Reader/Scanner Module - CCD Camera - USB...

    -Titulo Original : Adafruit Barcode Reader/Scanner Module - CCD Camera - USB Interface [ADA1203]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1203 // Stock Type: Sensors >> Readers/Scanners // In Stock & Ready to Ship // Decode nearly any kind of 1D (striped) barcode in your project using this adorable compact barcode scanner. We've looked all over for a small, light, low-power module that can be easily integrated. This OEM scanner has a little camera inside that takes 100 photos per second, instead of using a 'scanning mirror' assembly. This means its less likely to get damaged or out of alignment. Please note: this is a camera-based not laser-based scanner - you'll have to hold it farther away than you usually do for laser-mirror scanners! Try 10cm/4 or more distance with the button held down. This all in one module is the simplest we could find. On the end is just a USB cable, plug it into any computer (or microcomputer such as BeagleBone, Raspberry Pi, etc) and it will show up as an HID keyboard. When a barcode is scanned, the raw data is decoded, parity-checked and spit out as if they were typed on a keyboard. Like all barcode scanners, you can do some basic configuration by powering it up and 'scanning' in special barcodes in the manual. For example you can change the delay between 'typed' characters, or what the terminating character, if any, should be. Check the download tab for the printable manual. If you'd like to set up the scanner to be different than the default, print it out on plain white paper and scan each 'configuration' code. The config will be saved to non-volatile memory so you only have to do it once. This reader will read a wide variety of barcode standards. The most common ones such as CODE39 and UPC are supported out of the box. To enable some of the rarer standards, check the manual as you may have to 'scan configure' to enable it. Barcode Reader/Scanner Modules ( 5:00 ...
  • Feetech Fs90r Micro Servo De Rotacion Continua Con Rueda Xs
    Precio:  $4,879.00

    Feetech Fs90r Micro Servo De Rotacion Continua Con Rueda Xs

    -Titulo Original : Geekstory Feetech FS90R 360 Degree Continuous Rotation Micro Servo with RC Wheel Tire (4 Pack) -Fabricante : Geekstory -Descripcion Original: Recibirá 4pcs Feetech 360 grados de rotación continua servo y 4pcs rueda. Este servo de pies tiene certificado CE y ROHS. La velocidad de operación es 110RPM (4.8V), 130RPM (6V), pero puede cambiar el pwm para cambiar la velocidad del servo, para hacerlo más lento o más rápido Servo de par de torsión: 1.3kg.cm/18.09oz.in(4.8V), 1.5kg.cm/20.86oz.in(6V). Esta rueda de plástico negro se ajusta a presión en el eje del engranaje de salida FS90R y es fácil de hacer una buena solución de manejo para robots pequeños...
  • M5Stack Official CardKB Mini unidad de teclado MEGA328P Grove I2C USB ISP Programmer para ESP32 Arduino Development Boar
    Precio:  $2,609.00

    M5Stack Official CardKB Mini unidad de teclado MEGA328P Grove I2C USB ISP Programmer para ESP32 Arduino Development Boar

    -Titulo Original : RF Wireless Transmission Module 868 MHZ LoRa Spread-Spectrum Communication, 20dBm 100mW Measured Distance 3000M UART SX1276 Chip RF Receiver Transmitter, Super Anti-Interference Performance-Fabricante : MAKERFOCUS-Descripcion Original: User manual: https://drive.google.com/open?id=1boFZAoJ0MlykF7u_zhK6QC6vdvs94Zgo; This is a 100mW UART transparent and transmission wireless transceiver module, operates at 862893MHz, based on original imported RFIC SX1276 from SEMTECH. The module integrates the function of receiving and sending information, adopts LoRa spread-spectrum technology, which means the transmitting distance and penetration capacity are one time more than that of traditional Frequency-shift Keying // Using the FEC forward error correction algorithm, it can actively correct the interfered data packets, making the communication distance farther, the anti-interference ability stronger, and having the air wake-up function. LoRa Spread-spectrum Communication Super Anti-interference Performance: The RF Wireless Transmission Module adopts LoRa spread-spectrum technology, which means the transmitting distance and penetration capacity are one time more than that of traditional Frequency-shift Keying // Low Power Consumption FEC Forward Error Correction: Working on radio, applicable for battery powered applications. Using the FEC forward error correction algorithm, it can actively correct the interfered data packets, making the communication distance farther, the anti-interference ability stronger, and having the air wake-up function.Professional PCB Design Impedance Control: Reduced the transmission reflection of high frequency signals and improved the effective of signal transmission // Transmission Modes: The users can freely control the disuse and shutdown of the module. The wireless transceiver module support different sleep and stand-by modes. Energy consumption and performance are highly improved. There are four transmission modes: Transparent transmission (Point to Point), transparent transmission (Broadcasting), broadcast transmission and fixed transmission // High Quality Guaranty and Various Applied Occasions: The 868 MHz LoRa wireless transmission module has acquired CE Certificate, FFC Certificate and ROHS Certificate // Color: Mode 0: General mode: M0=0, M1=0;Low power consumptionOccasion (Most occasions) Mode 1:Wake mode:M0=1, M1=0; Using low power consumption, it's the mode of the transmitting party, automatically adding the wake-up code Mode 2:Power saving mode:M0=0, M1=1; Using low power consumption, it's the mode of the receving party, cannottransmit in this mode. Mode 3:Sleep mode:M0=1, M1=1; Using low power consumption, it's the mode of the receving party, cannottransmit in this mode. The module is in a sleep state and can accept parameter setting commands. Chip: SX1276 Model: E32-868T20D Transmit power: 100mW Communication Distance: 3000m RF connector: SMA-K Working frequency:862~893 MHz (Default: 868MHz) Transmitting power:10~20 dBm, Default: 20dBm Receiving sensitivity: -146 dBm Air data rate: 0.3k~19.2kbps(Default: 2.4kbps) Size: 21 * 36 mm(Without SMA) Antenna type: SMA-K (Not inclueded) Communication interface: UART (Baud rate: 1200~115200, default: 9600) Buffer: 512 bytes buffer (Automatically sub-packaging with 58 bytes per package) 1 * 868 MHZ UART SX1276 LoRa RF Receiver Transmitte...
  • Cable Usb 2.0 A Male To B Male 28/24awg 1.84mts Monoprice
    Precio:  $1,189.00

