Arriba

Componentes Electrónicos > Arduino

Mostrar: 
Mostrar del 1 al 24 (de 138 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Arduino Robot Kit Keyestudio (7k6k1dz4)
    Precio:  $13,409.00

    Arduino Robot Kit Keyestudio (7k6k1dz4)

    -Titulo Original : KEYESTUDIO KEYBOT Coding Education Robot for Arduino/Mixly, Graphical Programming Robotics for Kids Age 12+, Stem Education Kids Toys for Christmas-Fabricante : KEYESTUDIO-Descripcion Original: It’s a arduino programming car for 12+ years old children. Improve kids’ science, technology, engineering and mathematics skills while playing. // KEYBOT control board comes with the RJ11 plug, so it is very easy to connect other sensor modules with only one cable. // You can find clear installation guide and sample sketches to configure different functions for this car, such as Line Tracking, Obstacle Avoidance, Bluetooth Controll (Andriod) // Thanks to the arduino is an open-source platform based on flexible hardware and software, you can get hands-on support from KEYESTUDIO and Arduino communities and create more features to its solid and durable metal body // This is high quality arduino building car kit with exquisite packaging, it’s a perfect Christmas present for junior high and high school inventors, hackers, designers, and tinkerers of all levels. //...
  • Adafruit (PID 3200) Teensy 3.x Feather Adapter
    Precio:  $2,029.00

    Adafruit (PID 3200) Teensy 3.x Feather Adapter

    -Titulo Original : Adafruit (PID 3200) Teensy 3.x Feather Adapter-Fabricante : ADAFRUIT-Descripcion Original: Teensy 3.x to Adafruit Feather adapter // Includes 500mA LiPoly charger // 100K resistor divider to monitor the battery voltage connected to A7 // Use multiple Feather add-on boards // Oh man, is this not the best thing ever? You can now use the awesome Teensy 3 with any and all of our FeatherWings or Feather accessories and even get built-in LiPoly charging! This Feather adapter rearranges the pins of a Teensy 3.x to give you the same shape and pinout for our Feathers. We've tested our FeatherWings so far and all are drop-in compatible. It's a great way to take advantage of the Feather ecosystem. Give your Teensy a stepper/DC motor driver, GPS, LED matrix or OLED add-on with ease. With the space left over, we even added in a 500mA LiPoly charger that automatically charges over USB and will switch over to the LiPo when USB is unplugged. There's also a 100K resistor divider for monitoring the battery voltage connected to A7 Comes with one assembled adapter, shorty headers for attaching your Teensy 3, and both standard and stacking headers so you can use your Teensy in a breadboard and even plug a shield on top. Some soldering is required! Teensy 3.x not included...
  • Teensy 3.6 (without Pins)
    Precio:  $6,229.00

    Teensy 3.6 (without Pins)

    -Titulo Original : Teensy 3.6 (Without Pins)-Fabricante : PJRC-Descripcion Original: 180 MHz ARM Cortex-M4 with Floating Point Unit // 1M Flash, 256K RAM, 4K EEPROM // Microcontroller Chip MK66FX1M0VMD18 // 180 MHz ARM Cortex-M4 with Floating Point Unit 1M Flash, 256K RAM, 4K EEPROM Microcontroller Chip MK66FX1M0VMD18 USB High Speed (480 Mbit/sec) Port 2 CAN Bus Ports 32 General Purpose DMA Channels 22 PWM Outputs 4 I2C Ports 11 Touch Sensing Inputs 62 I/O Pins (42 breadboard friendly) 25 Analog Inputs to 2 ADCs with 13 bits resolution 2 Analog Outputs (DACs) with 12 bit resolution 22 PWM Outputs USB Full Speed (12 Mbit/sec) Port Ethernet mac, capable of full 100 Mbit/sec speed Native (4 bit SDIO) micro SD card port I2S Audio Port, 4 Channel Digital Audio Input & Output 14 Hardware Timers Cryptographic Acceleration Unit Random Number Generator CRC Computation Unit 6 Serial Ports (2 with FIFO & Fast Baud Rates) 3 SPI Ports (1 with FIFO) 4 I2C Ports Real Time Cloc...
  • M5Stack Official CardKB Mini unidad de teclado MEGA328P Grove I2C USB ISP Programmer para ESP32 Arduino Development Boar
    Precio:  $2,999.00

    M5Stack Official CardKB Mini unidad de teclado MEGA328P Grove I2C USB ISP Programmer para ESP32 Arduino Development Boar