    Cable Usb 2.0 A Male To B Male 28/24awg 1.84mts Monoprice

    -Titulo Original : Monoprice 6-Feet USB 2.0 A Male to B Male 28/24AWG Cable-Fabricante : Monoprice-Descripcion Original: Outer size: about 110×95mm Inner siize:about 60×40mm Fit:Sony MDR-CD350 mdr-cd450 mdr-cd550 Sony mdr-v900 hd mdr-v600 headphones ...
  • SMAKN 5V a 3.3V, 3.3V a 5V Adaptador de módulo convertidor de nivel de UIC 4 vías para Arduino
    Precio:  $1,239.00

    SMAKN 5V a 3.3V, 3.3V a 5V Adaptador de módulo convertidor de nivel de UIC 4 vías para Arduino

    -Titulo Original : SMAKNÂ 5V to 3.3V, 3.3V to 5V IIC Uart Level Converter Module Adapter 4 Way for Arduino-Fabricante : SMAKN-Descripcion Original: Four MOS tube achieve the four road 3 v and 5 v level bidirectional conversion. // Power input tape counter-attack joint protection, integrated 3.3 VLDO, and can provide is not more than 150 mA current. // With power light, work or not be clear at a glance. // Can realize UART, IIC, 1 - wire, SPI bus signals such as bidirectional conversion. // *Four MOS tube achieve the four road 3 v and 5 v level bidirectional conversion. *Power input tape counter-attack joint protection, integrated 3.3 VLDO, and can provide is not more than 150 mA current. *With power light, work or not be clear at a glance. *Can realize UART, IIC, 1 - wire, SPI bus signals such as bidirectional conversion. *Size:16mm*16mm. Feedback: We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem.Thank you very much...
  • HiLetgo ESP-WROOM-32 ESP32 ESP-32S Placa de desarroll (4J7N)
    Precio:  $2,959.00

    HiLetgo ESP-WROOM-32 ESP32 ESP-32S Placa de desarroll (4J7N)