    -Titulo Original : RF Wireless Transmission Module 868 MHZ LoRa Spread-Spectrum Communication, 20dBm 100mW Measured Distance 3000M UART SX1276 Chip RF Receiver Transmitter, Super Anti-Interference Performance-Fabricante : MAKERFOCUS-Descripcion Original: User manual: https://drive.google.com/open?id=1boFZAoJ0MlykF7u_zhK6QC6vdvs94Zgo; This is a 100mW UART transparent and transmission wireless transceiver module, operates at 862893MHz, based on original imported RFIC SX1276 from SEMTECH. The module integrates the function of receiving and sending information, adopts LoRa spread-spectrum technology, which means the transmitting distance and penetration capacity are one time more than that of traditional Frequency-shift Keying // Using the FEC forward error correction algorithm, it can actively correct the interfered data packets, making the communication distance farther, the anti-interference ability stronger, and having the air wake-up function. LoRa Spread-spectrum Communication Super Anti-interference Performance: The RF Wireless Transmission Module adopts LoRa spread-spectrum technology, which means the transmitting distance and penetration capacity are one time more than that of traditional Frequency-shift Keying // Low Power Consumption FEC Forward Error Correction: Working on radio, applicable for battery powered applications. Using the FEC forward error correction algorithm, it can actively correct the interfered data packets, making the communication distance farther, the anti-interference ability stronger, and having the air wake-up function.Professional PCB Design Impedance Control: Reduced the transmission reflection of high frequency signals and improved the effective of signal transmission // Transmission Modes: The users can freely control the disuse and shutdown of the module. The wireless transceiver module support different sleep and stand-by modes. Energy consumption and performance are highly improved. There are four transmission modes: Transparent transmission (Point to Point), transparent transmission (Broadcasting), broadcast transmission and fixed transmission // High Quality Guaranty and Various Applied Occasions: The 868 MHz LoRa wireless transmission module has acquired CE Certificate, FFC Certificate and ROHS Certificate // Color: Mode 0: General mode: M0=0, M1=0;Low power consumptionOccasion (Most occasions) Mode 1:Wake mode:M0=1, M1=0; Using low power consumption, it's the mode of the transmitting party, automatically adding the wake-up code Mode 2:Power saving mode:M0=0, M1=1; Using low power consumption, it's the mode of the receving party, cannottransmit in this mode. Mode 3:Sleep mode:M0=1, M1=1; Using low power consumption, it's the mode of the receving party, cannottransmit in this mode. The module is in a sleep state and can accept parameter setting commands. Chip: SX1276 Model: E32-868T20D Transmit power: 100mW Communication Distance: 3000m RF connector: SMA-K Working frequency:862~893 MHz (Default: 868MHz) Transmitting power:10~20 dBm, Default: 20dBm Receiving sensitivity: -146 dBm Air data rate: 0.3k~19.2kbps(Default: 2.4kbps) Size: 21 * 36 mm(Without SMA) Antenna type: SMA-K (Not inclueded) Communication interface: UART (Baud rate: 1200~115200, default: 9600) Buffer: 512 bytes buffer (Automatically sub-packaging with 58 bytes per package) 1 * 868 MHZ UART SX1276 LoRa RF Receiver Transmitte...
  • Adafruit I2S MEMS Microphone Breakout - SPH0645LM4H (3421)
    Precio:  $2,189.00

    Adafruit I2S MEMS Microphone Breakout - SPH0645LM4H (3421)

    -Titulo Original : Adafruit I2S MEMS Microphone Breakout - SPH0645LM4H (3421)-Fabricante : ADAFRUIT-Descripcion Original: small, low cost MEMS mic with a range of about 50Hz - 15KHz // there are three digital pins: // The microphone is a single mono element // This I2S MEMS microphone is bottom ported // MEMS mics can detect sound and convert it to voltage // Listen to this good news - we now have a breakout board for a super tiny I2S MEMS microphone. Just like 'classic' electret microphones, MEMS mics can detect sound and convert it to voltage, but they're way smaller and thinner. This microphone doesn't even have analog out, its purely digital. The I2S is a small, low cost MEMS mic with a range of about 50Hz - 15KHz, good for just about all general audio recording/detection. The microphone is a single mono element. You can select whether you want it to be on the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick up two microphones! You can set them up to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage. This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways). Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it up! This microphone is best used with Cortex M-series chips like the Arduino Zero, Feather M0, or single-board computers like the Raspberry P...
  • W65C134SXB - Sistema de desarrollo de ingeniería WDC Xxcelr8r - Placa con la microcomputadora W65C134S de 8 bits
    Precio:  $9,139.00

    W65C134SXB - Sistema de desarrollo de ingeniería WDC Xxcelr8r - Placa con la microcomputadora W65C134S de 8 bits

    -Titulo Original : W65C134SXB - WDC Xxcelr8r Engineering Development System - Board featuring the W65C134S 8-bit Microcomputer-Fabricante : The Western Design Center, Inc.-Descripcion Original: 8-bit 6502 based Microcomputer (3.6864 MHz) on board with WatchDog Timer, 1x UART, IO, Serial Interface Bus // 40 pin XBUS Expansion Connector with Address, Data, and Microprocessor control signals // 3x8 IO Expansion Port Connectors // Serial Interface Bus connectors for Token Passing Local Area Network // Powered by USB (5V) for ease of connection to PC, MAC, Android Smartphone // The W65C134SXB is based around the W65C134S which is a feature rich 8–bit microcomputer based on the W65C02 microprocessor with an advanced (originally designed for life support) Serial Interface Bus (SIB) token passing local area network for multi–W65C134S microcontroller systems. The full external memory bus (8–bit data and 16–bit address bus) allows for flexible system design. This MCU has an embedded debug monitor ROM with computer terminal interface a library of routines that can help you reduce development time and optimized for designing human exo and endo robotic functions, for examples of microcontrollers that can be developed from the W65C134S microcomputer. Designed and Developed in the US...
  • HiLetgo ESP-WROOM-32 ESP32 ESP-32S Placa de desarroll (4J7N)
    Precio:  $3,399.00

    HiLetgo ESP-WROOM-32 ESP32 ESP-32S Placa de desarroll (4J7N)

    -Titulo Original : ESP32 Camera Module(Arduino Camera, Raspberry Pi Camera), OV2640 2 Mega Pixels Camera, with Type C Port and 3D WiFi Antenna, Mini Camera Board for Arduino, Raspberry Pi 3B/3B+ and Pi 2B+ IOT DIY-Fabricante : MAKERFOCUS-Descripcion Original: ★User Guide: https://docs.m5stack.com/#/en/quick_start/m5camera/m5camera_quick_start; ★IDF development environment, ★Demo: github.com/m5stack/esp32-cam-demo; ★Datasheet:https://github.com/m5stack/esp32-cam-demo/blob/m5cam/M5CAM-ESP32-A1-POWER.pdfMPU6050. // ★M5Stack ESP32 Camera: The M5Stack ESP32 Camera is a tiny module based on ESP32 chip and OV2640 sensor. You can program it through the ESP-IDF. The board reserved the MPU6050,BME280 and an analog MIC.This module with a IP5306 IC chip and it can be used with lithium battery (Standard voltage: 3.7V4.2V). // ★OV2640 Camera Module: The camera is CMOS camera, CMOS size: 1/4", field of view : 65 degree, maxmium Pixel: 200M pixels (Because of the small RAM, the board can’t obtain it. It can output images up to 800*600 JPEG.) // ★OV2640 Sensor​​​​​​'s Parameter:Standard SCCB interface, compatible with I2C interface;Output Formats(8-bit) is YUV(422/420)/YCbCr422; RGB565/555; 8-bit compressed data; 8-/10-bit Raw RGB data; UXGA/SXGA: 15fps; SVGA: 30fps; CIF: 60fps; Scan Mode: Progressive. // ★For people: Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups, educational groups amd Maker groups. // Color: Dual-core Tensilica LX6 microprocessor Up to 240MHz clock frequency 520kB internal SRAM 4MB Flash memory Integrated 802.11 BGN WiFi transceiver Integrated dual-mode Bluetooth (classic and BLE) Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096) CP2104 USB TTL Standard SCCB interface, compatible with I2C interface Output Formats(8-bit): YUV(422/420)/YCbCr422 RGB565/555 8-bit compressed data 8-/10-bit Raw RGB data Maximum Image Transfer Rate UXGA/SXGA: 15fps SVGA: 30fps CIF: 60fps Scan Mode: Progressive CMOS size: 1/4 Field of View : 78° best sensor resolution: 1600 * 1200 IO voltage: 1.7V-3.3V Analog voltage: 2.5-3.0v (internal LDO powers 1.2V to the core) Power Consumption: TBD Sleep andlt;20μA Temperature Operation: -30°C to 70°C Stable work: 0°C to 50°C Maximum rms rate: 15fps SXGA Sensitivity: 1.3V/(Lux-sec) Signal to noise ratio: 40 dB Dynamic range: 50 dB Scan Mode: Progressive Electronic exposure: Line 1 to Line 1247 Pixel area: 2.2μm x 2.2μm Dark current: 15mV/s at 60°C 1 * EESP32 Module Development Board with OV2640 Camer...
  • Arduino Kit IDEASPARK (7GPBBY7F)
    Precio:  $4,819.00