    -Titulo Original : ESP32 Camera Module(Arduino Camera, Raspberry Pi Camera), OV2640 2 Mega Pixels Camera, with Type C Port and 3D WiFi Antenna, Mini Camera Board for Arduino, Raspberry Pi 3B/3B+ and Pi 2B+ IOT DIY-Fabricante : MAKERFOCUS-Descripcion Original: ★User Guide: https://docs.m5stack.com/#/en/quick_start/m5camera/m5camera_quick_start; ★IDF development environment, ★Demo: github.com/m5stack/esp32-cam-demo; ★Datasheet:https://github.com/m5stack/esp32-cam-demo/blob/m5cam/M5CAM-ESP32-A1-POWER.pdfMPU6050. // ★M5Stack ESP32 Camera: The M5Stack ESP32 Camera is a tiny module based on ESP32 chip and OV2640 sensor. You can program it through the ESP-IDF. The board reserved the MPU6050,BME280 and an analog MIC.This module with a IP5306 IC chip and it can be used with lithium battery (Standard voltage: 3.7V4.2V). // ★OV2640 Camera Module: The camera is CMOS camera, CMOS size: 1/4", field of view : 65 degree, maxmium Pixel: 200M pixels (Because of the small RAM, the board can’t obtain it. It can output images up to 800*600 JPEG.) // ★OV2640 Sensor​​​​​​'s Parameter:Standard SCCB interface, compatible with I2C interface;Output Formats(8-bit) is YUV(422/420)/YCbCr422; RGB565/555; 8-bit compressed data; 8-/10-bit Raw RGB data; UXGA/SXGA: 15fps; SVGA: 30fps; CIF: 60fps; Scan Mode: Progressive. // ★For people: Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups, educational groups amd Maker groups. // Color: Dual-core Tensilica LX6 microprocessor Up to 240MHz clock frequency 520kB internal SRAM 4MB Flash memory Integrated 802.11 BGN WiFi transceiver Integrated dual-mode Bluetooth (classic and BLE) Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096) CP2104 USB TTL Standard SCCB interface, compatible with I2C interface Output Formats(8-bit): YUV(422/420)/YCbCr422 RGB565/555 8-bit compressed data 8-/10-bit Raw RGB data Maximum Image Transfer Rate UXGA/SXGA: 15fps SVGA: 30fps CIF: 60fps Scan Mode: Progressive CMOS size: 1/4 Field of View : 78° best sensor resolution: 1600 * 1200 IO voltage: 1.7V-3.3V Analog voltage: 2.5-3.0v (internal LDO powers 1.2V to the core) Power Consumption: TBD Sleep andlt;20μA Temperature Operation: -30°C to 70°C Stable work: 0°C to 50°C Maximum rms rate: 15fps SXGA Sensitivity: 1.3V/(Lux-sec) Signal to noise ratio: 40 dB Dynamic range: 50 dB Scan Mode: Progressive Electronic exposure: Line 1 to Line 1247 Pixel area: 2.2μm x 2.2μm Dark current: 15mV/s at 60°C 1 * EESP32 Module Development Board with OV2640 Camer...
  • Arduino Uno R3 Kit KOOKYE (1EUW843I)
    Precio:  $5,939.00

    Arduino Uno R3 Kit KOOKYE (1EUW843I)

    -Titulo Original : Universal Starter Kits for Arduino Tutorials (UNO R3 Board Included),Graphical Programming Tutorials, NodeMCU IoT Tutorials ( ESP8266 Wifi Modules Not Included )-Fabricante : KOOKYE-Descripcion Original: DETAILED TUTORIAL--This sensor modules in this universal kit not only can be used for arduino( UNO R3 Board Included), but also for raspberry pi and nodemcu esp8266 (Raspberry pi board and nodemcu esp8266 modules not included).You would find the detailed tutorials instruction in our KOOKYE website.Arduino universial kit tutorial:http://kookye.com/?p=1058; NodeMCU ESP8266 wifi kit tutorial:http://kookye.com/?p=3545; // UNIVERSAL ACCESSORIES--You can learn the basic concepts of buttons, resistors, sensors, IR remote control and receivers, how to use sensors to detect environment(i.e. light, temperature), and how to use 74HC595 Shifting Register IC to extend Arduino Digital Ports. // CREATIVE PROJECTS--The kit has 19 projects and 26 items in high quality for the beginners.Every project in this starter kit has detailed circuit graph, step-by-step tutorial and fully-tested Arduino sample codes which can save lots of your research time and speed up your learning progress. // SUPER KITS--This kit walks you through the very basics of using the UNO R3 board in a hands-on way. You'll learn through building several creative projects. Starting from the basics of electronics, to more complex projects, the kit will help you control the physical world with components. // PERFECT FOR BEGINNERS & PROS--This Kit includes the KOOKYE UNO R3 Board (fully compatible with Arduino UNO R3),developed specially for those beginners who are interested in Arduino. You could separately buy a raspberry pi board or nodemcu esp8266 wifi modules separately to continue to learn these universal sensor modules. // 1* KOOKYE UNO R3 Board 24* LED(6* white/Red/Yellow/Green) 1* 8*8 Dot matrix LED display Modules 1* 4-Digit 7 segment LED display modules 1* 1-Digit 7 segment LED display modules 3* Photoressitor Modules 1* Potentionmeter Modules 1* 74HC595 Shifting register 1* I2c display modules(16*2) 1* Stepper Motor+Bridge 1* Piezo Buzzer Modules 1* micro servo motor 1* Tilt Sensor modules 1* DHT11 Humidity sensor modules 1* Temperature sensor modules TMP36 1* Ultrasonic module HC-SR04 1* Obstacle avoidance sensor modules 1* Infrared remote controller and receiver 5* Push buttons 1* Battery snap 1* Acrylic base plate 1* Plastic box 1* Breadboard Resistors: 15* Resistors(200 ohm) 15* Resistors(470 ohm) 15* Resistors(10K ohm) 15* Resistors(1K ohm) Jumper Wires: 49*12cm male-male 4*20cm male-male 4*25cm male-male 8*16cm female-femal...
Mostrar del 1 al 24 (de 137 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]