    Arduino Kit IDEASPARK (7GPBBY7F)

    -Titulo Original : ESP8266 Weather Station Kit with DHT11 Temperature Humidity BMP180 Atmosphetic Pressure BH1750FVI Light Sensor 0.96 OLED IIC YellowBlue Display for Arduino IDE IoT Starter(Guidance Document Included)-Fabricante : IDEASPARK-Descripcion Original: ✔️The weather station uses the ESP8266-12E to obtain data from the Internet: time of a city, weather data and forecast information for the next 3 days, scrolling on the SSD1306 OLED Display; the device can switch to display data from any city in the world - maybe your relatives or friends live there // ✔️The device uses sensors DHT11, BMP180,BH1750FVI to collect temperature, humidity, Atmosphetic Pressure and light data. The weather station reads data indoor via sensor every 5 seconds and uploads it to the Internet every 60 seconds.You can see real-time data charts from your phone or computer.Of course you can modify the code to implement different functions // ✔️【ESP8266】:CP2102 chip inside,Micro USB,4MB flash,full I/O port and wireless 802.11 supported IOT platform Arduino compatible. 【DHT11】 Sensor: A digital signal output with a calibrated temperature and humidity combined sensor.The simple communication protocol greatly reduces the programming effort required // ✔️【BMP180】:high-precision, small size, ultra-low power 3μA pressure sensor.Its performance excellence, the absolute accuracy of the lowest can reach 0.03hPa.Can directly through the I2C bus connected with a variety of microprocessors.Pressure range: 300 ~ 1100hPa. 【BH1750FVI】:Digital Light intensity Sensor.Direct digital output, complex calculation is omitted, omitting calibration. 【OLED Yellow Blue Display】:0.96" SSD1306 128X64 Yellow&Blue OLED LCD Display with I2C IIC SPI Serial // ✔️We have prepared weather station hardware.And 50M guidance manual,demo code,burning tools,necessary class libraries.Download link label is pasted at the bottom of the packaging box.or contact us on Amazon,we will send download link to you.Package List:1 x Esp8266-12E,1 x DHT11,1 x BMP180,1xBH1750FVI ,1 x OLED Display,2 x breadboard,20 x dupont cable,1 x usb cable // Color: ET: 21:00 PM - 5:30 AM(Second Day) PST: 18:00 PM - 2:30 AM(Second Day) 1) Get weather data from OpenWeathermap at regular intervals, showing the weather of today and weather forecast for next 3 days in any city in the world 2) Read the current temperature, humidity data indoor at regular intervals 3) Regular reading of atmospheric pressure, light intensity data 4) Upload temperature,humidity,atmospheric pressure and intensity of illumination data to thingspeak.com at regular intervals 5) View weather forecast on OLED display and view environmental monitoring chart on thingspeak.com Overview:This manual describes how to make a miniature weather station by Arduino IDE Step 1: Install USB-To-Serial Step 2: Install Arduino IDE for ESP8266 Step 3: Burning Firmware to ESP8266 Step 4: Connecting Components Step 5: Register OpenWeathermap, thingspeak new account Step 6: Import WeatherStation code in the Arduino IDE Step 7: Add Library Step 8: Modify File WeatherStation.ino Step 9: Set the Board and Port again Step 10: Burn code to ESP8266 Step 11: Result Ai-Thinker_ESP8266_DOUT_8Mbit_v1.5.4.1-a_20171130.bin esp8266-weather-station-master.zip(WeatherStation Source Code) esp8266-oled-ssd1306-master.zip json-streaming-parser-master.zip ESP8266Flasher.exe usb-to-serial.rar 1xESP8266-12E 1xDHT11 1xBMP180 1xBH1750FVI 1xOLED Display 1xusb cable 2xbreadboard 20xdupont cabl...
  • Resolución 200x200 Módulo de pantalla de tinta electrónica de 1.54 pulgadas Papel electrónico electrónico Sreen con cont
    Precio:  $4,389.00

    Resolución 200x200 Módulo de pantalla de tinta electrónica de 1.54 pulgadas Papel electrónico electrónico Sreen con cont

    -Titulo Original : 200x200 Resolution 1.54inch E-Ink Display Module Electronic E-paper Sreen with Embedded Controller SPI Interface Support Partial Refresh for Raspberry Pi/Arduino/Nucleo-Fabricante : Waveshare-Descripcion Original: 200x200, 1.54inch E-Ink display module, SPI interface // Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. // No backlight, keeps displaying last content for a long time even when power down // Ultra low power consumption, basically power is only required for refreshing // Development Resources: www.waveshare.com/wiki/1.54inch_e-Paper_Module // Color: 200x200, 1.54inch E-Ink display module, SPI interface Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Operating voltage: 3.3V Interface: 3-wire SPI, 4-wire SPI Outline dimension: 48mm × 33mm Display size: 27.6mm × 27.6mm Dot pitch: 0.138 × 0.138 Resolution: 200 × 200 Display color: black, white Grey level: 2 Partial refresh time: 0.3s Full refresh time: 2s Refresh power: 26.4mV(typ.) Standby power: Viewing angle: >170° 1.54inch e-Paper Module x1 XH2.54 20cm 8Pin x1 100% original gurantee, technical support always available...
  • Pjrc Teensy 3.2 (sin Pins)
    Precio:  $5,649.00

    Pjrc Teensy 3.2 (sin Pins)

    -Titulo Original : PJRC Teensy 3.2-Fabricante : PJRC -Descripcion Original: Manufacturer: Ricoh // Color: RICOH CYAN TONER CARTRIDGE FOR USE IN MPC6501SP MPC7501SP ESTIMATED YIELD 21,600 PAGE...
  • Nano Board Atmega328p 5v 16m Micro-controller Arduino Ide
    Precio:  $2,999.00

    Nano Board Atmega328p 5v 16m Micro-controller Arduino Ide

    -Titulo Original : LAFVIN Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board for Arduino (Nano x 3 with USB Cable)-Fabricante : LAFVIN-Descripcion Original: Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL. // LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system. // Works the same as original Nano, runs perfectly on Arduino IDE. // Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power. // LAFVIN Nano CH340 controller is a compact board similar to the UNO, smaller and breadboard-friendly than Diecimila. //...
  • Lattice Fpga Ice40hx1k-stick-evn Ice Stick Evaluation Board
    Precio:  $18,759.00

    Lattice Fpga Ice40hx1k-stick-evn Ice Stick Evaluation Board

    -Titulo Original : LATTICE SEMICONDUCTOR ICE40HX1K-STICK-EVN iCE Stick Evaluation Board for the iCE40HX1K FPGA -Fabricante : LATTICE SEMICONDUCTOR-Descripcion Original: USB thumb drive form factor iCE40HX-1k on board 2 x 6 position Digilent Pmod™ connector for other peripheral connections FTDI 2232H USB device allows iCE device programming and UART interface to a PC Vishay TFDU4101 IrDA transceiver Five user LEDs Discera 12 Mhz MEMS oscillator Micron 32 Mbit N25Q32 SPI flash USB connector provides the power supply 16 LVCMOS/LVTTL (3.3 V) digital I/O connections on 0.1” through-hole connections ...
  • Adafruit [3527 PiOLED - 128x32 Monochrome OLED Add-on for...
    Precio:  $4,559.00

    Adafruit [3527 PiOLED - 128x32 Monochrome OLED Add-on for...

    -Titulo Original : Adafruit [3527 PiOLED - 128x32 Monochrome OLED Add-on for Raspberry Pi-Fabricante : ADAFRUIT-Descripcion Original: If you're looking for the most compact li'l display for a Raspberry Pi (most likely a Pi Zero) project, this might be just the thing you need! The Adafruit 128x32 PiOLED is your little OLED pal, ready to snap onto any and all Raspberry Pi computers, to give you a little display. The PiOLED comes with a monochrome 128x32 OLED, with sharp white pixels. The OLED uses only the I2C pins so you have plenty of GPIO connections available for buttons, LEDs, sensors, etc. It's also nice and compact so it will fit into any case. These displays are small, only about 1 diagonal, but very readable due to the high contrast of an OLED display. This screen is made of 128x32 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness! Using the display is very easy, we have a Python library for the SSD1306 chipset. Our example code allows you to draw images, text, whatever you like, using the Python imaging library. Our tests showed 30 FPS update rates so you can do animations or simple video. Comes completely pre-assembled and tested so you don't need to do anything but plug it in and install our Python code! Works with any Raspberry Pi computer, including the original Pi 1, B+, Pi 2, Pi 3 and Pi Zero...
  • 100 unidades luces led 5 mm azul (luz color azul)
    Precio:  $1,599.00

    100 unidades luces led 5 mm azul (luz color azul)

    -Titulo Original : MCIGICM Blue 5mm LED Light Diodes, LED Circuit Assorted Kit for Science Project Experiment (100pcs) -Fabricante : MCIGICM -Descripcion Original: Compatible con Compatible with: Suunto 3 Fitness, Suunto 5, Traverse, Kailash, Spartan Trainer, Ambit 1 2 3 Smartwatch...
  • Adafruit (PID 3201) Ethernet FeatherWing
    Precio:  $5,249.00

    Adafruit (PID 3201) Ethernet FeatherWing

    -Titulo Original : Adafruit (PID 3201) Ethernet FeatherWing-Fabricante : ADAFRUIT-Descripcion Original: WizNet WIZ5500 chip // The Arduino Ethernet2 library works great with this board // Communicates over SPI plus a single CS pin // RJ-45 jack with activity and link lights // Wireless is wonderful, but sometimes you want the strong reliability of a wire. If your Feather board is going to be part of a permanent installation, this Ethernet FeatherWing will let you add quick and easy wired Internet. Just plug in a standard ethernet cable, and run the Ethernet2 library for cross-platform networking. Ethernet is a tried-and-true networking standard. It's supported by every hub and switch, and because there's a physical connection you don't have to noodle around with SSIDs, passwords, authentication schemes or antennas. It works great with any of our Feathers, the WIZ5500 chip communicates over SPI plus a single CS pin. The Arduino Ethernet2 library works great, and within a few seconds after connecting, will do the DHCP setup for you. As a nice extra, the RJ-45 jack has both link and activity lights that will light/blink to let you know the current connection status. This Wing does not support active Power-over-Ethernet (PoE), but you can easily hook up a passive PoE configuration with a passive injector, a 5V power adapter, and a 2.1mm to MicroUSB cable. See the tutorial page for more details Each order comes with one assembled and tested Ethernet FeatherWing, plus some header. You will need to solder in the header yourself but its a quick task...
  • Teensy   2.0
    Precio:  $6,149.00

    Teensy 2.0

    -Titulo Original : Teensy++ 2.0-Fabricante : PJRC-Descripcion Original: 8-Bit AVR Processor (AT90USB1286) // 128K Flash Memory, 8K RAM, 4K EEPROM // USB Can Emulate Any Type of Device // Single Pushbutton Programming // Arduino Compatible // The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy++ breaks out all of the IO available on the AT90USB1286 to breadboard-friendly 0.1 spaced headers so you can hook up a load of peripherals.The Teensy++ comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program the Teensy in your favorite IDE using C you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!  2 x 0.7 (50.8 x 17.8 mm)8-Bit AVR Processor (AT90USB1286)128K Flash Memory, 8K RAM, 4K EEPROMUSB Can Emulate Any Type of DeviceSingle Pushbutton ProgrammingArduino Compatible8 Analog Inputs46 Digital I/O Pins9 PWM outputsSPI and I2...
  • Camara Lente Gran Angular 2.0mp Esp32 Con Oled 0.96 Ov2640
    Precio:  $6,999.00

    Camara Lente Gran Angular 2.0mp Esp32 Con Oled 0.96 Ov2640

    -Titulo Original : MakerHawk ESP32 Camera Module T-Camera ESP32 WROVER PSRAM Camera Module 4MBytes SPRAM ESP32-WROVER-B OV2640 Camera Module with 0.96 Inch OLED-Fish-Eye Lens-Fabricante : MakerHawk-Descripcion Original: ★ Protocolo: Wi-Fi 802.11 b / g / n Bluetooth 4.2 BLE BR / EDR. Alta sensibilidad y bajo voltaje para aplicaciones integradas. Interfaz estándar SCCB, compatible con la interfaz IIC. ★ Admite formatos de salida RGB (RGB565 / RGB555), GRB422, YUV (422/420) e YCbCr (422). Admite zoom de imagen, configuración de panorámica y ventana. Admite compresión de imagen, puede generar datos de imagen JPEG. Viene con un microprocesador incorporado. ★ Chip principal: esp32 de doble núcleo. Chip de pantalla: SSD1306 I2C. Tipo de pantalla: OLED. Resolución de pantalla: 128x64. Resolución de la cámara: 2 megapíxeles (dos millones). Cámara (modelo de cámara): OV2640. Master Chip: esp32 dual-core Protocol: Wi-Fi 802.11 b/g/n andamp; Bluetooth 4.2 BLE andamp; BR/EDR Flash: 4MBytes SPRAM: 4MBytes Display chip: SSD1306 I2C Display type: OLED Display resolution: 128x64 PIR: AS312 Uart Chip: CP2104 Charging chip: IP5306 I2C Camera: OV2640 Camera Resolution: 2Megapixel Environmental Sensor: BME28...
  • Adafruit 4115 Zero4u - 4 Port Usb Hub Without Pogo Pins V1.3
    Precio:  $3,469.00

    Adafruit 4115 Zero4u - 4 Port Usb Hub Without Pogo Pins V1.3

    -Titulo Original : Adafruit 4115 Zero4U - 4 Port USB Hub Without Pogo Pins v1.3-Fabricante : ADAFRUIT-Descripcion Original: Power Mode: Bus-Power / Self-Power // Standards: USB 2.0 and 1.1 compatibility // Working Voltage: 5V DC // Static Current: 1mA // Maximum Output Current: 2A for all ports in self-power mode, 500mA for all ports in bus-power mode // One can never have enough socks, or USB ports. Add some more USB capability to your Raspberry Pi Zero, or any other single-board computer with the Zero4U! This is a 4-port USB 2.0 hub, almost identical to this one, but without the ferrite bead, standoffs or pogo pins. This might be a preferable format if you want to mount it on the bottom or side-by-side or with another HAT below it. It's also great as-is as a small USB hub. Since this version does not have the pogo pins, we recommend using the onboard mini-USB port to the up-stream USB port, which will provide power and data. Or, you can solder to the test pads or use the JST XH2.54 connector on board as the power input port. The blue onboard LED is the power indicator, and will light up when power is connected. Each USB port uses a dedicated white LED as a transaction indicator, and a dedicated electrolytic capacitor to help stabilize the output voltage. Note: This is just the USB hub board...
  • Feetech Fs90r Micro Servo De Rotacion Continua Con Rueda Xs
    Precio:  $5,379.00

    Feetech Fs90r Micro Servo De Rotacion Continua Con Rueda Xs

    -Titulo Original : Geekstory Feetech FS90R 360 Degree Continuous Rotation Micro Servo with RC Wheel Tire (4 Pack) -Fabricante : Geekstory -Descripcion Original: Recibirá 4pcs Feetech 360 grados de rotación continua servo y 4pcs rueda. Este servo de pies tiene certificado CE y ROHS. La velocidad de operación es 110RPM (4.8V), 130RPM (6V), pero puede cambiar el pwm para cambiar la velocidad del servo, para hacerlo más lento o más rápido Servo de par de torsión: 1.3kg.cm/18.09oz.in(4.8V), 1.5kg.cm/20.86oz.in(6V). Esta rueda de plástico negro se ajusta a presión en el eje del engranaje de salida FS90R y es fácil de hacer una buena solución de manejo para robots pequeños...
  • Ttgo T-camera Esp32-wrover-b Ov2640 Modulo De Camara Esp3...
    Precio:  $4,389.00

    Ttgo T-camera Esp32-wrover-b Ov2640 Modulo De Camara Esp3...

    -Titulo Original : TTGO T-Camera ESP32-WROVER-B OV2640 Camera Module ESP32 WROVER & PSRAM Camera Module 0.96 OLED ESP32-WROVER (Normal)-Fabricante : TTGO-Descripcion Original: Size: T-Camera specification Master Chip: esp32 dual-core Protocol: Wi-Fi 802.11 b/g/n & Bluetooth 4.2 BLE & BR/EDR Flash: 4MBytes PSRAM: 8MBytes Display chip: SSD1306 I2C Display type: OLED Display resolution: 128x64 PIR: AS312 Uart Chip: CP2104 Charging chip: IP5306 I2C Camera: OV2640 Camera Resolution: 2Megapixe...
  • Arduino Kit ELEGOO (1ERP6WL4)
    Precio:  $3,219.00

    Arduino Kit ELEGOO (1ERP6WL4)

    -Titulo Original : ELEGOO Electronic Fun Kit Bundle with Breadboard Cable Resistor, Capacitor, LED, Potentiometer (235 Items) for Arduino, Respberry Pi-Fabricante : ELEGOO-Descripcion Original: This kit has all the components you need to start your projects for Arduino or Raspberry Pi and other microcontrollers // With more than 200Pcs components // With a precision potentiometer, better quality, power supply module and breadboard // With jumper wire and f-m DuPont wire // Not including the controller board // Color: Established in 2011, ELEGOO is a thriving technology company dedicated to open-source hardware research & development, production and marketing. Our own Quality Management Team will secure the premium quality of our products and we would like to receive your valuable suggestions for our products and make your idea come true listing: 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs 400 tie-points Breadboard 1pcs 65 Jumper Wire 20pcs Female-to-male DuPont Wire 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs Precision Potentiometer 1pcs IC 4N35 1pcs IC 74HC595 5pcs Diode Rectifier (1N4007) 5pcs NPN Transistor (PN2222) 2pcs Photoresist or 1pcs Thermistor 10pcs Button (small) 10pcs White LED 10pcs Yellow LED 10pcs Blue LED 10pcs Green LED 10pcs Red LED 1pcs RGB LED 2pcs Pin header (40pin) 10pcs 22pf Ceramic Capacitor 10pcs 104 Ceramic Capacitor 5pcs Electrolytic Capacitor (10UF 50V) 5pcs Electrolytic Capacitor (100UF 50V) 10pcs Resistor (10R) 10pcs Resistor (100R) 30pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M)...
  • SMAKN 5V a 3.3V, 3.3V a 5V Adaptador de módulo convertidor de nivel de UIC 4 vías para Arduino
    Precio:  $1,489.00

    SMAKN 5V a 3.3V, 3.3V a 5V Adaptador de módulo convertidor de nivel de UIC 4 vías para Arduino

    -Titulo Original : SMAKNÂ 5V to 3.3V, 3.3V to 5V IIC Uart Level Converter Module Adapter 4 Way for Arduino-Fabricante : SMAKN-Descripcion Original: Four MOS tube achieve the four road 3 v and 5 v level bidirectional conversion. // Power input tape counter-attack joint protection, integrated 3.3 VLDO, and can provide is not more than 150 mA current. // With power light, work or not be clear at a glance. // Can realize UART, IIC, 1 - wire, SPI bus signals such as bidirectional conversion. // *Four MOS tube achieve the four road 3 v and 5 v level bidirectional conversion. *Power input tape counter-attack joint protection, integrated 3.3 VLDO, and can provide is not more than 150 mA current. *With power light, work or not be clear at a glance. *Can realize UART, IIC, 1 - wire, SPI bus signals such as bidirectional conversion. *Size:16mm*16mm. Feedback: We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem.Thank you very much...
  • codificador USB Arcade Zero Delay a Joystick para Mame Jamma
    Precio:  $2,809.00

    codificador USB Arcade Zero Delay a Joystick para Mame Jamma

    -Titulo Original : Reyann Zero Delay Arcade USB Encoder Pc to Joystick for Mame Jamma & Other Pc Fighting Games-Fabricante : Reyann-Descripcion Original: Zero Delay Arcade USB Encoder For Your Pc Game DIY! Generic Game Controller support PC & Raspberry Pi 1/2/3 Use this Encoder you can build your own Arcade Game Machine! 100% Zero Delay USB Encoder to Arcade Joystick! High Quality! Support All Joystick and Push Button types which with 4.8mm Terminal...
  • MakerFocus M5Stack TOF Módulo de unidad Módulo de s (Z5QM)
    Precio:  $4,039.00

    MakerFocus M5Stack TOF Módulo de unidad Módulo de s (Z5QM)

    -Titulo Original : MakerFocus ESP32 OLED WiFi Kit ESP-32 0.96 Inch OLED Display WiFi+Bluetooth CP2102 Internet Development Board for Arduino ESP8266 NodeMCU-Fabricante : MAKERFOCUS-Descripcion Original: Note: This item comes unassembled, soldering of headers is required. Can lithium battery powered, the lithium battery is not included, battery may be purchased here: https://www.amazon.com/dp/B079M2W85C. Link to download English documentation and pinout diagram: https://www.adrive.com/public/drzr3P/datasheet%20F000905.rar; https://drive.google.com/open?id=0B8DSGdAr8_31d19WQmN6SE1fLVE; GitHub: https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series // 2. ESP32 development board, Support arduino IDE, WIFI 802.11 b/g/n/e/i, Transmit power: 19.5 dBm 11b, 16.5 dBm 11g, 15.5 dBm 11n // ESP32 OLED, development board with 0.96inch OLED display; UDP continues to throughput by 135 Mbps, Receiver sensitivity up to - 98 dBm, Supports Sniffer, Station, softAP and Wi-Fi Direct modes // Integrated dual-mode bluetooth( traditional bluetooth and BLE low power bluetooth) // We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking for your consultation! // WIFI Kit series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth). Onboard 4MByte(32M-bit) Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development environment Operating voltage: 3.3V to 7V Operating temperature range: -40 ° C to + 90 ° C Data rate: 150 Mbps 11n HT40,72 Mbps 11n HT20,54 Mbps 11g, 11 Mbps 11b Transmit power: 19.5 dBm 11b, 16.5 dBm 11g, 15.5 dBm 11n Flash Size: 4MByte(32M-bit) Module Size:50*25.4*10.3 mm Lithium battery interface:2Pin-1.25mm interface Receiver sensitivity up to - 98 dBm UDP continues to throughput by 135 Mbps Supports Sniffer, Station, softAP and Wi-Fi Direct modes 1 * ESP32 Development Board with OLED 2 * Pin header...
Mostrar del 1 al 24 (de 138 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]